! Started logfile: J0405-1308_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:38:00 2019 obs J0405-1308_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0405-1308_S_2017_05_31_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.442222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0405-1308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0405-1308_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.620784Jy sigma=0.004841 ! Fit after self-cal, rms=0.613271Jy sigma=0.004783 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=23.37 mas, bpa=16.82 degrees ! Estimated noise=4614.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298813 Jy ! Component: 100 - total flux cleaned = 0.368782 Jy ! Total flux subtracted in 100 components = 0.368782 Jy ! Clean residual min=-0.028460 max=0.031749 Jy/beam ! Clean residual mean=-0.000094 rms=0.009150 Jy/beam ! Combined flux in latest and established models = 0.368782 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.368782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140733Jy sigma=0.000947 ! Fit after self-cal, rms=0.140747Jy sigma=0.000947 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.385 mas, bmaj=25.41 mas, bpa=16.49 degrees ! Estimated noise=3863.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325831 Jy ! Component: 100 - total flux cleaned = 0.0419445 Jy ! Component: 150 - total flux cleaned = 0.0430078 Jy ! Component: 200 - total flux cleaned = 0.044343 Jy ! Total flux subtracted in 200 components = 0.044343 Jy ! Clean residual min=-0.030004 max=0.029817 Jy/beam ! Clean residual mean=0.000224 rms=0.008598 Jy/beam ! Combined flux in latest and established models = 0.413126 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.413126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129678Jy sigma=0.000886 ! Fit after self-cal, rms=0.129326Jy sigma=0.000885 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.00* KP 1.08 ! LA 0.93 MK 1.00* NL 1.00* OV 1.12 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.93 ! LA 0.99 MK 1.00* NL 1.00* OV 1.13 ! PT 0.89 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.98 HN 1.00* KP 0.98 ! LA 1.13 MK 1.00* NL 1.00* OV 0.98 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.22 ! LA 1.14 MK 1.00* NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.129326Jy sigma=0.000885 ! Fit after self-cal, rms=0.109732Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.427 mas, bmaj=24.47 mas, bpa=16.71 degrees ! Estimated noise=3823.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392727 Jy ! Component: 100 - total flux cleaned = 0.00434957 Jy ! Component: 150 - total flux cleaned = 0.0048489 Jy ! Component: 200 - total flux cleaned = 0.00506692 Jy ! Total flux subtracted in 200 components = 0.00506692 Jy ! Clean residual min=-0.019877 max=0.027895 Jy/beam ! Clean residual mean=0.000250 rms=0.007193 Jy/beam ! Combined flux in latest and established models = 0.418192 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 60 components and 0.418192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109076Jy sigma=0.000783 ! Fit after self-cal, rms=0.108956Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108956Jy sigma=0.000782 ! Fit after self-cal, rms=0.108878Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.422 mas, bmaj=24.43 mas, bpa=16.72 degrees ! Estimated noise=3826.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173417 Jy ! Component: 100 - total flux cleaned = 0.00205303 Jy ! Component: 150 - total flux cleaned = 0.00213764 Jy ! Component: 200 - total flux cleaned = 0.00221975 Jy ! Total flux subtracted in 200 components = 0.00221975 Jy ! Clean residual min=-0.020406 max=0.027139 Jy/beam ! Clean residual mean=0.000245 rms=0.007025 Jy/beam ! Combined flux in latest and established models = 0.420412 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 82 components and 0.420412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108682Jy sigma=0.000779 ! Fit after self-cal, rms=0.108482Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436889 Jy ! Component: 100 - total flux cleaned = -0.000440675 Jy ! Component: 150 - total flux cleaned = -0.000302162 Jy ! Component: 200 - total flux cleaned = -0.000233739 Jy ! Total flux subtracted in 200 components = -0.000233739 Jy ! Clean residual min=-0.020461 max=0.026533 Jy/beam ! Clean residual mean=0.000245 rms=0.006936 Jy/beam ! Combined flux in latest and established models = 0.420178 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.420179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108376Jy sigma=0.000778 ! Fit after self-cal, rms=0.108219Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108219Jy sigma=0.000778 ! Fit after self-cal, rms=0.108112Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.426 mas, bmaj=24.38 mas, bpa=16.73 degrees ! Estimated noise=3829.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569333 Jy ! Component: 100 - total flux cleaned = 0.00079668 Jy ! Component: 150 - total flux cleaned = 0.000861024 Jy ! Component: 200 - total flux cleaned = 0.000924422 Jy ! Total flux subtracted in 200 components = 0.000924422 Jy ! Clean residual min=-0.020584 max=0.026088 Jy/beam ! Clean residual mean=0.000248 rms=0.006856 Jy/beam ! Combined flux in latest and established models = 0.421103 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 0.421103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108023Jy sigma=0.000776 ! Fit after self-cal, rms=0.107906Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413375 Jy ! Component: 100 - total flux cleaned = -0.000349871 Jy ! Component: 150 - total flux cleaned = -0.000228437 Jy ! Component: 200 - total flux cleaned = -0.00016997 Jy ! Total flux subtracted in 200 components = -0.00016997 Jy ! Clean residual min=-0.020598 max=0.025618 Jy/beam ! Clean residual mean=0.000248 rms=0.006799 Jy/beam ! Combined flux in latest and established models = 0.420933 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 0.420933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107845Jy sigma=0.000775 ! Fit after self-cal, rms=0.107752Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107752Jy sigma=0.000775 ! Fit after self-cal, rms=0.107735Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.15 mas, bmaj=23.36 mas, bpa=15.19 degrees ! Estimated noise=4342.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291928 Jy ! Component: 100 - total flux cleaned = 0.00307949 Jy ! Component: 150 - total flux cleaned = 0.00329818 Jy ! Component: 200 - total flux cleaned = 0.0035058 Jy ! Total flux subtracted in 200 components = 0.0035058 Jy ! Clean residual min=-0.023130 max=0.030728 Jy/beam ! Clean residual mean=0.000320 rms=0.008731 Jy/beam ! Combined flux in latest and established models = 0.424439 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 139 components and 0.424439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107749Jy sigma=0.000774 ! Fit after self-cal, rms=0.107654Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.32037e-05 Jy ! Component: 100 - total flux cleaned = 8.14968e-05 Jy ! Component: 150 - total flux cleaned = 0.000212152 Jy ! Component: 200 - total flux cleaned = 0.000340634 Jy ! Total flux subtracted in 200 components = 0.000340634 Jy ! Clean residual min=-0.022925 max=0.030164 Jy/beam ! Clean residual mean=0.000319 rms=0.008640 Jy/beam ! Combined flux in latest and established models = 0.424779 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 143 components and 0.424779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107660Jy sigma=0.000773 ! Fit after self-cal, rms=0.107593Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.433 mas, bmaj=24.33 mas, bpa=16.74 degrees ! Estimated noise=3834.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.433 x 24.33 at 16.74 degrees (North through East) ! Clean map min=-0.020917 max=0.35805 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.479 mas, bmaj=22.14 mas, bpa=17.08 degrees ! Estimated noise=4537.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.293891 Jy ! Component: 100 - total flux cleaned = 0.360411 Jy ! Component: 150 - total flux cleaned = 0.389594 Jy ! Component: 200 - total flux cleaned = 0.404916 Jy ! Total flux subtracted in 200 components = 0.404916 Jy ! Clean residual min=-0.023012 max=0.021464 Jy/beam ! Clean residual mean=0.000123 rms=0.006442 Jy/beam ! Combined flux in latest and established models = 0.404916 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.404916 Jy ! Inverting map and beam ! Estimated beam: bmin=4.433 mas, bmaj=24.33 mas, bpa=16.74 degrees ! Estimated noise=3834.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491731 Jy ! Component: 100 - total flux cleaned = 0.00791395 Jy ! Component: 150 - total flux cleaned = 0.00964676 Jy ! Component: 200 - total flux cleaned = 0.0104836 Jy ! Total flux subtracted in 200 components = 0.0104836 Jy ! Clean residual min=-0.020162 max=0.025904 Jy/beam ! Clean residual mean=0.000222 rms=0.006837 Jy/beam ! Combined flux in latest and established models = 0.4154 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 60 components and 0.4154 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.15 mas, bmaj=23.36 mas, bpa=15.19 degrees ! Estimated noise=4342.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223229 Jy ! Component: 100 - total flux cleaned = 0.00296083 Jy ! Component: 150 - total flux cleaned = 0.00347304 Jy ! Component: 200 - total flux cleaned = 0.00383012 Jy ! Total flux subtracted in 200 components = 0.00383012 Jy ! Clean residual min=-0.022882 max=0.031677 Jy/beam ! Clean residual mean=0.000316 rms=0.008736 Jy/beam ! Combined flux in latest and established models = 0.41923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338187 Jy ! Component: 100 - total flux cleaned = 0.000660937 Jy ! Component: 150 - total flux cleaned = 0.000963061 Jy ! Component: 200 - total flux cleaned = 0.00125305 Jy ! Total flux subtracted in 200 components = 0.00125305 Jy ! Clean residual min=-0.022779 max=0.031149 Jy/beam ! Clean residual mean=0.000316 rms=0.008667 Jy/beam ! Combined flux in latest and established models = 0.420483 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.420483 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.433 mas, bmaj=24.33 mas, bpa=16.74 degrees ! Estimated noise=3834.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000742564 Jy ! Component: 100 - total flux cleaned = -0.000997704 Jy ! Component: 150 - total flux cleaned = -0.00114517 Jy ! Component: 200 - total flux cleaned = -0.00114525 Jy ! Total flux subtracted in 200 components = -0.00114525 Jy ! Clean residual min=-0.020029 max=0.025038 Jy/beam ! Clean residual mean=0.000246 rms=0.006641 Jy/beam ! Combined flux in latest and established models = 0.419338 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 111 components and 0.419338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107491Jy sigma=0.000772 ! Fit after self-cal, rms=0.107394Jy sigma=0.000772 wmodel J0405-1308_S_2017_05_31_pus_map.mod ! Writing 111 model components to file: J0405-1308_S_2017_05_31_pus_map.mod wobs J0405-1308_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0405-1308_S_2017_05_31_pus_uvs.fits wwins J0405-1308_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0405-1308_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00807362 Jy ! Component: 100 - total flux cleaned = 0.0104139 Jy ! Component: 150 - total flux cleaned = 0.0124303 Jy ! Component: 200 - total flux cleaned = 0.0136823 Jy ! Component: 250 - total flux cleaned = 0.014329 Jy ! Component: 300 - total flux cleaned = 0.0145235 Jy ! Component: 350 - total flux cleaned = 0.0150474 Jy ! Component: 400 - total flux cleaned = 0.0156785 Jy ! Component: 450 - total flux cleaned = 0.0156809 Jy ! Component: 500 - total flux cleaned = 0.0152792 Jy ! Component: 550 - total flux cleaned = 0.0146572 Jy ! Component: 600 - total flux cleaned = 0.014081 Jy ! Component: 650 - total flux cleaned = 0.0132099 Jy ! Component: 700 - total flux cleaned = 0.0123889 Jy ! Component: 750 - total flux cleaned = 0.0117065 Jy ! Component: 800 - total flux cleaned = 0.0110622 Jy ! Component: 850 - total flux cleaned = 0.0107999 Jy ! Component: 900 - total flux cleaned = 0.0104659 Jy ! Component: 950 - total flux cleaned = 0.0103087 Jy ! Component: 1000 - total flux cleaned = 0.0100786 Jy ! Component: 1050 - total flux cleaned = 0.00977948 Jy ! Component: 1100 - total flux cleaned = 0.00970763 Jy ! Component: 1150 - total flux cleaned = 0.00942619 Jy ! Component: 1200 - total flux cleaned = 0.00921976 Jy ! Component: 1250 - total flux cleaned = 0.00928592 Jy ! Component: 1300 - total flux cleaned = 0.00928557 Jy ! Component: 1350 - total flux cleaned = 0.00928523 Jy ! Component: 1400 - total flux cleaned = 0.00941461 Jy ! Component: 1450 - total flux cleaned = 0.00947824 Jy ! Component: 1500 - total flux cleaned = 0.00960534 Jy ! Component: 1550 - total flux cleaned = 0.00966804 Jy ! Component: 1600 - total flux cleaned = 0.0096669 Jy ! Component: 1650 - total flux cleaned = 0.00973029 Jy ! Component: 1700 - total flux cleaned = 0.00979428 Jy ! Component: 1750 - total flux cleaned = 0.00985752 Jy ! Component: 1800 - total flux cleaned = 0.00979096 Jy ! Component: 1850 - total flux cleaned = 0.00985728 Jy ! Component: 1900 - total flux cleaned = 0.00985724 Jy ! Component: 1950 - total flux cleaned = 0.00985811 Jy ! Component: 2000 - total flux cleaned = 0.00972077 Jy ! Component: 2050 - total flux cleaned = 0.00971974 Jy ! Component: 2100 - total flux cleaned = 0.00957905 Jy ! Component: 2150 - total flux cleaned = 0.00950667 Jy ! Component: 2200 - total flux cleaned = 0.00943313 Jy ! Component: 2250 - total flux cleaned = 0.00928327 Jy ! Component: 2300 - total flux cleaned = 0.00936066 Jy ! Component: 2350 - total flux cleaned = 0.00943797 Jy ! Component: 2400 - total flux cleaned = 0.00951791 Jy ! Component: 2450 - total flux cleaned = 0.00943637 Jy ! Component: 2500 - total flux cleaned = 0.00951898 Jy ! Component: 2550 - total flux cleaned = 0.00952 Jy ! Component: 2600 - total flux cleaned = 0.00943211 Jy ! Component: 2650 - total flux cleaned = 0.00943018 Jy ! Component: 2700 - total flux cleaned = 0.00951975 Jy ! Component: 2750 - total flux cleaned = 0.00951925 Jy ! Component: 2800 - total flux cleaned = 0.0096146 Jy ! Component: 2850 - total flux cleaned = 0.0095157 Jy ! Component: 2900 - total flux cleaned = 0.00961595 Jy ! Component: 2950 - total flux cleaned = 0.00971839 Jy ! Component: 3000 - total flux cleaned = 0.00982258 Jy ! Component: 3050 - total flux cleaned = 0.00993059 Jy ! Component: 3100 - total flux cleaned = 0.0101543 Jy ! Component: 3150 - total flux cleaned = 0.0101553 Jy ! Component: 3200 - total flux cleaned = 0.0102728 Jy ! Component: 3250 - total flux cleaned = 0.0102736 Jy ! Component: 3300 - total flux cleaned = 0.0102744 Jy ! Component: 3350 - total flux cleaned = 0.010276 Jy ! Component: 3400 - total flux cleaned = 0.0102781 Jy ! Component: 3450 - total flux cleaned = 0.0102779 Jy ! Component: 3500 - total flux cleaned = 0.010139 Jy ! Component: 3550 - total flux cleaned = 0.0101385 Jy ! Component: 3600 - total flux cleaned = 0.0101356 Jy ! Component: 3650 - total flux cleaned = 0.010135 Jy ! Component: 3700 - total flux cleaned = 0.0102904 Jy ! Component: 3750 - total flux cleaned = 0.0101318 Jy ! Component: 3800 - total flux cleaned = 0.010295 Jy ! Component: 3850 - total flux cleaned = 0.0101265 Jy ! Component: 3900 - total flux cleaned = 0.0102962 Jy ! Component: 3950 - total flux cleaned = 0.0101206 Jy ! Component: 4000 - total flux cleaned = 0.0101172 Jy ! Component: 4050 - total flux cleaned = 0.0103021 Jy ! Total flux subtracted in 4096 components = 0.0103007 Jy ! Clean residual min=-0.012818 max=0.012146 Jy/beam ! Clean residual mean=-0.000084 rms=0.003140 Jy/beam ! Combined flux in latest and established models = 0.429639 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 384 components and 0.429639 Jy ![Exited script file: muppet] wmap "J0405-1308_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.433 x 24.33 at 16.74 degrees (North through East) ! Clean map min=-0.022779 max=0.36302 Jy/beam ! Writing clean map to FITS file: J0405-1308_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.363021 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00354426 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.92897 2.92897 5.85794 11.7159 23.4318 46.8635 93.7271 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0106 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.363 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.433 x 24.33 at 16.74 degrees (North through East) ! Clean map min=-0.022779 max=0.36302 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0405-1308_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:38:09 2019