! Started logfile: J0406-3826_S_2017_08_12_pus_uvs.log on Fri May 10 14:51:51 2019 obs J0406-3826_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0406-3826_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.312821 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0406-3826 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-3826_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.362940Jy sigma=0.002362 ! Fit after self-cal, rms=0.324175Jy sigma=0.002111 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.2 mas, bmaj=6.34 mas, bpa=-3.264 degrees ! Estimated noise=5044.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.568255 Jy ! Component: 100 - total flux cleaned = 0.755509 Jy ! Total flux subtracted in 100 components = 0.755509 Jy ! Clean residual min=-0.051076 max=0.086459 Jy/beam ! Clean residual mean=-0.002066 rms=0.021985 Jy/beam ! Combined flux in latest and established models = 0.755509 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.755509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201473Jy sigma=0.001322 ! Fit after self-cal, rms=0.200893Jy sigma=0.001319 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=7.073 mas, bpa=-2.958 degrees ! Estimated noise=4602.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126879 Jy ! Component: 100 - total flux cleaned = 0.18933 Jy ! Component: 150 - total flux cleaned = 0.220832 Jy ! Component: 200 - total flux cleaned = 0.237984 Jy ! Total flux subtracted in 200 components = 0.237984 Jy ! Clean residual min=-0.018428 max=0.019910 Jy/beam ! Clean residual mean=-0.000462 rms=0.005712 Jy/beam ! Combined flux in latest and established models = 0.993493 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.993493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105892Jy sigma=0.000686 ! Fit after self-cal, rms=0.105700Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.05 ! LA 0.98 MK 1.00 NL 1.00* OV 1.00 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 0.95 MK 0.99 NL 1.00* OV 1.02 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.94 MK 1.02 NL 1.00* OV 0.98 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.105700Jy sigma=0.000685 ! Fit after self-cal, rms=0.097983Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=7.103 mas, bpa=-3.411 degrees ! Estimated noise=4606.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025601 Jy ! Component: 100 - total flux cleaned = 6.66556e-05 Jy ! Component: 150 - total flux cleaned = 2.4863e-05 Jy ! Component: 200 - total flux cleaned = 2.45374e-05 Jy ! Total flux subtracted in 200 components = 2.45374e-05 Jy ! Clean residual min=-0.014361 max=0.014462 Jy/beam ! Clean residual mean=-0.000007 rms=0.003732 Jy/beam ! Combined flux in latest and established models = 0.993518 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.993518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097931Jy sigma=0.000640 ! Fit after self-cal, rms=0.097953Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097953Jy sigma=0.000640 ! Fit after self-cal, rms=0.097859Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=7.101 mas, bpa=-3.431 degrees ! Estimated noise=4601.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.74495e-05 Jy ! Component: 100 - total flux cleaned = -1.8442e-05 Jy ! Component: 150 - total flux cleaned = -1.76676e-05 Jy ! Component: 200 - total flux cleaned = -5.03434e-05 Jy ! Total flux subtracted in 200 components = -5.03434e-05 Jy ! Clean residual min=-0.014452 max=0.014360 Jy/beam ! Clean residual mean=-0.000003 rms=0.003712 Jy/beam ! Combined flux in latest and established models = 0.993467 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.993467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097827Jy sigma=0.000640 ! Fit after self-cal, rms=0.097832Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.03903e-05 Jy ! Component: 100 - total flux cleaned = -7.88128e-05 Jy ! Component: 150 - total flux cleaned = -8.15188e-05 Jy ! Component: 200 - total flux cleaned = -8.39453e-05 Jy ! Total flux subtracted in 200 components = -8.39453e-05 Jy ! Clean residual min=-0.014589 max=0.014267 Jy/beam ! Clean residual mean=-0.000004 rms=0.003704 Jy/beam ! Combined flux in latest and established models = 0.993383 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.993383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097808Jy sigma=0.000640 ! Fit after self-cal, rms=0.097814Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097814Jy sigma=0.000640 ! Fit after self-cal, rms=0.097743Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=7.1 mas, bpa=-3.453 degrees ! Estimated noise=4598.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.24474e-05 Jy ! Component: 100 - total flux cleaned = -5.52721e-05 Jy ! Component: 150 - total flux cleaned = -8.6755e-05 Jy ! Component: 200 - total flux cleaned = -8.82206e-05 Jy ! Total flux subtracted in 200 components = -8.82206e-05 Jy ! Clean residual min=-0.014623 max=0.014197 Jy/beam ! Clean residual mean=-0.000000 rms=0.003691 Jy/beam ! Combined flux in latest and established models = 0.993295 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.993295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097719Jy sigma=0.000640 ! Fit after self-cal, rms=0.097724Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115253 Jy ! Component: 100 - total flux cleaned = -8.58317e-05 Jy ! Component: 150 - total flux cleaned = -8.78253e-05 Jy ! Component: 200 - total flux cleaned = -8.87679e-05 Jy ! Total flux subtracted in 200 components = -8.87679e-05 Jy ! Clean residual min=-0.014706 max=0.014120 Jy/beam ! Clean residual mean=-0.000001 rms=0.003683 Jy/beam ! Combined flux in latest and established models = 0.993206 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.993206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097705Jy sigma=0.000640 ! Fit after self-cal, rms=0.097711Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097711Jy sigma=0.000640 ! Fit after self-cal, rms=0.097655Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.492 mas, bmaj=26.34 mas, bpa=-6.562 degrees ! Estimated noise=6865.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071451 Jy ! Component: 100 - total flux cleaned = 0.000706885 Jy ! Component: 150 - total flux cleaned = 0.000703472 Jy ! Component: 200 - total flux cleaned = 0.000701361 Jy ! Total flux subtracted in 200 components = 0.000701361 Jy ! Clean residual min=-0.017627 max=0.016801 Jy/beam ! Clean residual mean=0.000023 rms=0.006305 Jy/beam ! Combined flux in latest and established models = 0.993908 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 56 components and 0.993908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097708Jy sigma=0.000640 ! Fit after self-cal, rms=0.097715Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142716 Jy ! Component: 100 - total flux cleaned = -0.000145003 Jy ! Component: 150 - total flux cleaned = -0.000146838 Jy ! Component: 200 - total flux cleaned = -0.000146357 Jy ! Total flux subtracted in 200 components = -0.000146357 Jy ! Clean residual min=-0.017597 max=0.016760 Jy/beam ! Clean residual mean=0.000022 rms=0.006294 Jy/beam ! Combined flux in latest and established models = 0.993761 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 0.993761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097827Jy sigma=0.000641 ! Fit after self-cal, rms=0.097834Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=7.099 mas, bpa=-3.475 degrees ! Estimated noise=4595.83 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.502 x 7.099 at -3.475 degrees (North through East) ! Clean map min=-0.014129 max=0.77089 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097834Jy sigma=0.000641 ! Fit after self-cal, rms=0.086408Jy sigma=0.000559 ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=7.096 mas, bpa=-3.288 degrees ! Estimated noise=4591.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000658786 Jy ! Component: 100 - total flux cleaned = -0.000529152 Jy ! Component: 150 - total flux cleaned = -0.000425631 Jy ! Component: 200 - total flux cleaned = -0.000424736 Jy ! Total flux subtracted in 200 components = -0.000424736 Jy ! Clean residual min=-0.014998 max=0.013987 Jy/beam ! Clean residual mean=0.000007 rms=0.003672 Jy/beam ! Combined flux in latest and established models = 0.993337 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.993337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086355Jy sigma=0.000558 ! Fit after self-cal, rms=0.086362Jy sigma=0.000558 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.06766e-05 Jy ! Component: 100 - total flux cleaned = 2.77421e-06 Jy ! Component: 150 - total flux cleaned = -4.63236e-05 Jy ! Component: 200 - total flux cleaned = -4.62797e-05 Jy ! Total flux subtracted in 200 components = -4.62797e-05 Jy ! Clean residual min=-0.015036 max=0.013904 Jy/beam ! Clean residual mean=0.000007 rms=0.003666 Jy/beam ! Combined flux in latest and established models = 0.99329 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.99329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086339Jy sigma=0.000558 ! Fit after self-cal, rms=0.086348Jy sigma=0.000558 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086348Jy sigma=0.000558 ! Fit after self-cal, rms=0.086297Jy sigma=0.000558 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.206 mas, bmaj=6.342 mas, bpa=-3.234 degrees ! Estimated noise=5035.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.562887 Jy ! Component: 100 - total flux cleaned = 0.747264 Jy ! Component: 150 - total flux cleaned = 0.843847 Jy ! Component: 200 - total flux cleaned = 0.901269 Jy ! Total flux subtracted in 200 components = 0.901269 Jy ! Clean residual min=-0.022150 max=0.029776 Jy/beam ! Clean residual mean=-0.000708 rms=0.008423 Jy/beam ! Combined flux in latest and established models = 0.901269 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.901269 Jy ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=7.096 mas, bpa=-3.318 degrees ! Estimated noise=4588.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445495 Jy ! Component: 100 - total flux cleaned = 0.0670426 Jy ! Component: 150 - total flux cleaned = 0.0790165 Jy ! Component: 200 - total flux cleaned = 0.0855106 Jy ! Total flux subtracted in 200 components = 0.0855106 Jy ! Clean residual min=-0.015279 max=0.013231 Jy/beam ! Clean residual mean=-0.000038 rms=0.003755 Jy/beam ! Combined flux in latest and established models = 0.98678 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.98678 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.488 mas, bmaj=26.3 mas, bpa=-6.414 degrees ! Estimated noise=6867.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661613 Jy ! Component: 100 - total flux cleaned = 0.00785868 Jy ! Component: 150 - total flux cleaned = 0.00786419 Jy ! Component: 200 - total flux cleaned = 0.00786907 Jy ! Total flux subtracted in 200 components = 0.00786907 Jy ! Clean residual min=-0.017856 max=0.016257 Jy/beam ! Clean residual mean=0.000055 rms=0.006311 Jy/beam ! Combined flux in latest and established models = 0.994649 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.49588e-06 Jy ! Component: 100 - total flux cleaned = 8.65427e-06 Jy ! Component: 150 - total flux cleaned = 1.23063e-05 Jy ! Component: 200 - total flux cleaned = 1.54531e-05 Jy ! Total flux subtracted in 200 components = 1.54531e-05 Jy ! Clean residual min=-0.017948 max=0.016192 Jy/beam ! Clean residual mean=0.000056 rms=0.006295 Jy/beam ! Combined flux in latest and established models = 0.994664 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.994664 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=7.096 mas, bpa=-3.318 degrees ! Estimated noise=4588.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182651 Jy ! Component: 100 - total flux cleaned = -0.00141178 Jy ! Component: 150 - total flux cleaned = -0.0012039 Jy ! Component: 200 - total flux cleaned = -0.0010517 Jy ! Total flux subtracted in 200 components = -0.0010517 Jy ! Clean residual min=-0.014784 max=0.013708 Jy/beam ! Clean residual mean=0.000013 rms=0.003664 Jy/beam ! Combined flux in latest and established models = 0.993612 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.993613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086304Jy sigma=0.000558 ! Fit after self-cal, rms=0.086321Jy sigma=0.000558 wmodel J0406-3826_S_2017_08_12_pus_map.mod ! Writing 45 model components to file: J0406-3826_S_2017_08_12_pus_map.mod wobs J0406-3826_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0406-3826_S_2017_08_12_pus_uvs.fits wwins J0406-3826_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0406-3826_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203522 Jy ! Component: 100 - total flux cleaned = 0.00141955 Jy ! Component: 150 - total flux cleaned = 0.00176271 Jy ! Component: 200 - total flux cleaned = 0.00148255 Jy ! Component: 250 - total flux cleaned = 0.000828082 Jy ! Component: 300 - total flux cleaned = 0.000362216 Jy ! Component: 350 - total flux cleaned = -0.000689914 Jy ! Component: 400 - total flux cleaned = -0.0016443 Jy ! Component: 450 - total flux cleaned = -0.0024342 Jy ! Component: 500 - total flux cleaned = -0.00309179 Jy ! Component: 550 - total flux cleaned = -0.00377558 Jy ! Component: 600 - total flux cleaned = -0.00433856 Jy ! Component: 650 - total flux cleaned = -0.00493275 Jy ! Component: 700 - total flux cleaned = -0.0053054 Jy ! Component: 750 - total flux cleaned = -0.0049533 Jy ! Component: 800 - total flux cleaned = -0.00449217 Jy ! Component: 850 - total flux cleaned = -0.00404036 Jy ! Component: 900 - total flux cleaned = -0.00365292 Jy ! Component: 950 - total flux cleaned = -0.00327185 Jy ! Component: 1000 - total flux cleaned = -0.00294788 Jy ! Component: 1050 - total flux cleaned = -0.0026748 Jy ! Component: 1100 - total flux cleaned = -0.00239523 Jy ! Component: 1150 - total flux cleaned = -0.00210727 Jy ! Component: 1200 - total flux cleaned = -0.00187037 Jy ! Component: 1250 - total flux cleaned = -0.00162471 Jy ! Component: 1300 - total flux cleaned = -0.00143414 Jy ! Component: 1350 - total flux cleaned = -0.00123765 Jy ! Component: 1400 - total flux cleaned = -0.000964726 Jy ! Component: 1450 - total flux cleaned = -0.000749721 Jy ! Component: 1500 - total flux cleaned = -0.000529228 Jy ! Component: 1550 - total flux cleaned = -0.000300579 Jy ! Component: 1600 - total flux cleaned = -6.17381e-05 Jy ! Component: 1650 - total flux cleaned = 0.000187721 Jy ! Component: 1700 - total flux cleaned = 0.000360887 Jy ! Component: 1750 - total flux cleaned = 0.000630213 Jy ! Component: 1800 - total flux cleaned = 0.000910609 Jy ! Component: 1850 - total flux cleaned = 0.00130358 Jy ! Component: 1900 - total flux cleaned = 0.00161443 Jy ! Component: 1950 - total flux cleaned = 0.00194082 Jy ! Component: 2000 - total flux cleaned = 0.00228008 Jy ! Component: 2050 - total flux cleaned = 0.00263392 Jy ! Component: 2100 - total flux cleaned = 0.00300458 Jy ! Component: 2150 - total flux cleaned = 0.00339154 Jy ! Component: 2200 - total flux cleaned = 0.00379494 Jy ! Component: 2250 - total flux cleaned = 0.00421737 Jy ! Component: 2300 - total flux cleaned = 0.00480909 Jy ! Component: 2350 - total flux cleaned = 0.00527462 Jy ! Component: 2400 - total flux cleaned = 0.00592518 Jy ! Component: 2450 - total flux cleaned = 0.00643637 Jy ! Component: 2500 - total flux cleaned = 0.00715269 Jy ! Component: 2550 - total flux cleaned = 0.00771522 Jy ! Component: 2600 - total flux cleaned = 0.00850039 Jy ! Component: 2650 - total flux cleaned = 0.00891697 Jy ! Component: 2700 - total flux cleaned = 0.0091359 Jy ! Component: 2750 - total flux cleaned = 0.00959397 Jy ! Component: 2800 - total flux cleaned = 0.00982733 Jy ! Component: 2850 - total flux cleaned = 0.0103206 Jy ! Component: 2900 - total flux cleaned = 0.010845 Jy ! Component: 2950 - total flux cleaned = 0.0111115 Jy ! Component: 3000 - total flux cleaned = 0.0113968 Jy ! Component: 3050 - total flux cleaned = 0.0119912 Jy ! Component: 3100 - total flux cleaned = 0.0126141 Jy ! Component: 3150 - total flux cleaned = 0.0129447 Jy ! Component: 3200 - total flux cleaned = 0.0132882 Jy ! Component: 3250 - total flux cleaned = 0.0136431 Jy ! Component: 3300 - total flux cleaned = 0.0140255 Jy ! Component: 3350 - total flux cleaned = 0.0144307 Jy ! Component: 3400 - total flux cleaned = 0.0148443 Jy ! Component: 3450 - total flux cleaned = 0.015288 Jy ! Component: 3500 - total flux cleaned = 0.0157596 Jy ! Component: 3550 - total flux cleaned = 0.0162448 Jy ! Component: 3600 - total flux cleaned = 0.0167553 Jy ! Component: 3650 - total flux cleaned = 0.0172888 Jy ! Component: 3700 - total flux cleaned = 0.0178502 Jy ! Component: 3750 - total flux cleaned = 0.0184234 Jy ! Component: 3800 - total flux cleaned = 0.0190379 Jy ! Component: 3850 - total flux cleaned = 0.0196782 Jy ! Component: 3900 - total flux cleaned = 0.0203604 Jy ! Component: 3950 - total flux cleaned = 0.0210858 Jy ! Component: 4000 - total flux cleaned = 0.0210874 Jy ! Component: 4050 - total flux cleaned = 0.0218704 Jy ! Total flux subtracted in 4096 components = 0.0227026 Jy ! Clean residual min=-0.042781 max=0.045559 Jy/beam ! Clean residual mean=-0.000065 rms=0.011922 Jy/beam ! Combined flux in latest and established models = 1.01632 Jy keep ! Adding 103 model components to the UV plane model. ! The established model now contains 148 components and 1.01632 Jy ![Exited script file: muppet] wmap "J0406-3826_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.5 x 7.096 at -3.318 degrees (North through East) ! Clean map min=-0.074603 max=0.76878 Jy/beam ! Writing clean map to FITS file: J0406-3826_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.768775 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0120192 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.69025 4.69025 9.3805 18.761 37.522 75.044 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.036 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.768 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.5 x 7.096 at -3.318 degrees (North through East) ! Clean map min=-0.074603 max=0.76878 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-3826_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:51:56 2019