! Started logfile: J0405-1308_S_2017_09_26_pus_uvs.log on Sat May 11 12:54:39 2019 obs J0405-1308_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0405-1308_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.628205 visibilities/baseline/integration-bin. ! Found source: J0405-1308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0405-1308_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.592502Jy sigma=0.004818 ! Fit after self-cal, rms=0.588514Jy sigma=0.004785 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=18.21 mas, bpa=-18.44 degrees ! Estimated noise=2857.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.322195 Jy ! Component: 100 - total flux cleaned = 0.39384 Jy ! Total flux subtracted in 100 components = 0.39384 Jy ! Clean residual min=-0.019566 max=0.024304 Jy/beam ! Clean residual mean=0.000045 rms=0.005893 Jy/beam ! Combined flux in latest and established models = 0.39384 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.39384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123672Jy sigma=0.000928 ! Fit after self-cal, rms=0.123675Jy sigma=0.000928 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=21.94 mas, bpa=-18.67 degrees ! Estimated noise=2207.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287718 Jy ! Component: 100 - total flux cleaned = 0.04045 Jy ! Component: 150 - total flux cleaned = 0.0432571 Jy ! Component: 200 - total flux cleaned = 0.0442266 Jy ! Total flux subtracted in 200 components = 0.0442266 Jy ! Clean residual min=-0.023418 max=0.017621 Jy/beam ! Clean residual mean=-0.000007 rms=0.005822 Jy/beam ! Combined flux in latest and established models = 0.438067 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 47 components and 0.438067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116503Jy sigma=0.000879 ! Fit after self-cal, rms=0.116329Jy sigma=0.000878 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.01 KP 1.12 ! LA 0.97 MK 1.02 NL 0.90 OV 1.08 ! PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 1.04 ! LA 0.98 MK 1.00 NL 1.03 OV 1.08 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 0.96 ! LA 1.08 MK 1.04 NL 0.94 OV 0.97 ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.95 KP 1.00* ! LA 1.06 MK 1.01 NL 1.00* OV 0.66 ! PT 1.06 ! ! ! Fit before self-cal, rms=0.116329Jy sigma=0.000878 ! Fit after self-cal, rms=0.101808Jy sigma=0.000806 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=21.84 mas, bpa=-18.61 degrees ! Estimated noise=2197.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181845 Jy ! Component: 100 - total flux cleaned = 0.00147586 Jy ! Component: 150 - total flux cleaned = 0.00119408 Jy ! Component: 200 - total flux cleaned = 0.00107223 Jy ! Total flux subtracted in 200 components = 0.00107223 Jy ! Clean residual min=-0.016139 max=0.018728 Jy/beam ! Clean residual mean=-0.000011 rms=0.005240 Jy/beam ! Combined flux in latest and established models = 0.439139 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.439139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101334Jy sigma=0.000802 ! Fit after self-cal, rms=0.101310Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101310Jy sigma=0.000801 ! Fit after self-cal, rms=0.099122Jy sigma=0.000789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=21.65 mas, bpa=-18.63 degrees ! Estimated noise=2194.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110408 Jy ! Component: 100 - total flux cleaned = 0.000561861 Jy ! Component: 150 - total flux cleaned = 0.000204611 Jy ! Component: 200 - total flux cleaned = -0.000181932 Jy ! Total flux subtracted in 200 components = -0.000181932 Jy ! Clean residual min=-0.015537 max=0.017289 Jy/beam ! Clean residual mean=-0.000012 rms=0.004998 Jy/beam ! Combined flux in latest and established models = 0.438957 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.438957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098943Jy sigma=0.000787 ! Fit after self-cal, rms=0.098894Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.41796e-05 Jy ! Component: 100 - total flux cleaned = -0.000198582 Jy ! Component: 150 - total flux cleaned = -0.00026464 Jy ! Component: 200 - total flux cleaned = -0.000327216 Jy ! Total flux subtracted in 200 components = -0.000327216 Jy ! Clean residual min=-0.015445 max=0.016899 Jy/beam ! Clean residual mean=-0.000012 rms=0.004971 Jy/beam ! Combined flux in latest and established models = 0.43863 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.43863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098816Jy sigma=0.000786 ! Fit after self-cal, rms=0.098785Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098785Jy sigma=0.000786 ! Fit after self-cal, rms=0.098610Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=21.55 mas, bpa=-18.63 degrees ! Estimated noise=2192.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.82988e-05 Jy ! Component: 100 - total flux cleaned = -0.000164781 Jy ! Component: 150 - total flux cleaned = -0.000352084 Jy ! Component: 200 - total flux cleaned = -0.000574156 Jy ! Total flux subtracted in 200 components = -0.000574156 Jy ! Clean residual min=-0.015377 max=0.016493 Jy/beam ! Clean residual mean=-0.000010 rms=0.004944 Jy/beam ! Combined flux in latest and established models = 0.438056 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.438056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098516Jy sigma=0.000784 ! Fit after self-cal, rms=0.098495Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.12465e-05 Jy ! Component: 100 - total flux cleaned = -0.000161752 Jy ! Component: 150 - total flux cleaned = -0.000256798 Jy ! Component: 200 - total flux cleaned = -0.000300777 Jy ! Total flux subtracted in 200 components = -0.000300777 Jy ! Clean residual min=-0.015574 max=0.016529 Jy/beam ! Clean residual mean=-0.000010 rms=0.004929 Jy/beam ! Combined flux in latest and established models = 0.437755 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.437755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098455Jy sigma=0.000784 ! Fit after self-cal, rms=0.098441Jy sigma=0.000784 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098441Jy sigma=0.000784 ! Fit after self-cal, rms=0.098523Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.274 mas, bmaj=26.5 mas, bpa=-14.28 degrees ! Estimated noise=2643.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182985 Jy ! Component: 100 - total flux cleaned = -0.00245122 Jy ! Component: 150 - total flux cleaned = -0.00293675 Jy ! Component: 200 - total flux cleaned = -0.00305454 Jy ! Total flux subtracted in 200 components = -0.00305454 Jy ! Clean residual min=-0.022544 max=0.023539 Jy/beam ! Clean residual mean=-0.000011 rms=0.008085 Jy/beam ! Combined flux in latest and established models = 0.434701 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 114 components and 0.434701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098517Jy sigma=0.000783 ! Fit after self-cal, rms=0.098436Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364291 Jy ! Component: 100 - total flux cleaned = -0.000542649 Jy ! Component: 150 - total flux cleaned = -0.000543222 Jy ! Component: 200 - total flux cleaned = -0.000636993 Jy ! Total flux subtracted in 200 components = -0.000636993 Jy ! Clean residual min=-0.022326 max=0.023321 Jy/beam ! Clean residual mean=-0.000012 rms=0.008067 Jy/beam ! Combined flux in latest and established models = 0.434064 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 0.434064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098458Jy sigma=0.000783 ! Fit after self-cal, rms=0.098425Jy sigma=0.000783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=21.53 mas, bpa=-18.64 degrees ! Estimated noise=2194.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 21.53 at -18.64 degrees (North through East) ! Clean map min=-0.015968 max=0.41389 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=17.82 mas, bpa=-18.37 degrees ! Estimated noise=2826.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.318669 Jy ! Component: 100 - total flux cleaned = 0.390115 Jy ! Component: 150 - total flux cleaned = 0.415433 Jy ! Component: 200 - total flux cleaned = 0.426505 Jy ! Total flux subtracted in 200 components = 0.426505 Jy ! Clean residual min=-0.010729 max=0.017267 Jy/beam ! Clean residual mean=0.000032 rms=0.003560 Jy/beam ! Combined flux in latest and established models = 0.426505 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.426505 Jy ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=21.53 mas, bpa=-18.64 degrees ! Estimated noise=2194.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413625 Jy ! Component: 100 - total flux cleaned = 0.00682542 Jy ! Component: 150 - total flux cleaned = 0.00882079 Jy ! Component: 200 - total flux cleaned = 0.00960431 Jy ! Total flux subtracted in 200 components = 0.00960431 Jy ! Clean residual min=-0.015736 max=0.016523 Jy/beam ! Clean residual mean=-0.000007 rms=0.005151 Jy/beam ! Combined flux in latest and established models = 0.436109 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 0.436109 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.274 mas, bmaj=26.5 mas, bpa=-14.28 degrees ! Estimated noise=2643.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116187 Jy ! Component: 100 - total flux cleaned = -0.000978655 Jy ! Component: 150 - total flux cleaned = -0.00134883 Jy ! Component: 200 - total flux cleaned = -0.00167878 Jy ! Total flux subtracted in 200 components = -0.00167878 Jy ! Clean residual min=-0.022457 max=0.023484 Jy/beam ! Clean residual mean=-0.000012 rms=0.008239 Jy/beam ! Combined flux in latest and established models = 0.43443 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201825 Jy ! Component: 100 - total flux cleaned = -0.000388018 Jy ! Component: 150 - total flux cleaned = -0.000559658 Jy ! Component: 200 - total flux cleaned = -0.000721812 Jy ! Total flux subtracted in 200 components = -0.000721812 Jy ! Clean residual min=-0.022440 max=0.023312 Jy/beam ! Clean residual mean=-0.000011 rms=0.008161 Jy/beam ! Combined flux in latest and established models = 0.433708 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 69 components and 0.433708 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=21.53 mas, bpa=-18.64 degrees ! Estimated noise=2194.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741176 Jy ! Component: 100 - total flux cleaned = 0.000743514 Jy ! Component: 150 - total flux cleaned = 0.000893793 Jy ! Component: 200 - total flux cleaned = 0.00096126 Jy ! Total flux subtracted in 200 components = 0.00096126 Jy ! Clean residual min=-0.016064 max=0.016493 Jy/beam ! Clean residual mean=-0.000008 rms=0.004922 Jy/beam ! Combined flux in latest and established models = 0.43467 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.43467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098576Jy sigma=0.000784 ! Fit after self-cal, rms=0.098587Jy sigma=0.000784 wmodel J0405-1308_S_2017_09_26_pus_map.mod ! Writing 80 model components to file: J0405-1308_S_2017_09_26_pus_map.mod wobs J0405-1308_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0405-1308_S_2017_09_26_pus_uvs.fits wwins J0405-1308_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0405-1308_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300828 Jy ! Component: 100 - total flux cleaned = 0.00456009 Jy ! Component: 150 - total flux cleaned = 0.00571161 Jy ! Component: 200 - total flux cleaned = 0.00636256 Jy ! Component: 250 - total flux cleaned = 0.00713916 Jy ! Component: 300 - total flux cleaned = 0.00730975 Jy ! Component: 350 - total flux cleaned = 0.0078251 Jy ! Component: 400 - total flux cleaned = 0.00814469 Jy ! Component: 450 - total flux cleaned = 0.00828528 Jy ! Component: 500 - total flux cleaned = 0.00870402 Jy ! Component: 550 - total flux cleaned = 0.008842 Jy ! Component: 600 - total flux cleaned = 0.00909743 Jy ! Component: 650 - total flux cleaned = 0.00873526 Jy ! Component: 700 - total flux cleaned = 0.00850592 Jy ! Component: 750 - total flux cleaned = 0.00839237 Jy ! Component: 800 - total flux cleaned = 0.00817835 Jy ! Component: 850 - total flux cleaned = 0.0082805 Jy ! Component: 900 - total flux cleaned = 0.00828123 Jy ! Component: 950 - total flux cleaned = 0.00818561 Jy ! Component: 1000 - total flux cleaned = 0.00809259 Jy ! Component: 1050 - total flux cleaned = 0.0076465 Jy ! Component: 1100 - total flux cleaned = 0.00738837 Jy ! Component: 1150 - total flux cleaned = 0.00705192 Jy ! Component: 1200 - total flux cleaned = 0.00664334 Jy ! Component: 1250 - total flux cleaned = 0.006326 Jy ! Component: 1300 - total flux cleaned = 0.00594167 Jy ! Component: 1350 - total flux cleaned = 0.0054948 Jy ! Component: 1400 - total flux cleaned = 0.00527871 Jy ! Component: 1450 - total flux cleaned = 0.0051383 Jy ! Component: 1500 - total flux cleaned = 0.00486287 Jy ! Component: 1550 - total flux cleaned = 0.00466078 Jy ! Component: 1600 - total flux cleaned = 0.00472831 Jy ! Component: 1650 - total flux cleaned = 0.00466351 Jy ! Component: 1700 - total flux cleaned = 0.00472558 Jy ! Component: 1750 - total flux cleaned = 0.00472606 Jy ! Component: 1800 - total flux cleaned = 0.00472548 Jy ! Component: 1850 - total flux cleaned = 0.00454501 Jy ! Component: 1900 - total flux cleaned = 0.00454384 Jy ! Component: 1950 - total flux cleaned = 0.00431025 Jy ! Component: 2000 - total flux cleaned = 0.00413815 Jy ! Component: 2050 - total flux cleaned = 0.00385376 Jy ! Component: 2100 - total flux cleaned = 0.00357386 Jy ! Component: 2150 - total flux cleaned = 0.00346334 Jy ! Component: 2200 - total flux cleaned = 0.00329975 Jy ! Component: 2250 - total flux cleaned = 0.00308402 Jy ! Component: 2300 - total flux cleaned = 0.00292424 Jy ! Component: 2350 - total flux cleaned = 0.0028713 Jy ! Component: 2400 - total flux cleaned = 0.00255772 Jy ! Component: 2450 - total flux cleaned = 0.00229938 Jy ! Component: 2500 - total flux cleaned = 0.00209489 Jy ! Component: 2550 - total flux cleaned = 0.00194317 Jy ! Component: 2600 - total flux cleaned = 0.0016417 Jy ! Component: 2650 - total flux cleaned = 0.00149227 Jy ! Component: 2700 - total flux cleaned = 0.00129574 Jy ! Component: 2750 - total flux cleaned = 0.00124717 Jy ! Component: 2800 - total flux cleaned = 0.00115038 Jy ! Component: 2850 - total flux cleaned = 0.000910444 Jy ! Component: 2900 - total flux cleaned = 0.000815922 Jy ! Component: 2950 - total flux cleaned = 0.000768705 Jy ! Component: 3000 - total flux cleaned = 0.000628187 Jy ! Component: 3050 - total flux cleaned = 0.000488931 Jy ! Component: 3100 - total flux cleaned = 0.000488988 Jy ! Component: 3150 - total flux cleaned = 0.000259653 Jy ! Component: 3200 - total flux cleaned = 0.000214274 Jy ! Component: 3250 - total flux cleaned = 0.000259328 Jy ! Component: 3300 - total flux cleaned = 0.000169149 Jy ! Component: 3350 - total flux cleaned = 0.000169116 Jy ! Component: 3400 - total flux cleaned = 0.000168962 Jy ! Component: 3450 - total flux cleaned = 0.000168868 Jy ! Component: 3500 - total flux cleaned = 0.000301451 Jy ! Component: 3550 - total flux cleaned = 0.000169684 Jy ! Component: 3600 - total flux cleaned = 0.000257292 Jy ! Component: 3650 - total flux cleaned = 0.000431559 Jy ! Component: 3700 - total flux cleaned = 0.000388377 Jy ! Component: 3750 - total flux cleaned = 0.000561791 Jy ! Component: 3800 - total flux cleaned = 0.000604951 Jy ! Component: 3850 - total flux cleaned = 0.00073427 Jy ! Component: 3900 - total flux cleaned = 0.000734466 Jy ! Component: 3950 - total flux cleaned = 0.000777574 Jy ! Component: 4000 - total flux cleaned = 0.000905899 Jy ! Component: 4050 - total flux cleaned = 0.000948524 Jy ! Total flux subtracted in 4096 components = 0.000991394 Jy ! Clean residual min=-0.002804 max=0.002417 Jy/beam ! Clean residual mean=-0.000001 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.435661 Jy keep ! Adding 437 model components to the UV plane model. ! The established model now contains 517 components and 0.435661 Jy ![Exited script file: muppet] wmap "J0405-1308_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 21.53 at -18.64 degrees (North through East) ! Clean map min=-0.013188 max=0.41413 Jy/beam ! Writing clean map to FITS file: J0405-1308_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.414128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000920486 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.666812 0.666812 1.33362 2.66725 5.33449 10.669 21.338 42.676 85.3519 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.414 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 21.53 at -18.64 degrees (North through East) ! Clean map min=-0.013188 max=0.41413 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0405-1308_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:54:43 2019