! Started logfile: J0405+3803_S_2017_01_21_pus_uvs.log on Sun May 5 15:45:54 2019 obs J0405+3803_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0405+3803_S_2017_01_21_pus_uva.fits ! AN table 1: 151 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.808867 visibilities/baseline/integration-bin. ! Found source: J0405+3803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 17588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0405+3803_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 408 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.825186Jy sigma=0.006873 ! Fit after self-cal, rms=0.805975Jy sigma=0.006710 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=5.35 mas, bpa=-5.123 degrees ! Estimated noise=1012.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159769 Jy ! Component: 100 - total flux cleaned = 0.24522 Jy ! Total flux subtracted in 100 components = 0.24522 Jy ! Clean residual min=-0.026486 max=0.061178 Jy/beam ! Clean residual mean=0.000108 rms=0.008231 Jy/beam ! Combined flux in latest and established models = 0.24522 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.24522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190695Jy sigma=0.001789 ! Fit after self-cal, rms=0.190169Jy sigma=0.001785 ! Inverting map ! Added new window around map position (19, 25.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633286 Jy ! Component: 100 - total flux cleaned = 0.107693 Jy ! Total flux subtracted in 100 components = 0.107693 Jy ! Clean residual min=-0.020360 max=0.049818 Jy/beam ! Clean residual mean=0.000095 rms=0.006392 Jy/beam ! Combined flux in latest and established models = 0.352913 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.352913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159022Jy sigma=0.001481 ! Fit after self-cal, rms=0.157410Jy sigma=0.001470 ! Inverting map ! Added new window around map position (4.5, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0482492 Jy ! Component: 100 - total flux cleaned = 0.0817136 Jy ! Total flux subtracted in 100 components = 0.0817136 Jy ! Clean residual min=-0.017733 max=0.022871 Jy/beam ! Clean residual mean=0.000081 rms=0.004926 Jy/beam ! Combined flux in latest and established models = 0.434627 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 55 components and 0.434627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136195Jy sigma=0.001251 ! Fit after self-cal, rms=0.135034Jy sigma=0.001242 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=5.823 mas, bpa=-9.006 degrees ! Estimated noise=675.304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478786 Jy ! Component: 100 - total flux cleaned = 0.0839698 Jy ! Component: 150 - total flux cleaned = 0.113206 Jy ! Component: 200 - total flux cleaned = 0.137532 Jy ! Total flux subtracted in 200 components = 0.137532 Jy ! Clean residual min=-0.021940 max=0.027895 Jy/beam ! Clean residual mean=0.000253 rms=0.006166 Jy/beam ! Combined flux in latest and established models = 0.572159 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 111 components and 0.572158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112508Jy sigma=0.000983 ! Fit after self-cal, rms=0.111587Jy sigma=0.000974 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.84 HN 0.96 LA 0.92 ! MK 1.00 NL 1.00 OV 1.04 PT 0.83 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.88 HN 0.98 LA 0.88 ! MK 1.05 NL 1.06 OV 1.08 PT 0.83 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.91 HN 0.95 LA 0.89 ! MK 1.11 NL 1.09 OV 0.99 PT 0.82 ! SC 1.07 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.94 HN 0.99 LA 0.98 ! MK 1.25 NL 1.00* OV 1.06 PT 0.83 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.111587Jy sigma=0.000974 ! Fit after self-cal, rms=0.106622Jy sigma=0.000845 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=6.006 mas, bpa=-9.164 degrees ! Estimated noise=646.615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210691 Jy ! Component: 100 - total flux cleaned = 0.0339696 Jy ! Component: 150 - total flux cleaned = 0.039371 Jy ! Component: 200 - total flux cleaned = 0.041528 Jy ! Total flux subtracted in 200 components = 0.041528 Jy ! Clean residual min=-0.010076 max=0.016685 Jy/beam ! Clean residual mean=0.000041 rms=0.003282 Jy/beam ! Combined flux in latest and established models = 0.613686 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 130 components and 0.613687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102564Jy sigma=0.000786 ! Fit after self-cal, rms=0.102193Jy sigma=0.000777 ! Inverting map ! Added new window around map position (13, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017445 Jy ! Component: 100 - total flux cleaned = 0.0271011 Jy ! Component: 150 - total flux cleaned = 0.0321951 Jy ! Component: 200 - total flux cleaned = 0.0335684 Jy ! Total flux subtracted in 200 components = 0.0335684 Jy ! Clean residual min=-0.008555 max=0.009277 Jy/beam ! Clean residual mean=0.000006 rms=0.002418 Jy/beam ! Combined flux in latest and established models = 0.647255 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 173 components and 0.647255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099455Jy sigma=0.000734 ! Fit after self-cal, rms=0.099068Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099068Jy sigma=0.000729 ! Fit after self-cal, rms=0.096400Jy sigma=0.000698 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=5.96 mas, bpa=-9.218 degrees ! Estimated noise=652.177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00723838 Jy ! Component: 100 - total flux cleaned = 0.0114393 Jy ! Component: 150 - total flux cleaned = 0.0127602 Jy ! Component: 200 - total flux cleaned = 0.0139284 Jy ! Total flux subtracted in 200 components = 0.0139284 Jy ! Clean residual min=-0.005547 max=0.006176 Jy/beam ! Clean residual mean=-0.000006 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.661183 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 211 components and 0.661183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095636Jy sigma=0.000690 ! Fit after self-cal, rms=0.095507Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, -85). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580036 Jy ! Component: 100 - total flux cleaned = 0.00824537 Jy ! Component: 150 - total flux cleaned = 0.0091743 Jy ! Component: 200 - total flux cleaned = 0.00989974 Jy ! Total flux subtracted in 200 components = 0.00989974 Jy ! Clean residual min=-0.004857 max=0.005168 Jy/beam ! Clean residual mean=-0.000000 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.671083 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 239 components and 0.671083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095002Jy sigma=0.000684 ! Fit after self-cal, rms=0.094956Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094956Jy sigma=0.000683 ! Fit after self-cal, rms=0.093849Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=5.969 mas, bpa=-9.205 degrees ! Estimated noise=650.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384794 Jy ! Component: 100 - total flux cleaned = 0.00639041 Jy ! Component: 150 - total flux cleaned = 0.00783787 Jy ! Component: 200 - total flux cleaned = 0.00922802 Jy ! Total flux subtracted in 200 components = 0.00922802 Jy ! Clean residual min=-0.004012 max=0.004507 Jy/beam ! Clean residual mean=0.000002 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.680311 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 256 components and 0.680311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093562Jy sigma=0.000679 ! Fit after self-cal, rms=0.093511Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25, 65). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419778 Jy ! Component: 100 - total flux cleaned = 0.00624561 Jy ! Component: 150 - total flux cleaned = 0.00783357 Jy ! Component: 200 - total flux cleaned = 0.00901054 Jy ! Total flux subtracted in 200 components = 0.00901054 Jy ! Clean residual min=-0.003554 max=0.003760 Jy/beam ! Clean residual mean=0.000005 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.689321 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 287 components and 0.689322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093223Jy sigma=0.000675 ! Fit after self-cal, rms=0.093199Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093199Jy sigma=0.000675 ! Fit after self-cal, rms=0.092573Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.304 mas, bmaj=9.317 mas, bpa=-8.027 degrees ! Estimated noise=763.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463679 Jy ! Component: 100 - total flux cleaned = 0.00805999 Jy ! Component: 150 - total flux cleaned = 0.00964822 Jy ! Component: 200 - total flux cleaned = 0.00994057 Jy ! Total flux subtracted in 200 components = 0.00994057 Jy ! Clean residual min=-0.004676 max=0.004098 Jy/beam ! Clean residual mean=0.000013 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.699262 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 317 components and 0.699262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092430Jy sigma=0.000673 ! Fit after self-cal, rms=0.092425Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187751 Jy ! Component: 100 - total flux cleaned = 0.00258155 Jy ! Component: 150 - total flux cleaned = 0.00297601 Jy ! Component: 200 - total flux cleaned = 0.00311873 Jy ! Total flux subtracted in 200 components = 0.00311873 Jy ! Clean residual min=-0.004210 max=0.004045 Jy/beam ! Clean residual mean=0.000007 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.702381 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 339 components and 0.702381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092371Jy sigma=0.000672 ! Fit after self-cal, rms=0.092362Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=5.977 mas, bpa=-9.154 degrees ! Estimated noise=649.127 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 5.977 at -9.154 degrees (North through East) ! Clean map min=-0.0036915 max=0.20577 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=5.466 mas, bpa=-5.097 degrees ! Estimated noise=993.209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152707 Jy ! Component: 100 - total flux cleaned = 0.244142 Jy ! Component: 150 - total flux cleaned = 0.308367 Jy ! Component: 200 - total flux cleaned = 0.356846 Jy ! Total flux subtracted in 200 components = 0.356846 Jy ! Clean residual min=-0.017480 max=0.028673 Jy/beam ! Clean residual mean=0.000055 rms=0.005372 Jy/beam ! Combined flux in latest and established models = 0.356846 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.356846 Jy ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=5.977 mas, bpa=-9.154 degrees ! Estimated noise=649.127 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575402 Jy ! Component: 100 - total flux cleaned = 0.101134 Jy ! Component: 150 - total flux cleaned = 0.136015 Jy ! Component: 200 - total flux cleaned = 0.164375 Jy ! Total flux subtracted in 200 components = 0.164375 Jy ! Clean residual min=-0.013413 max=0.018302 Jy/beam ! Clean residual mean=0.000116 rms=0.004489 Jy/beam ! Combined flux in latest and established models = 0.521221 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 82 components and 0.521221 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.304 mas, bmaj=9.317 mas, bpa=-8.027 degrees ! Estimated noise=763.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415184 Jy ! Component: 100 - total flux cleaned = 0.0695494 Jy ! Component: 150 - total flux cleaned = 0.0901805 Jy ! Component: 200 - total flux cleaned = 0.105836 Jy ! Total flux subtracted in 200 components = 0.105836 Jy ! Clean residual min=-0.011283 max=0.010368 Jy/beam ! Clean residual mean=0.000064 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.627057 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122216 Jy ! Component: 100 - total flux cleaned = 0.0222146 Jy ! Component: 150 - total flux cleaned = 0.030647 Jy ! Component: 200 - total flux cleaned = 0.0378001 Jy ! Total flux subtracted in 200 components = 0.0378001 Jy ! Clean residual min=-0.007400 max=0.006599 Jy/beam ! Clean residual mean=0.000022 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.664858 Jy ! Adding 129 model components to the UV plane model. ! The established model now contains 194 components and 0.664858 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=5.977 mas, bpa=-9.154 degrees ! Estimated noise=649.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499383 Jy ! Component: 100 - total flux cleaned = 0.00702557 Jy ! Component: 150 - total flux cleaned = 0.00904189 Jy ! Component: 200 - total flux cleaned = 0.0106923 Jy ! Total flux subtracted in 200 components = 0.0106923 Jy ! Clean residual min=-0.005758 max=0.008442 Jy/beam ! Clean residual mean=0.000006 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.67555 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 220 components and 0.67555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094726Jy sigma=0.000692 ! Fit after self-cal, rms=0.094319Jy sigma=0.000689 wmodel J0405+3803_S_2017_01_21_pus_map.mod ! Writing 220 model components to file: J0405+3803_S_2017_01_21_pus_map.mod wobs J0405+3803_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0405+3803_S_2017_01_21_pus_uvs.fits wwins J0405+3803_S_2017_01_21_pus_map.win ! wwins: Wrote 7 windows to J0405+3803_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030383 Jy ! Component: 100 - total flux cleaned = 0.00503722 Jy ! Component: 150 - total flux cleaned = 0.0057539 Jy ! Component: 200 - total flux cleaned = 0.00641051 Jy ! Component: 250 - total flux cleaned = 0.00664213 Jy ! Component: 300 - total flux cleaned = 0.0065675 Jy ! Component: 350 - total flux cleaned = 0.006496 Jy ! Component: 400 - total flux cleaned = 0.00649654 Jy ! Component: 450 - total flux cleaned = 0.00656339 Jy ! Component: 500 - total flux cleaned = 0.0066931 Jy ! Component: 550 - total flux cleaned = 0.00662836 Jy ! Component: 600 - total flux cleaned = 0.00662886 Jy ! Component: 650 - total flux cleaned = 0.00668965 Jy ! Component: 700 - total flux cleaned = 0.00668816 Jy ! Component: 750 - total flux cleaned = 0.00662892 Jy ! Component: 800 - total flux cleaned = 0.0065163 Jy ! Component: 850 - total flux cleaned = 0.00651773 Jy ! Component: 900 - total flux cleaned = 0.00662563 Jy ! Component: 950 - total flux cleaned = 0.00678424 Jy ! Component: 1000 - total flux cleaned = 0.00688749 Jy ! Component: 1050 - total flux cleaned = 0.00678419 Jy ! Component: 1100 - total flux cleaned = 0.00678528 Jy ! Component: 1150 - total flux cleaned = 0.00688316 Jy ! Component: 1200 - total flux cleaned = 0.00698033 Jy ! Component: 1250 - total flux cleaned = 0.00712181 Jy ! Component: 1300 - total flux cleaned = 0.00721462 Jy ! Component: 1350 - total flux cleaned = 0.00739753 Jy ! Component: 1400 - total flux cleaned = 0.00739754 Jy ! Component: 1450 - total flux cleaned = 0.00753168 Jy ! Component: 1500 - total flux cleaned = 0.00770444 Jy ! Component: 1550 - total flux cleaned = 0.00770439 Jy ! Component: 1600 - total flux cleaned = 0.00774664 Jy ! Component: 1650 - total flux cleaned = 0.0078296 Jy ! Component: 1700 - total flux cleaned = 0.00787085 Jy ! Component: 1750 - total flux cleaned = 0.00807179 Jy ! Component: 1800 - total flux cleaned = 0.00826931 Jy ! Component: 1850 - total flux cleaned = 0.00823031 Jy ! Component: 1900 - total flux cleaned = 0.00834594 Jy ! Component: 1950 - total flux cleaned = 0.00838384 Jy ! Component: 2000 - total flux cleaned = 0.0085714 Jy ! Component: 2050 - total flux cleaned = 0.00871982 Jy ! Component: 2100 - total flux cleaned = 0.00897414 Jy ! Component: 2150 - total flux cleaned = 0.00893803 Jy ! Component: 2200 - total flux cleaned = 0.00897427 Jy ! Component: 2250 - total flux cleaned = 0.009219 Jy ! Component: 2300 - total flux cleaned = 0.00921916 Jy ! Component: 2350 - total flux cleaned = 0.00928755 Jy ! Component: 2400 - total flux cleaned = 0.00922075 Jy ! Component: 2450 - total flux cleaned = 0.00928769 Jy ! Component: 2500 - total flux cleaned = 0.00925459 Jy ! Component: 2550 - total flux cleaned = 0.00938448 Jy ! Component: 2600 - total flux cleaned = 0.0093527 Jy ! Component: 2650 - total flux cleaned = 0.00941574 Jy ! Component: 2700 - total flux cleaned = 0.00944751 Jy ! Component: 2750 - total flux cleaned = 0.00932334 Jy ! Component: 2800 - total flux cleaned = 0.00947673 Jy ! Component: 2850 - total flux cleaned = 0.00938599 Jy ! Component: 2900 - total flux cleaned = 0.0093266 Jy ! Component: 2950 - total flux cleaned = 0.00941564 Jy ! Component: 3000 - total flux cleaned = 0.0094445 Jy ! Component: 3050 - total flux cleaned = 0.00947335 Jy ! Component: 3100 - total flux cleaned = 0.009387 Jy ! Component: 3150 - total flux cleaned = 0.00944427 Jy ! Component: 3200 - total flux cleaned = 0.00944432 Jy ! Component: 3250 - total flux cleaned = 0.009528 Jy ! Component: 3300 - total flux cleaned = 0.00947263 Jy ! Component: 3350 - total flux cleaned = 0.00941814 Jy ! Component: 3400 - total flux cleaned = 0.00939163 Jy ! Component: 3450 - total flux cleaned = 0.00944503 Jy ! Component: 3500 - total flux cleaned = 0.00941857 Jy ! Component: 3550 - total flux cleaned = 0.00941825 Jy ! Component: 3600 - total flux cleaned = 0.00926203 Jy ! Component: 3650 - total flux cleaned = 0.00918489 Jy ! Component: 3700 - total flux cleaned = 0.00931179 Jy ! Component: 3750 - total flux cleaned = 0.00918559 Jy ! Component: 3800 - total flux cleaned = 0.00913549 Jy ! Component: 3850 - total flux cleaned = 0.00908615 Jy ! Component: 3900 - total flux cleaned = 0.00913511 Jy ! Component: 3950 - total flux cleaned = 0.00906223 Jy ! Component: 4000 - total flux cleaned = 0.00910997 Jy ! Component: 4050 - total flux cleaned = 0.00906241 Jy ! Total flux subtracted in 4096 components = 0.00903879 Jy ! Clean residual min=-0.001184 max=0.001288 Jy/beam ! Clean residual mean=-0.000002 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.684589 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 479 components and 0.684589 Jy ![Exited script file: muppet] wmap "J0405+3803_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 5.977 at -9.154 degrees (North through East) ! Clean map min=-0.0028197 max=0.20548 Jy/beam ! Writing clean map to FITS file: J0405+3803_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.205476 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000427011 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.623446 0.623446 1.24689 2.49378 4.98757 9.97514 19.9503 39.9006 79.8011 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.205 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 5.977 at -9.154 degrees (North through East) ! Clean map min=-0.0028197 max=0.20548 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0405+3803_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:46:00 2019