! Started logfile: J0406-3826_S_2017_06_15_pus_uvs.log on Tue May 7 15:10:48 2019 obs J0406-3826_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0406-3826_S_2017_06_15_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.4 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0406-3826 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-3826_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.522549Jy sigma=0.004345 ! Fit after self-cal, rms=0.514080Jy sigma=0.004293 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=17.01 mas, bpa=1.332 degrees ! Estimated noise=4565.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.394226 Jy ! Component: 100 - total flux cleaned = 0.563873 Jy ! Total flux subtracted in 100 components = 0.563873 Jy ! Clean residual min=-0.067585 max=0.133048 Jy/beam ! Clean residual mean=0.000182 rms=0.026682 Jy/beam ! Combined flux in latest and established models = 0.563872 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.563872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278730Jy sigma=0.001892 ! Fit after self-cal, rms=0.278532Jy sigma=0.001891 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=17.77 mas, bpa=3.081 degrees ! Estimated noise=3996.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128849 Jy ! Component: 100 - total flux cleaned = 0.20421 Jy ! Component: 150 - total flux cleaned = 0.252501 Jy ! Component: 200 - total flux cleaned = 0.284619 Jy ! Total flux subtracted in 200 components = 0.284619 Jy ! Clean residual min=-0.062721 max=0.064420 Jy/beam ! Clean residual mean=0.000075 rms=0.020878 Jy/beam ! Combined flux in latest and established models = 0.848491 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 69 components and 0.848491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191164Jy sigma=0.001441 ! Fit after self-cal, rms=0.190884Jy sigma=0.001439 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.89 KP 1.00* ! LA 0.96 MK 1.00* NL 1.30 OV 0.86 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 2.36 KP 1.00* ! LA 0.91 MK 1.00* NL 1.48 OV 0.90 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 2.16 KP 1.00* ! LA 0.89 MK 1.00* NL 0.77 OV 0.80 ! PT 0.91 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.31 KP 1.00* ! LA 1.19 MK 1.00* NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.190884Jy sigma=0.001439 ! Fit after self-cal, rms=0.160303Jy sigma=0.000811 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=19.24 mas, bpa=4.44 degrees ! Estimated noise=4546.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0277633 Jy ! Component: 100 - total flux cleaned = -0.033386 Jy ! Component: 150 - total flux cleaned = -0.036551 Jy ! Component: 200 - total flux cleaned = -0.0392781 Jy ! Total flux subtracted in 200 components = -0.0392781 Jy ! Clean residual min=-0.026126 max=0.033544 Jy/beam ! Clean residual mean=0.000072 rms=0.008420 Jy/beam ! Combined flux in latest and established models = 0.809213 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.809213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143377Jy sigma=0.000751 ! Fit after self-cal, rms=0.143624Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143624Jy sigma=0.000749 ! Fit after self-cal, rms=0.139735Jy sigma=0.000719 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=19.57 mas, bpa=4.624 degrees ! Estimated noise=4596.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.018067 Jy ! Component: 100 - total flux cleaned = -0.0206468 Jy ! Component: 150 - total flux cleaned = -0.0229041 Jy ! Component: 200 - total flux cleaned = -0.0232043 Jy ! Total flux subtracted in 200 components = -0.0232043 Jy ! Clean residual min=-0.020954 max=0.020981 Jy/beam ! Clean residual mean=0.000044 rms=0.006624 Jy/beam ! Combined flux in latest and established models = 0.786009 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.786009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133340Jy sigma=0.000699 ! Fit after self-cal, rms=0.133480Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000524109 Jy ! Component: 100 - total flux cleaned = -0.000743253 Jy ! Component: 150 - total flux cleaned = -0.000950766 Jy ! Component: 200 - total flux cleaned = -0.00116838 Jy ! Total flux subtracted in 200 components = -0.00116838 Jy ! Clean residual min=-0.020073 max=0.020820 Jy/beam ! Clean residual mean=0.000048 rms=0.006526 Jy/beam ! Combined flux in latest and established models = 0.784841 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 0.784841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132235Jy sigma=0.000696 ! Fit after self-cal, rms=0.132243Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132243Jy sigma=0.000696 ! Fit after self-cal, rms=0.132785Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.845 mas, bmaj=19.81 mas, bpa=4.759 degrees ! Estimated noise=4624.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0116893 Jy ! Component: 100 - total flux cleaned = -0.0140059 Jy ! Component: 150 - total flux cleaned = -0.0158076 Jy ! Component: 200 - total flux cleaned = -0.016029 Jy ! Total flux subtracted in 200 components = -0.016029 Jy ! Clean residual min=-0.017939 max=0.017563 Jy/beam ! Clean residual mean=0.000029 rms=0.005607 Jy/beam ! Combined flux in latest and established models = 0.768812 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 122 components and 0.768812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129899Jy sigma=0.000676 ! Fit after self-cal, rms=0.130029Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000424363 Jy ! Component: 100 - total flux cleaned = -0.000625266 Jy ! Component: 150 - total flux cleaned = -0.000819326 Jy ! Component: 200 - total flux cleaned = -0.00118911 Jy ! Total flux subtracted in 200 components = -0.00118911 Jy ! Clean residual min=-0.017308 max=0.017417 Jy/beam ! Clean residual mean=0.000033 rms=0.005517 Jy/beam ! Combined flux in latest and established models = 0.767623 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 125 components and 0.767623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129151Jy sigma=0.000674 ! Fit after self-cal, rms=0.129158Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129158Jy sigma=0.000674 ! Fit after self-cal, rms=0.130228Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.739 mas, bmaj=27.8 mas, bpa=-3.486 degrees ! Estimated noise=5189.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00688835 Jy ! Component: 100 - total flux cleaned = -0.00717045 Jy ! Component: 150 - total flux cleaned = -0.00717675 Jy ! Component: 200 - total flux cleaned = -0.00741923 Jy ! Total flux subtracted in 200 components = -0.00741923 Jy ! Clean residual min=-0.018532 max=0.017774 Jy/beam ! Clean residual mean=0.000024 rms=0.005513 Jy/beam ! Combined flux in latest and established models = 0.760204 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 132 components and 0.760204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128555Jy sigma=0.000668 ! Fit after self-cal, rms=0.128634Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000233135 Jy ! Component: 100 - total flux cleaned = -0.000216385 Jy ! Component: 150 - total flux cleaned = -0.0002064 Jy ! Component: 200 - total flux cleaned = -0.000391545 Jy ! Total flux subtracted in 200 components = -0.000391545 Jy ! Clean residual min=-0.017880 max=0.017719 Jy/beam ! Clean residual mean=0.000028 rms=0.005356 Jy/beam ! Combined flux in latest and established models = 0.759812 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 135 components and 0.759812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128235Jy sigma=0.000670 ! Fit after self-cal, rms=0.128230Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.848 mas, bmaj=19.99 mas, bpa=4.856 degrees ! Estimated noise=4636.71 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.848 x 19.99 at 4.856 degrees (North through East) ! Clean map min=-0.016202 max=0.5148 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128230Jy sigma=0.000670 ! Fit after self-cal, rms=0.121148Jy sigma=0.000609 ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=20.02 mas, bpa=4.994 degrees ! Estimated noise=4597.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00922625 Jy ! Component: 100 - total flux cleaned = -0.0105007 Jy ! Component: 150 - total flux cleaned = -0.0114991 Jy ! Component: 200 - total flux cleaned = -0.0117933 Jy ! Total flux subtracted in 200 components = -0.0117933 Jy ! Clean residual min=-0.015047 max=0.016297 Jy/beam ! Clean residual mean=0.000018 rms=0.004673 Jy/beam ! Combined flux in latest and established models = 0.748019 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 144 components and 0.748019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119832Jy sigma=0.000604 ! Fit after self-cal, rms=0.119856Jy sigma=0.000604 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131975 Jy ! Component: 100 - total flux cleaned = -0.00040104 Jy ! Component: 150 - total flux cleaned = -0.000524071 Jy ! Component: 200 - total flux cleaned = -0.000647149 Jy ! Total flux subtracted in 200 components = -0.000647149 Jy ! Clean residual min=-0.015009 max=0.016327 Jy/beam ! Clean residual mean=0.000020 rms=0.004604 Jy/beam ! Combined flux in latest and established models = 0.747372 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 147 components and 0.747372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119515Jy sigma=0.000602 ! Fit after self-cal, rms=0.119520Jy sigma=0.000602 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119520Jy sigma=0.000602 ! Fit after self-cal, rms=0.120988Jy sigma=0.000600 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=18.28 mas, bpa=4.073 degrees ! Estimated noise=5567.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.461036 Jy ! Component: 100 - total flux cleaned = 0.586622 Jy ! Component: 150 - total flux cleaned = 0.650884 Jy ! Component: 200 - total flux cleaned = 0.689385 Jy ! Total flux subtracted in 200 components = 0.689385 Jy ! Clean residual min=-0.020436 max=0.041997 Jy/beam ! Clean residual mean=0.000034 rms=0.007769 Jy/beam ! Combined flux in latest and established models = 0.689385 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.689385 Jy ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=20.16 mas, bpa=5.076 degrees ! Estimated noise=4605.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347057 Jy ! Component: 100 - total flux cleaned = 0.0407967 Jy ! Component: 150 - total flux cleaned = 0.0422242 Jy ! Component: 200 - total flux cleaned = 0.0428964 Jy ! Total flux subtracted in 200 components = 0.0428964 Jy ! Clean residual min=-0.014384 max=0.017635 Jy/beam ! Clean residual mean=0.000001 rms=0.004652 Jy/beam ! Combined flux in latest and established models = 0.732282 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 79 components and 0.732282 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.796 mas, bmaj=27.9 mas, bpa=-3.238 degrees ! Estimated noise=5161.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110394 Jy ! Component: 100 - total flux cleaned = 0.001375 Jy ! Component: 150 - total flux cleaned = 0.00137849 Jy ! Component: 200 - total flux cleaned = 0.00119052 Jy ! Total flux subtracted in 200 components = 0.00119052 Jy ! Clean residual min=-0.014376 max=0.017257 Jy/beam ! Clean residual mean=-0.000039 rms=0.005660 Jy/beam ! Combined flux in latest and established models = 0.733472 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515762 Jy ! Component: 100 - total flux cleaned = -0.00100273 Jy ! Component: 150 - total flux cleaned = -0.00116173 Jy ! Component: 200 - total flux cleaned = -0.0011662 Jy ! Total flux subtracted in 200 components = -0.0011662 Jy ! Clean residual min=-0.014182 max=0.016718 Jy/beam ! Clean residual mean=-0.000041 rms=0.005620 Jy/beam ! Combined flux in latest and established models = 0.732306 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 106 components and 0.732306 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=20.16 mas, bpa=5.076 degrees ! Estimated noise=4605.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198975 Jy ! Component: 100 - total flux cleaned = -0.00156747 Jy ! Component: 150 - total flux cleaned = -0.00137311 Jy ! Component: 200 - total flux cleaned = -0.00119695 Jy ! Total flux subtracted in 200 components = -0.00119695 Jy ! Clean residual min=-0.013063 max=0.013891 Jy/beam ! Clean residual mean=-0.000023 rms=0.004110 Jy/beam ! Combined flux in latest and established models = 0.731109 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 137 components and 0.731109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117997Jy sigma=0.000592 ! Fit after self-cal, rms=0.117735Jy sigma=0.000589 wmodel J0406-3826_S_2017_06_15_pus_map.mod ! Writing 137 model components to file: J0406-3826_S_2017_06_15_pus_map.mod wobs J0406-3826_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0406-3826_S_2017_06_15_pus_uvs.fits wwins J0406-3826_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J0406-3826_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210586 Jy ! Component: 100 - total flux cleaned = -0.00250259 Jy ! Component: 150 - total flux cleaned = -0.00249788 Jy ! Component: 200 - total flux cleaned = -0.002839 Jy ! Component: 250 - total flux cleaned = -0.0026803 Jy ! Component: 300 - total flux cleaned = -0.00282985 Jy ! Component: 350 - total flux cleaned = -0.00269298 Jy ! Component: 400 - total flux cleaned = -0.00255774 Jy ! Component: 450 - total flux cleaned = -0.00231402 Jy ! Component: 500 - total flux cleaned = -0.00288589 Jy ! Component: 550 - total flux cleaned = -0.00321703 Jy ! Component: 600 - total flux cleaned = -0.00353258 Jy ! Component: 650 - total flux cleaned = -0.00413387 Jy ! Component: 700 - total flux cleaned = -0.00451415 Jy ! Component: 750 - total flux cleaned = -0.00469499 Jy ! Component: 800 - total flux cleaned = -0.00496227 Jy ! Component: 850 - total flux cleaned = -0.00539597 Jy ! Component: 900 - total flux cleaned = -0.00556373 Jy ! Component: 950 - total flux cleaned = -0.00581119 Jy ! Component: 1000 - total flux cleaned = -0.00613213 Jy ! Component: 1050 - total flux cleaned = -0.00628889 Jy ! Component: 1100 - total flux cleaned = -0.00667498 Jy ! Component: 1150 - total flux cleaned = -0.00667549 Jy ! Component: 1200 - total flux cleaned = -0.00675132 Jy ! Component: 1250 - total flux cleaned = -0.00682573 Jy ! Component: 1300 - total flux cleaned = -0.00682578 Jy ! Component: 1350 - total flux cleaned = -0.00675297 Jy ! Component: 1400 - total flux cleaned = -0.00660926 Jy ! Component: 1450 - total flux cleaned = -0.00668014 Jy ! Component: 1500 - total flux cleaned = -0.00667953 Jy ! Component: 1550 - total flux cleaned = -0.00682061 Jy ! Component: 1600 - total flux cleaned = -0.00674997 Jy ! Component: 1650 - total flux cleaned = -0.00674992 Jy ! Component: 1700 - total flux cleaned = -0.00682013 Jy ! Component: 1750 - total flux cleaned = -0.00689051 Jy ! Component: 1800 - total flux cleaned = -0.00689071 Jy ! Component: 1850 - total flux cleaned = -0.00696062 Jy ! Component: 1900 - total flux cleaned = -0.00688892 Jy ! Component: 1950 - total flux cleaned = -0.00652796 Jy ! Component: 2000 - total flux cleaned = -0.00638153 Jy ! Component: 2050 - total flux cleaned = -0.00601076 Jy ! Component: 2100 - total flux cleaned = -0.00570812 Jy ! Component: 2150 - total flux cleaned = -0.00540095 Jy ! Component: 2200 - total flux cleaned = -0.00508893 Jy ! Component: 2250 - total flux cleaned = -0.0046901 Jy ! Component: 2300 - total flux cleaned = -0.00420299 Jy ! Component: 2350 - total flux cleaned = -0.00378683 Jy ! Component: 2400 - total flux cleaned = -0.00327707 Jy ! Component: 2450 - total flux cleaned = -0.00275472 Jy ! Component: 2500 - total flux cleaned = -0.00221966 Jy ! Component: 2550 - total flux cleaned = -0.00158175 Jy ! Component: 2600 - total flux cleaned = -0.00101972 Jy ! Component: 2650 - total flux cleaned = -0.000444204 Jy ! Component: 2700 - total flux cleaned = 0.000145332 Jy ! Component: 2750 - total flux cleaned = 0.000748299 Jy ! Component: 2800 - total flux cleaned = 0.00136716 Jy ! Component: 2850 - total flux cleaned = 0.00210451 Jy ! Component: 2900 - total flux cleaned = 0.00264569 Jy ! Component: 2950 - total flux cleaned = 0.00331012 Jy ! Component: 3000 - total flux cleaned = 0.00399118 Jy ! Component: 3050 - total flux cleaned = 0.00457289 Jy ! Component: 3100 - total flux cleaned = 0.00493716 Jy ! Component: 3150 - total flux cleaned = 0.0054355 Jy ! Component: 3200 - total flux cleaned = 0.00581928 Jy ! Component: 3250 - total flux cleaned = 0.00634868 Jy ! Component: 3300 - total flux cleaned = 0.00675759 Jy ! Component: 3350 - total flux cleaned = 0.00717744 Jy ! Component: 3400 - total flux cleaned = 0.00775503 Jy ! Component: 3450 - total flux cleaned = 0.00835603 Jy ! Component: 3500 - total flux cleaned = 0.00882285 Jy ! Component: 3550 - total flux cleaned = 0.00930016 Jy ! Component: 3600 - total flux cleaned = 0.0099567 Jy ! Component: 3650 - total flux cleaned = 0.0102959 Jy ! Component: 3700 - total flux cleaned = 0.0108204 Jy ! Component: 3750 - total flux cleaned = 0.011364 Jy ! Component: 3800 - total flux cleaned = 0.0119253 Jy ! Component: 3850 - total flux cleaned = 0.0125078 Jy ! Component: 3900 - total flux cleaned = 0.0129053 Jy ! Component: 3950 - total flux cleaned = 0.0135195 Jy ! Component: 4000 - total flux cleaned = 0.0141572 Jy ! Component: 4050 - total flux cleaned = 0.0148194 Jy ! Total flux subtracted in 4096 components = 0.0152754 Jy ! Clean residual min=-0.012925 max=0.012722 Jy/beam ! Clean residual mean=0.000024 rms=0.003224 Jy/beam ! Combined flux in latest and established models = 0.746385 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 400 components and 0.746384 Jy ![Exited script file: muppet] wmap "J0406-3826_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 20.16 at 5.076 degrees (North through East) ! Clean map min=-0.033741 max=0.58723 Jy/beam ! Writing clean map to FITS file: J0406-3826_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.587229 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00330069 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.68623 1.68623 3.37247 6.74494 13.4899 26.9798 53.9595 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0099 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.587 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 20.16 at 5.076 degrees (North through East) ! Clean map min=-0.033741 max=0.58723 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-3826_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:10:53 2019