! Started logfile: J0406-2355_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:30:47 2019 obs J0406-2355_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0406-2355_S_2017_03_27_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968187 visibilities/baseline/integration-bin. ! Found source: J0406-2355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 16556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0406-2355_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 309 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952469Jy sigma=0.006330 ! Fit after self-cal, rms=0.927108Jy sigma=0.006181 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.39 mas, bmaj=6.97 mas, bpa=-6.789 degrees ! Estimated noise=1322.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594703 Jy ! Component: 100 - total flux cleaned = 0.0757982 Jy ! Total flux subtracted in 100 components = 0.0757982 Jy ! Clean residual min=-0.004935 max=0.007070 Jy/beam ! Clean residual mean=-0.000006 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.0757982 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0757982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114141Jy sigma=0.000677 ! Fit after self-cal, rms=0.114015Jy sigma=0.000677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.034 mas, bpa=-4.933 degrees ! Estimated noise=903.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0083293 Jy ! Component: 100 - total flux cleaned = 0.0122515 Jy ! Component: 150 - total flux cleaned = 0.0143111 Jy ! Component: 200 - total flux cleaned = 0.0152439 Jy ! Total flux subtracted in 200 components = 0.0152439 Jy ! Clean residual min=-0.002909 max=0.003235 Jy/beam ! Clean residual mean=-0.000014 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.0910421 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.0910421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113446Jy sigma=0.000673 ! Fit after self-cal, rms=0.113468Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.09 KP 0.96 ! LA 1.03 MK 0.99 NL 0.97 OV 1.07 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 1.02 KP 1.02 ! LA 0.96 MK 1.03 NL 1.03 OV 1.12 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.10 KP 1.00 ! LA 0.97 MK 1.07 NL 0.99 OV 1.02 ! PT 0.92 SC 1.10 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 0.97 KP 1.00* ! LA 0.89 MK 0.84 NL 1.00* OV 0.71 ! PT 1.04 SC 0.49 ! ! ! Fit before self-cal, rms=0.113468Jy sigma=0.000673 ! Fit after self-cal, rms=0.106683Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.053 mas, bpa=-5.074 degrees ! Estimated noise=904.704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371553 Jy ! Component: 100 - total flux cleaned = 0.000432573 Jy ! Component: 150 - total flux cleaned = 0.000460536 Jy ! Component: 200 - total flux cleaned = 0.000485429 Jy ! Total flux subtracted in 200 components = 0.000485429 Jy ! Clean residual min=-0.002958 max=0.002854 Jy/beam ! Clean residual mean=-0.000011 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.0915276 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.0915276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106667Jy sigma=0.000670 ! Fit after self-cal, rms=0.106642Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106642Jy sigma=0.000670 ! Fit after self-cal, rms=0.107891Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=8.026 mas, bpa=-5.087 degrees ! Estimated noise=915.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127147 Jy ! Component: 100 - total flux cleaned = 0.0013868 Jy ! Component: 150 - total flux cleaned = 0.00138763 Jy ! Component: 200 - total flux cleaned = 0.00141095 Jy ! Total flux subtracted in 200 components = 0.00141095 Jy ! Clean residual min=-0.002842 max=0.002778 Jy/beam ! Clean residual mean=-0.000009 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.0929385 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0929385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107871Jy sigma=0.000669 ! Fit after self-cal, rms=0.107911Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.39773e-05 Jy ! Component: 100 - total flux cleaned = 1.80136e-06 Jy ! Component: 150 - total flux cleaned = 8.73076e-07 Jy ! Component: 200 - total flux cleaned = 2.04969e-07 Jy ! Total flux subtracted in 200 components = 2.04969e-07 Jy ! Clean residual min=-0.002797 max=0.002740 Jy/beam ! Clean residual mean=-0.000009 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0929387 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0929387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107903Jy sigma=0.000668 ! Fit after self-cal, rms=0.107900Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107900Jy sigma=0.000668 ! Fit after self-cal, rms=0.109166Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=7.98 mas, bpa=-5.072 degrees ! Estimated noise=915.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060041 Jy ! Component: 100 - total flux cleaned = 0.000580043 Jy ! Component: 150 - total flux cleaned = 0.000579074 Jy ! Component: 200 - total flux cleaned = 0.000579724 Jy ! Total flux subtracted in 200 components = 0.000579724 Jy ! Clean residual min=-0.002742 max=0.003088 Jy/beam ! Clean residual mean=-0.000003 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0935185 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0935184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109156Jy sigma=0.000667 ! Fit after self-cal, rms=0.109406Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.89822e-05 Jy ! Component: 100 - total flux cleaned = -6.49544e-05 Jy ! Component: 150 - total flux cleaned = -6.57009e-05 Jy ! Component: 200 - total flux cleaned = -8.05974e-05 Jy ! Total flux subtracted in 200 components = -8.05974e-05 Jy ! Clean residual min=-0.002629 max=0.002839 Jy/beam ! Clean residual mean=-0.000005 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0934378 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0934379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109401Jy sigma=0.000667 ! Fit after self-cal, rms=0.109402Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109402Jy sigma=0.000667 ! Fit after self-cal, rms=0.110674Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.735 mas, bmaj=17.96 mas, bpa=0.5384 degrees ! Estimated noise=1170.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602907 Jy ! Component: 100 - total flux cleaned = 0.000621439 Jy ! Component: 150 - total flux cleaned = 0.000650521 Jy ! Component: 200 - total flux cleaned = 0.000662444 Jy ! Total flux subtracted in 200 components = 0.000662444 Jy ! Clean residual min=-0.003691 max=0.003453 Jy/beam ! Clean residual mean=-0.000010 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.0941003 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.0941003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110671Jy sigma=0.000666 ! Fit after self-cal, rms=0.110756Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.78386e-05 Jy ! Component: 100 - total flux cleaned = -8.49109e-05 Jy ! Component: 150 - total flux cleaned = -6.36913e-05 Jy ! Component: 200 - total flux cleaned = -5.47772e-05 Jy ! Total flux subtracted in 200 components = -5.47772e-05 Jy ! Clean residual min=-0.003624 max=0.003426 Jy/beam ! Clean residual mean=-0.000011 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.0940455 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.0940455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110759Jy sigma=0.000666 ! Fit after self-cal, rms=0.110755Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.959 mas, bpa=-5.126 degrees ! Estimated noise=916.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 7.959 at -5.126 degrees (North through East) ! Clean map min=-0.0024764 max=0.07666 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=6.871 mas, bpa=-6.948 degrees ! Estimated noise=1312.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0586246 Jy ! Component: 100 - total flux cleaned = 0.0763579 Jy ! Component: 150 - total flux cleaned = 0.0847617 Jy ! Component: 200 - total flux cleaned = 0.0894583 Jy ! Total flux subtracted in 200 components = 0.0894583 Jy ! Clean residual min=-0.003890 max=0.003768 Jy/beam ! Clean residual mean=0.000004 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0894583 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0894583 Jy ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.959 mas, bpa=-5.126 degrees ! Estimated noise=916.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352396 Jy ! Component: 100 - total flux cleaned = 0.00542192 Jy ! Component: 150 - total flux cleaned = 0.0062268 Jy ! Component: 200 - total flux cleaned = 0.00670367 Jy ! Total flux subtracted in 200 components = 0.00670367 Jy ! Clean residual min=-0.002545 max=0.002841 Jy/beam ! Clean residual mean=-0.000003 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.096162 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 0.096162 Jy ! Inverting map ! Added new window around map position (-85.5, 125). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227855 Jy ! Component: 100 - total flux cleaned = 0.00319146 Jy ! Component: 150 - total flux cleaned = 0.00333296 Jy ! Component: 200 - total flux cleaned = 0.00349785 Jy ! Total flux subtracted in 200 components = 0.00349785 Jy ! Clean residual min=-0.002401 max=0.002425 Jy/beam ! Clean residual mean=-0.000006 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0996599 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 52 components and 0.0996599 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.735 mas, bmaj=17.96 mas, bpa=0.5384 degrees ! Estimated noise=1170.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420974 Jy ! Component: 100 - total flux cleaned = 0.000485125 Jy ! Component: 150 - total flux cleaned = 0.000541526 Jy ! Component: 200 - total flux cleaned = 0.000590956 Jy ! Total flux subtracted in 200 components = 0.000590956 Jy ! Clean residual min=-0.003103 max=0.003332 Jy/beam ! Clean residual mean=-0.000011 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.100251 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.31525e-05 Jy ! Component: 100 - total flux cleaned = 2.35529e-05 Jy ! Component: 150 - total flux cleaned = 2.34137e-05 Jy ! Component: 200 - total flux cleaned = 2.30135e-05 Jy ! Total flux subtracted in 200 components = 2.30135e-05 Jy ! Clean residual min=-0.003059 max=0.003317 Jy/beam ! Clean residual mean=-0.000011 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.100274 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.100274 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.959 mas, bpa=-5.126 degrees ! Estimated noise=916.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.45712e-05 Jy ! Component: 100 - total flux cleaned = 8.28519e-05 Jy ! Component: 150 - total flux cleaned = 4.98795e-05 Jy ! Component: 200 - total flux cleaned = 7.65901e-05 Jy ! Total flux subtracted in 200 components = 7.65901e-05 Jy ! Clean residual min=-0.002406 max=0.002353 Jy/beam ! Clean residual mean=-0.000005 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.10035 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.10035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110650Jy sigma=0.000666 ! Fit after self-cal, rms=0.110622Jy sigma=0.000666 wmodel J0406-2355_S_2017_03_27_pus_map.mod ! Writing 85 model components to file: J0406-2355_S_2017_03_27_pus_map.mod wobs J0406-2355_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0406-2355_S_2017_03_27_pus_uvs.fits wwins J0406-2355_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J0406-2355_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186502 Jy ! Component: 100 - total flux cleaned = 0.000103145 Jy ! Component: 150 - total flux cleaned = 0.000456652 Jy ! Component: 200 - total flux cleaned = 0.000570588 Jy ! Component: 250 - total flux cleaned = 0.00064345 Jy ! Component: 300 - total flux cleaned = 0.000607662 Jy ! Component: 350 - total flux cleaned = 0.000573451 Jy ! Component: 400 - total flux cleaned = 0.000573649 Jy ! Component: 450 - total flux cleaned = 0.000475807 Jy ! Component: 500 - total flux cleaned = 0.000443281 Jy ! Component: 550 - total flux cleaned = 0.0002887 Jy ! Component: 600 - total flux cleaned = 7.74961e-05 Jy ! Component: 650 - total flux cleaned = -6.96654e-05 Jy ! Component: 700 - total flux cleaned = -0.000213309 Jy ! Component: 750 - total flux cleaned = -0.000326621 Jy ! Component: 800 - total flux cleaned = -0.000493107 Jy ! Component: 850 - total flux cleaned = -0.000493176 Jy ! Component: 900 - total flux cleaned = -0.000628257 Jy ! Component: 950 - total flux cleaned = -0.00068146 Jy ! Component: 1000 - total flux cleaned = -0.000681555 Jy ! Component: 1050 - total flux cleaned = -0.000758762 Jy ! Component: 1100 - total flux cleaned = -0.000784611 Jy ! Component: 1150 - total flux cleaned = -0.000884603 Jy ! Component: 1200 - total flux cleaned = -0.000884786 Jy ! Component: 1250 - total flux cleaned = -0.000860845 Jy ! Component: 1300 - total flux cleaned = -0.000956582 Jy ! Component: 1350 - total flux cleaned = -0.000956322 Jy ! Component: 1400 - total flux cleaned = -0.000955796 Jy ! Component: 1450 - total flux cleaned = -0.000932469 Jy ! Component: 1500 - total flux cleaned = -0.00100027 Jy ! Component: 1550 - total flux cleaned = -0.00100009 Jy ! Component: 1600 - total flux cleaned = -0.000977756 Jy ! Component: 1650 - total flux cleaned = -0.00097814 Jy ! Component: 1700 - total flux cleaned = -0.000956762 Jy ! Component: 1750 - total flux cleaned = -0.0010636 Jy ! Component: 1800 - total flux cleaned = -0.00102133 Jy ! Component: 1850 - total flux cleaned = -0.00106281 Jy ! Component: 1900 - total flux cleaned = -0.00106275 Jy ! Component: 1950 - total flux cleaned = -0.00112359 Jy ! Component: 2000 - total flux cleaned = -0.00106261 Jy ! Component: 2050 - total flux cleaned = -0.00112299 Jy ! Component: 2100 - total flux cleaned = -0.00112343 Jy ! Component: 2150 - total flux cleaned = -0.00129975 Jy ! Component: 2200 - total flux cleaned = -0.00129961 Jy ! Component: 2250 - total flux cleaned = -0.00128047 Jy ! Component: 2300 - total flux cleaned = -0.0013562 Jy ! Component: 2350 - total flux cleaned = -0.00139375 Jy ! Component: 2400 - total flux cleaned = -0.00141241 Jy ! Component: 2450 - total flux cleaned = -0.00146783 Jy ! Component: 2500 - total flux cleaned = -0.00155936 Jy ! Component: 2550 - total flux cleaned = -0.00161356 Jy ! Component: 2600 - total flux cleaned = -0.00161324 Jy ! Component: 2650 - total flux cleaned = -0.00170216 Jy ! Component: 2700 - total flux cleaned = -0.00170204 Jy ! Component: 2750 - total flux cleaned = -0.00184199 Jy ! Component: 2800 - total flux cleaned = -0.00185914 Jy ! Component: 2850 - total flux cleaned = -0.00189327 Jy ! Component: 2900 - total flux cleaned = -0.0019443 Jy ! Component: 2950 - total flux cleaned = -0.00202878 Jy ! Component: 3000 - total flux cleaned = -0.00204508 Jy ! Component: 3050 - total flux cleaned = -0.00204503 Jy ! Component: 3100 - total flux cleaned = -0.00211104 Jy ! Component: 3150 - total flux cleaned = -0.00214391 Jy ! Component: 3200 - total flux cleaned = -0.00216007 Jy ! Component: 3250 - total flux cleaned = -0.00227282 Jy ! Component: 3300 - total flux cleaned = -0.00224062 Jy ! Component: 3350 - total flux cleaned = -0.00230428 Jy ! Component: 3400 - total flux cleaned = -0.00230423 Jy ! Component: 3450 - total flux cleaned = -0.00233547 Jy ! Component: 3500 - total flux cleaned = -0.00236649 Jy ! Component: 3550 - total flux cleaned = -0.00247433 Jy ! Component: 3600 - total flux cleaned = -0.00247414 Jy ! Component: 3650 - total flux cleaned = -0.00248927 Jy ! Component: 3700 - total flux cleaned = -0.00244401 Jy ! Component: 3750 - total flux cleaned = -0.00250389 Jy ! Component: 3800 - total flux cleaned = -0.00256357 Jy ! Component: 3850 - total flux cleaned = -0.00253411 Jy ! Component: 3900 - total flux cleaned = -0.0026075 Jy ! Component: 3950 - total flux cleaned = -0.00259274 Jy ! Component: 4000 - total flux cleaned = -0.00256377 Jy ! Component: 4050 - total flux cleaned = -0.00257798 Jy ! Total flux subtracted in 4096 components = -0.00256367 Jy ! Clean residual min=-0.000853 max=0.000823 Jy/beam ! Clean residual mean=-0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0977868 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 382 components and 0.0977868 Jy ![Exited script file: muppet] wmap "J0406-2355_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 7.959 at -5.126 degrees (North through East) ! Clean map min=-0.0014664 max=0.077121 Jy/beam ! Writing clean map to FITS file: J0406-2355_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0771212 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000260863 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01475 1.01475 2.02951 4.05902 8.11803 16.2361 32.4721 64.9443 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 7.959 at -5.126 degrees (North through East) ! Clean map min=-0.0014664 max=0.077121 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0406-2355_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:30:53 2019