! Started logfile: J0409-1948_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:04:13 2019 obs J0409-1948_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0409-1948_S_2017_01_16_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782274 visibilities/baseline/integration-bin. ! Found source: J0409-1948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 24360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0409-1948_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.947776Jy sigma=0.005928 ! Fit after self-cal, rms=0.916684Jy sigma=0.005779 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=10.58 mas, bpa=17.53 degrees ! Estimated noise=1428.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0723967 Jy ! Component: 100 - total flux cleaned = 0.0881973 Jy ! Total flux subtracted in 100 components = 0.0881973 Jy ! Clean residual min=-0.003467 max=0.004459 Jy/beam ! Clean residual mean=-0.000000 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.0881973 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0881973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140535Jy sigma=0.000661 ! Fit after self-cal, rms=0.140450Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.984 mas, bmaj=12.29 mas, bpa=17.37 degrees ! Estimated noise=756.553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043304 Jy ! Component: 100 - total flux cleaned = 0.00619232 Jy ! Component: 150 - total flux cleaned = 0.00653406 Jy ! Component: 200 - total flux cleaned = 0.00666412 Jy ! Total flux subtracted in 200 components = 0.00666412 Jy ! Clean residual min=-0.002559 max=0.002726 Jy/beam ! Clean residual mean=-0.000003 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0948614 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0948614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140255Jy sigma=0.000660 ! Fit after self-cal, rms=0.140249Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.89 HN 1.02 KP 1.00 ! LA 1.03 MK 1.00* NL 0.87 OV 0.96 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.03 KP 0.98 ! LA 0.97 MK 1.00* NL 1.04 OV 1.00 ! PT 1.13 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 1.02 KP 0.99 ! LA 1.02 MK 1.00* NL 1.03 OV 0.90 ! PT 1.16 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 0.98 KP 0.85 ! LA 0.93 MK 1.00* NL 1.19 OV 0.95 ! PT 1.02 SC 0.86 ! ! ! Fit before self-cal, rms=0.140249Jy sigma=0.000660 ! Fit after self-cal, rms=0.132889Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=12.27 mas, bpa=17.45 degrees ! Estimated noise=755.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634489 Jy ! Component: 100 - total flux cleaned = 0.000545484 Jy ! Component: 150 - total flux cleaned = 0.000444112 Jy ! Component: 200 - total flux cleaned = 0.000357404 Jy ! Total flux subtracted in 200 components = 0.000357404 Jy ! Clean residual min=-0.002685 max=0.002519 Jy/beam ! Clean residual mean=-0.000005 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0952188 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0952188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132870Jy sigma=0.000658 ! Fit after self-cal, rms=0.132824Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132824Jy sigma=0.000658 ! Fit after self-cal, rms=0.131600Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.955 mas, bmaj=12.2 mas, bpa=17.49 degrees ! Estimated noise=757.441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367781 Jy ! Component: 100 - total flux cleaned = 0.00041201 Jy ! Component: 150 - total flux cleaned = 0.000437725 Jy ! Component: 200 - total flux cleaned = 0.000448827 Jy ! Total flux subtracted in 200 components = 0.000448827 Jy ! Clean residual min=-0.001953 max=0.001827 Jy/beam ! Clean residual mean=-0.000004 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0956676 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0956676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131595Jy sigma=0.000656 ! Fit after self-cal, rms=0.131683Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.11815e-05 Jy ! Component: 100 - total flux cleaned = -8.10724e-05 Jy ! Component: 150 - total flux cleaned = -8.09369e-05 Jy ! Component: 200 - total flux cleaned = -7.20036e-05 Jy ! Total flux subtracted in 200 components = -7.20036e-05 Jy ! Clean residual min=-0.001966 max=0.001848 Jy/beam ! Clean residual mean=-0.000004 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0955956 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.0955956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131680Jy sigma=0.000656 ! Fit after self-cal, rms=0.131684Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131684Jy sigma=0.000656 ! Fit after self-cal, rms=0.131625Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.956 mas, bmaj=12.2 mas, bpa=17.46 degrees ! Estimated noise=759.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480059 Jy ! Component: 100 - total flux cleaned = 0.000597968 Jy ! Component: 150 - total flux cleaned = 0.000614616 Jy ! Component: 200 - total flux cleaned = 0.000636458 Jy ! Total flux subtracted in 200 components = 0.000636458 Jy ! Clean residual min=-0.001860 max=0.001880 Jy/beam ! Clean residual mean=0.000000 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0962321 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.0962321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131620Jy sigma=0.000655 ! Fit after self-cal, rms=0.131621Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.66869e-05 Jy ! Component: 100 - total flux cleaned = 5.56546e-05 Jy ! Component: 150 - total flux cleaned = 6.37537e-05 Jy ! Component: 200 - total flux cleaned = 6.35878e-05 Jy ! Total flux subtracted in 200 components = 6.35878e-05 Jy ! Clean residual min=-0.001853 max=0.001898 Jy/beam ! Clean residual mean=-0.000000 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0962957 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.0962957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131619Jy sigma=0.000655 ! Fit after self-cal, rms=0.131622Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131622Jy sigma=0.000655 ! Fit after self-cal, rms=0.131968Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.852 mas, bmaj=17.53 mas, bpa=9.529 degrees ! Estimated noise=890.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563479 Jy ! Component: 100 - total flux cleaned = 0.000762322 Jy ! Component: 150 - total flux cleaned = 0.000813425 Jy ! Component: 200 - total flux cleaned = 0.000823026 Jy ! Total flux subtracted in 200 components = 0.000823026 Jy ! Clean residual min=-0.001952 max=0.001829 Jy/beam ! Clean residual mean=0.000000 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0971187 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.0971187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131965Jy sigma=0.000655 ! Fit after self-cal, rms=0.131970Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.83883e-05 Jy ! Component: 100 - total flux cleaned = 4.32891e-05 Jy ! Component: 150 - total flux cleaned = 5.25428e-05 Jy ! Component: 200 - total flux cleaned = 5.52624e-05 Jy ! Total flux subtracted in 200 components = 5.52624e-05 Jy ! Clean residual min=-0.001947 max=0.001843 Jy/beam ! Clean residual mean=0.000000 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.097174 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.097174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131969Jy sigma=0.000655 ! Fit after self-cal, rms=0.131970Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=12.19 mas, bpa=17.43 degrees ! Estimated noise=761.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.954 x 12.19 at 17.43 degrees (North through East) ! Clean map min=-0.0018396 max=0.092466 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=10.48 mas, bpa=17.59 degrees ! Estimated noise=1418.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716363 Jy ! Component: 100 - total flux cleaned = 0.0875483 Jy ! Component: 150 - total flux cleaned = 0.0928485 Jy ! Component: 200 - total flux cleaned = 0.0953771 Jy ! Total flux subtracted in 200 components = 0.0953771 Jy ! Clean residual min=-0.002930 max=0.003278 Jy/beam ! Clean residual mean=0.000001 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0953771 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0953771 Jy ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=12.19 mas, bpa=17.43 degrees ! Estimated noise=761.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144828 Jy ! Component: 100 - total flux cleaned = 0.00160505 Jy ! Component: 150 - total flux cleaned = 0.0016637 Jy ! Component: 200 - total flux cleaned = 0.00166386 Jy ! Total flux subtracted in 200 components = 0.00166386 Jy ! Clean residual min=-0.001910 max=0.001940 Jy/beam ! Clean residual mean=0.000000 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.097041 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.097041 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.852 mas, bmaj=17.53 mas, bpa=9.529 degrees ! Estimated noise=890.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014221 Jy ! Component: 100 - total flux cleaned = 0.000142085 Jy ! Component: 150 - total flux cleaned = 0.000133293 Jy ! Component: 200 - total flux cleaned = 0.000125145 Jy ! Total flux subtracted in 200 components = 0.000125145 Jy ! Clean residual min=-0.001986 max=0.001839 Jy/beam ! Clean residual mean=-0.000000 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0971662 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.23404e-06 Jy ! Component: 100 - total flux cleaned = -6.81887e-06 Jy ! Component: 150 - total flux cleaned = -6.91099e-06 Jy ! Component: 200 - total flux cleaned = -1.24326e-05 Jy ! Total flux subtracted in 200 components = -1.24326e-05 Jy ! Clean residual min=-0.001974 max=0.001844 Jy/beam ! Clean residual mean=0.000000 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0971537 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.0971537 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=12.19 mas, bpa=17.43 degrees ! Estimated noise=761.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170128 Jy ! Component: 100 - total flux cleaned = -0.000234322 Jy ! Component: 150 - total flux cleaned = -0.00023464 Jy ! Component: 200 - total flux cleaned = -0.000247735 Jy ! Total flux subtracted in 200 components = -0.000247735 Jy ! Clean residual min=-0.001879 max=0.001912 Jy/beam ! Clean residual mean=0.000000 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.096906 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.096906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131977Jy sigma=0.000655 ! Fit after self-cal, rms=0.131980Jy sigma=0.000655 wmodel J0409-1948_S_2017_01_16_pus_map.mod ! Writing 53 model components to file: J0409-1948_S_2017_01_16_pus_map.mod wobs J0409-1948_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0409-1948_S_2017_01_16_pus_uvs.fits wwins J0409-1948_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0409-1948_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028017 Jy ! Component: 100 - total flux cleaned = 0.000596958 Jy ! Component: 150 - total flux cleaned = 0.000926995 Jy ! Component: 200 - total flux cleaned = 0.00110016 Jy ! Component: 250 - total flux cleaned = 0.00121223 Jy ! Component: 300 - total flux cleaned = 0.00132146 Jy ! Component: 350 - total flux cleaned = 0.0014545 Jy ! Component: 400 - total flux cleaned = 0.0015583 Jy ! Component: 450 - total flux cleaned = 0.00165954 Jy ! Component: 500 - total flux cleaned = 0.00173419 Jy ! Component: 550 - total flux cleaned = 0.00175875 Jy ! Component: 600 - total flux cleaned = 0.00175893 Jy ! Component: 650 - total flux cleaned = 0.00173558 Jy ! Component: 700 - total flux cleaned = 0.00175884 Jy ! Component: 750 - total flux cleaned = 0.00164561 Jy ! Component: 800 - total flux cleaned = 0.00164533 Jy ! Component: 850 - total flux cleaned = 0.00155721 Jy ! Component: 900 - total flux cleaned = 0.00149241 Jy ! Component: 950 - total flux cleaned = 0.00149233 Jy ! Component: 1000 - total flux cleaned = 0.00149263 Jy ! Component: 1050 - total flux cleaned = 0.00151326 Jy ! Component: 1100 - total flux cleaned = 0.00155445 Jy ! Component: 1150 - total flux cleaned = 0.00155438 Jy ! Component: 1200 - total flux cleaned = 0.00149456 Jy ! Component: 1250 - total flux cleaned = 0.00151439 Jy ! Component: 1300 - total flux cleaned = 0.00149475 Jy ! Component: 1350 - total flux cleaned = 0.00145605 Jy ! Component: 1400 - total flux cleaned = 0.00143642 Jy ! Component: 1450 - total flux cleaned = 0.00136032 Jy ! Component: 1500 - total flux cleaned = 0.00132271 Jy ! Component: 1550 - total flux cleaned = 0.00128558 Jy ! Component: 1600 - total flux cleaned = 0.00126763 Jy ! Component: 1650 - total flux cleaned = 0.00135855 Jy ! Component: 1700 - total flux cleaned = 0.00132227 Jy ! Component: 1750 - total flux cleaned = 0.00132238 Jy ! Component: 1800 - total flux cleaned = 0.00141103 Jy ! Component: 1850 - total flux cleaned = 0.00135864 Jy ! Component: 1900 - total flux cleaned = 0.00144574 Jy ! Component: 1950 - total flux cleaned = 0.00146295 Jy ! Component: 2000 - total flux cleaned = 0.00154839 Jy ! Component: 2050 - total flux cleaned = 0.00153163 Jy ! Component: 2100 - total flux cleaned = 0.00158244 Jy ! Component: 2150 - total flux cleaned = 0.00154892 Jy ! Component: 2200 - total flux cleaned = 0.00159864 Jy ! Component: 2250 - total flux cleaned = 0.00159865 Jy ! Component: 2300 - total flux cleaned = 0.00169646 Jy ! Component: 2350 - total flux cleaned = 0.0016478 Jy ! Component: 2400 - total flux cleaned = 0.00164792 Jy ! Component: 2450 - total flux cleaned = 0.00166411 Jy ! Component: 2500 - total flux cleaned = 0.00166417 Jy ! Component: 2550 - total flux cleaned = 0.00169575 Jy ! Component: 2600 - total flux cleaned = 0.0018048 Jy ! Component: 2650 - total flux cleaned = 0.00182013 Jy ! Component: 2700 - total flux cleaned = 0.00175843 Jy ! Component: 2750 - total flux cleaned = 0.00178897 Jy ! Component: 2800 - total flux cleaned = 0.00180397 Jy ! Component: 2850 - total flux cleaned = 0.00183414 Jy ! Component: 2900 - total flux cleaned = 0.00181915 Jy ! Component: 2950 - total flux cleaned = 0.0018639 Jy ! Component: 3000 - total flux cleaned = 0.00192305 Jy ! Component: 3050 - total flux cleaned = 0.0019525 Jy ! Component: 3100 - total flux cleaned = 0.00195258 Jy ! Component: 3150 - total flux cleaned = 0.00201056 Jy ! Component: 3200 - total flux cleaned = 0.00206827 Jy ! Component: 3250 - total flux cleaned = 0.00205377 Jy ! Component: 3300 - total flux cleaned = 0.00211067 Jy ! Component: 3350 - total flux cleaned = 0.00218134 Jy ! Component: 3400 - total flux cleaned = 0.00215321 Jy ! Component: 3450 - total flux cleaned = 0.00223725 Jy ! Component: 3500 - total flux cleaned = 0.00225112 Jy ! Component: 3550 - total flux cleaned = 0.00226498 Jy ! Component: 3600 - total flux cleaned = 0.00225136 Jy ! Component: 3650 - total flux cleaned = 0.00233358 Jy ! Component: 3700 - total flux cleaned = 0.00233347 Jy ! Component: 3750 - total flux cleaned = 0.00238756 Jy ! Component: 3800 - total flux cleaned = 0.00244136 Jy ! Component: 3850 - total flux cleaned = 0.00242797 Jy ! Component: 3900 - total flux cleaned = 0.00252096 Jy ! Component: 3950 - total flux cleaned = 0.00244165 Jy ! Component: 4000 - total flux cleaned = 0.00248115 Jy ! Component: 4050 - total flux cleaned = 0.00254666 Jy ! Total flux subtracted in 4096 components = 0.00257263 Jy ! Clean residual min=-0.000735 max=0.000733 Jy/beam ! Clean residual mean=0.000002 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0994786 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 342 components and 0.0994786 Jy ![Exited script file: muppet] wmap "J0409-1948_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.954 x 12.19 at 17.43 degrees (North through East) ! Clean map min=-0.0013806 max=0.092254 Jy/beam ! Writing clean map to FITS file: J0409-1948_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0922536 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000262176 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.852571 0.852571 1.70514 3.41028 6.82057 13.6411 27.2823 54.5646 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.954 x 12.19 at 17.43 degrees (North through East) ! Clean map min=-0.0013806 max=0.092254 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0409-1948_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:04:19 2019