! Started logfile: J0412+0010_X_2017_06_10_pus_uvs.log on Mon May 6 12:42:23 2019 obs J0412+0010_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0412+0010_X_2017_06_10_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975117 visibilities/baseline/integration-bin. ! Found source: J0412+0010 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 74772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0412+0010_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.922023Jy sigma=0.008113 ! Fit after self-cal, rms=0.905602Jy sigma=0.007970 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6956 mas, bmaj=1.706 mas, bpa=-0.5904 degrees ! Estimated noise=665.467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0742436 Jy ! Component: 100 - total flux cleaned = 0.0906167 Jy ! Total flux subtracted in 100 components = 0.0906167 Jy ! Clean residual min=-0.002815 max=0.006732 Jy/beam ! Clean residual mean=-0.000009 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.0906167 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0906167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080458Jy sigma=0.000676 ! Fit after self-cal, rms=0.080454Jy sigma=0.000676 ! Inverting map ! Added new window around map position (-0.2, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702828 Jy ! Component: 100 - total flux cleaned = 0.0115645 Jy ! Total flux subtracted in 100 components = 0.0115645 Jy ! Clean residual min=-0.002436 max=0.003506 Jy/beam ! Clean residual mean=-0.000002 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.102181 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 19 components and 0.102181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079609Jy sigma=0.000668 ! Fit after self-cal, rms=0.079582Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8668 mas, bmaj=2.01 mas, bpa=-1.382 degrees ! Estimated noise=296.254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526407 Jy ! Component: 100 - total flux cleaned = 0.00852143 Jy ! Component: 150 - total flux cleaned = 0.0106927 Jy ! Component: 200 - total flux cleaned = 0.0121902 Jy ! Total flux subtracted in 200 components = 0.0121902 Jy ! Clean residual min=-0.001370 max=0.003083 Jy/beam ! Clean residual mean=0.000005 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.114371 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 41 components and 0.114371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079214Jy sigma=0.000664 ! Fit after self-cal, rms=0.079205Jy sigma=0.000664 ! Inverting map ! Added new window around map position (-1.8, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028628 Jy ! Component: 100 - total flux cleaned = 0.00415122 Jy ! Component: 150 - total flux cleaned = 0.00450167 Jy ! Component: 200 - total flux cleaned = 0.00463597 Jy ! Total flux subtracted in 200 components = 0.00463597 Jy ! Clean residual min=-0.001119 max=0.001618 Jy/beam ! Clean residual mean=0.000003 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.119007 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.119007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079098Jy sigma=0.000663 ! Fit after self-cal, rms=0.079084Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 0.99 ! LA 1.00 MK 0.99 NL 0.96 OV 0.99 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.99 KP 0.98 ! LA 0.97 MK 1.00 NL 0.99 OV 0.99 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.98 KP 1.00 ! LA 1.02 MK 1.01 NL 0.99 OV 0.99 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.01 KP 0.99 ! LA 1.02 MK 1.02 NL 0.97 OV 0.98 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 0.99 KP 0.98 ! LA 1.01 MK 1.05 NL 0.97 OV 0.99 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.99 KP 0.96 ! LA 1.00 MK 1.02 NL 1.01 OV 0.99 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.98 KP 1.00 ! LA 1.01 MK 1.02 NL 0.96 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.96 KP 0.98 ! LA 1.01 MK 0.98 NL 0.98 OV 0.98 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.97 KP 0.99 ! LA 0.99 MK 1.00 NL 1.00 OV 1.01 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.99 KP 0.97 ! LA 1.05 MK 1.02 NL 0.97 OV 1.01 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.02 KP 0.99 ! LA 1.04 MK 1.01 NL 1.00 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.95 KP 0.98 ! LA 0.99 MK 1.01 NL 0.99 OV 1.00 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.079084Jy sigma=0.000663 ! Fit after self-cal, rms=0.078528Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8692 mas, bmaj=2.013 mas, bpa=-1.377 degrees ! Estimated noise=295.051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.6, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015052 Jy ! Component: 100 - total flux cleaned = 0.00243777 Jy ! Component: 150 - total flux cleaned = 0.00301289 Jy ! Component: 200 - total flux cleaned = 0.0033208 Jy ! Total flux subtracted in 200 components = 0.0033208 Jy ! Clean residual min=-0.000846 max=0.000918 Jy/beam ! Clean residual mean=0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.122328 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 86 components and 0.122328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078493Jy sigma=0.000662 ! Fit after self-cal, rms=0.078495Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078495Jy sigma=0.000662 ! Fit after self-cal, rms=0.078773Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8689 mas, bmaj=2.013 mas, bpa=-1.374 degrees ! Estimated noise=295.568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587149 Jy ! Component: 100 - total flux cleaned = 0.000883574 Jy ! Component: 150 - total flux cleaned = 0.00105972 Jy ! Component: 200 - total flux cleaned = 0.00108693 Jy ! Total flux subtracted in 200 components = 0.00108693 Jy ! Clean residual min=-0.000678 max=0.000850 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.123415 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 113 components and 0.123415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078766Jy sigma=0.000662 ! Fit after self-cal, rms=0.078771Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.6, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549445 Jy ! Component: 100 - total flux cleaned = 0.000688256 Jy ! Component: 150 - total flux cleaned = 0.000741021 Jy ! Component: 200 - total flux cleaned = 0.000729276 Jy ! Total flux subtracted in 200 components = 0.000729276 Jy ! Clean residual min=-0.000680 max=0.000629 Jy/beam ! Clean residual mean=0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.124144 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 127 components and 0.124144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078763Jy sigma=0.000662 ! Fit after self-cal, rms=0.078763Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078763Jy sigma=0.000662 ! Fit after self-cal, rms=0.078937Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8689 mas, bmaj=2.013 mas, bpa=-1.372 degrees ! Estimated noise=296.079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339492 Jy ! Component: 100 - total flux cleaned = 0.000405041 Jy ! Component: 150 - total flux cleaned = 0.000417357 Jy ! Component: 200 - total flux cleaned = 0.000407157 Jy ! Total flux subtracted in 200 components = 0.000407157 Jy ! Clean residual min=-0.000652 max=0.000638 Jy/beam ! Clean residual mean=-0.000000 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.124552 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.124552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078934Jy sigma=0.000661 ! Fit after self-cal, rms=0.078937Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015354 Jy ! Component: 100 - total flux cleaned = 0.00016337 Jy ! Component: 150 - total flux cleaned = 0.000172737 Jy ! Component: 200 - total flux cleaned = 0.000164204 Jy ! Total flux subtracted in 200 components = 0.000164204 Jy ! Clean residual min=-0.000654 max=0.000638 Jy/beam ! Clean residual mean=-0.000000 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.124716 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 142 components and 0.124716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078935Jy sigma=0.000661 ! Fit after self-cal, rms=0.078935Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078935Jy sigma=0.000661 ! Fit after self-cal, rms=0.079012Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.125 mas, bmaj=3.312 mas, bpa=-2.354 degrees ! Estimated noise=382.186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.99327e-05 Jy ! Component: 100 - total flux cleaned = 1.66803e-05 Jy ! Component: 150 - total flux cleaned = -3.76236e-06 Jy ! Component: 200 - total flux cleaned = -3.56709e-06 Jy ! Total flux subtracted in 200 components = -3.56709e-06 Jy ! Clean residual min=-0.000772 max=0.000601 Jy/beam ! Clean residual mean=-0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.124712 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 166 components and 0.124712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079011Jy sigma=0.000661 ! Fit after self-cal, rms=0.079011Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.32596e-05 Jy ! Component: 100 - total flux cleaned = 3.70579e-05 Jy ! Component: 150 - total flux cleaned = 4.37163e-05 Jy ! Component: 200 - total flux cleaned = 3.17549e-05 Jy ! Total flux subtracted in 200 components = 3.17549e-05 Jy ! Clean residual min=-0.000767 max=0.000598 Jy/beam ! Clean residual mean=-0.000000 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.124744 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 175 components and 0.124744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079011Jy sigma=0.000661 ! Fit after self-cal, rms=0.079011Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=2.012 mas, bpa=-1.36 degrees ! Estimated noise=296.425 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8688 x 2.012 at -1.36 degrees (North through East) ! Clean map min=-0.00072316 max=0.097576 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6979 mas, bmaj=1.707 mas, bpa=-0.5742 degrees ! Estimated noise=666.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0741718 Jy ! Component: 100 - total flux cleaned = 0.0909304 Jy ! Component: 150 - total flux cleaned = 0.098307 Jy ! Component: 200 - total flux cleaned = 0.103445 Jy ! Total flux subtracted in 200 components = 0.103445 Jy ! Clean residual min=-0.002135 max=0.002946 Jy/beam ! Clean residual mean=-0.000006 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.103445 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.103445 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=2.012 mas, bpa=-1.36 degrees ! Estimated noise=296.425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586515 Jy ! Component: 100 - total flux cleaned = 0.00972549 Jy ! Component: 150 - total flux cleaned = 0.0124598 Jy ! Component: 200 - total flux cleaned = 0.0144613 Jy ! Total flux subtracted in 200 components = 0.0144613 Jy ! Clean residual min=-0.000975 max=0.001167 Jy/beam ! Clean residual mean=-0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.117907 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 59 components and 0.117907 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154718 Jy ! Component: 100 - total flux cleaned = 0.00279001 Jy ! Component: 150 - total flux cleaned = 0.00380612 Jy ! Component: 200 - total flux cleaned = 0.00465305 Jy ! Total flux subtracted in 200 components = 0.00465305 Jy ! Clean residual min=-0.000746 max=0.000649 Jy/beam ! Clean residual mean=-0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.12256 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 83 components and 0.12256 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.125 mas, bmaj=3.312 mas, bpa=-2.354 degrees ! Estimated noise=382.186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113758 Jy ! Component: 100 - total flux cleaned = 0.00160197 Jy ! Component: 150 - total flux cleaned = 0.00182233 Jy ! Component: 200 - total flux cleaned = 0.00189082 Jy ! Total flux subtracted in 200 components = 0.00189082 Jy ! Clean residual min=-0.000960 max=0.000638 Jy/beam ! Clean residual mean=-0.000002 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.12445 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99392e-05 Jy ! Component: 100 - total flux cleaned = 5.49967e-05 Jy ! Component: 150 - total flux cleaned = 0.000101614 Jy ! Component: 200 - total flux cleaned = 0.000115345 Jy ! Total flux subtracted in 200 components = 0.000115345 Jy ! Clean residual min=-0.000843 max=0.000613 Jy/beam ! Clean residual mean=-0.000001 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.124566 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 139 components and 0.124566 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=2.012 mas, bpa=-1.36 degrees ! Estimated noise=296.425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.13351e-05 Jy ! Component: 100 - total flux cleaned = 5.68589e-05 Jy ! Component: 150 - total flux cleaned = 4.15272e-05 Jy ! Component: 200 - total flux cleaned = 5.4867e-05 Jy ! Total flux subtracted in 200 components = 5.4867e-05 Jy ! Clean residual min=-0.000669 max=0.000602 Jy/beam ! Clean residual mean=-0.000001 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.124621 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 159 components and 0.124621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079015Jy sigma=0.000661 ! Fit after self-cal, rms=0.079013Jy sigma=0.000661 wmodel J0412+0010_X_2017_06_10_pus_map.mod ! Writing 159 model components to file: J0412+0010_X_2017_06_10_pus_map.mod wobs J0412+0010_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0412+0010_X_2017_06_10_pus_uvs.fits wwins J0412+0010_X_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J0412+0010_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214688 Jy ! Component: 100 - total flux cleaned = -0.000289425 Jy ! Component: 150 - total flux cleaned = -0.000350153 Jy ! Component: 200 - total flux cleaned = -0.000428103 Jy ! Component: 250 - total flux cleaned = -0.000437485 Jy ! Component: 300 - total flux cleaned = -0.000428263 Jy ! Component: 350 - total flux cleaned = -0.000419379 Jy ! Component: 400 - total flux cleaned = -0.000401833 Jy ! Component: 450 - total flux cleaned = -0.000376043 Jy ! Component: 500 - total flux cleaned = -0.000359135 Jy ! Component: 550 - total flux cleaned = -0.000334283 Jy ! Component: 600 - total flux cleaned = -0.000302078 Jy ! Component: 650 - total flux cleaned = -0.000286308 Jy ! Component: 700 - total flux cleaned = -0.000278542 Jy ! Component: 750 - total flux cleaned = -0.000263233 Jy ! Component: 800 - total flux cleaned = -0.000278417 Jy ! Component: 850 - total flux cleaned = -0.000255924 Jy ! Component: 900 - total flux cleaned = -0.000270725 Jy ! Component: 950 - total flux cleaned = -0.000248917 Jy ! Component: 1000 - total flux cleaned = -0.00023467 Jy ! Component: 1050 - total flux cleaned = -0.000227622 Jy ! Component: 1100 - total flux cleaned = -0.000213641 Jy ! Component: 1150 - total flux cleaned = -0.000192876 Jy ! Component: 1200 - total flux cleaned = -0.000179293 Jy ! Component: 1250 - total flux cleaned = -0.00017935 Jy ! Component: 1300 - total flux cleaned = -0.000172599 Jy ! Component: 1350 - total flux cleaned = -0.000165975 Jy ! Component: 1400 - total flux cleaned = -0.000146415 Jy ! Component: 1450 - total flux cleaned = -0.00015286 Jy ! Component: 1500 - total flux cleaned = -0.000140034 Jy ! Component: 1550 - total flux cleaned = -0.000121051 Jy ! Component: 1600 - total flux cleaned = -0.000114811 Jy ! Component: 1650 - total flux cleaned = -8.99955e-05 Jy ! Component: 1700 - total flux cleaned = -7.77408e-05 Jy ! Component: 1750 - total flux cleaned = -6.55283e-05 Jy ! Component: 1800 - total flux cleaned = -4.13136e-05 Jy ! Component: 1850 - total flux cleaned = -5.92252e-05 Jy ! Component: 1900 - total flux cleaned = -2.95757e-05 Jy ! Component: 1950 - total flux cleaned = -1.19146e-05 Jy ! Component: 2000 - total flux cleaned = -2.35581e-05 Jy ! Total flux subtracted in 2048 components = 1.09863e-05 Jy ! Clean residual min=-0.000395 max=0.000380 Jy/beam ! Clean residual mean=-0.000001 rms=0.000111 Jy/beam ! Combined flux in latest and established models = 0.124632 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 306 components and 0.124632 Jy ![Exited script file: muppet] wmap "J0412+0010_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8688 x 2.012 at -1.36 degrees (North through East) ! Clean map min=-0.00054128 max=0.097759 Jy/beam ! Writing clean map to FITS file: J0412+0010_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0977586 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000110883 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.340277 0.340277 0.680554 1.36111 2.72222 5.44443 10.8889 21.7777 43.5555 87.1109 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.097 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8688 x 2.012 at -1.36 degrees (North through East) ! Clean map min=-0.00054128 max=0.097759 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0412+0010_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:42:28 2019