! Started logfile: J0406-3826_S_2017_05_01_pus_uvs.log on Wed May 1 18:26:57 2019 obs J0406-3826_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0406-3826_S_2017_05_01_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.591453 visibilities/baseline/integration-bin. ! Found source: J0406-3826 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-3826_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.363114Jy sigma=0.001495 ! Fit after self-cal, rms=0.350606Jy sigma=0.001433 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=6.883 mas, bpa=6.824 degrees ! Estimated noise=5569.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.679804 Jy ! Component: 100 - total flux cleaned = 0.894629 Jy ! Total flux subtracted in 100 components = 0.894629 Jy ! Clean residual min=-0.054828 max=0.091590 Jy/beam ! Clean residual mean=-0.001384 rms=0.019773 Jy/beam ! Combined flux in latest and established models = 0.89463 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.89463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315966Jy sigma=0.001305 ! Fit after self-cal, rms=0.315758Jy sigma=0.001303 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=8.051 mas, bpa=6.506 degrees ! Estimated noise=4410.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133716 Jy ! Component: 100 - total flux cleaned = 0.192641 Jy ! Component: 150 - total flux cleaned = 0.221226 Jy ! Component: 200 - total flux cleaned = 0.23551 Jy ! Total flux subtracted in 200 components = 0.23551 Jy ! Clean residual min=-0.041668 max=0.055816 Jy/beam ! Clean residual mean=-0.001866 rms=0.014530 Jy/beam ! Combined flux in latest and established models = 1.13014 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 1.13014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264901Jy sigma=0.000932 ! Fit after self-cal, rms=0.264898Jy sigma=0.000932 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 1.05 ! LA 1.00 MK 1.03 NL 1.18 OV 1.05 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 0.98 ! LA 0.95 MK 0.98 NL 1.38 OV 1.03 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.00 ! LA 0.98 MK 1.04 NL 1.37 OV 0.96 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.00* ! LA 0.50 MK 1.00 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.264898Jy sigma=0.000932 ! Fit after self-cal, rms=0.168496Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=8.065 mas, bpa=6.562 degrees ! Estimated noise=4411.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143076 Jy ! Component: 100 - total flux cleaned = -0.00156494 Jy ! Component: 150 - total flux cleaned = -0.00168728 Jy ! Component: 200 - total flux cleaned = -0.00180132 Jy ! Total flux subtracted in 200 components = -0.00180132 Jy ! Clean residual min=-0.012706 max=0.010595 Jy/beam ! Clean residual mean=-0.000270 rms=0.003202 Jy/beam ! Combined flux in latest and established models = 1.12834 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 1.12834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168230Jy sigma=0.000655 ! Fit after self-cal, rms=0.168506Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168506Jy sigma=0.000654 ! Fit after self-cal, rms=0.168476Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=8.065 mas, bpa=6.483 degrees ! Estimated noise=4406.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151773 Jy ! Component: 100 - total flux cleaned = -0.00162571 Jy ! Component: 150 - total flux cleaned = -0.00162449 Jy ! Component: 200 - total flux cleaned = -0.00172077 Jy ! Total flux subtracted in 200 components = -0.00172077 Jy ! Clean residual min=-0.012858 max=0.010179 Jy/beam ! Clean residual mean=-0.000270 rms=0.003149 Jy/beam ! Combined flux in latest and established models = 1.12662 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 1.12662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168280Jy sigma=0.000654 ! Fit after self-cal, rms=0.168266Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10442e-05 Jy ! Component: 100 - total flux cleaned = -8.483e-05 Jy ! Component: 150 - total flux cleaned = -0.000176668 Jy ! Component: 200 - total flux cleaned = -0.000175567 Jy ! Total flux subtracted in 200 components = -0.000175567 Jy ! Clean residual min=-0.012918 max=0.010019 Jy/beam ! Clean residual mean=-0.000272 rms=0.003116 Jy/beam ! Combined flux in latest and established models = 1.12644 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 1.12644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168145Jy sigma=0.000653 ! Fit after self-cal, rms=0.168134Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168134Jy sigma=0.000653 ! Fit after self-cal, rms=0.168067Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=8.065 mas, bpa=6.421 degrees ! Estimated noise=4400.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156889 Jy ! Component: 100 - total flux cleaned = -0.00164979 Jy ! Component: 150 - total flux cleaned = -0.00165079 Jy ! Component: 200 - total flux cleaned = -0.00165277 Jy ! Total flux subtracted in 200 components = -0.00165277 Jy ! Clean residual min=-0.013008 max=0.009776 Jy/beam ! Clean residual mean=-0.000271 rms=0.003079 Jy/beam ! Combined flux in latest and established models = 1.12479 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 1.12479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167934Jy sigma=0.000653 ! Fit after self-cal, rms=0.167928Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.6702e-05 Jy ! Component: 100 - total flux cleaned = -0.000153435 Jy ! Component: 150 - total flux cleaned = -0.000226272 Jy ! Component: 200 - total flux cleaned = -0.000228176 Jy ! Total flux subtracted in 200 components = -0.000228176 Jy ! Clean residual min=-0.013064 max=0.009671 Jy/beam ! Clean residual mean=-0.000273 rms=0.003059 Jy/beam ! Combined flux in latest and established models = 1.12456 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 1.12456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167844Jy sigma=0.000653 ! Fit after self-cal, rms=0.167837Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167837Jy sigma=0.000653 ! Fit after self-cal, rms=0.167816Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.554 mas, bmaj=30.6 mas, bpa=10.04 degrees ! Estimated noise=5587.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000575399 Jy ! Component: 100 - total flux cleaned = -0.000572856 Jy ! Component: 150 - total flux cleaned = -0.000573684 Jy ! Component: 200 - total flux cleaned = -0.00057354 Jy ! Total flux subtracted in 200 components = -0.00057354 Jy ! Clean residual min=-0.011581 max=0.012416 Jy/beam ! Clean residual mean=-0.000520 rms=0.004293 Jy/beam ! Combined flux in latest and established models = 1.12399 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 48 components and 1.12399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167775Jy sigma=0.000653 ! Fit after self-cal, rms=0.167750Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.35553e-05 Jy ! Component: 100 - total flux cleaned = -5.39431e-05 Jy ! Component: 150 - total flux cleaned = -5.52775e-05 Jy ! Component: 200 - total flux cleaned = -5.59862e-05 Jy ! Total flux subtracted in 200 components = -5.59862e-05 Jy ! Clean residual min=-0.011565 max=0.012413 Jy/beam ! Clean residual mean=-0.000520 rms=0.004292 Jy/beam ! Combined flux in latest and established models = 1.12393 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 49 components and 1.12393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167731Jy sigma=0.000653 ! Fit after self-cal, rms=0.167710Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=8.066 mas, bpa=6.375 degrees ! Estimated noise=4396.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 8.066 at 6.375 degrees (North through East) ! Clean map min=-0.012509 max=0.90934 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167710Jy sigma=0.000653 ! Fit after self-cal, rms=0.157873Jy sigma=0.000602 ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=8.069 mas, bpa=6.262 degrees ! Estimated noise=4396.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159998 Jy ! Component: 100 - total flux cleaned = -0.00172683 Jy ! Component: 150 - total flux cleaned = -0.00178638 Jy ! Component: 200 - total flux cleaned = -0.00184111 Jy ! Total flux subtracted in 200 components = -0.00184111 Jy ! Clean residual min=-0.013113 max=0.009573 Jy/beam ! Clean residual mean=-0.000292 rms=0.003002 Jy/beam ! Combined flux in latest and established models = 1.12209 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 1.12209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157774Jy sigma=0.000602 ! Fit after self-cal, rms=0.157772Jy sigma=0.000602 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.63375e-05 Jy ! Component: 100 - total flux cleaned = -0.000109294 Jy ! Component: 150 - total flux cleaned = -0.000108339 Jy ! Component: 200 - total flux cleaned = -0.000159426 Jy ! Total flux subtracted in 200 components = -0.000159426 Jy ! Clean residual min=-0.013152 max=0.009511 Jy/beam ! Clean residual mean=-0.000293 rms=0.002992 Jy/beam ! Combined flux in latest and established models = 1.12193 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 51 components and 1.12193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157715Jy sigma=0.000602 ! Fit after self-cal, rms=0.157716Jy sigma=0.000602 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157716Jy sigma=0.000602 ! Fit after self-cal, rms=0.157768Jy sigma=0.000601 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=6.867 mas, bpa=6.607 degrees ! Estimated noise=5597.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.684009 Jy ! Component: 100 - total flux cleaned = 0.903299 Jy ! Component: 150 - total flux cleaned = 1.00278 Jy ! Component: 200 - total flux cleaned = 1.05543 Jy ! Total flux subtracted in 200 components = 1.05543 Jy ! Clean residual min=-0.017838 max=0.025846 Jy/beam ! Clean residual mean=-0.000341 rms=0.005658 Jy/beam ! Combined flux in latest and established models = 1.05543 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.05543 Jy ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=8.073 mas, bpa=6.243 degrees ! Estimated noise=4394.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365046 Jy ! Component: 100 - total flux cleaned = 0.052565 Jy ! Component: 150 - total flux cleaned = 0.0600596 Jy ! Component: 200 - total flux cleaned = 0.0635876 Jy ! Total flux subtracted in 200 components = 0.0635876 Jy ! Clean residual min=-0.013035 max=0.010315 Jy/beam ! Clean residual mean=-0.000301 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 1.11902 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 1.11902 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.559 mas, bmaj=30.62 mas, bpa=9.97 degrees ! Estimated noise=5578.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158896 Jy ! Component: 100 - total flux cleaned = 0.00158556 Jy ! Component: 150 - total flux cleaned = 0.00158426 Jy ! Component: 200 - total flux cleaned = 0.00161985 Jy ! Total flux subtracted in 200 components = 0.00161985 Jy ! Clean residual min=-0.011296 max=0.011963 Jy/beam ! Clean residual mean=-0.000569 rms=0.004262 Jy/beam ! Combined flux in latest and established models = 1.12064 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.14994e-05 Jy ! Component: 100 - total flux cleaned = 6.19474e-05 Jy ! Component: 150 - total flux cleaned = 9.1759e-05 Jy ! Component: 200 - total flux cleaned = 0.000119375 Jy ! Total flux subtracted in 200 components = 0.000119375 Jy ! Clean residual min=-0.011266 max=0.011955 Jy/beam ! Clean residual mean=-0.000567 rms=0.004256 Jy/beam ! Combined flux in latest and established models = 1.12076 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 38 components and 1.12076 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=8.073 mas, bpa=6.243 degrees ! Estimated noise=4394.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143463 Jy ! Component: 100 - total flux cleaned = -0.00014568 Jy ! Component: 150 - total flux cleaned = -0.000234132 Jy ! Component: 200 - total flux cleaned = -0.000316966 Jy ! Total flux subtracted in 200 components = -0.000316966 Jy ! Clean residual min=-0.012983 max=0.010167 Jy/beam ! Clean residual mean=-0.000290 rms=0.003080 Jy/beam ! Combined flux in latest and established models = 1.12044 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 1.12044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157887Jy sigma=0.000603 ! Fit after self-cal, rms=0.157762Jy sigma=0.000603 wmodel J0406-3826_S_2017_05_01_pus_map.mod ! Writing 45 model components to file: J0406-3826_S_2017_05_01_pus_map.mod wobs J0406-3826_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0406-3826_S_2017_05_01_pus_uvs.fits wwins J0406-3826_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J0406-3826_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00241623 Jy ! Component: 100 - total flux cleaned = -0.00204672 Jy ! Component: 150 - total flux cleaned = -0.00204494 Jy ! Component: 200 - total flux cleaned = -0.00147089 Jy ! Component: 250 - total flux cleaned = -0.00172783 Jy ! Component: 300 - total flux cleaned = -0.00259986 Jy ! Component: 350 - total flux cleaned = -0.00365909 Jy ! Component: 400 - total flux cleaned = -0.00443436 Jy ! Component: 450 - total flux cleaned = -0.0045407 Jy ! Component: 500 - total flux cleaned = -0.00443981 Jy ! Component: 550 - total flux cleaned = -0.00443895 Jy ! Component: 600 - total flux cleaned = -0.00434396 Jy ! Component: 650 - total flux cleaned = -0.00425423 Jy ! Component: 700 - total flux cleaned = -0.00442658 Jy ! Component: 750 - total flux cleaned = -0.00425552 Jy ! Component: 800 - total flux cleaned = -0.00449876 Jy ! Component: 850 - total flux cleaned = -0.00457782 Jy ! Component: 900 - total flux cleaned = -0.00480909 Jy ! Component: 950 - total flux cleaned = -0.00503372 Jy ! Component: 1000 - total flux cleaned = -0.00555013 Jy ! Component: 1050 - total flux cleaned = -0.00605579 Jy ! Component: 1100 - total flux cleaned = -0.00648077 Jy ! Component: 1150 - total flux cleaned = -0.00682885 Jy ! Component: 1200 - total flux cleaned = -0.00710255 Jy ! Component: 1250 - total flux cleaned = -0.00716995 Jy ! Component: 1300 - total flux cleaned = -0.00730318 Jy ! Component: 1350 - total flux cleaned = -0.00762964 Jy ! Component: 1400 - total flux cleaned = -0.00795133 Jy ! Component: 1450 - total flux cleaned = -0.0081419 Jy ! Component: 1500 - total flux cleaned = -0.00839394 Jy ! Component: 1550 - total flux cleaned = -0.00876729 Jy ! Component: 1600 - total flux cleaned = -0.0089521 Jy ! Component: 1650 - total flux cleaned = -0.0091966 Jy ! Component: 1700 - total flux cleaned = -0.00937845 Jy ! Component: 1750 - total flux cleaned = -0.0096191 Jy ! Component: 1800 - total flux cleaned = -0.00973837 Jy ! Component: 1850 - total flux cleaned = -0.00991627 Jy ! Component: 1900 - total flux cleaned = -0.0100934 Jy ! Component: 1950 - total flux cleaned = -0.0103281 Jy ! Component: 2000 - total flux cleaned = -0.0105027 Jy ! Component: 2050 - total flux cleaned = -0.0107343 Jy ! Component: 2100 - total flux cleaned = -0.0109073 Jy ! Component: 2150 - total flux cleaned = -0.0111374 Jy ! Component: 2200 - total flux cleaned = -0.0112514 Jy ! Component: 2250 - total flux cleaned = -0.0114789 Jy ! Component: 2300 - total flux cleaned = -0.0117627 Jy ! Component: 2350 - total flux cleaned = -0.0119327 Jy ! Component: 2400 - total flux cleaned = -0.0121019 Jy ! Component: 2450 - total flux cleaned = -0.012158 Jy ! Component: 2500 - total flux cleaned = -0.0121016 Jy ! Component: 2550 - total flux cleaned = -0.0119888 Jy ! Component: 2600 - total flux cleaned = -0.0119327 Jy ! Component: 2650 - total flux cleaned = -0.0119326 Jy ! Component: 2700 - total flux cleaned = -0.0119325 Jy ! Component: 2750 - total flux cleaned = -0.0119886 Jy ! Component: 2800 - total flux cleaned = -0.0119322 Jy ! Component: 2850 - total flux cleaned = -0.012045 Jy ! Component: 2900 - total flux cleaned = -0.0119884 Jy ! Component: 2950 - total flux cleaned = -0.0119881 Jy ! Component: 3000 - total flux cleaned = -0.0121017 Jy ! Component: 3050 - total flux cleaned = -0.0122727 Jy ! Component: 3100 - total flux cleaned = -0.0124445 Jy ! Component: 3150 - total flux cleaned = -0.0127329 Jy ! Component: 3200 - total flux cleaned = -0.0131398 Jy ! Component: 3250 - total flux cleaned = -0.0133744 Jy ! Component: 3300 - total flux cleaned = -0.0134914 Jy ! Component: 3350 - total flux cleaned = -0.0138478 Jy ! Component: 3400 - total flux cleaned = -0.0140867 Jy ! Component: 3450 - total flux cleaned = -0.0143878 Jy ! Component: 3500 - total flux cleaned = -0.0146919 Jy ! Component: 3550 - total flux cleaned = -0.0149983 Jy ! Component: 3600 - total flux cleaned = -0.0153685 Jy ! Component: 3650 - total flux cleaned = -0.015555 Jy ! Component: 3700 - total flux cleaned = -0.0159318 Jy ! Component: 3750 - total flux cleaned = -0.0162491 Jy ! Component: 3800 - total flux cleaned = -0.0166328 Jy ! Component: 3850 - total flux cleaned = -0.016891 Jy ! Component: 3900 - total flux cleaned = -0.0171515 Jy ! Component: 3950 - total flux cleaned = -0.0174811 Jy ! Component: 4000 - total flux cleaned = -0.0178141 Jy ! Component: 4050 - total flux cleaned = -0.0178807 Jy ! Total flux subtracted in 4096 components = -0.018219 Jy ! Clean residual min=-0.004329 max=0.004922 Jy/beam ! Clean residual mean=-0.000006 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 1.10222 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 287 components and 1.10222 Jy ![Exited script file: muppet] wmap "J0406-3826_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.957 x 8.073 at 6.243 degrees (North through East) ! Clean map min=-0.0077606 max=0.91352 Jy/beam ! Writing clean map to FITS file: J0406-3826_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.913516 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00132196 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.434133 0.434133 0.868266 1.73653 3.47306 6.94613 13.8923 27.7845 55.569 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.913 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.957 x 8.073 at 6.243 degrees (North through East) ! Clean map min=-0.0077606 max=0.91352 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-3826_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:27:02 2019