! Started logfile: J0406-3826_S_2017_04_28_pus_uvs.log on Thu May 2 16:16:04 2019 obs J0406-3826_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0406-3826_S_2017_04_28_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.553086 visibilities/baseline/integration-bin. ! Found source: J0406-3826 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-3826_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.382669Jy sigma=0.013384 ! Fit after self-cal, rms=0.371081Jy sigma=0.013149 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.441 mas, bmaj=6.846 mas, bpa=-8.774 degrees ! Estimated noise=3978.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.490502 Jy ! Component: 100 - total flux cleaned = 0.667491 Jy ! Total flux subtracted in 100 components = 0.667491 Jy ! Clean residual min=-0.111165 max=0.137608 Jy/beam ! Clean residual mean=0.001260 rms=0.039353 Jy/beam ! Combined flux in latest and established models = 0.66749 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.66749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339097Jy sigma=0.007872 ! Fit after self-cal, rms=0.338968Jy sigma=0.007872 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=9.037 mas, bpa=-5.676 degrees ! Estimated noise=3200.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0185483 Jy ! Component: 100 - total flux cleaned = -0.019564 Jy ! Component: 150 - total flux cleaned = -0.0204414 Jy ! Component: 200 - total flux cleaned = -0.0224955 Jy ! Total flux subtracted in 200 components = -0.0224955 Jy ! Clean residual min=-0.154021 max=0.182127 Jy/beam ! Clean residual mean=0.004148 rms=0.065905 Jy/beam ! Combined flux in latest and established models = 0.644995 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.644995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340391Jy sigma=0.007655 ! Fit after self-cal, rms=0.340386Jy sigma=0.007655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.73 HN 1.61 KP 0.79 ! LA 0.95 MK 0.67 NL 0.91 OV 0.80 ! PT 0.86 SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.67 HN 1.66 KP 0.76 ! LA 0.95 MK 0.67 NL 1.09 OV 0.81 ! PT 0.83 SC 1.20 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.71 HN 1.59 KP 0.78 ! LA 0.82 MK 0.67 NL 1.01 OV 0.73 ! PT 0.81 SC 1.21 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.74 HN 2.09 KP 1.00* ! LA 34.37 MK 0.67 NL 1.00* OV 1.00* ! PT 0.85 SC 1.00* ! ! ! Fit before self-cal, rms=0.340386Jy sigma=0.007655 ! Fit after self-cal, rms=4.748698Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=9.218 mas, bpa=-4.104 degrees ! Estimated noise=3204.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128155 Jy ! Component: 100 - total flux cleaned = 0.0132911 Jy ! Component: 150 - total flux cleaned = 0.0132824 Jy ! Component: 200 - total flux cleaned = 0.0137111 Jy ! Total flux subtracted in 200 components = 0.0137111 Jy ! Clean residual min=-0.014266 max=0.015332 Jy/beam ! Clean residual mean=0.000029 rms=0.003941 Jy/beam ! Combined flux in latest and established models = 0.658706 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.658706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.748790Jy sigma=0.000730 ! Fit after self-cal, rms=4.749823Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.749823Jy sigma=0.000719 ! Fit after self-cal, rms=4.830643Jy sigma=0.000717 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=9.179 mas, bpa=-4.077 degrees ! Estimated noise=3210.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00939932 Jy ! Component: 100 - total flux cleaned = 0.0100563 Jy ! Component: 150 - total flux cleaned = 0.0106534 Jy ! Component: 200 - total flux cleaned = 0.0109335 Jy ! Total flux subtracted in 200 components = 0.0109335 Jy ! Clean residual min=-0.013570 max=0.012903 Jy/beam ! Clean residual mean=0.000017 rms=0.003701 Jy/beam ! Combined flux in latest and established models = 0.66964 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.66964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.830051Jy sigma=0.000710 ! Fit after self-cal, rms=4.830109Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176153 Jy ! Component: 100 - total flux cleaned = 0.00177675 Jy ! Component: 150 - total flux cleaned = 0.00201125 Jy ! Component: 200 - total flux cleaned = 0.00245678 Jy ! Total flux subtracted in 200 components = 0.00245678 Jy ! Clean residual min=-0.013137 max=0.012446 Jy/beam ! Clean residual mean=0.000015 rms=0.003600 Jy/beam ! Combined flux in latest and established models = 0.672096 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.672096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.829818Jy sigma=0.000706 ! Fit after self-cal, rms=4.829903Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.829903Jy sigma=0.000706 ! Fit after self-cal, rms=4.848174Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=9.155 mas, bpa=-4.025 degrees ! Estimated noise=3226.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814351 Jy ! Component: 100 - total flux cleaned = 0.00918237 Jy ! Component: 150 - total flux cleaned = 0.0095658 Jy ! Component: 200 - total flux cleaned = 0.00992362 Jy ! Total flux subtracted in 200 components = 0.00992362 Jy ! Clean residual min=-0.012332 max=0.012199 Jy/beam ! Clean residual mean=0.000016 rms=0.003386 Jy/beam ! Combined flux in latest and established models = 0.68202 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.68202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.847519Jy sigma=0.000693 ! Fit after self-cal, rms=4.847900Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670147 Jy ! Component: 100 - total flux cleaned = 0.00066904 Jy ! Component: 150 - total flux cleaned = 0.000826601 Jy ! Component: 200 - total flux cleaned = 0.000984466 Jy ! Total flux subtracted in 200 components = 0.000984466 Jy ! Clean residual min=-0.012143 max=0.012019 Jy/beam ! Clean residual mean=0.000016 rms=0.003341 Jy/beam ! Combined flux in latest and established models = 0.683004 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.683004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.847787Jy sigma=0.000691 ! Fit after self-cal, rms=4.847857Jy sigma=0.000691 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.847857Jy sigma=0.000691 ! Fit after self-cal, rms=4.863364Jy sigma=0.000690 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.744 mas, bmaj=30.8 mas, bpa=-2.579 degrees ! Estimated noise=3931.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00854677 Jy ! Component: 100 - total flux cleaned = 0.0113821 Jy ! Component: 150 - total flux cleaned = 0.0115099 Jy ! Component: 200 - total flux cleaned = 0.0116354 Jy ! Total flux subtracted in 200 components = 0.0116354 Jy ! Clean residual min=-0.014518 max=0.015266 Jy/beam ! Clean residual mean=0.000034 rms=0.005001 Jy/beam ! Combined flux in latest and established models = 0.69464 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 74 components and 0.69464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.862523Jy sigma=0.000691 ! Fit after self-cal, rms=4.862801Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564596 Jy ! Component: 100 - total flux cleaned = 0.000680724 Jy ! Component: 150 - total flux cleaned = 0.000683602 Jy ! Component: 200 - total flux cleaned = 0.000692621 Jy ! Total flux subtracted in 200 components = 0.000692621 Jy ! Clean residual min=-0.014336 max=0.015150 Jy/beam ! Clean residual mean=0.000033 rms=0.004969 Jy/beam ! Combined flux in latest and established models = 0.695332 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 77 components and 0.695332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.862805Jy sigma=0.000691 ! Fit after self-cal, rms=4.862800Jy sigma=0.000691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=9.129 mas, bpa=-4.027 degrees ! Estimated noise=3244.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.237 x 9.129 at -4.027 degrees (North through East) ! Clean map min=-0.024131 max=0.61777 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.862800Jy sigma=0.000691 ! Fit after self-cal, rms=0.210151Jy sigma=0.000596 ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=9.126 mas, bpa=-4.27 degrees ! Estimated noise=3246.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00308557 Jy ! Component: 100 - total flux cleaned = -0.0039254 Jy ! Component: 150 - total flux cleaned = -0.00451207 Jy ! Component: 200 - total flux cleaned = -0.00478574 Jy ! Total flux subtracted in 200 components = -0.00478574 Jy ! Clean residual min=-0.008377 max=0.009590 Jy/beam ! Clean residual mean=0.000002 rms=0.002354 Jy/beam ! Combined flux in latest and established models = 0.690547 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.690547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209746Jy sigma=0.000594 ! Fit after self-cal, rms=0.209755Jy sigma=0.000593 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475454 Jy ! Component: 100 - total flux cleaned = -0.00113504 Jy ! Component: 150 - total flux cleaned = -0.00113751 Jy ! Component: 200 - total flux cleaned = -0.00125118 Jy ! Total flux subtracted in 200 components = -0.00125118 Jy ! Clean residual min=-0.008248 max=0.009157 Jy/beam ! Clean residual mean=0.000002 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.689296 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.689296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209478Jy sigma=0.000592 ! Fit after self-cal, rms=0.209488Jy sigma=0.000592 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209488Jy sigma=0.000592 ! Fit after self-cal, rms=0.206948Jy sigma=0.000592 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=7.227 mas, bpa=-5.969 degrees ! Estimated noise=3846.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.460987 Jy ! Component: 100 - total flux cleaned = 0.614075 Jy ! Component: 150 - total flux cleaned = 0.648135 Jy ! Component: 200 - total flux cleaned = 0.654136 Jy ! Total flux subtracted in 200 components = 0.654136 Jy ! Clean residual min=-0.023905 max=0.023222 Jy/beam ! Clean residual mean=0.000030 rms=0.004917 Jy/beam ! Combined flux in latest and established models = 0.654136 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.654136 Jy ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=9.127 mas, bpa=-4.262 degrees ! Estimated noise=3243.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215352 Jy ! Component: 100 - total flux cleaned = 0.0259244 Jy ! Component: 150 - total flux cleaned = 0.0283079 Jy ! Component: 200 - total flux cleaned = 0.0302868 Jy ! Total flux subtracted in 200 components = 0.0302868 Jy ! Clean residual min=-0.012758 max=0.010462 Jy/beam ! Clean residual mean=0.000011 rms=0.002897 Jy/beam ! Combined flux in latest and established models = 0.684423 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.684423 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.758 mas, bmaj=30.78 mas, bpa=-2.625 degrees ! Estimated noise=3929.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600754 Jy ! Component: 100 - total flux cleaned = 0.0064031 Jy ! Component: 150 - total flux cleaned = 0.00677504 Jy ! Component: 200 - total flux cleaned = 0.00711615 Jy ! Total flux subtracted in 200 components = 0.00711615 Jy ! Clean residual min=-0.008904 max=0.010571 Jy/beam ! Clean residual mean=0.000009 rms=0.002957 Jy/beam ! Combined flux in latest and established models = 0.691539 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.34177e-05 Jy ! Component: 100 - total flux cleaned = 0.000133295 Jy ! Component: 150 - total flux cleaned = 0.000291136 Jy ! Component: 200 - total flux cleaned = 0.000300823 Jy ! Total flux subtracted in 200 components = 0.000300823 Jy ! Clean residual min=-0.008706 max=0.010503 Jy/beam ! Clean residual mean=0.000009 rms=0.002930 Jy/beam ! Combined flux in latest and established models = 0.69184 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.69184 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=9.127 mas, bpa=-4.262 degrees ! Estimated noise=3243.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123912 Jy ! Component: 100 - total flux cleaned = -0.000961902 Jy ! Component: 150 - total flux cleaned = -0.000973319 Jy ! Component: 200 - total flux cleaned = -0.00120372 Jy ! Total flux subtracted in 200 components = -0.00120372 Jy ! Clean residual min=-0.010134 max=0.009432 Jy/beam ! Clean residual mean=0.000005 rms=0.002488 Jy/beam ! Combined flux in latest and established models = 0.690636 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.690636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209003Jy sigma=0.000598 ! Fit after self-cal, rms=0.208863Jy sigma=0.000597 wmodel J0406-3826_S_2017_04_28_pus_map.mod ! Writing 67 model components to file: J0406-3826_S_2017_04_28_pus_map.mod wobs J0406-3826_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0406-3826_S_2017_04_28_pus_uvs.fits wwins J0406-3826_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0406-3826_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.81796e-05 Jy ! Component: 100 - total flux cleaned = 0.000894665 Jy ! Component: 150 - total flux cleaned = 0.000901931 Jy ! Component: 200 - total flux cleaned = 0.000218077 Jy ! Component: 250 - total flux cleaned = -0.000565559 Jy ! Component: 300 - total flux cleaned = -0.00131608 Jy ! Component: 350 - total flux cleaned = -0.00167628 Jy ! Component: 400 - total flux cleaned = -0.00191116 Jy ! Component: 450 - total flux cleaned = -0.00236065 Jy ! Component: 500 - total flux cleaned = -0.00312634 Jy ! Component: 550 - total flux cleaned = -0.0036594 Jy ! Component: 600 - total flux cleaned = -0.00397139 Jy ! Component: 650 - total flux cleaned = -0.00438038 Jy ! Component: 700 - total flux cleaned = -0.00518224 Jy ! Component: 750 - total flux cleaned = -0.00586989 Jy ! Component: 800 - total flux cleaned = -0.00635251 Jy ! Component: 850 - total flux cleaned = -0.00692331 Jy ! Component: 900 - total flux cleaned = -0.00748336 Jy ! Component: 950 - total flux cleaned = -0.00784978 Jy ! Component: 1000 - total flux cleaned = -0.00775906 Jy ! Component: 1050 - total flux cleaned = -0.0079371 Jy ! Component: 1100 - total flux cleaned = -0.00811209 Jy ! Component: 1150 - total flux cleaned = -0.00793893 Jy ! Component: 1200 - total flux cleaned = -0.00802363 Jy ! Component: 1250 - total flux cleaned = -0.00777246 Jy ! Component: 1300 - total flux cleaned = -0.00768894 Jy ! Component: 1350 - total flux cleaned = -0.00776993 Jy ! Component: 1400 - total flux cleaned = -0.00768749 Jy ! Component: 1450 - total flux cleaned = -0.00752795 Jy ! Component: 1500 - total flux cleaned = -0.0073703 Jy ! Component: 1550 - total flux cleaned = -0.00744801 Jy ! Component: 1600 - total flux cleaned = -0.0074462 Jy ! Component: 1650 - total flux cleaned = -0.00721619 Jy ! Component: 1700 - total flux cleaned = -0.00714192 Jy ! Component: 1750 - total flux cleaned = -0.00728977 Jy ! Component: 1800 - total flux cleaned = -0.00699516 Jy ! Component: 1850 - total flux cleaned = -0.00706935 Jy ! Component: 1900 - total flux cleaned = -0.00707011 Jy ! Component: 1950 - total flux cleaned = -0.00714121 Jy ! Component: 2000 - total flux cleaned = -0.00735181 Jy ! Component: 2050 - total flux cleaned = -0.00707198 Jy ! Component: 2100 - total flux cleaned = -0.00707241 Jy ! Component: 2150 - total flux cleaned = -0.00720987 Jy ! Component: 2200 - total flux cleaned = -0.00720992 Jy ! Component: 2250 - total flux cleaned = -0.0070756 Jy ! Component: 2300 - total flux cleaned = -0.00701012 Jy ! Component: 2350 - total flux cleaned = -0.00707664 Jy ! Component: 2400 - total flux cleaned = -0.00714111 Jy ! Component: 2450 - total flux cleaned = -0.0070759 Jy ! Component: 2500 - total flux cleaned = -0.00714017 Jy ! Component: 2550 - total flux cleaned = -0.0071395 Jy ! Component: 2600 - total flux cleaned = -0.00720321 Jy ! Component: 2650 - total flux cleaned = -0.00739066 Jy ! Component: 2700 - total flux cleaned = -0.00751407 Jy ! Component: 2750 - total flux cleaned = -0.00745227 Jy ! Component: 2800 - total flux cleaned = -0.00757391 Jy ! Component: 2850 - total flux cleaned = -0.00745322 Jy ! Component: 2900 - total flux cleaned = -0.00745225 Jy ! Component: 2950 - total flux cleaned = -0.00733382 Jy ! Component: 3000 - total flux cleaned = -0.00745257 Jy ! Component: 3050 - total flux cleaned = -0.00751085 Jy ! Component: 3100 - total flux cleaned = -0.00745233 Jy ! Component: 3150 - total flux cleaned = -0.00745297 Jy ! Component: 3200 - total flux cleaned = -0.00762459 Jy ! Component: 3250 - total flux cleaned = -0.00768138 Jy ! Component: 3300 - total flux cleaned = -0.00779455 Jy ! Component: 3350 - total flux cleaned = -0.00779485 Jy ! Component: 3400 - total flux cleaned = -0.00801798 Jy ! Component: 3450 - total flux cleaned = -0.00785222 Jy ! Component: 3500 - total flux cleaned = -0.00818202 Jy ! Component: 3550 - total flux cleaned = -0.00829116 Jy ! Component: 3600 - total flux cleaned = -0.00845372 Jy ! Component: 3650 - total flux cleaned = -0.00866866 Jy ! Component: 3700 - total flux cleaned = -0.00888238 Jy ! Component: 3750 - total flux cleaned = -0.00909568 Jy ! Component: 3800 - total flux cleaned = -0.00914855 Jy ! Component: 3850 - total flux cleaned = -0.00941138 Jy ! Component: 3900 - total flux cleaned = -0.00972493 Jy ! Component: 3950 - total flux cleaned = -0.00988067 Jy ! Component: 4000 - total flux cleaned = -0.0100872 Jy ! Component: 4050 - total flux cleaned = -0.0104464 Jy ! Total flux subtracted in 4096 components = -0.0104976 Jy ! Clean residual min=-0.002756 max=0.002866 Jy/beam ! Clean residual mean=-0.000018 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.680139 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 324 components and 0.680139 Jy ![Exited script file: muppet] wmap "J0406-3826_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.235 x 9.127 at -4.262 degrees (North through East) ! Clean map min=-0.022098 max=0.60405 Jy/beam ! Writing clean map to FITS file: J0406-3826_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.60405 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000968963 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.481233 0.481233 0.962466 1.92493 3.84987 7.69973 15.3995 30.7989 61.5979 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.604 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.235 x 9.127 at -4.262 degrees (North through East) ! Clean map min=-0.022098 max=0.60405 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-3826_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:16:08 2019