! Started logfile: J0405-1308_S_2017_04_28_pus_uvs.log on Thu May 2 16:15:59 2019 obs J0405-1308_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0405-1308_S_2017_04_28_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.676667 visibilities/baseline/integration-bin. ! Found source: J0405-1308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 2436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0405-1308_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.676721Jy sigma=0.055331 ! Fit after self-cal, rms=0.682811Jy sigma=0.054552 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=8.734 mas, bpa=-10.68 degrees ! Estimated noise=1323.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11451 Jy ! Component: 100 - total flux cleaned = 0.121544 Jy ! Total flux subtracted in 100 components = 0.121544 Jy ! Clean residual min=-0.059392 max=0.075513 Jy/beam ! Clean residual mean=-0.000089 rms=0.019356 Jy/beam ! Combined flux in latest and established models = 0.121543 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.121543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267756Jy sigma=0.006713 ! Fit after self-cal, rms=0.267719Jy sigma=0.006712 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=9.988 mas, bpa=-9.115 degrees ! Estimated noise=1014.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00797975 Jy ! Component: 100 - total flux cleaned = -0.0110366 Jy ! Component: 150 - total flux cleaned = -0.0144656 Jy ! Component: 200 - total flux cleaned = -0.0169641 Jy ! Total flux subtracted in 200 components = -0.0169641 Jy ! Clean residual min=-0.050473 max=0.064941 Jy/beam ! Clean residual mean=-0.000226 rms=0.016436 Jy/beam ! Combined flux in latest and established models = 0.104579 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.104579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261750Jy sigma=0.006469 ! Fit after self-cal, rms=0.261698Jy sigma=0.006469 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.67 FD 0.57 HN 0.63 KP 0.56 ! LA 0.50 MK 0.65 NL 0.56 OV 0.59 ! PT 0.56 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 0.52 HN 0.67 KP 0.54 ! LA 0.49 MK 0.64 NL 0.67 OV 0.60 ! PT 0.54 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.55 HN 0.66 KP 0.55 ! LA 0.49 MK 0.66 NL 0.61 OV 0.56 ! PT 0.54 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.66 HN 0.71 KP 1.00* ! LA 36.53 MK 1.11 NL 1.00* OV 1.00* ! PT 0.73 SC 1.00* ! ! ! Fit before self-cal, rms=0.261698Jy sigma=0.006469 ! Fit after self-cal, rms=0.073495Jy sigma=0.000855 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=8.846 mas, bpa=-5.267 degrees ! Estimated noise=990.493 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430791 Jy ! Component: 100 - total flux cleaned = 0.00493947 Jy ! Component: 150 - total flux cleaned = 0.00519862 Jy ! Component: 200 - total flux cleaned = 0.00535161 Jy ! Total flux subtracted in 200 components = 0.00535161 Jy ! Clean residual min=-0.006339 max=0.008269 Jy/beam ! Clean residual mean=-0.000041 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.109931 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.109931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073184Jy sigma=0.000847 ! Fit after self-cal, rms=0.064652Jy sigma=0.000796 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064652Jy sigma=0.000796 ! Fit after self-cal, rms=0.056105Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=8.759 mas, bpa=-5.694 degrees ! Estimated noise=980.861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273931 Jy ! Component: 100 - total flux cleaned = 0.0033585 Jy ! Component: 150 - total flux cleaned = 0.00364271 Jy ! Component: 200 - total flux cleaned = 0.00384169 Jy ! Total flux subtracted in 200 components = 0.00384169 Jy ! Clean residual min=-0.005451 max=0.007368 Jy/beam ! Clean residual mean=-0.000041 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.113773 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.113773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055943Jy sigma=0.000774 ! Fit after self-cal, rms=0.055963Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686952 Jy ! Component: 100 - total flux cleaned = 0.0101072 Jy ! Component: 150 - total flux cleaned = 0.0122188 Jy ! Component: 200 - total flux cleaned = 0.0135049 Jy ! Total flux subtracted in 200 components = 0.0135049 Jy ! Clean residual min=-0.004916 max=0.006080 Jy/beam ! Clean residual mean=-0.000042 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.127278 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 52 components and 0.127278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055131Jy sigma=0.000758 ! Fit after self-cal, rms=0.055141Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055141Jy sigma=0.000757 ! Fit after self-cal, rms=0.055063Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.779 mas, bpa=-5.609 degrees ! Estimated noise=984.791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184388 Jy ! Component: 100 - total flux cleaned = 0.00237305 Jy ! Component: 150 - total flux cleaned = 0.00281879 Jy ! Component: 200 - total flux cleaned = 0.003048 Jy ! Total flux subtracted in 200 components = 0.003048 Jy ! Clean residual min=-0.003858 max=0.005696 Jy/beam ! Clean residual mean=-0.000023 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.130326 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 0.130326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054834Jy sigma=0.000718 ! Fit after self-cal, rms=0.054897Jy sigma=0.000718 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (59.5, -66). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523005 Jy ! Component: 100 - total flux cleaned = 0.00795626 Jy ! Component: 150 - total flux cleaned = 0.009648 Jy ! Component: 200 - total flux cleaned = 0.0103576 Jy ! Total flux subtracted in 200 components = 0.0103576 Jy ! Clean residual min=-0.003937 max=0.004343 Jy/beam ! Clean residual mean=-0.000019 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.140683 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 0.140683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054472Jy sigma=0.000704 ! Fit after self-cal, rms=0.054432Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054432Jy sigma=0.000704 ! Fit after self-cal, rms=0.054730Jy sigma=0.000703 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.069 mas, bmaj=16.24 mas, bpa=2.197 degrees ! Estimated noise=1124.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272578 Jy ! Component: 100 - total flux cleaned = 0.00391099 Jy ! Component: 150 - total flux cleaned = 0.0046746 Jy ! Component: 200 - total flux cleaned = 0.00498391 Jy ! Total flux subtracted in 200 components = 0.00498391 Jy ! Clean residual min=-0.005389 max=0.005822 Jy/beam ! Clean residual mean=-0.000029 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.145667 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.145667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054785Jy sigma=0.000700 ! Fit after self-cal, rms=0.054774Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000778713 Jy ! Component: 100 - total flux cleaned = 0.00102022 Jy ! Component: 150 - total flux cleaned = 0.00128099 Jy ! Component: 200 - total flux cleaned = 0.00143875 Jy ! Total flux subtracted in 200 components = 0.00143875 Jy ! Clean residual min=-0.005449 max=0.005739 Jy/beam ! Clean residual mean=-0.000028 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.147106 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.147106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054796Jy sigma=0.000699 ! Fit after self-cal, rms=0.054784Jy sigma=0.000699 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.792 mas, bpa=-5.589 degrees ! Estimated noise=984.438 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.792 at -5.589 degrees (North through East) ! Clean map min=-0.0046656 max=0.14617 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.704 mas, bmaj=7.638 mas, bpa=-6.866 degrees ! Estimated noise=1253.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110329 Jy ! Component: 100 - total flux cleaned = 0.130859 Jy ! Component: 150 - total flux cleaned = 0.13141 Jy ! Component: 200 - total flux cleaned = 0.131411 Jy ! Total flux subtracted in 200 components = 0.131411 Jy ! Clean residual min=-0.006680 max=0.007411 Jy/beam ! Clean residual mean=-0.000007 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.131411 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.131411 Jy ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.792 mas, bpa=-5.589 degrees ! Estimated noise=984.438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428268 Jy ! Component: 100 - total flux cleaned = 0.00686741 Jy ! Component: 150 - total flux cleaned = 0.00885174 Jy ! Component: 200 - total flux cleaned = 0.0106034 Jy ! Total flux subtracted in 200 components = 0.0106034 Jy ! Clean residual min=-0.004379 max=0.005767 Jy/beam ! Clean residual mean=-0.000017 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.142015 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 25 components and 0.142015 Jy ! Inverting map ! Added new window around map position (-127, 125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354085 Jy ! Component: 100 - total flux cleaned = 0.00482739 Jy ! Component: 150 - total flux cleaned = 0.00625823 Jy ! Component: 200 - total flux cleaned = 0.00728633 Jy ! Total flux subtracted in 200 components = 0.00728633 Jy ! Clean residual min=-0.004021 max=0.004642 Jy/beam ! Clean residual mean=-0.000012 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.149301 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.149301 Jy ! Inverting map ! Added new window around map position (-17.5, 26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420705 Jy ! Component: 100 - total flux cleaned = 0.00560831 Jy ! Component: 150 - total flux cleaned = 0.00655487 Jy ! Component: 200 - total flux cleaned = 0.00733019 Jy ! Total flux subtracted in 200 components = 0.00733019 Jy ! Clean residual min=-0.003564 max=0.003915 Jy/beam ! Clean residual mean=-0.000011 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.156631 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 51 components and 0.156631 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.069 mas, bmaj=16.24 mas, bpa=2.197 degrees ! Estimated noise=1124.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180435 Jy ! Component: 100 - total flux cleaned = 0.00275596 Jy ! Component: 150 - total flux cleaned = 0.00306796 Jy ! Component: 200 - total flux cleaned = 0.00329069 Jy ! Total flux subtracted in 200 components = 0.00329069 Jy ! Clean residual min=-0.004181 max=0.004587 Jy/beam ! Clean residual mean=-0.000017 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.159922 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.00192e-05 Jy ! Component: 100 - total flux cleaned = 5.14715e-05 Jy ! Component: 150 - total flux cleaned = 0.000139949 Jy ! Component: 200 - total flux cleaned = 0.000140281 Jy ! Total flux subtracted in 200 components = 0.000140281 Jy ! Clean residual min=-0.004050 max=0.004494 Jy/beam ! Clean residual mean=-0.000016 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.160062 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 85 components and 0.160062 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.792 mas, bpa=-5.589 degrees ! Estimated noise=984.438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277644 Jy ! Component: 100 - total flux cleaned = 0.000445696 Jy ! Component: 150 - total flux cleaned = 0.000516533 Jy ! Component: 200 - total flux cleaned = 0.000515938 Jy ! Total flux subtracted in 200 components = 0.000515938 Jy ! Clean residual min=-0.003493 max=0.003460 Jy/beam ! Clean residual mean=-0.000008 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.160578 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.160578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054436Jy sigma=0.000690 ! Fit after self-cal, rms=0.054400Jy sigma=0.000689 wmodel J0405-1308_S_2017_04_28_pus_map.mod ! Writing 101 model components to file: J0405-1308_S_2017_04_28_pus_map.mod wobs J0405-1308_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0405-1308_S_2017_04_28_pus_uvs.fits wwins J0405-1308_S_2017_04_28_pus_map.win ! wwins: Wrote 5 windows to J0405-1308_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456477 Jy ! Component: 100 - total flux cleaned = 0.000923284 Jy ! Component: 150 - total flux cleaned = 0.00125598 Jy ! Component: 200 - total flux cleaned = 0.00162497 Jy ! Component: 250 - total flux cleaned = 0.00177676 Jy ! Component: 300 - total flux cleaned = 0.00182649 Jy ! Component: 350 - total flux cleaned = 0.00187416 Jy ! Component: 400 - total flux cleaned = 0.00191972 Jy ! Component: 450 - total flux cleaned = 0.00200837 Jy ! Component: 500 - total flux cleaned = 0.00183454 Jy ! Component: 550 - total flux cleaned = 0.00183531 Jy ! Component: 600 - total flux cleaned = 0.00195987 Jy ! Component: 650 - total flux cleaned = 0.00183695 Jy ! Component: 700 - total flux cleaned = 0.00175643 Jy ! Component: 750 - total flux cleaned = 0.00175616 Jy ! Component: 800 - total flux cleaned = 0.00171759 Jy ! Component: 850 - total flux cleaned = 0.00164134 Jy ! Component: 900 - total flux cleaned = 0.00164135 Jy ! Component: 950 - total flux cleaned = 0.00164123 Jy ! Component: 1000 - total flux cleaned = 0.00160421 Jy ! Component: 1050 - total flux cleaned = 0.00149635 Jy ! Component: 1100 - total flux cleaned = 0.00146165 Jy ! Component: 1150 - total flux cleaned = 0.00149671 Jy ! Component: 1200 - total flux cleaned = 0.00146204 Jy ! Component: 1250 - total flux cleaned = 0.00136019 Jy ! Component: 1300 - total flux cleaned = 0.00139368 Jy ! Component: 1350 - total flux cleaned = 0.00136056 Jy ! Component: 1400 - total flux cleaned = 0.00129589 Jy ! Component: 1450 - total flux cleaned = 0.001328 Jy ! Component: 1500 - total flux cleaned = 0.00139146 Jy ! Component: 1550 - total flux cleaned = 0.00142277 Jy ! Component: 1600 - total flux cleaned = 0.00132957 Jy ! Component: 1650 - total flux cleaned = 0.00136084 Jy ! Component: 1700 - total flux cleaned = 0.00139142 Jy ! Component: 1750 - total flux cleaned = 0.00136125 Jy ! Component: 1800 - total flux cleaned = 0.00124251 Jy ! Component: 1850 - total flux cleaned = 0.00118411 Jy ! Component: 1900 - total flux cleaned = 0.00112617 Jy ! Component: 1950 - total flux cleaned = 0.00112605 Jy ! Component: 2000 - total flux cleaned = 0.00106866 Jy ! Component: 2050 - total flux cleaned = 0.000956239 Jy ! Component: 2100 - total flux cleaned = 0.000844707 Jy ! Component: 2150 - total flux cleaned = 0.000844656 Jy ! Component: 2200 - total flux cleaned = 0.000626307 Jy ! Component: 2250 - total flux cleaned = 0.000545663 Jy ! Component: 2300 - total flux cleaned = 0.000545731 Jy ! Component: 2350 - total flux cleaned = 0.00051953 Jy ! Component: 2400 - total flux cleaned = 0.000519647 Jy ! Component: 2450 - total flux cleaned = 0.000441669 Jy ! Component: 2500 - total flux cleaned = 0.000390243 Jy ! Component: 2550 - total flux cleaned = 0.000287966 Jy ! Component: 2600 - total flux cleaned = 0.000313354 Jy ! Component: 2650 - total flux cleaned = 0.000312947 Jy ! Component: 2700 - total flux cleaned = 0.000237472 Jy ! Component: 2750 - total flux cleaned = 0.000187873 Jy ! Component: 2800 - total flux cleaned = 0.00013887 Jy ! Component: 2850 - total flux cleaned = 0.000138838 Jy ! Component: 2900 - total flux cleaned = 6.61919e-05 Jy ! Component: 2950 - total flux cleaned = -5.57164e-06 Jy ! Component: 3000 - total flux cleaned = -2.91569e-05 Jy ! Component: 3050 - total flux cleaned = -0.000170739 Jy ! Component: 3100 - total flux cleaned = -0.000193925 Jy ! Component: 3150 - total flux cleaned = -0.000333937 Jy ! Component: 3200 - total flux cleaned = -0.000472535 Jy ! Component: 3250 - total flux cleaned = -0.000587101 Jy ! Component: 3300 - total flux cleaned = -0.00063248 Jy ! Component: 3350 - total flux cleaned = -0.000745787 Jy ! Component: 3400 - total flux cleaned = -0.000903737 Jy ! Component: 3450 - total flux cleaned = -0.00108272 Jy ! Component: 3500 - total flux cleaned = -0.00110495 Jy ! Component: 3550 - total flux cleaned = -0.0012818 Jy ! Component: 3600 - total flux cleaned = -0.00141363 Jy ! Component: 3650 - total flux cleaned = -0.00154467 Jy ! Component: 3700 - total flux cleaned = -0.00167497 Jy ! Component: 3750 - total flux cleaned = -0.00180437 Jy ! Component: 3800 - total flux cleaned = -0.00193283 Jy ! Component: 3850 - total flux cleaned = -0.0019966 Jy ! Component: 3900 - total flux cleaned = -0.00208136 Jy ! Component: 3950 - total flux cleaned = -0.0021238 Jy ! Component: 4000 - total flux cleaned = -0.0022916 Jy ! Component: 4050 - total flux cleaned = -0.00237496 Jy ! Total flux subtracted in 4096 components = -0.00252 Jy ! Clean residual min=-0.001068 max=0.001425 Jy/beam ! Clean residual mean=-0.000012 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.158058 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 374 components and 0.158058 Jy ![Exited script file: muppet] wmap "J0405-1308_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.792 at -5.589 degrees (North through East) ! Clean map min=-0.0031324 max=0.14247 Jy/beam ! Writing clean map to FITS file: J0405-1308_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142471 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000367804 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.774481 0.774481 1.54896 3.09792 6.19585 12.3917 24.7834 49.5668 99.1336 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.792 at -5.589 degrees (North through East) ! Clean map min=-0.0031324 max=0.14247 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0405-1308_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:16:04 2019