! Started logfile: J0406-3826_S_2017_07_16_pus_uvs.log on Thu May 9 11:00:43 2019 obs J0406-3826_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0406-3826_S_2017_07_16_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.312821 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0406-3826 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-3826_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.391352Jy sigma=0.002504 ! Fit after self-cal, rms=0.358221Jy sigma=0.002283 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=6.387 mas, bpa=10.4 degrees ! Estimated noise=5883.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.51931 Jy ! Component: 100 - total flux cleaned = 0.686673 Jy ! Total flux subtracted in 100 components = 0.686673 Jy ! Clean residual min=-0.041875 max=0.076065 Jy/beam ! Clean residual mean=-0.000870 rms=0.017337 Jy/beam ! Combined flux in latest and established models = 0.686673 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.686673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185898Jy sigma=0.001161 ! Fit after self-cal, rms=0.185577Jy sigma=0.001159 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.52 mas, bmaj=7.119 mas, bpa=8.546 degrees ! Estimated noise=5153.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111531 Jy ! Component: 100 - total flux cleaned = 0.166646 Jy ! Component: 150 - total flux cleaned = 0.195792 Jy ! Component: 200 - total flux cleaned = 0.211952 Jy ! Total flux subtracted in 200 components = 0.211952 Jy ! Clean residual min=-0.019126 max=0.012724 Jy/beam ! Clean residual mean=-0.000210 rms=0.005048 Jy/beam ! Combined flux in latest and established models = 0.898625 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 54 components and 0.898625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110238Jy sigma=0.000659 ! Fit after self-cal, rms=0.110153Jy sigma=0.000658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.04 ! LA 1.02 MK 1.00 NL 1.00* OV 1.00 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 0.97 MK 1.01 NL 1.00* OV 1.00 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.98 ! LA 1.00* MK 1.03 NL 1.00* OV 0.90 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.110153Jy sigma=0.000658 ! Fit after self-cal, rms=0.103139Jy sigma=0.000615 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=7.15 mas, bpa=8.281 degrees ! Estimated noise=5140.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633525 Jy ! Component: 100 - total flux cleaned = 0.000534664 Jy ! Component: 150 - total flux cleaned = 0.00044789 Jy ! Component: 200 - total flux cleaned = 0.000372423 Jy ! Total flux subtracted in 200 components = 0.000372423 Jy ! Clean residual min=-0.009574 max=0.010701 Jy/beam ! Clean residual mean=-0.000081 rms=0.002993 Jy/beam ! Combined flux in latest and established models = 0.898997 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.898997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103097Jy sigma=0.000615 ! Fit after self-cal, rms=0.103145Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103145Jy sigma=0.000615 ! Fit after self-cal, rms=0.103061Jy sigma=0.000615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=7.149 mas, bpa=8.284 degrees ! Estimated noise=5137.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028829 Jy ! Component: 100 - total flux cleaned = 0.000200339 Jy ! Component: 150 - total flux cleaned = 0.000146993 Jy ! Component: 200 - total flux cleaned = 0.000100708 Jy ! Total flux subtracted in 200 components = 0.000100708 Jy ! Clean residual min=-0.009648 max=0.010643 Jy/beam ! Clean residual mean=-0.000080 rms=0.002991 Jy/beam ! Combined flux in latest and established models = 0.899098 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.899098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103046Jy sigma=0.000614 ! Fit after self-cal, rms=0.103045Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76816e-06 Jy ! Component: 100 - total flux cleaned = -2.59478e-05 Jy ! Component: 150 - total flux cleaned = -4.78134e-05 Jy ! Component: 200 - total flux cleaned = -4.86781e-05 Jy ! Total flux subtracted in 200 components = -4.86781e-05 Jy ! Clean residual min=-0.009645 max=0.010592 Jy/beam ! Clean residual mean=-0.000080 rms=0.002987 Jy/beam ! Combined flux in latest and established models = 0.899049 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 0.899049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103037Jy sigma=0.000614 ! Fit after self-cal, rms=0.103038Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103038Jy sigma=0.000614 ! Fit after self-cal, rms=0.102986Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.534 mas, bmaj=7.148 mas, bpa=8.285 degrees ! Estimated noise=5135.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.67906e-05 Jy ! Component: 100 - total flux cleaned = 8.44035e-06 Jy ! Component: 150 - total flux cleaned = -9.73764e-06 Jy ! Component: 200 - total flux cleaned = -4.3645e-05 Jy ! Total flux subtracted in 200 components = -4.3645e-05 Jy ! Clean residual min=-0.009616 max=0.010577 Jy/beam ! Clean residual mean=-0.000080 rms=0.002982 Jy/beam ! Combined flux in latest and established models = 0.899006 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 66 components and 0.899006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102981Jy sigma=0.000614 ! Fit after self-cal, rms=0.102981Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.88799e-07 Jy ! Component: 100 - total flux cleaned = -3.22895e-05 Jy ! Component: 150 - total flux cleaned = -3.25557e-05 Jy ! Component: 200 - total flux cleaned = -4.76893e-05 Jy ! Total flux subtracted in 200 components = -4.76893e-05 Jy ! Clean residual min=-0.009616 max=0.010526 Jy/beam ! Clean residual mean=-0.000081 rms=0.002980 Jy/beam ! Combined flux in latest and established models = 0.898958 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 66 components and 0.898958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102977Jy sigma=0.000614 ! Fit after self-cal, rms=0.102977Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102977Jy sigma=0.000614 ! Fit after self-cal, rms=0.102946Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.904 mas, bmaj=25.03 mas, bpa=3.249 degrees ! Estimated noise=7511.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319658 Jy ! Component: 100 - total flux cleaned = -0.000317377 Jy ! Component: 150 - total flux cleaned = -0.000315966 Jy ! Component: 200 - total flux cleaned = -0.0003149 Jy ! Total flux subtracted in 200 components = -0.0003149 Jy ! Clean residual min=-0.010574 max=0.013091 Jy/beam ! Clean residual mean=-0.000209 rms=0.004924 Jy/beam ! Combined flux in latest and established models = 0.898643 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 69 components and 0.898643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102951Jy sigma=0.000614 ! Fit after self-cal, rms=0.102950Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.36827e-05 Jy ! Component: 100 - total flux cleaned = -4.27066e-05 Jy ! Component: 150 - total flux cleaned = -4.17364e-05 Jy ! Component: 200 - total flux cleaned = -4.09714e-05 Jy ! Total flux subtracted in 200 components = -4.09714e-05 Jy ! Clean residual min=-0.010579 max=0.013085 Jy/beam ! Clean residual mean=-0.000210 rms=0.004921 Jy/beam ! Combined flux in latest and established models = 0.898602 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 69 components and 0.898602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102955Jy sigma=0.000614 ! Fit after self-cal, rms=0.102954Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.534 mas, bmaj=7.148 mas, bpa=8.284 degrees ! Estimated noise=5134.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.534 x 7.148 at 8.284 degrees (North through East) ! Clean map min=-0.0096975 max=0.70045 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102954Jy sigma=0.000614 ! Fit after self-cal, rms=0.092120Jy sigma=0.000535 ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.146 mas, bpa=8.285 degrees ! Estimated noise=5127.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101052 Jy ! Component: 100 - total flux cleaned = 0.000143109 Jy ! Component: 150 - total flux cleaned = 0.000142993 Jy ! Component: 200 - total flux cleaned = 0.000127356 Jy ! Total flux subtracted in 200 components = 0.000127356 Jy ! Clean residual min=-0.009595 max=0.010475 Jy/beam ! Clean residual mean=-0.000080 rms=0.002964 Jy/beam ! Combined flux in latest and established models = 0.898729 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 73 components and 0.898729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092109Jy sigma=0.000535 ! Fit after self-cal, rms=0.092113Jy sigma=0.000535 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.83267e-05 Jy ! Component: 100 - total flux cleaned = -0.000114149 Jy ! Component: 150 - total flux cleaned = -0.000127869 Jy ! Component: 200 - total flux cleaned = -0.000127862 Jy ! Total flux subtracted in 200 components = -0.000127862 Jy ! Clean residual min=-0.009583 max=0.010438 Jy/beam ! Clean residual mean=-0.000080 rms=0.002961 Jy/beam ! Combined flux in latest and established models = 0.898602 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 73 components and 0.898602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092106Jy sigma=0.000535 ! Fit after self-cal, rms=0.092111Jy sigma=0.000535 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092111Jy sigma=0.000535 ! Fit after self-cal, rms=0.092075Jy sigma=0.000535 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=6.382 mas, bpa=10.36 degrees ! Estimated noise=5871.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.514504 Jy ! Component: 100 - total flux cleaned = 0.679611 Jy ! Component: 150 - total flux cleaned = 0.763235 Jy ! Component: 200 - total flux cleaned = 0.811532 Jy ! Total flux subtracted in 200 components = 0.811532 Jy ! Clean residual min=-0.018000 max=0.025968 Jy/beam ! Clean residual mean=-0.000353 rms=0.006791 Jy/beam ! Combined flux in latest and established models = 0.811532 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.811532 Jy ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.145 mas, bpa=8.293 degrees ! Estimated noise=5126.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040248 Jy ! Component: 100 - total flux cleaned = 0.0617979 Jy ! Component: 150 - total flux cleaned = 0.0736773 Jy ! Component: 200 - total flux cleaned = 0.0802325 Jy ! Total flux subtracted in 200 components = 0.0802325 Jy ! Clean residual min=-0.010039 max=0.010312 Jy/beam ! Clean residual mean=-0.000090 rms=0.003131 Jy/beam ! Combined flux in latest and established models = 0.891765 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.891765 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.898 mas, bmaj=25 mas, bpa=3.244 degrees ! Estimated noise=7510.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589113 Jy ! Component: 100 - total flux cleaned = 0.00735436 Jy ! Component: 150 - total flux cleaned = 0.00747625 Jy ! Component: 200 - total flux cleaned = 0.00747633 Jy ! Total flux subtracted in 200 components = 0.00747633 Jy ! Clean residual min=-0.010668 max=0.013142 Jy/beam ! Clean residual mean=-0.000204 rms=0.004898 Jy/beam ! Combined flux in latest and established models = 0.899241 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.49261e-07 Jy ! Component: 100 - total flux cleaned = 7.29743e-07 Jy ! Component: 150 - total flux cleaned = 1.6274e-06 Jy ! Component: 200 - total flux cleaned = 4.69458e-06 Jy ! Total flux subtracted in 200 components = 4.69458e-06 Jy ! Clean residual min=-0.010598 max=0.013187 Jy/beam ! Clean residual mean=-0.000204 rms=0.004885 Jy/beam ! Combined flux in latest and established models = 0.899246 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.899246 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.145 mas, bpa=8.293 degrees ! Estimated noise=5126.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336597 Jy ! Component: 100 - total flux cleaned = 0.000390623 Jy ! Component: 150 - total flux cleaned = 0.000365262 Jy ! Component: 200 - total flux cleaned = 0.000364616 Jy ! Total flux subtracted in 200 components = 0.000364616 Jy ! Clean residual min=-0.009338 max=0.010907 Jy/beam ! Clean residual mean=-0.000078 rms=0.002978 Jy/beam ! Combined flux in latest and established models = 0.89961 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.89961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092111Jy sigma=0.000535 ! Fit after self-cal, rms=0.092106Jy sigma=0.000535 wmodel J0406-3826_S_2017_07_16_pus_map.mod ! Writing 65 model components to file: J0406-3826_S_2017_07_16_pus_map.mod wobs J0406-3826_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0406-3826_S_2017_07_16_pus_uvs.fits wwins J0406-3826_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0406-3826_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304073 Jy ! Component: 100 - total flux cleaned = 0.00352509 Jy ! Component: 150 - total flux cleaned = 0.00353452 Jy ! Component: 200 - total flux cleaned = 0.00353592 Jy ! Component: 250 - total flux cleaned = 0.00329418 Jy ! Component: 300 - total flux cleaned = 0.00250854 Jy ! Component: 350 - total flux cleaned = 0.00154957 Jy ! Component: 400 - total flux cleaned = 0.000533692 Jy ! Component: 450 - total flux cleaned = -0.000345087 Jy ! Component: 500 - total flux cleaned = -0.00109692 Jy ! Component: 550 - total flux cleaned = -0.0015522 Jy ! Component: 600 - total flux cleaned = -0.00199443 Jy ! Component: 650 - total flux cleaned = -0.00233852 Jy ! Component: 700 - total flux cleaned = -0.00250871 Jy ! Component: 750 - total flux cleaned = -0.00267677 Jy ! Component: 800 - total flux cleaned = -0.00276001 Jy ! Component: 850 - total flux cleaned = -0.00275922 Jy ! Component: 900 - total flux cleaned = -0.00284334 Jy ! Component: 950 - total flux cleaned = -0.00284398 Jy ! Component: 1000 - total flux cleaned = -0.00301662 Jy ! Component: 1050 - total flux cleaned = -0.00327875 Jy ! Component: 1100 - total flux cleaned = -0.00327885 Jy ! Component: 1150 - total flux cleaned = -0.00327828 Jy ! Component: 1200 - total flux cleaned = -0.00337128 Jy ! Component: 1250 - total flux cleaned = -0.00337153 Jy ! Component: 1300 - total flux cleaned = -0.00337227 Jy ! Component: 1350 - total flux cleaned = -0.00326997 Jy ! Component: 1400 - total flux cleaned = -0.00326893 Jy ! Component: 1450 - total flux cleaned = -0.00327076 Jy ! Component: 1500 - total flux cleaned = -0.00326987 Jy ! Component: 1550 - total flux cleaned = -0.00326867 Jy ! Component: 1600 - total flux cleaned = -0.00327071 Jy ! Component: 1650 - total flux cleaned = -0.00314359 Jy ! Component: 1700 - total flux cleaned = -0.00327318 Jy ! Component: 1750 - total flux cleaned = -0.0031408 Jy ! Component: 1800 - total flux cleaned = -0.00314088 Jy ! Component: 1850 - total flux cleaned = -0.00299655 Jy ! Component: 1900 - total flux cleaned = -0.00299535 Jy ! Component: 1950 - total flux cleaned = -0.00283282 Jy ! Component: 2000 - total flux cleaned = -0.00282828 Jy ! Component: 2050 - total flux cleaned = -0.00299668 Jy ! Component: 2100 - total flux cleaned = -0.00299777 Jy ! Component: 2150 - total flux cleaned = -0.00281215 Jy ! Component: 2200 - total flux cleaned = -0.00281043 Jy ! Component: 2250 - total flux cleaned = -0.00281172 Jy ! Component: 2300 - total flux cleaned = -0.00281382 Jy ! Component: 2350 - total flux cleaned = -0.00281491 Jy ! Component: 2400 - total flux cleaned = -0.00282145 Jy ! Component: 2450 - total flux cleaned = -0.00258562 Jy ! Component: 2500 - total flux cleaned = -0.00283464 Jy ! Component: 2550 - total flux cleaned = -0.00258515 Jy ! Component: 2600 - total flux cleaned = -0.00258964 Jy ! Component: 2650 - total flux cleaned = -0.00230843 Jy ! Component: 2700 - total flux cleaned = -0.00230313 Jy ! Component: 2750 - total flux cleaned = -0.00230175 Jy ! Component: 2800 - total flux cleaned = -0.00229913 Jy ! Component: 2850 - total flux cleaned = -0.00229553 Jy ! Component: 2900 - total flux cleaned = -0.00229352 Jy ! Component: 2950 - total flux cleaned = -0.00229587 Jy ! Component: 3000 - total flux cleaned = -0.00230023 Jy ! Component: 3050 - total flux cleaned = -0.00230194 Jy ! Component: 3100 - total flux cleaned = -0.00230395 Jy ! Component: 3150 - total flux cleaned = -0.00231676 Jy ! Component: 3200 - total flux cleaned = -0.00187625 Jy ! Component: 3250 - total flux cleaned = -0.00187191 Jy ! Component: 3300 - total flux cleaned = -0.00186875 Jy ! Component: 3350 - total flux cleaned = -0.00186742 Jy ! Component: 3400 - total flux cleaned = -0.00186287 Jy ! Component: 3450 - total flux cleaned = -0.00187062 Jy ! Component: 3500 - total flux cleaned = -0.00188457 Jy ! Component: 3550 - total flux cleaned = -0.0013011 Jy ! Component: 3600 - total flux cleaned = -0.00130134 Jy ! Component: 3650 - total flux cleaned = -0.00129625 Jy ! Component: 3700 - total flux cleaned = -0.00129745 Jy ! Component: 3750 - total flux cleaned = -0.00129762 Jy ! Component: 3800 - total flux cleaned = -0.00129657 Jy ! Component: 3850 - total flux cleaned = -0.00130388 Jy ! Component: 3900 - total flux cleaned = -0.0013184 Jy ! Component: 3950 - total flux cleaned = -0.000501661 Jy ! Component: 4000 - total flux cleaned = -0.000495889 Jy ! Component: 4050 - total flux cleaned = -0.000484981 Jy ! Total flux subtracted in 4096 components = -0.000489612 Jy ! Clean residual min=-0.055250 max=0.053141 Jy/beam ! Clean residual mean=0.001278 rms=0.013373 Jy/beam ! Combined flux in latest and established models = 0.899121 Jy keep ! Adding 109 model components to the UV plane model. ! The established model now contains 174 components and 0.89912 Jy ![Exited script file: muppet] wmap "J0406-3826_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.532 x 7.145 at 8.293 degrees (North through East) ! Clean map min=-0.089744 max=0.70359 Jy/beam ! Writing clean map to FITS file: J0406-3826_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.703595 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0155738 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.64037 6.64037 13.2807 26.5615 53.123 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0467 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.703 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.532 x 7.145 at 8.293 degrees (North through East) ! Clean map min=-0.089744 max=0.70359 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-3826_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:00:48 2019