! Started logfile: J0406-3826_S_2017_05_27_pus_uvs.log on Fri May 3 10:56:45 2019 obs J0406-3826_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0406-3826_S_2017_05_27_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.433333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0406-3826 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-3826_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.303714Jy sigma=0.001476 ! Fit after self-cal, rms=0.288285Jy sigma=0.001400 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=29.21 mas, bpa=-12.79 degrees ! Estimated noise=6294.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.683249 Jy ! Component: 100 - total flux cleaned = 0.884082 Jy ! Total flux subtracted in 100 components = 0.884082 Jy ! Clean residual min=-0.045318 max=0.091656 Jy/beam ! Clean residual mean=-0.001490 rms=0.022286 Jy/beam ! Combined flux in latest and established models = 0.884082 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.884082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266983Jy sigma=0.001368 ! Fit after self-cal, rms=0.266942Jy sigma=0.001368 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=29.14 mas, bpa=-12.46 degrees ! Estimated noise=5347.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144229 Jy ! Component: 100 - total flux cleaned = 0.21242 Jy ! Component: 150 - total flux cleaned = 0.248726 Jy ! Component: 200 - total flux cleaned = 0.265951 Jy ! Total flux subtracted in 200 components = 0.265951 Jy ! Clean residual min=-0.027661 max=0.029967 Jy/beam ! Clean residual mean=-0.000832 rms=0.010229 Jy/beam ! Combined flux in latest and established models = 1.15003 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 74 components and 1.15003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192957Jy sigma=0.000848 ! Fit after self-cal, rms=0.192955Jy sigma=0.000848 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.02 ! LA 0.98 MK 1.04 NL 1.03 OV 0.96 ! PT 1.08 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.99 ! LA 0.95 MK 1.00 NL 1.32 OV 1.00 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.99 ! LA 0.97 MK 1.03 NL 1.31 OV 0.93 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.00* ! LA 0.70 MK 0.92 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.192955Jy sigma=0.000848 ! Fit after self-cal, rms=0.155364Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=29.23 mas, bpa=-12.57 degrees ! Estimated noise=5381.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180327 Jy ! Component: 100 - total flux cleaned = -0.00229474 Jy ! Component: 150 - total flux cleaned = -0.00249098 Jy ! Component: 200 - total flux cleaned = -0.00265778 Jy ! Total flux subtracted in 200 components = -0.00265778 Jy ! Clean residual min=-0.016168 max=0.009071 Jy/beam ! Clean residual mean=0.000201 rms=0.003393 Jy/beam ! Combined flux in latest and established models = 1.14738 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 1.14738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154620Jy sigma=0.000663 ! Fit after self-cal, rms=0.154801Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154801Jy sigma=0.000663 ! Fit after self-cal, rms=0.155223Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=29.25 mas, bpa=-12.58 degrees ! Estimated noise=5376.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000794461 Jy ! Component: 100 - total flux cleaned = -0.00144378 Jy ! Component: 150 - total flux cleaned = -0.0021234 Jy ! Component: 200 - total flux cleaned = -0.00248144 Jy ! Total flux subtracted in 200 components = -0.00248144 Jy ! Clean residual min=-0.015413 max=0.008392 Jy/beam ! Clean residual mean=0.000204 rms=0.003250 Jy/beam ! Combined flux in latest and established models = 1.14489 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 1.14489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154824Jy sigma=0.000661 ! Fit after self-cal, rms=0.154848Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218551 Jy ! Component: 100 - total flux cleaned = -0.000108427 Jy ! Component: 150 - total flux cleaned = -1.03712e-05 Jy ! Component: 200 - total flux cleaned = -1.48791e-05 Jy ! Total flux subtracted in 200 components = -1.48791e-05 Jy ! Clean residual min=-0.015084 max=0.008423 Jy/beam ! Clean residual mean=0.000205 rms=0.003174 Jy/beam ! Combined flux in latest and established models = 1.14488 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 122 components and 1.14488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154640Jy sigma=0.000661 ! Fit after self-cal, rms=0.154655Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154655Jy sigma=0.000661 ! Fit after self-cal, rms=0.155255Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=29.27 mas, bpa=-12.58 degrees ! Estimated noise=5374.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178857 Jy ! Component: 100 - total flux cleaned = -0.00212378 Jy ! Component: 150 - total flux cleaned = -0.00253427 Jy ! Component: 200 - total flux cleaned = -0.002727 Jy ! Total flux subtracted in 200 components = -0.002727 Jy ! Clean residual min=-0.014483 max=0.008338 Jy/beam ! Clean residual mean=0.000195 rms=0.003078 Jy/beam ! Combined flux in latest and established models = 1.14215 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 129 components and 1.14215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155025Jy sigma=0.000660 ! Fit after self-cal, rms=0.155048Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.44606e-06 Jy ! Component: 100 - total flux cleaned = 7.17198e-05 Jy ! Component: 150 - total flux cleaned = 7.03545e-05 Jy ! Component: 200 - total flux cleaned = 0.00014578 Jy ! Total flux subtracted in 200 components = 0.00014578 Jy ! Clean residual min=-0.014216 max=0.008282 Jy/beam ! Clean residual mean=0.000197 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 1.1423 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 133 components and 1.1423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154916Jy sigma=0.000659 ! Fit after self-cal, rms=0.154926Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154926Jy sigma=0.000659 ! Fit after self-cal, rms=0.155366Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.44 mas, bmaj=42.2 mas, bpa=2.794 degrees ! Estimated noise=6350.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000910511 Jy ! Component: 100 - total flux cleaned = -0.000819432 Jy ! Component: 150 - total flux cleaned = -0.00073474 Jy ! Component: 200 - total flux cleaned = -0.000659309 Jy ! Total flux subtracted in 200 components = -0.000659309 Jy ! Clean residual min=-0.014374 max=0.008900 Jy/beam ! Clean residual mean=0.000335 rms=0.003725 Jy/beam ! Combined flux in latest and established models = 1.14164 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 154 components and 1.14164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155255Jy sigma=0.000659 ! Fit after self-cal, rms=0.155269Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.76752e-05 Jy ! Component: 100 - total flux cleaned = 0.000169062 Jy ! Component: 150 - total flux cleaned = 0.000166793 Jy ! Component: 200 - total flux cleaned = 0.000164094 Jy ! Total flux subtracted in 200 components = 0.000164094 Jy ! Clean residual min=-0.014263 max=0.008775 Jy/beam ! Clean residual mean=0.000337 rms=0.003688 Jy/beam ! Combined flux in latest and established models = 1.1418 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 163 components and 1.1418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155183Jy sigma=0.000659 ! Fit after self-cal, rms=0.155190Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=29.28 mas, bpa=-12.58 degrees ! Estimated noise=5371.55 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 29.28 at -12.58 degrees (North through East) ! Clean map min=-0.013785 max=0.82027 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155190Jy sigma=0.000659 ! Fit after self-cal, rms=0.144941Jy sigma=0.000588 ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=29.26 mas, bpa=-12.58 degrees ! Estimated noise=5374.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120346 Jy ! Component: 100 - total flux cleaned = -0.00137069 Jy ! Component: 150 - total flux cleaned = -0.00144669 Jy ! Component: 200 - total flux cleaned = -0.00151491 Jy ! Total flux subtracted in 200 components = -0.00151491 Jy ! Clean residual min=-0.012275 max=0.007910 Jy/beam ! Clean residual mean=0.000099 rms=0.002680 Jy/beam ! Combined flux in latest and established models = 1.14029 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 170 components and 1.14029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144812Jy sigma=0.000588 ! Fit after self-cal, rms=0.144817Jy sigma=0.000588 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.59377e-05 Jy ! Component: 100 - total flux cleaned = 6.26348e-05 Jy ! Component: 150 - total flux cleaned = 5.32106e-06 Jy ! Component: 200 - total flux cleaned = 4.96898e-06 Jy ! Total flux subtracted in 200 components = 4.96898e-06 Jy ! Clean residual min=-0.012106 max=0.007909 Jy/beam ! Clean residual mean=0.000099 rms=0.002659 Jy/beam ! Combined flux in latest and established models = 1.14029 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 173 components and 1.14029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144738Jy sigma=0.000588 ! Fit after self-cal, rms=0.144746Jy sigma=0.000588 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144746Jy sigma=0.000588 ! Fit after self-cal, rms=0.145102Jy sigma=0.000588 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=29.48 mas, bpa=-12.9 degrees ! Estimated noise=6352.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.689437 Jy ! Component: 100 - total flux cleaned = 0.894989 Jy ! Component: 150 - total flux cleaned = 0.996305 Jy ! Component: 200 - total flux cleaned = 1.04895 Jy ! Total flux subtracted in 200 components = 1.04895 Jy ! Clean residual min=-0.015749 max=0.025000 Jy/beam ! Clean residual mean=-0.000351 rms=0.006557 Jy/beam ! Combined flux in latest and established models = 1.04895 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.04895 Jy ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=29.28 mas, bpa=-12.58 degrees ! Estimated noise=5372.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382799 Jy ! Component: 100 - total flux cleaned = 0.055822 Jy ! Component: 150 - total flux cleaned = 0.0653655 Jy ! Component: 200 - total flux cleaned = 0.0714728 Jy ! Total flux subtracted in 200 components = 0.0714728 Jy ! Clean residual min=-0.010196 max=0.008543 Jy/beam ! Clean residual mean=-0.000081 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 1.12043 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 83 components and 1.12042 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.46 mas, bmaj=42.24 mas, bpa=2.825 degrees ! Estimated noise=6342.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372822 Jy ! Component: 100 - total flux cleaned = 0.00413526 Jy ! Component: 150 - total flux cleaned = 0.00447618 Jy ! Component: 200 - total flux cleaned = 0.00478594 Jy ! Total flux subtracted in 200 components = 0.00478594 Jy ! Clean residual min=-0.009163 max=0.006887 Jy/beam ! Clean residual mean=-0.000057 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 1.12521 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021662 Jy ! Component: 100 - total flux cleaned = 0.000418852 Jy ! Component: 150 - total flux cleaned = 0.000610229 Jy ! Component: 200 - total flux cleaned = 0.00073551 Jy ! Total flux subtracted in 200 components = 0.00073551 Jy ! Clean residual min=-0.008943 max=0.006883 Jy/beam ! Clean residual mean=-0.000046 rms=0.003020 Jy/beam ! Combined flux in latest and established models = 1.12595 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 137 components and 1.12595 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=29.28 mas, bpa=-12.58 degrees ! Estimated noise=5372.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117672 Jy ! Component: 100 - total flux cleaned = 0.00136233 Jy ! Component: 150 - total flux cleaned = 0.00153128 Jy ! Component: 200 - total flux cleaned = 0.00161124 Jy ! Total flux subtracted in 200 components = 0.00161124 Jy ! Clean residual min=-0.010589 max=0.008501 Jy/beam ! Clean residual mean=-0.000015 rms=0.002518 Jy/beam ! Combined flux in latest and established models = 1.12756 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 152 components and 1.12756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145227Jy sigma=0.000588 ! Fit after self-cal, rms=0.145212Jy sigma=0.000588 wmodel J0406-3826_S_2017_05_27_pus_map.mod ! Writing 152 model components to file: J0406-3826_S_2017_05_27_pus_map.mod wobs J0406-3826_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0406-3826_S_2017_05_27_pus_uvs.fits wwins J0406-3826_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0406-3826_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00250719 Jy ! Component: 100 - total flux cleaned = -0.00365346 Jy ! Component: 150 - total flux cleaned = -0.00445311 Jy ! Component: 200 - total flux cleaned = -0.00457621 Jy ! Component: 250 - total flux cleaned = -0.00480566 Jy ! Component: 300 - total flux cleaned = -0.00502353 Jy ! Component: 350 - total flux cleaned = -0.00523213 Jy ! Component: 400 - total flux cleaned = -0.00552693 Jy ! Component: 450 - total flux cleaned = -0.00600447 Jy ! Component: 500 - total flux cleaned = -0.00628079 Jy ! Component: 550 - total flux cleaned = -0.00654775 Jy ! Component: 600 - total flux cleaned = -0.00671832 Jy ! Component: 650 - total flux cleaned = -0.0069668 Jy ! Component: 700 - total flux cleaned = -0.00696555 Jy ! Component: 750 - total flux cleaned = -0.00720066 Jy ! Component: 800 - total flux cleaned = -0.00735222 Jy ! Component: 850 - total flux cleaned = -0.00772209 Jy ! Component: 900 - total flux cleaned = -0.00793841 Jy ! Component: 950 - total flux cleaned = -0.00815023 Jy ! Component: 1000 - total flux cleaned = -0.00842644 Jy ! Component: 1050 - total flux cleaned = -0.00862823 Jy ! Component: 1100 - total flux cleaned = -0.00876032 Jy ! Component: 1150 - total flux cleaned = -0.00882475 Jy ! Component: 1200 - total flux cleaned = -0.00901596 Jy ! Component: 1250 - total flux cleaned = -0.00920429 Jy ! Component: 1300 - total flux cleaned = -0.00932827 Jy ! Component: 1350 - total flux cleaned = -0.00957338 Jy ! Component: 1400 - total flux cleaned = -0.00975511 Jy ! Component: 1450 - total flux cleaned = -0.0100542 Jy ! Component: 1500 - total flux cleaned = -0.0101138 Jy ! Component: 1550 - total flux cleaned = -0.010173 Jy ! Component: 1600 - total flux cleaned = -0.010405 Jy ! Component: 1650 - total flux cleaned = -0.0105194 Jy ! Component: 1700 - total flux cleaned = -0.0110305 Jy ! Component: 1750 - total flux cleaned = -0.011482 Jy ! Component: 1800 - total flux cleaned = -0.0119858 Jy ! Component: 1850 - total flux cleaned = -0.0124313 Jy ! Component: 1900 - total flux cleaned = -0.0129848 Jy ! Component: 1950 - total flux cleaned = -0.0134805 Jy ! Component: 2000 - total flux cleaned = -0.013974 Jy ! Component: 2050 - total flux cleaned = -0.0146278 Jy ! Component: 2100 - total flux cleaned = -0.015225 Jy ! Component: 2150 - total flux cleaned = -0.0157673 Jy ! Component: 2200 - total flux cleaned = -0.0164177 Jy ! Component: 2250 - total flux cleaned = -0.0170134 Jy ! Component: 2300 - total flux cleaned = -0.0177172 Jy ! Component: 2350 - total flux cleaned = -0.0182586 Jy ! Component: 2400 - total flux cleaned = -0.018908 Jy ! Component: 2450 - total flux cleaned = -0.0194497 Jy ! Component: 2500 - total flux cleaned = -0.0199381 Jy ! Component: 2550 - total flux cleaned = -0.0203188 Jy ! Component: 2600 - total flux cleaned = -0.0208083 Jy ! Component: 2650 - total flux cleaned = -0.0212445 Jy ! Component: 2700 - total flux cleaned = -0.021737 Jy ! Component: 2750 - total flux cleaned = -0.0221757 Jy ! Component: 2800 - total flux cleaned = -0.0226708 Jy ! Component: 2850 - total flux cleaned = -0.0230568 Jy ! Component: 2900 - total flux cleaned = -0.0236098 Jy ! Component: 2950 - total flux cleaned = -0.0239986 Jy ! Component: 3000 - total flux cleaned = -0.0245558 Jy ! Component: 3050 - total flux cleaned = -0.0251153 Jy ! Component: 3100 - total flux cleaned = -0.0255085 Jy ! Component: 3150 - total flux cleaned = -0.0257919 Jy ! Component: 3200 - total flux cleaned = -0.0260763 Jy ! Component: 3250 - total flux cleaned = -0.0263625 Jy ! Component: 3300 - total flux cleaned = -0.0266507 Jy ! Component: 3350 - total flux cleaned = -0.0269993 Jy ! Component: 3400 - total flux cleaned = -0.0274092 Jy ! Component: 3450 - total flux cleaned = -0.0277048 Jy ! Component: 3500 - total flux cleaned = -0.0281221 Jy ! Component: 3550 - total flux cleaned = -0.0284826 Jy ! Component: 3600 - total flux cleaned = -0.0287254 Jy ! Component: 3650 - total flux cleaned = -0.0290921 Jy ! Component: 3700 - total flux cleaned = -0.0294003 Jy ! Component: 3750 - total flux cleaned = -0.0298357 Jy ! Component: 3800 - total flux cleaned = -0.0300873 Jy ! Component: 3850 - total flux cleaned = -0.0304671 Jy ! Component: 3900 - total flux cleaned = -0.0308505 Jy ! Component: 3950 - total flux cleaned = -0.0313032 Jy ! Component: 4000 - total flux cleaned = -0.0316298 Jy ! Component: 4050 - total flux cleaned = -0.0320918 Jy ! Total flux subtracted in 4096 components = -0.0324249 Jy ! Clean residual min=-0.004486 max=0.003872 Jy/beam ! Clean residual mean=-0.000098 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 1.09513 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 376 components and 1.09513 Jy ![Exited script file: muppet] wmap "J0406-3826_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 29.28 at -12.58 degrees (North through East) ! Clean map min=-0.013152 max=0.86991 Jy/beam ! Writing clean map to FITS file: J0406-3826_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.869906 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00124223 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.428403 0.428403 0.856806 1.71361 3.42722 6.85445 13.7089 27.4178 54.8356 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.869 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 29.28 at -12.58 degrees (North through East) ! Clean map min=-0.013152 max=0.86991 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-3826_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:56:50 2019