! Started logfile: J0405-1308_S_2017_02_24_pus_uvs.log on Sat May 4 11:17:30 2019 obs J0405-1308_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0405-1308_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J0405-1308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 1248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0405-1308_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.663231Jy sigma=0.005108 ! Fit after self-cal, rms=0.658705Jy sigma=0.005071 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=6.887 mas, bpa=-1.028 degrees ! Estimated noise=3455.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264102 Jy ! Component: 100 - total flux cleaned = 0.323822 Jy ! Total flux subtracted in 100 components = 0.323822 Jy ! Clean residual min=-0.017726 max=0.025403 Jy/beam ! Clean residual mean=-0.000126 rms=0.006256 Jy/beam ! Combined flux in latest and established models = 0.323822 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.323822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155179Jy sigma=0.001206 ! Fit after self-cal, rms=0.155175Jy sigma=0.001206 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.938 mas, bpa=0.9156 degrees ! Estimated noise=2846.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391122 Jy ! Component: 100 - total flux cleaned = 0.0598035 Jy ! Component: 150 - total flux cleaned = 0.0724059 Jy ! Component: 200 - total flux cleaned = 0.0800894 Jy ! Total flux subtracted in 200 components = 0.0800894 Jy ! Clean residual min=-0.026206 max=0.036245 Jy/beam ! Clean residual mean=-0.000198 rms=0.012151 Jy/beam ! Combined flux in latest and established models = 0.403911 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 42 components and 0.403911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144956Jy sigma=0.001129 ! Fit after self-cal, rms=0.145025Jy sigma=0.001129 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.31 HN 1.21 KP 0.98 ! LA 0.77 MK 1.00 NL 1.11 OV 1.35 ! PT 0.83 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.15 HN 1.22 KP 0.97 ! LA 0.73 MK 1.05 NL 1.05 OV 1.26 ! PT 0.78 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.09 HN 1.07 KP 1.11 ! LA 0.83 MK 1.05 NL 1.22 OV 1.19 ! PT 0.81 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.83 HN 0.90 KP 1.00* ! LA 0.71 MK 1.05 NL 1.00* OV 1.17 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.145025Jy sigma=0.001129 ! Fit after self-cal, rms=0.126305Jy sigma=0.000960 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.204 mas, bmaj=8.082 mas, bpa=0.8575 degrees ! Estimated noise=2899.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-60.5, 54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360724 Jy ! Component: 100 - total flux cleaned = 0.0509478 Jy ! Component: 150 - total flux cleaned = 0.0597334 Jy ! Component: 200 - total flux cleaned = 0.0654549 Jy ! Total flux subtracted in 200 components = 0.0654549 Jy ! Clean residual min=-0.018388 max=0.033597 Jy/beam ! Clean residual mean=-0.000057 rms=0.006128 Jy/beam ! Combined flux in latest and established models = 0.469366 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 81 components and 0.469366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117562Jy sigma=0.000869 ! Fit after self-cal, rms=0.117746Jy sigma=0.000860 ! Inverting map ! Added new window around map position (61, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277856 Jy ! Component: 100 - total flux cleaned = 0.0406106 Jy ! Component: 150 - total flux cleaned = 0.0484552 Jy ! Component: 200 - total flux cleaned = 0.0537876 Jy ! Total flux subtracted in 200 components = 0.0537876 Jy ! Clean residual min=-0.016402 max=0.014576 Jy/beam ! Clean residual mean=-0.000035 rms=0.004171 Jy/beam ! Combined flux in latest and established models = 0.523153 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 125 components and 0.523153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112337Jy sigma=0.000790 ! Fit after self-cal, rms=0.112087Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112087Jy sigma=0.000788 ! Fit after self-cal, rms=0.111846Jy sigma=0.000776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.163 mas, bpa=0.8338 degrees ! Estimated noise=2860.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708193 Jy ! Component: 100 - total flux cleaned = 0.00878611 Jy ! Component: 150 - total flux cleaned = 0.0096175 Jy ! Component: 200 - total flux cleaned = 0.010542 Jy ! Total flux subtracted in 200 components = 0.010542 Jy ! Clean residual min=-0.014803 max=0.013042 Jy/beam ! Clean residual mean=-0.000004 rms=0.003159 Jy/beam ! Combined flux in latest and established models = 0.533695 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 152 components and 0.533695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110858Jy sigma=0.000766 ! Fit after self-cal, rms=0.110909Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107109 Jy ! Component: 100 - total flux cleaned = 0.00170989 Jy ! Component: 150 - total flux cleaned = 0.00199945 Jy ! Component: 200 - total flux cleaned = 0.0021343 Jy ! Total flux subtracted in 200 components = 0.0021343 Jy ! Clean residual min=-0.014993 max=0.012736 Jy/beam ! Clean residual mean=-0.000005 rms=0.003070 Jy/beam ! Combined flux in latest and established models = 0.53583 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 167 components and 0.53583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110476Jy sigma=0.000763 ! Fit after self-cal, rms=0.110505Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110505Jy sigma=0.000763 ! Fit after self-cal, rms=0.110472Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.174 mas, bpa=0.8873 degrees ! Estimated noise=2850.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014027 Jy ! Component: 100 - total flux cleaned = -5.57298e-06 Jy ! Component: 150 - total flux cleaned = -1.01127e-05 Jy ! Component: 200 - total flux cleaned = -0.000249769 Jy ! Total flux subtracted in 200 components = -0.000249769 Jy ! Clean residual min=-0.014765 max=0.012195 Jy/beam ! Clean residual mean=-0.000002 rms=0.002957 Jy/beam ! Combined flux in latest and established models = 0.53558 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 179 components and 0.53558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110117Jy sigma=0.000760 ! Fit after self-cal, rms=0.110157Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267153 Jy ! Component: 100 - total flux cleaned = -8.41576e-05 Jy ! Component: 150 - total flux cleaned = -8.12191e-05 Jy ! Component: 200 - total flux cleaned = -8.08717e-05 Jy ! Total flux subtracted in 200 components = -8.08717e-05 Jy ! Clean residual min=-0.014753 max=0.012039 Jy/beam ! Clean residual mean=-0.000003 rms=0.002921 Jy/beam ! Combined flux in latest and established models = 0.535499 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 194 components and 0.535499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109899Jy sigma=0.000759 ! Fit after self-cal, rms=0.109929Jy sigma=0.000759 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109929Jy sigma=0.000759 ! Fit after self-cal, rms=0.109919Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=17.13 mas, bpa=10.99 degrees ! Estimated noise=3340.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347201 Jy ! Component: 100 - total flux cleaned = -0.000589884 Jy ! Component: 150 - total flux cleaned = -0.00088905 Jy ! Component: 200 - total flux cleaned = -0.00113133 Jy ! Total flux subtracted in 200 components = -0.00113133 Jy ! Clean residual min=-0.015040 max=0.012936 Jy/beam ! Clean residual mean=-0.000000 rms=0.003738 Jy/beam ! Combined flux in latest and established models = 0.534368 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 201 components and 0.534368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109865Jy sigma=0.000759 ! Fit after self-cal, rms=0.109930Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.73228e-05 Jy ! Component: 100 - total flux cleaned = 5.00825e-05 Jy ! Component: 150 - total flux cleaned = 0.000113305 Jy ! Component: 200 - total flux cleaned = 0.000231872 Jy ! Total flux subtracted in 200 components = 0.000231872 Jy ! Clean residual min=-0.014851 max=0.013019 Jy/beam ! Clean residual mean=0.000001 rms=0.003733 Jy/beam ! Combined flux in latest and established models = 0.5346 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 210 components and 0.5346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109914Jy sigma=0.000758 ! Fit after self-cal, rms=0.109939Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=8.183 mas, bpa=0.8701 degrees ! Estimated noise=2844.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 8.183 at 0.8701 degrees (North through East) ! Clean map min=-0.014615 max=0.35046 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=7.046 mas, bpa=-1.252 degrees ! Estimated noise=3610.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275557 Jy ! Component: 100 - total flux cleaned = 0.340466 Jy ! Component: 150 - total flux cleaned = 0.372244 Jy ! Component: 200 - total flux cleaned = 0.393746 Jy ! Total flux subtracted in 200 components = 0.393746 Jy ! Clean residual min=-0.017677 max=0.022468 Jy/beam ! Clean residual mean=-0.000055 rms=0.004784 Jy/beam ! Combined flux in latest and established models = 0.393746 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.393746 Jy ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=8.183 mas, bpa=0.8701 degrees ! Estimated noise=2844.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025285 Jy ! Component: 100 - total flux cleaned = 0.0442987 Jy ! Component: 150 - total flux cleaned = 0.0595586 Jy ! Component: 200 - total flux cleaned = 0.0721565 Jy ! Total flux subtracted in 200 components = 0.0721565 Jy ! Clean residual min=-0.016609 max=0.016269 Jy/beam ! Clean residual mean=-0.000061 rms=0.004512 Jy/beam ! Combined flux in latest and established models = 0.465903 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 79 components and 0.465903 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=17.13 mas, bpa=10.99 degrees ! Estimated noise=3340.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158884 Jy ! Component: 100 - total flux cleaned = 0.0270543 Jy ! Component: 150 - total flux cleaned = 0.0323596 Jy ! Component: 200 - total flux cleaned = 0.0369164 Jy ! Total flux subtracted in 200 components = 0.0369164 Jy ! Clean residual min=-0.018744 max=0.016881 Jy/beam ! Clean residual mean=-0.000054 rms=0.005129 Jy/beam ! Combined flux in latest and established models = 0.502819 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039302 Jy ! Component: 100 - total flux cleaned = 0.007342 Jy ! Component: 150 - total flux cleaned = 0.0103206 Jy ! Component: 200 - total flux cleaned = 0.0123851 Jy ! Total flux subtracted in 200 components = 0.0123851 Jy ! Clean residual min=-0.016868 max=0.015261 Jy/beam ! Clean residual mean=-0.000033 rms=0.004451 Jy/beam ! Combined flux in latest and established models = 0.515204 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 147 components and 0.515204 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=8.183 mas, bpa=0.8701 degrees ! Estimated noise=2844.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392606 Jy ! Component: 100 - total flux cleaned = 0.00598971 Jy ! Component: 150 - total flux cleaned = 0.00756189 Jy ! Component: 200 - total flux cleaned = 0.00932869 Jy ! Total flux subtracted in 200 components = 0.00932869 Jy ! Clean residual min=-0.014961 max=0.012746 Jy/beam ! Clean residual mean=-0.000007 rms=0.003180 Jy/beam ! Combined flux in latest and established models = 0.524533 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 164 components and 0.524533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110869Jy sigma=0.000768 ! Fit after self-cal, rms=0.110821Jy sigma=0.000767 wmodel J0405-1308_S_2017_02_24_pus_map.mod ! Writing 164 model components to file: J0405-1308_S_2017_02_24_pus_map.mod wobs J0405-1308_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0405-1308_S_2017_02_24_pus_uvs.fits wwins J0405-1308_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J0405-1308_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201463 Jy ! Component: 100 - total flux cleaned = -0.000788926 Jy ! Component: 150 - total flux cleaned = -0.000784908 Jy ! Component: 200 - total flux cleaned = 0.000238799 Jy ! Component: 250 - total flux cleaned = 0.00120005 Jy ! Component: 300 - total flux cleaned = 0.00150599 Jy ! Component: 350 - total flux cleaned = 0.00195353 Jy ! Component: 400 - total flux cleaned = 0.0023784 Jy ! Component: 450 - total flux cleaned = 0.00278705 Jy ! Component: 500 - total flux cleaned = 0.00278441 Jy ! Component: 550 - total flux cleaned = 0.00290808 Jy ! Component: 600 - total flux cleaned = 0.00266072 Jy ! Component: 650 - total flux cleaned = 0.002185 Jy ! Component: 700 - total flux cleaned = 0.00218579 Jy ! Component: 750 - total flux cleaned = 0.00230022 Jy ! Component: 800 - total flux cleaned = 0.00230009 Jy ! Component: 850 - total flux cleaned = 0.0023015 Jy ! Component: 900 - total flux cleaned = 0.00261296 Jy ! Component: 950 - total flux cleaned = 0.00241019 Jy ! Component: 1000 - total flux cleaned = 0.00251148 Jy ! Component: 1050 - total flux cleaned = 0.00231629 Jy ! Component: 1100 - total flux cleaned = 0.00241307 Jy ! Component: 1150 - total flux cleaned = 0.00213367 Jy ! Component: 1200 - total flux cleaned = 0.00231885 Jy ! Component: 1250 - total flux cleaned = 0.00240845 Jy ! Component: 1300 - total flux cleaned = 0.00231709 Jy ! Component: 1350 - total flux cleaned = 0.00257682 Jy ! Component: 1400 - total flux cleaned = 0.00266074 Jy ! Component: 1450 - total flux cleaned = 0.00283018 Jy ! Component: 1500 - total flux cleaned = 0.00308081 Jy ! Component: 1550 - total flux cleaned = 0.00340936 Jy ! Component: 1600 - total flux cleaned = 0.00357154 Jy ! Component: 1650 - total flux cleaned = 0.00357249 Jy ! Component: 1700 - total flux cleaned = 0.00357356 Jy ! Component: 1750 - total flux cleaned = 0.00373006 Jy ! Component: 1800 - total flux cleaned = 0.00380682 Jy ! Component: 1850 - total flux cleaned = 0.00380664 Jy ! Component: 1900 - total flux cleaned = 0.00388115 Jy ! Component: 1950 - total flux cleaned = 0.00380577 Jy ! Component: 2000 - total flux cleaned = 0.00358542 Jy ! Component: 2050 - total flux cleaned = 0.00358579 Jy ! Component: 2100 - total flux cleaned = 0.00329731 Jy ! Component: 2150 - total flux cleaned = 0.00344029 Jy ! Component: 2200 - total flux cleaned = 0.00329898 Jy ! Component: 2250 - total flux cleaned = 0.00336833 Jy ! Component: 2300 - total flux cleaned = 0.00322939 Jy ! Component: 2350 - total flux cleaned = 0.00322929 Jy ! Component: 2400 - total flux cleaned = 0.00309274 Jy ! Component: 2450 - total flux cleaned = 0.00322919 Jy ! Component: 2500 - total flux cleaned = 0.00295853 Jy ! Component: 2550 - total flux cleaned = 0.00282401 Jy ! Component: 2600 - total flux cleaned = 0.00262301 Jy ! Component: 2650 - total flux cleaned = 0.00242297 Jy ! Component: 2700 - total flux cleaned = 0.00229034 Jy ! Component: 2750 - total flux cleaned = 0.00215778 Jy ! Component: 2800 - total flux cleaned = 0.00209158 Jy ! Component: 2850 - total flux cleaned = 0.00182943 Jy ! Component: 2900 - total flux cleaned = 0.00176479 Jy ! Component: 2950 - total flux cleaned = 0.00163478 Jy ! Component: 3000 - total flux cleaned = 0.00163445 Jy ! Component: 3050 - total flux cleaned = 0.00150541 Jy ! Component: 3100 - total flux cleaned = 0.00150531 Jy ! Component: 3150 - total flux cleaned = 0.00137693 Jy ! Component: 3200 - total flux cleaned = 0.00144138 Jy ! Component: 3250 - total flux cleaned = 0.00150585 Jy ! Component: 3300 - total flux cleaned = 0.00144173 Jy ! Component: 3350 - total flux cleaned = 0.00150561 Jy ! Component: 3400 - total flux cleaned = 0.00163345 Jy ! Component: 3450 - total flux cleaned = 0.00163321 Jy ! Component: 3500 - total flux cleaned = 0.00163306 Jy ! Component: 3550 - total flux cleaned = 0.00169648 Jy ! Component: 3600 - total flux cleaned = 0.00163326 Jy ! Component: 3650 - total flux cleaned = 0.00176009 Jy ! Component: 3700 - total flux cleaned = 0.00182306 Jy ! Component: 3750 - total flux cleaned = 0.00182306 Jy ! Component: 3800 - total flux cleaned = 0.00188615 Jy ! Component: 3850 - total flux cleaned = 0.00194911 Jy ! Component: 3900 - total flux cleaned = 0.00207496 Jy ! Component: 3950 - total flux cleaned = 0.00207519 Jy ! Component: 4000 - total flux cleaned = 0.00213818 Jy ! Component: 4050 - total flux cleaned = 0.00220139 Jy ! Total flux subtracted in 4096 components = 0.00245342 Jy ! Clean residual min=-0.003829 max=0.004089 Jy/beam ! Clean residual mean=-0.000012 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.526986 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 423 components and 0.526986 Jy ![Exited script file: muppet] wmap "J0405-1308_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 8.183 at 0.8701 degrees (North through East) ! Clean map min=-0.0097064 max=0.35956 Jy/beam ! Writing clean map to FITS file: J0405-1308_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.359556 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010183 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.849633 0.849633 1.69927 3.39853 6.79707 13.5941 27.1883 54.3765 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.359 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 8.183 at 0.8701 degrees (North through East) ! Clean map min=-0.0097064 max=0.35956 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0405-1308_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:17:35 2019