! Started logfile: J0406-3826_S_2017_06_10_pus_uvs.log on Mon May 6 14:44:57 2019 obs J0406-3826_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0406-3826_S_2017_06_10_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.583575 visibilities/baseline/integration-bin. ! Found source: J0406-3826 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 2416 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-3826_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.387744Jy sigma=0.002450 ! Fit after self-cal, rms=0.354709Jy sigma=0.002235 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=6.646 mas, bpa=-6.977 degrees ! Estimated noise=3514.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.519908 Jy ! Component: 100 - total flux cleaned = 0.696296 Jy ! Total flux subtracted in 100 components = 0.696296 Jy ! Clean residual min=-0.039535 max=0.081005 Jy/beam ! Clean residual mean=0.000558 rms=0.014722 Jy/beam ! Combined flux in latest and established models = 0.696296 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.696296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210535Jy sigma=0.001379 ! Fit after self-cal, rms=0.210284Jy sigma=0.001377 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=7.685 mas, bpa=-8.612 degrees ! Estimated noise=2708.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132355 Jy ! Component: 100 - total flux cleaned = 0.191758 Jy ! Component: 150 - total flux cleaned = 0.219753 Jy ! Component: 200 - total flux cleaned = 0.233746 Jy ! Total flux subtracted in 200 components = 0.233746 Jy ! Clean residual min=-0.012683 max=0.018925 Jy/beam ! Clean residual mean=0.000056 rms=0.004271 Jy/beam ! Combined flux in latest and established models = 0.930042 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 0.930042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123708Jy sigma=0.000742 ! Fit after self-cal, rms=0.123549Jy sigma=0.000741 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.03 ! LA 1.01 MK 1.01 NL 1.00* OV 1.00 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 0.98 ! LA 0.95 MK 0.99 NL 1.00* OV 1.04 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.96 ! LA 0.97 MK 1.03 NL 1.26 OV 0.94 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.00* ! LA 0.94 MK 0.94 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.123549Jy sigma=0.000741 ! Fit after self-cal, rms=0.112088Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.716 mas, bpa=-8.768 degrees ! Estimated noise=2704.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000862976 Jy ! Component: 100 - total flux cleaned = 0.000700486 Jy ! Component: 150 - total flux cleaned = 0.000697389 Jy ! Component: 200 - total flux cleaned = 0.000698519 Jy ! Total flux subtracted in 200 components = 0.000698519 Jy ! Clean residual min=-0.007445 max=0.008498 Jy/beam ! Clean residual mean=-0.000034 rms=0.002094 Jy/beam ! Combined flux in latest and established models = 0.93074 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.93074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111964Jy sigma=0.000672 ! Fit after self-cal, rms=0.112056Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112056Jy sigma=0.000672 ! Fit after self-cal, rms=0.111892Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=7.709 mas, bpa=-8.798 degrees ! Estimated noise=2700.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442147 Jy ! Component: 100 - total flux cleaned = 0.000314892 Jy ! Component: 150 - total flux cleaned = 0.000256371 Jy ! Component: 200 - total flux cleaned = 0.00025633 Jy ! Total flux subtracted in 200 components = 0.00025633 Jy ! Clean residual min=-0.007376 max=0.008199 Jy/beam ! Clean residual mean=-0.000034 rms=0.002073 Jy/beam ! Combined flux in latest and established models = 0.930997 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.930997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111815Jy sigma=0.000671 ! Fit after self-cal, rms=0.111808Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.81601e-05 Jy ! Component: 100 - total flux cleaned = -5.05902e-06 Jy ! Component: 150 - total flux cleaned = -4.14436e-06 Jy ! Component: 200 - total flux cleaned = -6.1502e-06 Jy ! Total flux subtracted in 200 components = -6.1502e-06 Jy ! Clean residual min=-0.007331 max=0.007992 Jy/beam ! Clean residual mean=-0.000034 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.930991 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.930991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111758Jy sigma=0.000671 ! Fit after self-cal, rms=0.111755Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111755Jy sigma=0.000671 ! Fit after self-cal, rms=0.110006Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.706 mas, bpa=-8.812 degrees ! Estimated noise=2699.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434143 Jy ! Component: 100 - total flux cleaned = 0.00053862 Jy ! Component: 150 - total flux cleaned = 0.000537403 Jy ! Component: 200 - total flux cleaned = 0.000535903 Jy ! Total flux subtracted in 200 components = 0.000535903 Jy ! Clean residual min=-0.007313 max=0.007741 Jy/beam ! Clean residual mean=-0.000023 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 0.931527 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.931527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109962Jy sigma=0.000662 ! Fit after self-cal, rms=0.109958Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.25432e-05 Jy ! Component: 100 - total flux cleaned = -5.34277e-05 Jy ! Component: 150 - total flux cleaned = -5.12438e-05 Jy ! Component: 200 - total flux cleaned = -9.2247e-05 Jy ! Total flux subtracted in 200 components = -9.2247e-05 Jy ! Clean residual min=-0.007230 max=0.007603 Jy/beam ! Clean residual mean=-0.000023 rms=0.001881 Jy/beam ! Combined flux in latest and established models = 0.931434 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.931434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109925Jy sigma=0.000662 ! Fit after self-cal, rms=0.109923Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109923Jy sigma=0.000662 ! Fit after self-cal, rms=0.109672Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.903 mas, bmaj=28.56 mas, bpa=-4.889 degrees ! Estimated noise=3647.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480007 Jy ! Component: 100 - total flux cleaned = 0.000481186 Jy ! Component: 150 - total flux cleaned = 0.000483314 Jy ! Component: 200 - total flux cleaned = 0.000486186 Jy ! Total flux subtracted in 200 components = 0.000486186 Jy ! Clean residual min=-0.007197 max=0.007260 Jy/beam ! Clean residual mean=-0.000042 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 0.931921 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.931921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109681Jy sigma=0.000661 ! Fit after self-cal, rms=0.109665Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.2176e-06 Jy ! Component: 100 - total flux cleaned = -1.29294e-05 Jy ! Component: 150 - total flux cleaned = -1.38672e-05 Jy ! Component: 200 - total flux cleaned = -1.30806e-05 Jy ! Total flux subtracted in 200 components = -1.30806e-05 Jy ! Clean residual min=-0.007198 max=0.007265 Jy/beam ! Clean residual mean=-0.000042 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 0.931908 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.931907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109678Jy sigma=0.000661 ! Fit after self-cal, rms=0.109664Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=7.705 mas, bpa=-8.84 degrees ! Estimated noise=2696.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.815 x 7.705 at -8.84 degrees (North through East) ! Clean map min=-0.0066407 max=0.71603 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109664Jy sigma=0.000661 ! Fit after self-cal, rms=0.100938Jy sigma=0.000598 ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.709 mas, bpa=-8.79 degrees ! Estimated noise=2701.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277628 Jy ! Component: 100 - total flux cleaned = -0.000368518 Jy ! Component: 150 - total flux cleaned = -0.000370953 Jy ! Component: 200 - total flux cleaned = -0.000409665 Jy ! Total flux subtracted in 200 components = -0.000409665 Jy ! Clean residual min=-0.007309 max=0.007284 Jy/beam ! Clean residual mean=-0.000018 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.931498 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 48 components and 0.931498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100898Jy sigma=0.000598 ! Fit after self-cal, rms=0.100899Jy sigma=0.000598 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.43752e-06 Jy ! Component: 100 - total flux cleaned = -8.06196e-06 Jy ! Component: 150 - total flux cleaned = -8.18833e-06 Jy ! Component: 200 - total flux cleaned = -4.2325e-05 Jy ! Total flux subtracted in 200 components = -4.2325e-05 Jy ! Clean residual min=-0.007231 max=0.007207 Jy/beam ! Clean residual mean=-0.000018 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.931455 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.931456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100874Jy sigma=0.000598 ! Fit after self-cal, rms=0.100875Jy sigma=0.000598 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100875Jy sigma=0.000598 ! Fit after self-cal, rms=0.100778Jy sigma=0.000598 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=6.62 mas, bpa=-6.935 degrees ! Estimated noise=3547.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.52392 Jy ! Component: 100 - total flux cleaned = 0.704188 Jy ! Component: 150 - total flux cleaned = 0.798241 Jy ! Component: 200 - total flux cleaned = 0.851284 Jy ! Total flux subtracted in 200 components = 0.851284 Jy ! Clean residual min=-0.015808 max=0.026298 Jy/beam ! Clean residual mean=0.000162 rms=0.005060 Jy/beam ! Combined flux in latest and established models = 0.851284 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.851284 Jy ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.707 mas, bpa=-8.812 degrees ! Estimated noise=2698.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0426861 Jy ! Component: 100 - total flux cleaned = 0.062329 Jy ! Component: 150 - total flux cleaned = 0.0715802 Jy ! Component: 200 - total flux cleaned = 0.0759738 Jy ! Total flux subtracted in 200 components = 0.0759738 Jy ! Clean residual min=-0.007294 max=0.007212 Jy/beam ! Clean residual mean=-0.000014 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 0.927258 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.927258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.908 mas, bmaj=28.58 mas, bpa=-4.865 degrees ! Estimated noise=3647.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306838 Jy ! Component: 100 - total flux cleaned = 0.0036522 Jy ! Component: 150 - total flux cleaned = 0.00367089 Jy ! Component: 200 - total flux cleaned = 0.00368917 Jy ! Total flux subtracted in 200 components = 0.00368917 Jy ! Clean residual min=-0.007355 max=0.007187 Jy/beam ! Clean residual mean=-0.000032 rms=0.002618 Jy/beam ! Combined flux in latest and established models = 0.930947 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.77484e-05 Jy ! Component: 100 - total flux cleaned = 3.4944e-05 Jy ! Component: 150 - total flux cleaned = 5.16264e-05 Jy ! Component: 200 - total flux cleaned = 6.69894e-05 Jy ! Total flux subtracted in 200 components = 6.69894e-05 Jy ! Clean residual min=-0.007359 max=0.007142 Jy/beam ! Clean residual mean=-0.000033 rms=0.002612 Jy/beam ! Combined flux in latest and established models = 0.931014 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 28 components and 0.931014 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.707 mas, bpa=-8.812 degrees ! Estimated noise=2698.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000666804 Jy ! Component: 100 - total flux cleaned = -0.000682078 Jy ! Component: 150 - total flux cleaned = -0.000639163 Jy ! Component: 200 - total flux cleaned = -0.000640974 Jy ! Total flux subtracted in 200 components = -0.000640974 Jy ! Clean residual min=-0.006914 max=0.007325 Jy/beam ! Clean residual mean=-0.000017 rms=0.001846 Jy/beam ! Combined flux in latest and established models = 0.930373 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.930373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100812Jy sigma=0.000598 ! Fit after self-cal, rms=0.100802Jy sigma=0.000598 wmodel J0406-3826_S_2017_06_10_pus_map.mod ! Writing 32 model components to file: J0406-3826_S_2017_06_10_pus_map.mod wobs J0406-3826_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0406-3826_S_2017_06_10_pus_uvs.fits wwins J0406-3826_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0406-3826_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515236 Jy ! Component: 100 - total flux cleaned = -0.000285632 Jy ! Component: 150 - total flux cleaned = -0.000698044 Jy ! Component: 200 - total flux cleaned = -0.000892714 Jy ! Component: 250 - total flux cleaned = -0.000986112 Jy ! Component: 300 - total flux cleaned = -0.000983248 Jy ! Component: 350 - total flux cleaned = -0.000814124 Jy ! Component: 400 - total flux cleaned = -0.000812729 Jy ! Component: 450 - total flux cleaned = -0.000650651 Jy ! Component: 500 - total flux cleaned = -0.000803788 Jy ! Component: 550 - total flux cleaned = -0.00110512 Jy ! Component: 600 - total flux cleaned = -0.00169191 Jy ! Component: 650 - total flux cleaned = -0.00211937 Jy ! Component: 700 - total flux cleaned = -0.00246696 Jy ! Component: 750 - total flux cleaned = -0.00287565 Jy ! Component: 800 - total flux cleaned = -0.00333972 Jy ! Component: 850 - total flux cleaned = -0.00359793 Jy ! Component: 900 - total flux cleaned = -0.00397593 Jy ! Component: 950 - total flux cleaned = -0.0041605 Jy ! Component: 1000 - total flux cleaned = -0.00428113 Jy ! Component: 1050 - total flux cleaned = -0.004222 Jy ! Component: 1100 - total flux cleaned = -0.00404873 Jy ! Component: 1150 - total flux cleaned = -0.00404862 Jy ! Component: 1200 - total flux cleaned = -0.00399136 Jy ! Component: 1250 - total flux cleaned = -0.00388038 Jy ! Component: 1300 - total flux cleaned = -0.00388001 Jy ! Component: 1350 - total flux cleaned = -0.0039881 Jy ! Component: 1400 - total flux cleaned = -0.00409394 Jy ! Component: 1450 - total flux cleaned = -0.00424982 Jy ! Component: 1500 - total flux cleaned = -0.00435255 Jy ! Component: 1550 - total flux cleaned = -0.0044544 Jy ! Component: 1600 - total flux cleaned = -0.00465578 Jy ! Component: 1650 - total flux cleaned = -0.00495246 Jy ! Component: 1700 - total flux cleaned = -0.00500078 Jy ! Component: 1750 - total flux cleaned = -0.00524307 Jy ! Component: 1800 - total flux cleaned = -0.00543425 Jy ! Component: 1850 - total flux cleaned = -0.00552943 Jy ! Component: 1900 - total flux cleaned = -0.00585816 Jy ! Component: 1950 - total flux cleaned = -0.00604395 Jy ! Component: 2000 - total flux cleaned = -0.00613624 Jy ! Component: 2050 - total flux cleaned = -0.00636488 Jy ! Component: 2100 - total flux cleaned = -0.00654644 Jy ! Component: 2150 - total flux cleaned = -0.00677211 Jy ! Component: 2200 - total flux cleaned = -0.00690683 Jy ! Component: 2250 - total flux cleaned = -0.00712992 Jy ! Component: 2300 - total flux cleaned = -0.00726299 Jy ! Component: 2350 - total flux cleaned = -0.00748339 Jy ! Component: 2400 - total flux cleaned = -0.00752753 Jy ! Component: 2450 - total flux cleaned = -0.00774611 Jy ! Component: 2500 - total flux cleaned = -0.00787641 Jy ! Component: 2550 - total flux cleaned = -0.00809293 Jy ! Component: 2600 - total flux cleaned = -0.00809266 Jy ! Component: 2650 - total flux cleaned = -0.00826463 Jy ! Component: 2700 - total flux cleaned = -0.00852222 Jy ! Component: 2750 - total flux cleaned = -0.00873664 Jy ! Component: 2800 - total flux cleaned = -0.00890808 Jy ! Component: 2850 - total flux cleaned = -0.00907893 Jy ! Component: 2900 - total flux cleaned = -0.00929255 Jy ! Component: 2950 - total flux cleaned = -0.00946305 Jy ! Component: 3000 - total flux cleaned = -0.00963345 Jy ! Component: 3050 - total flux cleaned = -0.00971892 Jy ! Component: 3100 - total flux cleaned = -0.00997478 Jy ! Component: 3150 - total flux cleaned = -0.0100595 Jy ! Component: 3200 - total flux cleaned = -0.0102301 Jy ! Component: 3250 - total flux cleaned = -0.0104009 Jy ! Component: 3300 - total flux cleaned = -0.0105722 Jy ! Component: 3350 - total flux cleaned = -0.0107008 Jy ! Component: 3400 - total flux cleaned = -0.0109157 Jy ! Component: 3450 - total flux cleaned = -0.0111313 Jy ! Component: 3500 - total flux cleaned = -0.0112176 Jy ! Component: 3550 - total flux cleaned = -0.0114352 Jy ! Component: 3600 - total flux cleaned = -0.0116102 Jy ! Component: 3650 - total flux cleaned = -0.01183 Jy ! Component: 3700 - total flux cleaned = -0.012007 Jy ! Component: 3750 - total flux cleaned = -0.0122297 Jy ! Component: 3800 - total flux cleaned = -0.012364 Jy ! Component: 3850 - total flux cleaned = -0.0125897 Jy ! Component: 3900 - total flux cleaned = -0.0128167 Jy ! Component: 3950 - total flux cleaned = -0.0129537 Jy ! Component: 4000 - total flux cleaned = -0.0131375 Jy ! Component: 4050 - total flux cleaned = -0.0134155 Jy ! Total flux subtracted in 4096 components = -0.0135556 Jy ! Clean residual min=-0.002745 max=0.002992 Jy/beam ! Clean residual mean=-0.000024 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.916817 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 266 components and 0.916818 Jy ![Exited script file: muppet] wmap "J0406-3826_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.817 x 7.707 at -8.812 degrees (North through East) ! Clean map min=-0.0048447 max=0.72113 Jy/beam ! Writing clean map to FITS file: J0406-3826_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.721129 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000814794 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.338966 0.338966 0.677932 1.35586 2.71173 5.42345 10.8469 21.6938 43.3876 86.7753 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.721 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.817 x 7.707 at -8.812 degrees (North through East) ! Clean map min=-0.0048447 max=0.72113 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-3826_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:45:02 2019