! Started logfile: J0411-2758_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:31:07 2019 obs J0411-2758_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0411-2758_S_2017_03_27_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959407 visibilities/baseline/integration-bin. ! Found source: J0411-2758 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 12952 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0411-2758_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 229 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915624Jy sigma=0.005801 ! Fit after self-cal, rms=0.895769Jy sigma=0.005693 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=6.915 mas, bpa=-7.656 degrees ! Estimated noise=1581.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0844313 Jy ! Component: 100 - total flux cleaned = 0.103209 Jy ! Total flux subtracted in 100 components = 0.103209 Jy ! Clean residual min=-0.005528 max=0.009398 Jy/beam ! Clean residual mean=-0.000021 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.103209 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.103209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119313Jy sigma=0.000680 ! Fit after self-cal, rms=0.119253Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=8.097 mas, bpa=-5.853 degrees ! Estimated noise=1065.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136717 Jy ! Component: 100 - total flux cleaned = 0.0209557 Jy ! Component: 150 - total flux cleaned = 0.0250399 Jy ! Component: 200 - total flux cleaned = 0.0272367 Jy ! Total flux subtracted in 200 components = 0.0272367 Jy ! Clean residual min=-0.003453 max=0.003950 Jy/beam ! Clean residual mean=-0.000025 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.130446 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 0.130446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117779Jy sigma=0.000669 ! Fit after self-cal, rms=0.117723Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.02 KP 1.06 ! LA 0.98 MK 1.01 NL 0.94 OV 1.08 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.06 KP 0.96 ! LA 0.93 MK 0.97 NL 1.10 OV 1.12 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.05 HN 1.45 KP 0.94 ! LA 0.97 MK 1.01 NL 0.96 OV 0.99 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.00 KP 1.00* ! LA 0.99 MK 1.04 NL 1.00* OV 0.91 ! PT 1.00 SC 0.81 ! ! ! Fit before self-cal, rms=0.117723Jy sigma=0.000668 ! Fit after self-cal, rms=0.118192Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.072 mas, bpa=-5.55 degrees ! Estimated noise=1058.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000915159 Jy ! Component: 100 - total flux cleaned = 0.000628839 Jy ! Component: 150 - total flux cleaned = 0.000485371 Jy ! Component: 200 - total flux cleaned = 0.000401453 Jy ! Total flux subtracted in 200 components = 0.000401453 Jy ! Clean residual min=-0.002726 max=0.002751 Jy/beam ! Clean residual mean=-0.000013 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.130847 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.130847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118124Jy sigma=0.000664 ! Fit after self-cal, rms=0.118086Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118086Jy sigma=0.000664 ! Fit after self-cal, rms=0.122361Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.06 mas, bpa=-5.373 degrees ! Estimated noise=1062.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000872064 Jy ! Component: 100 - total flux cleaned = 0.00106511 Jy ! Component: 150 - total flux cleaned = 0.00106628 Jy ! Component: 200 - total flux cleaned = 0.00103574 Jy ! Total flux subtracted in 200 components = 0.00103574 Jy ! Clean residual min=-0.002689 max=0.002668 Jy/beam ! Clean residual mean=-0.000013 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.131883 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.131883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122333Jy sigma=0.000663 ! Fit after self-cal, rms=0.122387Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165557 Jy ! Component: 100 - total flux cleaned = 7.69011e-05 Jy ! Component: 150 - total flux cleaned = 4.99486e-05 Jy ! Component: 200 - total flux cleaned = -2.0743e-06 Jy ! Total flux subtracted in 200 components = -2.0743e-06 Jy ! Clean residual min=-0.002669 max=0.002658 Jy/beam ! Clean residual mean=-0.000013 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.131881 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.131881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122373Jy sigma=0.000663 ! Fit after self-cal, rms=0.122372Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122372Jy sigma=0.000663 ! Fit after self-cal, rms=0.127402Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.064 mas, bpa=-5.35 degrees ! Estimated noise=1060.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246344 Jy ! Component: 100 - total flux cleaned = 0.000224287 Jy ! Component: 150 - total flux cleaned = 0.000183777 Jy ! Component: 200 - total flux cleaned = 0.000106665 Jy ! Total flux subtracted in 200 components = 0.000106665 Jy ! Clean residual min=-0.002562 max=0.002684 Jy/beam ! Clean residual mean=-0.000015 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.131987 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 89 components and 0.131987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127393Jy sigma=0.000662 ! Fit after self-cal, rms=0.127478Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.10061e-06 Jy ! Component: 100 - total flux cleaned = -4.91855e-05 Jy ! Component: 150 - total flux cleaned = -8.44682e-05 Jy ! Component: 200 - total flux cleaned = -0.000101208 Jy ! Total flux subtracted in 200 components = -0.000101208 Jy ! Clean residual min=-0.002459 max=0.002629 Jy/beam ! Clean residual mean=-0.000015 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.131886 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.131886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127471Jy sigma=0.000662 ! Fit after self-cal, rms=0.127472Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127472Jy sigma=0.000662 ! Fit after self-cal, rms=0.128173Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.003 mas, bmaj=19.92 mas, bpa=0.5917 degrees ! Estimated noise=1320.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271728 Jy ! Component: 100 - total flux cleaned = 0.000234984 Jy ! Component: 150 - total flux cleaned = 0.000218822 Jy ! Component: 200 - total flux cleaned = 0.000218107 Jy ! Total flux subtracted in 200 components = 0.000218107 Jy ! Clean residual min=-0.002982 max=0.002450 Jy/beam ! Clean residual mean=-0.000028 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.132104 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.132104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128169Jy sigma=0.000661 ! Fit after self-cal, rms=0.128184Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102836 Jy ! Component: 100 - total flux cleaned = 0.000102577 Jy ! Component: 150 - total flux cleaned = 0.000115558 Jy ! Component: 200 - total flux cleaned = 0.000115376 Jy ! Total flux subtracted in 200 components = 0.000115376 Jy ! Clean residual min=-0.003016 max=0.002455 Jy/beam ! Clean residual mean=-0.000028 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.13222 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 103 components and 0.13222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128182Jy sigma=0.000661 ! Fit after self-cal, rms=0.128184Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.064 mas, bpa=-5.325 degrees ! Estimated noise=1061.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 8.064 at -5.325 degrees (North through East) ! Clean map min=-0.0023552 max=0.10492 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=6.868 mas, bpa=-6.917 degrees ! Estimated noise=1581.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840747 Jy ! Component: 100 - total flux cleaned = 0.103657 Jy ! Component: 150 - total flux cleaned = 0.113085 Jy ! Component: 200 - total flux cleaned = 0.119239 Jy ! Total flux subtracted in 200 components = 0.119239 Jy ! Clean residual min=-0.004183 max=0.004264 Jy/beam ! Clean residual mean=-0.000014 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.119239 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.119239 Jy ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.064 mas, bpa=-5.325 degrees ! Estimated noise=1061.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062258 Jy ! Component: 100 - total flux cleaned = 0.00960949 Jy ! Component: 150 - total flux cleaned = 0.011556 Jy ! Component: 200 - total flux cleaned = 0.0120074 Jy ! Total flux subtracted in 200 components = 0.0120074 Jy ! Clean residual min=-0.002488 max=0.003081 Jy/beam ! Clean residual mean=-0.000017 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.131246 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 52 components and 0.131246 Jy ! Inverting map ! Added new window around map position (-26.5, -38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241219 Jy ! Component: 100 - total flux cleaned = 0.00251987 Jy ! Component: 150 - total flux cleaned = 0.00251958 Jy ! Component: 200 - total flux cleaned = 0.00256215 Jy ! Total flux subtracted in 200 components = 0.00256215 Jy ! Clean residual min=-0.002438 max=0.002604 Jy/beam ! Clean residual mean=-0.000016 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.133808 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 0.133808 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.003 mas, bmaj=19.92 mas, bpa=0.5917 degrees ! Estimated noise=1320.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000719566 Jy ! Component: 100 - total flux cleaned = 0.00081141 Jy ! Component: 150 - total flux cleaned = 0.000862038 Jy ! Component: 200 - total flux cleaned = 0.000927644 Jy ! Total flux subtracted in 200 components = 0.000927644 Jy ! Clean residual min=-0.003033 max=0.002546 Jy/beam ! Clean residual mean=-0.000029 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.134736 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.9887e-05 Jy ! Component: 100 - total flux cleaned = 7.6564e-05 Jy ! Component: 150 - total flux cleaned = 0.000110598 Jy ! Component: 200 - total flux cleaned = 0.000127025 Jy ! Total flux subtracted in 200 components = 0.000127025 Jy ! Clean residual min=-0.003032 max=0.002570 Jy/beam ! Clean residual mean=-0.000028 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.134863 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 103 components and 0.134863 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.064 mas, bpa=-5.325 degrees ! Estimated noise=1061.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000470083 Jy ! Component: 100 - total flux cleaned = -0.000507307 Jy ! Component: 150 - total flux cleaned = -0.000541353 Jy ! Component: 200 - total flux cleaned = -0.000634329 Jy ! Total flux subtracted in 200 components = -0.000634329 Jy ! Clean residual min=-0.002393 max=0.002555 Jy/beam ! Clean residual mean=-0.000015 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.134229 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 122 components and 0.134229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128118Jy sigma=0.000661 ! Fit after self-cal, rms=0.128066Jy sigma=0.000661 wmodel J0411-2758_S_2017_03_27_pus_map.mod ! Writing 122 model components to file: J0411-2758_S_2017_03_27_pus_map.mod wobs J0411-2758_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0411-2758_S_2017_03_27_pus_uvs.fits wwins J0411-2758_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J0411-2758_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761642 Jy ! Component: 100 - total flux cleaned = 0.00110933 Jy ! Component: 150 - total flux cleaned = 0.00115032 Jy ! Component: 200 - total flux cleaned = 0.0011121 Jy ! Component: 250 - total flux cleaned = 0.000960432 Jy ! Component: 300 - total flux cleaned = 0.0008503 Jy ! Component: 350 - total flux cleaned = 0.000777764 Jy ! Component: 400 - total flux cleaned = 0.000635775 Jy ! Component: 450 - total flux cleaned = 0.000428733 Jy ! Component: 500 - total flux cleaned = 0.00019265 Jy ! Component: 550 - total flux cleaned = 5.99693e-05 Jy ! Component: 600 - total flux cleaned = -0.000167573 Jy ! Component: 650 - total flux cleaned = -0.000327203 Jy ! Component: 700 - total flux cleaned = -0.000546285 Jy ! Component: 750 - total flux cleaned = -0.000669744 Jy ! Component: 800 - total flux cleaned = -0.000912257 Jy ! Component: 850 - total flux cleaned = -0.00112064 Jy ! Component: 900 - total flux cleaned = -0.00129609 Jy ! Component: 950 - total flux cleaned = -0.00138316 Jy ! Component: 1000 - total flux cleaned = -0.00152689 Jy ! Component: 1050 - total flux cleaned = -0.00158347 Jy ! Component: 1100 - total flux cleaned = -0.00189063 Jy ! Component: 1150 - total flux cleaned = -0.00194525 Jy ! Component: 1200 - total flux cleaned = -0.00208129 Jy ! Component: 1250 - total flux cleaned = -0.00221571 Jy ! Component: 1300 - total flux cleaned = -0.00229533 Jy ! Component: 1350 - total flux cleaned = -0.00240067 Jy ! Component: 1400 - total flux cleaned = -0.00253098 Jy ! Component: 1450 - total flux cleaned = -0.0026851 Jy ! Component: 1500 - total flux cleaned = -0.00283732 Jy ! Component: 1550 - total flux cleaned = -0.00283694 Jy ! Component: 1600 - total flux cleaned = -0.00291181 Jy ! Component: 1650 - total flux cleaned = -0.00303525 Jy ! Component: 1700 - total flux cleaned = -0.00308389 Jy ! Component: 1750 - total flux cleaned = -0.00303623 Jy ! Component: 1800 - total flux cleaned = -0.0031324 Jy ! Component: 1850 - total flux cleaned = -0.00317989 Jy ! Component: 1900 - total flux cleaned = -0.0032032 Jy ! Component: 1950 - total flux cleaned = -0.00324975 Jy ! Component: 2000 - total flux cleaned = -0.00322662 Jy ! Component: 2050 - total flux cleaned = -0.00327253 Jy ! Component: 2100 - total flux cleaned = -0.00325008 Jy ! Component: 2150 - total flux cleaned = -0.00336228 Jy ! Component: 2200 - total flux cleaned = -0.00331763 Jy ! Component: 2250 - total flux cleaned = -0.00340604 Jy ! Component: 2300 - total flux cleaned = -0.00338388 Jy ! Component: 2350 - total flux cleaned = -0.00342721 Jy ! Component: 2400 - total flux cleaned = -0.00338463 Jy ! Component: 2450 - total flux cleaned = -0.00344882 Jy ! Component: 2500 - total flux cleaned = -0.0034909 Jy ! Component: 2550 - total flux cleaned = -0.00351163 Jy ! Component: 2600 - total flux cleaned = -0.00359481 Jy ! Component: 2650 - total flux cleaned = -0.00357386 Jy ! Component: 2700 - total flux cleaned = -0.00357364 Jy ! Component: 2750 - total flux cleaned = -0.00363471 Jy ! Component: 2800 - total flux cleaned = -0.00361446 Jy ! Component: 2850 - total flux cleaned = -0.00367461 Jy ! Component: 2900 - total flux cleaned = -0.00367471 Jy ! Component: 2950 - total flux cleaned = -0.0036747 Jy ! Component: 3000 - total flux cleaned = -0.00365494 Jy ! Component: 3050 - total flux cleaned = -0.00363555 Jy ! Component: 3100 - total flux cleaned = -0.00365469 Jy ! Component: 3150 - total flux cleaned = -0.0035972 Jy ! Component: 3200 - total flux cleaned = -0.00363512 Jy ! Component: 3250 - total flux cleaned = -0.00359732 Jy ! Component: 3300 - total flux cleaned = -0.00369119 Jy ! Component: 3350 - total flux cleaned = -0.00363543 Jy ! Component: 3400 - total flux cleaned = -0.00361682 Jy ! Component: 3450 - total flux cleaned = -0.00357987 Jy ! Component: 3500 - total flux cleaned = -0.00352522 Jy ! Component: 3550 - total flux cleaned = -0.0034526 Jy ! Component: 3600 - total flux cleaned = -0.00352449 Jy ! Component: 3650 - total flux cleaned = -0.00341714 Jy ! Component: 3700 - total flux cleaned = -0.00336374 Jy ! Component: 3750 - total flux cleaned = -0.00327542 Jy ! Component: 3800 - total flux cleaned = -0.00318774 Jy ! Component: 3850 - total flux cleaned = -0.00322279 Jy ! Component: 3900 - total flux cleaned = -0.00317089 Jy ! Component: 3950 - total flux cleaned = -0.00315345 Jy ! Component: 4000 - total flux cleaned = -0.00306756 Jy ! Component: 4050 - total flux cleaned = -0.0029481 Jy ! Total flux subtracted in 4096 components = -0.00286355 Jy ! Clean residual min=-0.000912 max=0.000941 Jy/beam ! Clean residual mean=-0.000007 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.131365 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 395 components and 0.131365 Jy ![Exited script file: muppet] wmap "J0411-2758_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 8.064 at -5.325 degrees (North through East) ! Clean map min=-0.0019332 max=0.10596 Jy/beam ! Writing clean map to FITS file: J0411-2758_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.105963 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00030599 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.866309 0.866309 1.73262 3.46524 6.93047 13.8609 27.7219 55.4438 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 8.064 at -5.325 degrees (North through East) ! Clean map min=-0.0019332 max=0.10596 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0411-2758_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:31:12 2019