! Started logfile: J0405-1308_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:03:54 2019 obs J0405-1308_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0405-1308_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.5375 visibilities/baseline/integration-bin. ! Found source: J0405-1308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0405-1308_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.696002Jy sigma=0.004620 ! Fit after self-cal, rms=0.692997Jy sigma=0.004600 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.007 mas, bmaj=9.412 mas, bpa=20.25 degrees ! Estimated noise=3640.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254886 Jy ! Component: 100 - total flux cleaned = 0.310719 Jy ! Total flux subtracted in 100 components = 0.310719 Jy ! Clean residual min=-0.018482 max=0.024409 Jy/beam ! Clean residual mean=-0.000093 rms=0.005641 Jy/beam ! Combined flux in latest and established models = 0.310719 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.310719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156698Jy sigma=0.000940 ! Fit after self-cal, rms=0.156691Jy sigma=0.000940 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.703 mas, bmaj=10.64 mas, bpa=20.54 degrees ! Estimated noise=2996.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129228 Jy ! Component: 100 - total flux cleaned = 0.0113667 Jy ! Component: 150 - total flux cleaned = 0.0104342 Jy ! Component: 200 - total flux cleaned = 0.00937957 Jy ! Total flux subtracted in 200 components = 0.00937957 Jy ! Clean residual min=-0.023647 max=0.023568 Jy/beam ! Clean residual mean=-0.000144 rms=0.007092 Jy/beam ! Combined flux in latest and established models = 0.320099 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.320099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154696Jy sigma=0.000924 ! Fit after self-cal, rms=0.154739Jy sigma=0.000924 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.90 HN 0.92 KP 0.93 ! LA 1.06 MK 1.00* NL 0.85 OV 0.96 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 0.92 KP 0.87 ! LA 1.04 MK 1.00* NL 1.13 OV 1.02 ! PT 1.18 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.97 HN 0.92 KP 0.90 ! LA 1.07 MK 1.00* NL 1.10 OV 0.92 ! PT 1.11 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.97 KP 1.00* ! LA 0.88 MK 1.00* NL 1.00* OV 0.86 ! PT 1.06 SC 1.29 ! ! ! Fit before self-cal, rms=0.154739Jy sigma=0.000924 ! Fit after self-cal, rms=0.153366Jy sigma=0.000883 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.739 mas, bmaj=10.48 mas, bpa=19.19 degrees ! Estimated noise=2972.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00440353 Jy ! Component: 100 - total flux cleaned = -0.00482379 Jy ! Component: 150 - total flux cleaned = -0.00516782 Jy ! Component: 200 - total flux cleaned = -0.0054623 Jy ! Total flux subtracted in 200 components = -0.0054623 Jy ! Clean residual min=-0.023760 max=0.021147 Jy/beam ! Clean residual mean=-0.000064 rms=0.006464 Jy/beam ! Combined flux in latest and established models = 0.314637 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.314637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152841Jy sigma=0.000881 ! Fit after self-cal, rms=0.153073Jy sigma=0.000880 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153073Jy sigma=0.000880 ! Fit after self-cal, rms=0.179780Jy sigma=0.000833 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.745 mas, bmaj=10.55 mas, bpa=19.21 degrees ! Estimated noise=2971.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237369 Jy ! Component: 100 - total flux cleaned = -0.0025386 Jy ! Component: 150 - total flux cleaned = -0.00253923 Jy ! Component: 200 - total flux cleaned = -0.00248168 Jy ! Total flux subtracted in 200 components = -0.00248168 Jy ! Clean residual min=-0.022995 max=0.019036 Jy/beam ! Clean residual mean=-0.000006 rms=0.006068 Jy/beam ! Combined flux in latest and established models = 0.312155 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.312155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179614Jy sigma=0.000832 ! Fit after self-cal, rms=0.180095Jy sigma=0.000832 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000698529 Jy ! Component: 100 - total flux cleaned = -0.000753766 Jy ! Component: 150 - total flux cleaned = -0.000658324 Jy ! Component: 200 - total flux cleaned = -0.000660399 Jy ! Total flux subtracted in 200 components = -0.000660399 Jy ! Clean residual min=-0.022768 max=0.018946 Jy/beam ! Clean residual mean=-0.000009 rms=0.006048 Jy/beam ! Combined flux in latest and established models = 0.311494 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.311494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180009Jy sigma=0.000831 ! Fit after self-cal, rms=0.180026Jy sigma=0.000831 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180026Jy sigma=0.000831 ! Fit after self-cal, rms=0.180966Jy sigma=0.000831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.753 mas, bmaj=10.56 mas, bpa=19.14 degrees ! Estimated noise=2972.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013651 Jy ! Component: 100 - total flux cleaned = -0.00136676 Jy ! Component: 150 - total flux cleaned = -0.00136843 Jy ! Component: 200 - total flux cleaned = -0.0014415 Jy ! Total flux subtracted in 200 components = -0.0014415 Jy ! Clean residual min=-0.022407 max=0.018927 Jy/beam ! Clean residual mean=-0.000012 rms=0.006049 Jy/beam ! Combined flux in latest and established models = 0.310053 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.310053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180898Jy sigma=0.000831 ! Fit after self-cal, rms=0.180913Jy sigma=0.000831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307747 Jy ! Component: 100 - total flux cleaned = -0.000273838 Jy ! Component: 150 - total flux cleaned = -0.00027417 Jy ! Component: 200 - total flux cleaned = -0.000273265 Jy ! Total flux subtracted in 200 components = -0.000273265 Jy ! Clean residual min=-0.022380 max=0.018879 Jy/beam ! Clean residual mean=-0.000013 rms=0.006046 Jy/beam ! Combined flux in latest and established models = 0.30978 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.30978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180877Jy sigma=0.000831 ! Fit after self-cal, rms=0.180887Jy sigma=0.000831 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180887Jy sigma=0.000831 ! Fit after self-cal, rms=0.180728Jy sigma=0.000831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.142 mas, bmaj=15 mas, bpa=2.928 degrees ! Estimated noise=3341.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00354259 Jy ! Component: 100 - total flux cleaned = -0.00385781 Jy ! Component: 150 - total flux cleaned = -0.00412307 Jy ! Component: 200 - total flux cleaned = -0.0043466 Jy ! Total flux subtracted in 200 components = -0.0043466 Jy ! Clean residual min=-0.029322 max=0.024919 Jy/beam ! Clean residual mean=-0.000036 rms=0.009178 Jy/beam ! Combined flux in latest and established models = 0.305433 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.305433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180632Jy sigma=0.000831 ! Fit after self-cal, rms=0.180663Jy sigma=0.000831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000935175 Jy ! Component: 100 - total flux cleaned = -0.00108623 Jy ! Component: 150 - total flux cleaned = -0.00117356 Jy ! Component: 200 - total flux cleaned = -0.00128922 Jy ! Total flux subtracted in 200 components = -0.00128922 Jy ! Clean residual min=-0.029409 max=0.024903 Jy/beam ! Clean residual mean=-0.000040 rms=0.009176 Jy/beam ! Combined flux in latest and established models = 0.304144 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.304144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180638Jy sigma=0.000832 ! Fit after self-cal, rms=0.180656Jy sigma=0.000832 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.759 mas, bmaj=10.56 mas, bpa=19.07 degrees ! Estimated noise=2973.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.759 x 10.56 at 19.07 degrees (North through East) ! Clean map min=-0.02203 max=0.33109 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.063 mas, bmaj=9.425 mas, bpa=19.35 degrees ! Estimated noise=3638.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254073 Jy ! Component: 100 - total flux cleaned = 0.309477 Jy ! Component: 150 - total flux cleaned = 0.316613 Jy ! Component: 200 - total flux cleaned = 0.315304 Jy ! Total flux subtracted in 200 components = 0.315304 Jy ! Clean residual min=-0.016520 max=0.016689 Jy/beam ! Clean residual mean=0.000013 rms=0.004053 Jy/beam ! Combined flux in latest and established models = 0.315304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.315304 Jy ! Inverting map and beam ! Estimated beam: bmin=4.759 mas, bmaj=10.56 mas, bpa=19.07 degrees ! Estimated noise=2973.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00194449 Jy ! Component: 100 - total flux cleaned = -0.00260845 Jy ! Component: 150 - total flux cleaned = -0.00296364 Jy ! Component: 200 - total flux cleaned = -0.00357421 Jy ! Total flux subtracted in 200 components = -0.00357421 Jy ! Clean residual min=-0.022458 max=0.019116 Jy/beam ! Clean residual mean=-0.000008 rms=0.006109 Jy/beam ! Combined flux in latest and established models = 0.311729 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.311729 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.142 mas, bmaj=15 mas, bpa=2.928 degrees ! Estimated noise=3341.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00418554 Jy ! Component: 100 - total flux cleaned = -0.00493401 Jy ! Component: 150 - total flux cleaned = -0.00541157 Jy ! Component: 200 - total flux cleaned = -0.00580273 Jy ! Total flux subtracted in 200 components = -0.00580273 Jy ! Clean residual min=-0.029237 max=0.024712 Jy/beam ! Clean residual mean=-0.000035 rms=0.009213 Jy/beam ! Combined flux in latest and established models = 0.305927 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000420041 Jy ! Component: 100 - total flux cleaned = -0.000779497 Jy ! Component: 150 - total flux cleaned = -0.00109161 Jy ! Component: 200 - total flux cleaned = -0.00125584 Jy ! Total flux subtracted in 200 components = -0.00125584 Jy ! Clean residual min=-0.029352 max=0.024733 Jy/beam ! Clean residual mean=-0.000039 rms=0.009194 Jy/beam ! Combined flux in latest and established models = 0.304671 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.304671 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.759 mas, bmaj=10.56 mas, bpa=19.07 degrees ! Estimated noise=2973.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155263 Jy ! Component: 100 - total flux cleaned = 0.00203128 Jy ! Component: 150 - total flux cleaned = 0.00226943 Jy ! Component: 200 - total flux cleaned = 0.00240864 Jy ! Total flux subtracted in 200 components = 0.00240864 Jy ! Clean residual min=-0.022638 max=0.018730 Jy/beam ! Clean residual mean=-0.000018 rms=0.006060 Jy/beam ! Combined flux in latest and established models = 0.307079 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.307079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180740Jy sigma=0.000832 ! Fit after self-cal, rms=0.180706Jy sigma=0.000832 wmodel J0405-1308_S_2017_01_16_pus_map.mod ! Writing 42 model components to file: J0405-1308_S_2017_01_16_pus_map.mod wobs J0405-1308_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0405-1308_S_2017_01_16_pus_uvs.fits wwins J0405-1308_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0405-1308_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00596216 Jy ! Component: 100 - total flux cleaned = -0.00789819 Jy ! Component: 150 - total flux cleaned = -0.0105335 Jy ! Component: 200 - total flux cleaned = -0.011612 Jy ! Component: 250 - total flux cleaned = -0.0123697 Jy ! Component: 300 - total flux cleaned = -0.0126072 Jy ! Component: 350 - total flux cleaned = -0.0126057 Jy ! Component: 400 - total flux cleaned = -0.0123817 Jy ! Component: 450 - total flux cleaned = -0.0119531 Jy ! Component: 500 - total flux cleaned = -0.011338 Jy ! Component: 550 - total flux cleaned = -0.0105472 Jy ! Component: 600 - total flux cleaned = -0.00920691 Jy ! Component: 650 - total flux cleaned = -0.00790834 Jy ! Component: 700 - total flux cleaned = -0.00683042 Jy ! Component: 750 - total flux cleaned = -0.0057796 Jy ! Component: 800 - total flux cleaned = -0.0042505 Jy ! Component: 850 - total flux cleaned = -0.00309519 Jy ! Component: 900 - total flux cleaned = -0.00196776 Jy ! Component: 950 - total flux cleaned = -0.000710701 Jy ! Component: 1000 - total flux cleaned = 0.000362639 Jy ! Component: 1050 - total flux cleaned = 0.00140976 Jy ! Component: 1100 - total flux cleaned = 0.00243433 Jy ! Component: 1150 - total flux cleaned = 0.00372104 Jy ! Component: 1200 - total flux cleaned = 0.00455852 Jy ! Component: 1250 - total flux cleaned = 0.00551722 Jy ! Component: 1300 - total flux cleaned = 0.00645459 Jy ! Component: 1350 - total flux cleaned = 0.00710813 Jy ! Component: 1400 - total flux cleaned = 0.00736512 Jy ! Component: 1450 - total flux cleaned = 0.00875576 Jy ! Component: 1500 - total flux cleaned = 0.00924836 Jy ! Component: 1550 - total flux cleaned = 0.0101026 Jy ! Component: 1600 - total flux cleaned = 0.0109379 Jy ! Component: 1650 - total flux cleaned = 0.0115246 Jy ! Component: 1700 - total flux cleaned = 0.0118706 Jy ! Component: 1750 - total flux cleaned = 0.0122113 Jy ! Component: 1800 - total flux cleaned = 0.0126573 Jy ! Component: 1850 - total flux cleaned = 0.0128759 Jy ! Component: 1900 - total flux cleaned = 0.0135232 Jy ! Component: 1950 - total flux cleaned = 0.0137352 Jy ! Component: 2000 - total flux cleaned = 0.0138383 Jy ! Component: 2050 - total flux cleaned = 0.0142533 Jy ! Component: 2100 - total flux cleaned = 0.0150692 Jy ! Component: 2150 - total flux cleaned = 0.0154703 Jy ! Component: 2200 - total flux cleaned = 0.0159652 Jy ! Component: 2250 - total flux cleaned = 0.0162595 Jy ! Component: 2300 - total flux cleaned = 0.0165503 Jy ! Component: 2350 - total flux cleaned = 0.0170269 Jy ! Component: 2400 - total flux cleaned = 0.0172149 Jy ! Component: 2450 - total flux cleaned = 0.0174948 Jy ! Component: 2500 - total flux cleaned = 0.0174956 Jy ! Component: 2550 - total flux cleaned = 0.017497 Jy ! Component: 2600 - total flux cleaned = 0.0175871 Jy ! Component: 2650 - total flux cleaned = 0.0176754 Jy ! Component: 2700 - total flux cleaned = 0.0176754 Jy ! Component: 2750 - total flux cleaned = 0.0176749 Jy ! Component: 2800 - total flux cleaned = 0.0175883 Jy ! Component: 2850 - total flux cleaned = 0.0178447 Jy ! Component: 2900 - total flux cleaned = 0.01776 Jy ! Component: 2950 - total flux cleaned = 0.0180115 Jy ! Component: 3000 - total flux cleaned = 0.0178437 Jy ! Component: 3050 - total flux cleaned = 0.018009 Jy ! Component: 3100 - total flux cleaned = 0.0182543 Jy ! Component: 3150 - total flux cleaned = 0.0184983 Jy ! Component: 3200 - total flux cleaned = 0.0185795 Jy ! Component: 3250 - total flux cleaned = 0.0189814 Jy ! Component: 3300 - total flux cleaned = 0.0192199 Jy ! Component: 3350 - total flux cleaned = 0.0194577 Jy ! Component: 3400 - total flux cleaned = 0.0196151 Jy ! Component: 3450 - total flux cleaned = 0.0199276 Jy ! Component: 3500 - total flux cleaned = 0.0200831 Jy ! Component: 3550 - total flux cleaned = 0.0200828 Jy ! Component: 3600 - total flux cleaned = 0.0203136 Jy ! Component: 3650 - total flux cleaned = 0.020466 Jy ! Component: 3700 - total flux cleaned = 0.0205416 Jy ! Component: 3750 - total flux cleaned = 0.0206925 Jy ! Component: 3800 - total flux cleaned = 0.0206176 Jy ! Component: 3850 - total flux cleaned = 0.0208418 Jy ! Component: 3900 - total flux cleaned = 0.0209162 Jy ! Component: 3950 - total flux cleaned = 0.0208425 Jy ! Component: 4000 - total flux cleaned = 0.0209896 Jy ! Component: 4050 - total flux cleaned = 0.0210632 Jy ! Total flux subtracted in 4096 components = 0.0212088 Jy ! Clean residual min=-0.004366 max=0.004086 Jy/beam ! Clean residual mean=0.000007 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 0.328288 Jy keep ! Adding 438 model components to the UV plane model. ! The established model now contains 480 components and 0.328288 Jy ![Exited script file: muppet] wmap "J0405-1308_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.759 x 10.56 at 19.07 degrees (North through East) ! Clean map min=-0.019183 max=0.32956 Jy/beam ! Writing clean map to FITS file: J0405-1308_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.329555 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00156573 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42531 1.42531 2.85063 5.70126 11.4025 22.805 45.6101 91.2201 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.329 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.759 x 10.56 at 19.07 degrees (North through East) ! Clean map min=-0.019183 max=0.32956 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0405-1308_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:03:59 2019