! Started logfile: J0405-1308_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:30:42 2019 obs J0405-1308_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0405-1308_S_2017_03_27_pus_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.68366 visibilities/baseline/integration-bin. ! Found source: J0405-1308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 2092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0405-1308_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.670808Jy sigma=0.004802 ! Fit after self-cal, rms=0.664751Jy sigma=0.004763 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=7.886 mas, bpa=1.791 degrees ! Estimated noise=2963.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270762 Jy ! Component: 100 - total flux cleaned = 0.331135 Jy ! Total flux subtracted in 100 components = 0.331135 Jy ! Clean residual min=-0.021811 max=0.019649 Jy/beam ! Clean residual mean=0.000030 rms=0.004782 Jy/beam ! Combined flux in latest and established models = 0.331135 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.331135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143703Jy sigma=0.001012 ! Fit after self-cal, rms=0.143718Jy sigma=0.001012 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=9.395 mas, bpa=1.761 degrees ! Estimated noise=2287.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262422 Jy ! Component: 100 - total flux cleaned = 0.0377318 Jy ! Component: 150 - total flux cleaned = 0.0439399 Jy ! Component: 200 - total flux cleaned = 0.0473678 Jy ! Total flux subtracted in 200 components = 0.0473678 Jy ! Clean residual min=-0.022843 max=0.022093 Jy/beam ! Clean residual mean=0.000058 rms=0.006025 Jy/beam ! Combined flux in latest and established models = 0.378503 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 0.378503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140569Jy sigma=0.000972 ! Fit after self-cal, rms=0.140607Jy sigma=0.000972 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.00 KP 1.02 ! LA 0.90 MK 1.03 NL 1.02 OV 1.08 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.03 KP 0.97 ! LA 0.84 MK 1.09 NL 1.11 OV 1.14 ! PT 0.88 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 0.96 KP 0.99 ! LA 0.94 MK 1.11 NL 1.10 OV 0.97 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.95 KP 1.00* ! LA 1.56 MK 0.90 NL 1.00* OV 1.34 ! PT 1.06 SC 1.27 ! ! ! Fit before self-cal, rms=0.140607Jy sigma=0.000972 ! Fit after self-cal, rms=0.144786Jy sigma=0.000912 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.959 mas, bmaj=9.504 mas, bpa=1.871 degrees ! Estimated noise=2298.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00354373 Jy ! Component: 100 - total flux cleaned = -0.0040888 Jy ! Component: 150 - total flux cleaned = -0.00440858 Jy ! Component: 200 - total flux cleaned = -0.00468305 Jy ! Total flux subtracted in 200 components = -0.00468305 Jy ! Clean residual min=-0.018319 max=0.022194 Jy/beam ! Clean residual mean=0.000048 rms=0.005696 Jy/beam ! Combined flux in latest and established models = 0.37382 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.37382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144613Jy sigma=0.000912 ! Fit after self-cal, rms=0.145221Jy sigma=0.000911 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145221Jy sigma=0.000911 ! Fit after self-cal, rms=0.146492Jy sigma=0.000873 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.977 mas, bmaj=9.533 mas, bpa=1.859 degrees ! Estimated noise=2299.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211215 Jy ! Component: 100 - total flux cleaned = -0.00244054 Jy ! Component: 150 - total flux cleaned = -0.0027134 Jy ! Component: 200 - total flux cleaned = -0.00288626 Jy ! Total flux subtracted in 200 components = -0.00288626 Jy ! Clean residual min=-0.016711 max=0.025517 Jy/beam ! Clean residual mean=0.000037 rms=0.005290 Jy/beam ! Combined flux in latest and established models = 0.370934 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.370934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146358Jy sigma=0.000873 ! Fit after self-cal, rms=0.146532Jy sigma=0.000873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209324 Jy ! Component: 100 - total flux cleaned = 0.0299923 Jy ! Component: 150 - total flux cleaned = 0.0364867 Jy ! Component: 200 - total flux cleaned = 0.0401197 Jy ! Total flux subtracted in 200 components = 0.0401197 Jy ! Clean residual min=-0.015617 max=0.015798 Jy/beam ! Clean residual mean=0.000018 rms=0.004579 Jy/beam ! Combined flux in latest and established models = 0.411054 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 97 components and 0.411054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144317Jy sigma=0.000839 ! Fit after self-cal, rms=0.144206Jy sigma=0.000838 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144206Jy sigma=0.000838 ! Fit after self-cal, rms=0.145708Jy sigma=0.000833 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.018 mas, bmaj=9.611 mas, bpa=1.806 degrees ! Estimated noise=2286.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650321 Jy ! Component: 100 - total flux cleaned = 0.0073712 Jy ! Component: 150 - total flux cleaned = 0.00777055 Jy ! Component: 200 - total flux cleaned = 0.00798801 Jy ! Total flux subtracted in 200 components = 0.00798801 Jy ! Clean residual min=-0.014108 max=0.017344 Jy/beam ! Clean residual mean=0.000021 rms=0.004404 Jy/beam ! Combined flux in latest and established models = 0.419042 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 0.419042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145466Jy sigma=0.000827 ! Fit after self-cal, rms=0.145533Jy sigma=0.000826 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00045349 Jy ! Component: 100 - total flux cleaned = 0.000354701 Jy ! Component: 150 - total flux cleaned = 0.000443261 Jy ! Component: 200 - total flux cleaned = 0.000606368 Jy ! Total flux subtracted in 200 components = 0.000606368 Jy ! Clean residual min=-0.014302 max=0.017198 Jy/beam ! Clean residual mean=0.000021 rms=0.004387 Jy/beam ! Combined flux in latest and established models = 0.419648 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 0.419648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145490Jy sigma=0.000825 ! Fit after self-cal, rms=0.145499Jy sigma=0.000825 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145499Jy sigma=0.000825 ! Fit after self-cal, rms=0.146410Jy sigma=0.000824 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.615 mas, bmaj=16.54 mas, bpa=5.842 degrees ! Estimated noise=2539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201761 Jy ! Component: 100 - total flux cleaned = 0.00209425 Jy ! Component: 150 - total flux cleaned = 0.00209223 Jy ! Component: 200 - total flux cleaned = 0.00185672 Jy ! Total flux subtracted in 200 components = 0.00185672 Jy ! Clean residual min=-0.018977 max=0.021052 Jy/beam ! Clean residual mean=0.000033 rms=0.006430 Jy/beam ! Combined flux in latest and established models = 0.421505 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 123 components and 0.421505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146405Jy sigma=0.000824 ! Fit after self-cal, rms=0.146428Jy sigma=0.000824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133952 Jy ! Component: 100 - total flux cleaned = -0.000187596 Jy ! Component: 150 - total flux cleaned = -0.000234347 Jy ! Component: 200 - total flux cleaned = -0.000281277 Jy ! Total flux subtracted in 200 components = -0.000281277 Jy ! Clean residual min=-0.019111 max=0.021054 Jy/beam ! Clean residual mean=0.000034 rms=0.006422 Jy/beam ! Combined flux in latest and established models = 0.421223 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 130 components and 0.421223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146428Jy sigma=0.000823 ! Fit after self-cal, rms=0.146422Jy sigma=0.000823 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=9.622 mas, bpa=1.801 degrees ! Estimated noise=2281.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.027 x 9.622 at 1.801 degrees (North through East) ! Clean map min=-0.014041 max=0.35427 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.952 mas, bpa=1.992 degrees ! Estimated noise=3051.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278368 Jy ! Component: 100 - total flux cleaned = 0.341459 Jy ! Component: 150 - total flux cleaned = 0.367266 Jy ! Component: 200 - total flux cleaned = 0.381555 Jy ! Total flux subtracted in 200 components = 0.381555 Jy ! Clean residual min=-0.013741 max=0.015314 Jy/beam ! Clean residual mean=0.000010 rms=0.003739 Jy/beam ! Combined flux in latest and established models = 0.381555 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.381555 Jy ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=9.622 mas, bpa=1.801 degrees ! Estimated noise=2281.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108404 Jy ! Component: 100 - total flux cleaned = 0.0166882 Jy ! Component: 150 - total flux cleaned = 0.0206969 Jy ! Component: 200 - total flux cleaned = 0.0238604 Jy ! Total flux subtracted in 200 components = 0.0238604 Jy ! Clean residual min=-0.014681 max=0.017526 Jy/beam ! Clean residual mean=0.000027 rms=0.004434 Jy/beam ! Combined flux in latest and established models = 0.405415 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 62 components and 0.405415 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.615 mas, bmaj=16.54 mas, bpa=5.842 degrees ! Estimated noise=2539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00597145 Jy ! Component: 100 - total flux cleaned = 0.00955252 Jy ! Component: 150 - total flux cleaned = 0.0110328 Jy ! Component: 200 - total flux cleaned = 0.0119197 Jy ! Total flux subtracted in 200 components = 0.0119197 Jy ! Clean residual min=-0.019228 max=0.021139 Jy/beam ! Clean residual mean=0.000034 rms=0.006423 Jy/beam ! Combined flux in latest and established models = 0.417335 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548917 Jy ! Component: 100 - total flux cleaned = 0.000837169 Jy ! Component: 150 - total flux cleaned = 0.000969177 Jy ! Component: 200 - total flux cleaned = 0.00116111 Jy ! Total flux subtracted in 200 components = 0.00116111 Jy ! Clean residual min=-0.019262 max=0.021104 Jy/beam ! Clean residual mean=0.000034 rms=0.006417 Jy/beam ! Combined flux in latest and established models = 0.418496 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 85 components and 0.418496 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=9.622 mas, bpa=1.801 degrees ! Estimated noise=2281.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012654 Jy ! Component: 100 - total flux cleaned = -0.00141558 Jy ! Component: 150 - total flux cleaned = -0.00167109 Jy ! Component: 200 - total flux cleaned = -0.00145719 Jy ! Total flux subtracted in 200 components = -0.00145719 Jy ! Clean residual min=-0.014248 max=0.017840 Jy/beam ! Clean residual mean=0.000023 rms=0.004364 Jy/beam ! Combined flux in latest and established models = 0.417039 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.417039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146625Jy sigma=0.000824 ! Fit after self-cal, rms=0.146577Jy sigma=0.000824 wmodel J0405-1308_S_2017_03_27_pus_map.mod ! Writing 95 model components to file: J0405-1308_S_2017_03_27_pus_map.mod wobs J0405-1308_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0405-1308_S_2017_03_27_pus_uvs.fits wwins J0405-1308_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J0405-1308_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495838 Jy ! Component: 100 - total flux cleaned = 0.00521473 Jy ! Component: 150 - total flux cleaned = 0.00545237 Jy ! Component: 200 - total flux cleaned = 0.00589938 Jy ! Component: 250 - total flux cleaned = 0.00568658 Jy ! Component: 300 - total flux cleaned = 0.00527766 Jy ! Component: 350 - total flux cleaned = 0.00507884 Jy ! Component: 400 - total flux cleaned = 0.00525603 Jy ! Component: 450 - total flux cleaned = 0.0052473 Jy ! Component: 500 - total flux cleaned = 0.00559585 Jy ! Component: 550 - total flux cleaned = 0.00609816 Jy ! Component: 600 - total flux cleaned = 0.00609529 Jy ! Component: 650 - total flux cleaned = 0.0064101 Jy ! Component: 700 - total flux cleaned = 0.00641217 Jy ! Component: 750 - total flux cleaned = 0.00700308 Jy ! Component: 800 - total flux cleaned = 0.00728218 Jy ! Component: 850 - total flux cleaned = 0.00741634 Jy ! Component: 900 - total flux cleaned = 0.00754503 Jy ! Component: 950 - total flux cleaned = 0.00754207 Jy ! Component: 1000 - total flux cleaned = 0.00753869 Jy ! Component: 1050 - total flux cleaned = 0.00753831 Jy ! Component: 1100 - total flux cleaned = 0.00741281 Jy ! Component: 1150 - total flux cleaned = 0.00705595 Jy ! Component: 1200 - total flux cleaned = 0.00670753 Jy ! Component: 1250 - total flux cleaned = 0.00625915 Jy ! Component: 1300 - total flux cleaned = 0.00615035 Jy ! Component: 1350 - total flux cleaned = 0.00593219 Jy ! Component: 1400 - total flux cleaned = 0.00550986 Jy ! Component: 1450 - total flux cleaned = 0.00530174 Jy ! Component: 1500 - total flux cleaned = 0.00499717 Jy ! Component: 1550 - total flux cleaned = 0.00459847 Jy ! Component: 1600 - total flux cleaned = 0.00411056 Jy ! Component: 1650 - total flux cleaned = 0.00382512 Jy ! Component: 1700 - total flux cleaned = 0.00345078 Jy ! Component: 1750 - total flux cleaned = 0.00326626 Jy ! Component: 1800 - total flux cleaned = 0.0029934 Jy ! Component: 1850 - total flux cleaned = 0.00263596 Jy ! Component: 1900 - total flux cleaned = 0.00254798 Jy ! Component: 1950 - total flux cleaned = 0.00228751 Jy ! Component: 2000 - total flux cleaned = 0.0022021 Jy ! Component: 2050 - total flux cleaned = 0.00194961 Jy ! Component: 2100 - total flux cleaned = 0.00170139 Jy ! Component: 2150 - total flux cleaned = 0.00170171 Jy ! Component: 2200 - total flux cleaned = 0.00129937 Jy ! Component: 2250 - total flux cleaned = 0.00145834 Jy ! Component: 2300 - total flux cleaned = 0.00130188 Jy ! Component: 2350 - total flux cleaned = 0.00114698 Jy ! Component: 2400 - total flux cleaned = 0.000841181 Jy ! Component: 2450 - total flux cleaned = 0.000538537 Jy ! Component: 2500 - total flux cleaned = 0.000164453 Jy ! Component: 2550 - total flux cleaned = -5.72206e-05 Jy ! Component: 2600 - total flux cleaned = -0.000203064 Jy ! Component: 2650 - total flux cleaned = -0.000420793 Jy ! Component: 2700 - total flux cleaned = -0.000779644 Jy ! Component: 2750 - total flux cleaned = -0.00106304 Jy ! Component: 2800 - total flux cleaned = -0.00120328 Jy ! Component: 2850 - total flux cleaned = -0.00155308 Jy ! Component: 2900 - total flux cleaned = -0.00169107 Jy ! Component: 2950 - total flux cleaned = -0.00189675 Jy ! Component: 3000 - total flux cleaned = -0.0018977 Jy ! Component: 3050 - total flux cleaned = -0.00216653 Jy ! Component: 3100 - total flux cleaned = -0.00236575 Jy ! Component: 3150 - total flux cleaned = -0.00262843 Jy ! Component: 3200 - total flux cleaned = -0.00275806 Jy ! Component: 3250 - total flux cleaned = -0.00295139 Jy ! Component: 3300 - total flux cleaned = -0.00295156 Jy ! Component: 3350 - total flux cleaned = -0.00326803 Jy ! Component: 3400 - total flux cleaned = -0.0032678 Jy ! Component: 3450 - total flux cleaned = -0.00326871 Jy ! Component: 3500 - total flux cleaned = -0.00351495 Jy ! Component: 3550 - total flux cleaned = -0.00357671 Jy ! Component: 3600 - total flux cleaned = -0.00351645 Jy ! Component: 3650 - total flux cleaned = -0.00357697 Jy ! Component: 3700 - total flux cleaned = -0.0038167 Jy ! Component: 3750 - total flux cleaned = -0.00393554 Jy ! Component: 3800 - total flux cleaned = -0.00405279 Jy ! Component: 3850 - total flux cleaned = -0.00416959 Jy ! Component: 3900 - total flux cleaned = -0.00422781 Jy ! Component: 3950 - total flux cleaned = -0.0043438 Jy ! Component: 4000 - total flux cleaned = -0.00451608 Jy ! Component: 4050 - total flux cleaned = -0.00462968 Jy ! Total flux subtracted in 4096 components = -0.00479976 Jy ! Clean residual min=-0.003147 max=0.003887 Jy/beam ! Clean residual mean=0.000013 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.412239 Jy keep ! Adding 391 model components to the UV plane model. ! The established model now contains 486 components and 0.412239 Jy ![Exited script file: muppet] wmap "J0405-1308_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.027 x 9.622 at 1.801 degrees (North through East) ! Clean map min=-0.0080441 max=0.35514 Jy/beam ! Writing clean map to FITS file: J0405-1308_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.355136 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00112062 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.946643 0.946643 1.89329 3.78657 7.57315 15.1463 30.2926 60.5852 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.355 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.027 x 9.622 at 1.801 degrees (North through East) ! Clean map min=-0.0080441 max=0.35514 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0405-1308_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:30:47 2019