! Started logfile: J0413-0615_S_2017_03_23_pus_uvs.log on Mon May 13 09:47:51 2019 obs J0413-0615_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0413-0615_S_2017_03_23_pus_uva.fits ! AN table 1: 231 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.700722 visibilities/baseline/integration-bin. ! Found source: J0413-0615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 29136 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0413-0615_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 536 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 612 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 785 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1381 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991882Jy sigma=0.007736 ! Fit after self-cal, rms=0.955865Jy sigma=0.007481 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=6.781 mas, bpa=-4.681 degrees ! Estimated noise=850.084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377018 Jy ! Component: 100 - total flux cleaned = 0.046177 Jy ! Total flux subtracted in 100 components = 0.046177 Jy ! Clean residual min=-0.003429 max=0.003893 Jy/beam ! Clean residual mean=-0.000003 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.046177 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.046177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090907Jy sigma=0.000648 ! Fit after self-cal, rms=0.089840Jy sigma=0.000639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=7.638 mas, bpa=-3.508 degrees ! Estimated noise=612.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281786 Jy ! Component: 100 - total flux cleaned = 0.00400251 Jy ! Component: 150 - total flux cleaned = 0.00433779 Jy ! Component: 200 - total flux cleaned = 0.00435838 Jy ! Total flux subtracted in 200 components = 0.00435838 Jy ! Clean residual min=-0.002355 max=0.002522 Jy/beam ! Clean residual mean=0.000000 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0505353 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.0505353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089695Jy sigma=0.000639 ! Fit after self-cal, rms=0.089669Jy sigma=0.000639 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 1.00 KP 1.07 ! LA 1.06 MK 1.03 NL 0.89 OV 1.14 ! PT 1.08 SC 0.95 ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.14 HN 1.03 KP 1.06 ! LA 0.98 MK 1.01 NL 1.00 OV 1.11 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.08 HN 1.00 KP 0.94 ! LA 0.77 MK 1.08 NL 1.02 OV 1.11 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 4. ! A total of 123 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.19 HN 0.73 KP 1.00* ! LA 0.65 MK 1.04 NL 1.00* OV 1.11 ! PT 0.87 SC 1.00* ! ! ! Fit before self-cal, rms=0.089669Jy sigma=0.000639 ! Fit after self-cal, rms=0.086088Jy sigma=0.000633 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=7.624 mas, bpa=-3.579 degrees ! Estimated noise=624.095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.82294e-05 Jy ! Component: 100 - total flux cleaned = -5.98135e-05 Jy ! Component: 150 - total flux cleaned = -7.98666e-05 Jy ! Component: 200 - total flux cleaned = -0.000133533 Jy ! Total flux subtracted in 200 components = -0.000133533 Jy ! Clean residual min=-0.001922 max=0.001648 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0504018 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0504018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086076Jy sigma=0.000633 ! Fit after self-cal, rms=0.086027Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086027Jy sigma=0.000633 ! Fit after self-cal, rms=0.085572Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.575 mas, bpa=-3.528 degrees ! Estimated noise=626.918 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155781 Jy ! Component: 100 - total flux cleaned = 0.000176557 Jy ! Component: 150 - total flux cleaned = 0.000177501 Jy ! Component: 200 - total flux cleaned = 0.000190987 Jy ! Total flux subtracted in 200 components = 0.000190987 Jy ! Clean residual min=-0.001637 max=0.001599 Jy/beam ! Clean residual mean=0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0505928 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0505928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085565Jy sigma=0.000631 ! Fit after self-cal, rms=0.085570Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.95575e-05 Jy ! Component: 100 - total flux cleaned = -9.93752e-05 Jy ! Component: 150 - total flux cleaned = -0.000125743 Jy ! Component: 200 - total flux cleaned = -0.000149115 Jy ! Total flux subtracted in 200 components = -0.000149115 Jy ! Clean residual min=-0.001721 max=0.001610 Jy/beam ! Clean residual mean=0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0504437 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.0504437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085565Jy sigma=0.000631 ! Fit after self-cal, rms=0.085560Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085560Jy sigma=0.000631 ! Fit after self-cal, rms=0.085795Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=7.553 mas, bpa=-3.502 degrees ! Estimated noise=624.568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165412 Jy ! Component: 100 - total flux cleaned = -0.000175605 Jy ! Component: 150 - total flux cleaned = -0.000185448 Jy ! Component: 200 - total flux cleaned = -0.000202854 Jy ! Total flux subtracted in 200 components = -0.000202854 Jy ! Clean residual min=-0.001673 max=0.001559 Jy/beam ! Clean residual mean=0.000002 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0502408 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0502408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085792Jy sigma=0.000630 ! Fit after self-cal, rms=0.085843Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.1842e-05 Jy ! Component: 100 - total flux cleaned = -9.06206e-05 Jy ! Component: 150 - total flux cleaned = -0.000107723 Jy ! Component: 200 - total flux cleaned = -0.000123663 Jy ! Total flux subtracted in 200 components = -0.000123663 Jy ! Clean residual min=-0.001665 max=0.001610 Jy/beam ! Clean residual mean=0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0501172 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.0501172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085841Jy sigma=0.000629 ! Fit after self-cal, rms=0.085841Jy sigma=0.000629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085841Jy sigma=0.000629 ! Fit after self-cal, rms=0.086140Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.193 mas, bmaj=12.78 mas, bpa=2.163 degrees ! Estimated noise=812.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100528 Jy ! Component: 100 - total flux cleaned = -9.11264e-05 Jy ! Component: 150 - total flux cleaned = -9.02961e-05 Jy ! Component: 200 - total flux cleaned = -0.000103499 Jy ! Total flux subtracted in 200 components = -0.000103499 Jy ! Clean residual min=-0.001772 max=0.001731 Jy/beam ! Clean residual mean=0.000004 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0500137 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.0500137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086139Jy sigma=0.000629 ! Fit after self-cal, rms=0.086173Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129145 Jy ! Component: 100 - total flux cleaned = -0.000130818 Jy ! Component: 150 - total flux cleaned = -0.000136525 Jy ! Component: 200 - total flux cleaned = -0.000147229 Jy ! Total flux subtracted in 200 components = -0.000147229 Jy ! Clean residual min=-0.001807 max=0.001758 Jy/beam ! Clean residual mean=0.000004 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0498664 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.0498664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086173Jy sigma=0.000629 ! Fit after self-cal, rms=0.086155Jy sigma=0.000629 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.547 mas, bpa=-3.484 degrees ! Estimated noise=624.292 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.119 x 7.547 at -3.484 degrees (North through East) ! Clean map min=-0.0020226 max=0.049532 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=6.79 mas, bpa=-4.798 degrees ! Estimated noise=840.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380764 Jy ! Component: 100 - total flux cleaned = 0.0463843 Jy ! Component: 150 - total flux cleaned = 0.0473499 Jy ! Component: 200 - total flux cleaned = 0.048091 Jy ! Total flux subtracted in 200 components = 0.048091 Jy ! Clean residual min=-0.002506 max=0.002123 Jy/beam ! Clean residual mean=0.000001 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.048091 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.048091 Jy ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.547 mas, bpa=-3.484 degrees ! Estimated noise=624.292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128637 Jy ! Component: 100 - total flux cleaned = 0.00154892 Jy ! Component: 150 - total flux cleaned = 0.00160872 Jy ! Component: 200 - total flux cleaned = 0.00163473 Jy ! Total flux subtracted in 200 components = 0.00163473 Jy ! Clean residual min=-0.001691 max=0.001622 Jy/beam ! Clean residual mean=0.000002 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0497257 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0497257 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.193 mas, bmaj=12.78 mas, bpa=2.163 degrees ! Estimated noise=812.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208247 Jy ! Component: 100 - total flux cleaned = 0.000186434 Jy ! Component: 150 - total flux cleaned = 0.000166008 Jy ! Component: 200 - total flux cleaned = 0.000137776 Jy ! Total flux subtracted in 200 components = 0.000137776 Jy ! Clean residual min=-0.001859 max=0.001781 Jy/beam ! Clean residual mean=0.000004 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0498635 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.69296e-05 Jy ! Component: 100 - total flux cleaned = -4.03038e-05 Jy ! Component: 150 - total flux cleaned = -5.42576e-05 Jy ! Component: 200 - total flux cleaned = -6.72849e-05 Jy ! Total flux subtracted in 200 components = -6.72849e-05 Jy ! Clean residual min=-0.001860 max=0.001791 Jy/beam ! Clean residual mean=0.000004 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0497962 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.0497962 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.547 mas, bpa=-3.484 degrees ! Estimated noise=624.292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.17389e-05 Jy ! Component: 100 - total flux cleaned = -0.000149005 Jy ! Component: 150 - total flux cleaned = -0.000207514 Jy ! Component: 200 - total flux cleaned = -0.000221067 Jy ! Total flux subtracted in 200 components = -0.000221067 Jy ! Clean residual min=-0.001690 max=0.001616 Jy/beam ! Clean residual mean=0.000002 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0495751 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.0495751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086159Jy sigma=0.000629 ! Fit after self-cal, rms=0.086160Jy sigma=0.000629 wmodel J0413-0615_S_2017_03_23_pus_map.mod ! Writing 46 model components to file: J0413-0615_S_2017_03_23_pus_map.mod wobs J0413-0615_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0413-0615_S_2017_03_23_pus_uvs.fits wwins J0413-0615_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J0413-0615_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268171 Jy ! Component: 100 - total flux cleaned = -0.000613532 Jy ! Component: 150 - total flux cleaned = -0.000688561 Jy ! Component: 200 - total flux cleaned = -0.000712908 Jy ! Component: 250 - total flux cleaned = -0.000689845 Jy ! Component: 300 - total flux cleaned = -0.000644816 Jy ! Component: 350 - total flux cleaned = -0.000579257 Jy ! Component: 400 - total flux cleaned = -0.000515995 Jy ! Component: 450 - total flux cleaned = -0.000475084 Jy ! Component: 500 - total flux cleaned = -0.000435682 Jy ! Component: 550 - total flux cleaned = -0.000377069 Jy ! Component: 600 - total flux cleaned = -0.000319926 Jy ! Component: 650 - total flux cleaned = -0.000225287 Jy ! Component: 700 - total flux cleaned = -0.000150753 Jy ! Component: 750 - total flux cleaned = -5.9197e-05 Jy ! Component: 800 - total flux cleaned = -2.31901e-05 Jy ! Component: 850 - total flux cleaned = 4.78485e-05 Jy ! Component: 900 - total flux cleaned = 6.55547e-05 Jy ! Component: 950 - total flux cleaned = 0.000100308 Jy ! Component: 1000 - total flux cleaned = 0.000117653 Jy ! Component: 1050 - total flux cleaned = 0.000134342 Jy ! Component: 1100 - total flux cleaned = 0.000150763 Jy ! Component: 1150 - total flux cleaned = 0.000166931 Jy ! Component: 1200 - total flux cleaned = 0.000182793 Jy ! Component: 1250 - total flux cleaned = 0.000135348 Jy ! Component: 1300 - total flux cleaned = 0.000182228 Jy ! Component: 1350 - total flux cleaned = 0.00010509 Jy ! Component: 1400 - total flux cleaned = 0.000120531 Jy ! Component: 1450 - total flux cleaned = 7.55356e-05 Jy ! Component: 1500 - total flux cleaned = 9.04725e-05 Jy ! Component: 1550 - total flux cleaned = 3.14136e-05 Jy ! Component: 1600 - total flux cleaned = -2.68809e-05 Jy ! Component: 1650 - total flux cleaned = -4.15407e-05 Jy ! Component: 1700 - total flux cleaned = -8.43411e-05 Jy ! Component: 1750 - total flux cleaned = -0.000126592 Jy ! Component: 1800 - total flux cleaned = -0.000154563 Jy ! Component: 1850 - total flux cleaned = -0.000140659 Jy ! Component: 1900 - total flux cleaned = -0.000181764 Jy ! Component: 1950 - total flux cleaned = -0.000222439 Jy ! Component: 2000 - total flux cleaned = -0.000249183 Jy ! Component: 2050 - total flux cleaned = -0.000249233 Jy ! Component: 2100 - total flux cleaned = -0.000275416 Jy ! Component: 2150 - total flux cleaned = -0.000353734 Jy ! Component: 2200 - total flux cleaned = -0.000340674 Jy ! Component: 2250 - total flux cleaned = -0.0003919 Jy ! Component: 2300 - total flux cleaned = -0.000417322 Jy ! Component: 2350 - total flux cleaned = -0.000442562 Jy ! Component: 2400 - total flux cleaned = -0.00044267 Jy ! Component: 2450 - total flux cleaned = -0.000479732 Jy ! Component: 2500 - total flux cleaned = -0.000479505 Jy ! Component: 2550 - total flux cleaned = -0.000516049 Jy ! Component: 2600 - total flux cleaned = -0.000503847 Jy ! Component: 2650 - total flux cleaned = -0.000539689 Jy ! Component: 2700 - total flux cleaned = -0.000563444 Jy ! Component: 2750 - total flux cleaned = -0.000598577 Jy ! Component: 2800 - total flux cleaned = -0.000645297 Jy ! Component: 2850 - total flux cleaned = -0.000587392 Jy ! Component: 2900 - total flux cleaned = -0.000656456 Jy ! Component: 2950 - total flux cleaned = -0.000656583 Jy ! Component: 3000 - total flux cleaned = -0.000667937 Jy ! Component: 3050 - total flux cleaned = -0.000724324 Jy ! Component: 3100 - total flux cleaned = -0.000757837 Jy ! Component: 3150 - total flux cleaned = -0.000779934 Jy ! Component: 3200 - total flux cleaned = -0.000780046 Jy ! Component: 3250 - total flux cleaned = -0.000812885 Jy ! Component: 3300 - total flux cleaned = -0.00080204 Jy ! Component: 3350 - total flux cleaned = -0.000845242 Jy ! Component: 3400 - total flux cleaned = -0.000866546 Jy ! Component: 3450 - total flux cleaned = -0.000909131 Jy ! Component: 3500 - total flux cleaned = -0.000951377 Jy ! Component: 3550 - total flux cleaned = -0.00100381 Jy ! Component: 3600 - total flux cleaned = -0.00101417 Jy ! Component: 3650 - total flux cleaned = -0.00108653 Jy ! Component: 3700 - total flux cleaned = -0.00111731 Jy ! Component: 3750 - total flux cleaned = -0.00115814 Jy ! Component: 3800 - total flux cleaned = -0.00118862 Jy ! Component: 3850 - total flux cleaned = -0.00119873 Jy ! Component: 3900 - total flux cleaned = -0.00124885 Jy ! Component: 3950 - total flux cleaned = -0.00130863 Jy ! Component: 4000 - total flux cleaned = -0.00132852 Jy ! Component: 4050 - total flux cleaned = -0.00134828 Jy ! Total flux subtracted in 4096 components = -0.00137762 Jy ! Clean residual min=-0.000521 max=0.000494 Jy/beam ! Clean residual mean=0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.0481975 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 354 components and 0.0481975 Jy ![Exited script file: muppet] wmap "J0413-0615_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.119 x 7.547 at -3.484 degrees (North through East) ! Clean map min=-0.0022263 max=0.049487 Jy/beam ! Writing clean map to FITS file: J0413-0615_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.049487 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183833 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11443 1.11443 2.22887 4.45773 8.91546 17.8309 35.6618 71.3237 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.119 x 7.547 at -3.484 degrees (North through East) ! Clean map min=-0.0022263 max=0.049487 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0413-0615_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:47:57 2019