! Started logfile: J0403-3605_S_2017_10_21_pus_uvs.log on Sat May 11 20:49:52 2019 obs J0403-3605_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0403-3605_S_2017_10_21_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.551282 visibilities/baseline/integration-bin. ! Found source: J0403-3605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 1032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0403-3605_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.345782Jy sigma=0.002303 ! Fit after self-cal, rms=0.276199Jy sigma=0.001734 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=30.06 mas, bpa=-21.95 degrees ! Estimated noise=4702.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.825199 Jy ! Component: 100 - total flux cleaned = 1.02248 Jy ! Total flux subtracted in 100 components = 1.02248 Jy ! Clean residual min=-0.067173 max=0.084539 Jy/beam ! Clean residual mean=-0.001721 rms=0.025087 Jy/beam ! Combined flux in latest and established models = 1.02248 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.02248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265315Jy sigma=0.001647 ! Fit after self-cal, rms=0.265267Jy sigma=0.001646 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=29.76 mas, bpa=-21.88 degrees ! Estimated noise=3572.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128636 Jy ! Component: 100 - total flux cleaned = 0.193897 Jy ! Component: 150 - total flux cleaned = 0.22838 Jy ! Component: 200 - total flux cleaned = 0.246354 Jy ! Total flux subtracted in 200 components = 0.246354 Jy ! Clean residual min=-0.036964 max=0.037405 Jy/beam ! Clean residual mean=-0.000935 rms=0.013165 Jy/beam ! Combined flux in latest and established models = 1.26883 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 78 components and 1.26883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185743Jy sigma=0.001144 ! Fit after self-cal, rms=0.185649Jy sigma=0.001144 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.11 ! LA 1.02 MK 0.99 NL 1.00* OV 0.98 ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.03 ! LA 0.95 MK 1.00 NL 1.04 OV 1.02 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.04 ! LA 0.75 MK 1.02 NL 1.20 OV 0.92 ! PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 1.00* KP 1.00* ! LA 0.79 MK 1.04 NL 1.00* OV 1.00* ! PT 1.04 ! ! ! Fit before self-cal, rms=0.185649Jy sigma=0.001144 ! Fit after self-cal, rms=0.106685Jy sigma=0.000718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=29.75 mas, bpa=-21.98 degrees ! Estimated noise=3590.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00400084 Jy ! Component: 100 - total flux cleaned = -0.00419579 Jy ! Component: 150 - total flux cleaned = -0.00387368 Jy ! Component: 200 - total flux cleaned = -0.00373427 Jy ! Total flux subtracted in 200 components = -0.00373427 Jy ! Clean residual min=-0.013154 max=0.010089 Jy/beam ! Clean residual mean=0.000046 rms=0.003254 Jy/beam ! Combined flux in latest and established models = 1.2651 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 1.2651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105895Jy sigma=0.000713 ! Fit after self-cal, rms=0.105776Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105776Jy sigma=0.000712 ! Fit after self-cal, rms=0.105740Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=29.74 mas, bpa=-21.98 degrees ! Estimated noise=3589.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00336945 Jy ! Component: 100 - total flux cleaned = -0.00352125 Jy ! Component: 150 - total flux cleaned = -0.00318894 Jy ! Component: 200 - total flux cleaned = -0.00318181 Jy ! Total flux subtracted in 200 components = -0.00318181 Jy ! Clean residual min=-0.012034 max=0.009699 Jy/beam ! Clean residual mean=0.000048 rms=0.003011 Jy/beam ! Combined flux in latest and established models = 1.26192 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 1.26192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105392Jy sigma=0.000709 ! Fit after self-cal, rms=0.105365Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000511829 Jy ! Component: 100 - total flux cleaned = 0.000514854 Jy ! Component: 150 - total flux cleaned = 0.000440018 Jy ! Component: 200 - total flux cleaned = 0.000442485 Jy ! Total flux subtracted in 200 components = 0.000442485 Jy ! Clean residual min=-0.011440 max=0.009957 Jy/beam ! Clean residual mean=0.000055 rms=0.002944 Jy/beam ! Combined flux in latest and established models = 1.26236 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 122 components and 1.26236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105220Jy sigma=0.000708 ! Fit after self-cal, rms=0.105205Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105205Jy sigma=0.000708 ! Fit after self-cal, rms=0.105227Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=29.74 mas, bpa=-21.98 degrees ! Estimated noise=3588.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00328431 Jy ! Component: 100 - total flux cleaned = -0.00338531 Jy ! Component: 150 - total flux cleaned = -0.00322236 Jy ! Component: 200 - total flux cleaned = -0.00307265 Jy ! Total flux subtracted in 200 components = -0.00307265 Jy ! Clean residual min=-0.010954 max=0.009406 Jy/beam ! Clean residual mean=0.000053 rms=0.002806 Jy/beam ! Combined flux in latest and established models = 1.25929 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 1.25929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105038Jy sigma=0.000706 ! Fit after self-cal, rms=0.105031Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104989 Jy ! Component: 100 - total flux cleaned = 0.000176133 Jy ! Component: 150 - total flux cleaned = 0.000176943 Jy ! Component: 200 - total flux cleaned = 0.000297748 Jy ! Total flux subtracted in 200 components = 0.000297748 Jy ! Clean residual min=-0.010747 max=0.009433 Jy/beam ! Clean residual mean=0.000056 rms=0.002770 Jy/beam ! Combined flux in latest and established models = 1.25958 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 1.25958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104932Jy sigma=0.000706 ! Fit after self-cal, rms=0.104923Jy sigma=0.000706 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104923Jy sigma=0.000706 ! Fit after self-cal, rms=0.104982Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.28 mas, bmaj=41.07 mas, bpa=-7.533 degrees ! Estimated noise=4331.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00357602 Jy ! Component: 100 - total flux cleaned = -0.00397764 Jy ! Component: 150 - total flux cleaned = -0.0038411 Jy ! Component: 200 - total flux cleaned = -0.00378101 Jy ! Total flux subtracted in 200 components = -0.00378101 Jy ! Clean residual min=-0.011057 max=0.009646 Jy/beam ! Clean residual mean=0.000083 rms=0.003185 Jy/beam ! Combined flux in latest and established models = 1.2558 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 166 components and 1.2558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104932Jy sigma=0.000705 ! Fit after self-cal, rms=0.104925Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154224 Jy ! Component: 100 - total flux cleaned = 6.14406e-05 Jy ! Component: 150 - total flux cleaned = 0.000215183 Jy ! Component: 200 - total flux cleaned = 0.000362611 Jy ! Total flux subtracted in 200 components = 0.000362611 Jy ! Clean residual min=-0.010758 max=0.009707 Jy/beam ! Clean residual mean=0.000091 rms=0.003141 Jy/beam ! Combined flux in latest and established models = 1.25617 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 170 components and 1.25617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104883Jy sigma=0.000705 ! Fit after self-cal, rms=0.104877Jy sigma=0.000705 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=29.75 mas, bpa=-21.99 degrees ! Estimated noise=3587.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 29.75 at -21.99 degrees (North through East) ! Clean map min=-0.020448 max=0.97226 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104877Jy sigma=0.000705 ! Fit after self-cal, rms=0.094728Jy sigma=0.000628 ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=29.74 mas, bpa=-21.98 degrees ! Estimated noise=3588.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181348 Jy ! Component: 100 - total flux cleaned = -0.00189663 Jy ! Component: 150 - total flux cleaned = -0.00204904 Jy ! Component: 200 - total flux cleaned = -0.00211743 Jy ! Total flux subtracted in 200 components = -0.00211743 Jy ! Clean residual min=-0.009585 max=0.008755 Jy/beam ! Clean residual mean=0.000045 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 1.25405 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 181 components and 1.25405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094544Jy sigma=0.000627 ! Fit after self-cal, rms=0.094535Jy sigma=0.000627 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278983 Jy ! Component: 100 - total flux cleaned = 0.000156689 Jy ! Component: 150 - total flux cleaned = 0.000100938 Jy ! Component: 200 - total flux cleaned = 9.97845e-05 Jy ! Total flux subtracted in 200 components = 9.97845e-05 Jy ! Clean residual min=-0.009462 max=0.008654 Jy/beam ! Clean residual mean=0.000046 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 1.25415 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 190 components and 1.25415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094446Jy sigma=0.000627 ! Fit after self-cal, rms=0.094439Jy sigma=0.000627 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094439Jy sigma=0.000627 ! Fit after self-cal, rms=0.094525Jy sigma=0.000627 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=30.2 mas, bpa=-22.11 degrees ! Estimated noise=4799.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.841491 Jy ! Component: 100 - total flux cleaned = 1.03304 Jy ! Component: 150 - total flux cleaned = 1.11299 Jy ! Component: 200 - total flux cleaned = 1.15963 Jy ! Total flux subtracted in 200 components = 1.15963 Jy ! Clean residual min=-0.016039 max=0.025832 Jy/beam ! Clean residual mean=-0.000545 rms=0.007047 Jy/beam ! Combined flux in latest and established models = 1.15963 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 1.15963 Jy ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=29.75 mas, bpa=-21.99 degrees ! Estimated noise=3588.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367136 Jy ! Component: 100 - total flux cleaned = 0.0561835 Jy ! Component: 150 - total flux cleaned = 0.0681519 Jy ! Component: 200 - total flux cleaned = 0.0761254 Jy ! Total flux subtracted in 200 components = 0.0761254 Jy ! Clean residual min=-0.009409 max=0.009188 Jy/beam ! Clean residual mean=-0.000054 rms=0.002942 Jy/beam ! Combined flux in latest and established models = 1.23575 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 103 components and 1.23575 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.3 mas, bmaj=41.09 mas, bpa=-7.503 degrees ! Estimated noise=4323.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498498 Jy ! Component: 100 - total flux cleaned = 0.00674921 Jy ! Component: 150 - total flux cleaned = 0.00810956 Jy ! Component: 200 - total flux cleaned = 0.00915658 Jy ! Total flux subtracted in 200 components = 0.00915658 Jy ! Clean residual min=-0.008803 max=0.009104 Jy/beam ! Clean residual mean=0.000015 rms=0.002989 Jy/beam ! Combined flux in latest and established models = 1.24491 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000647404 Jy ! Component: 100 - total flux cleaned = 0.00119751 Jy ! Component: 150 - total flux cleaned = 0.00135921 Jy ! Component: 200 - total flux cleaned = 0.00135894 Jy ! Total flux subtracted in 200 components = 0.00135894 Jy ! Clean residual min=-0.008597 max=0.009301 Jy/beam ! Clean residual mean=0.000038 rms=0.002857 Jy/beam ! Combined flux in latest and established models = 1.24627 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 139 components and 1.24627 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=29.75 mas, bpa=-21.99 degrees ! Estimated noise=3588.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002497 Jy ! Component: 100 - total flux cleaned = 0.000467106 Jy ! Component: 150 - total flux cleaned = 0.000753662 Jy ! Component: 200 - total flux cleaned = 0.00117087 Jy ! Total flux subtracted in 200 components = 0.00117087 Jy ! Clean residual min=-0.008829 max=0.009156 Jy/beam ! Clean residual mean=0.000033 rms=0.002410 Jy/beam ! Combined flux in latest and established models = 1.24744 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 156 components and 1.24744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094199Jy sigma=0.000626 ! Fit after self-cal, rms=0.094187Jy sigma=0.000626 wmodel J0403-3605_S_2017_10_21_pus_map.mod ! Writing 156 model components to file: J0403-3605_S_2017_10_21_pus_map.mod wobs J0403-3605_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0403-3605_S_2017_10_21_pus_uvs.fits wwins J0403-3605_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0403-3605_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000972162 Jy ! Component: 100 - total flux cleaned = 0.000970451 Jy ! Component: 150 - total flux cleaned = 0.000742977 Jy ! Component: 200 - total flux cleaned = 0.00117455 Jy ! Component: 250 - total flux cleaned = 0.00137411 Jy ! Component: 300 - total flux cleaned = 0.00193203 Jy ! Component: 350 - total flux cleaned = 0.00254179 Jy ! Component: 400 - total flux cleaned = 0.00311209 Jy ! Component: 450 - total flux cleaned = 0.00334732 Jy ! Component: 500 - total flux cleaned = 0.00304837 Jy ! Component: 550 - total flux cleaned = 0.00276014 Jy ! Component: 600 - total flux cleaned = 0.00227117 Jy ! Component: 650 - total flux cleaned = 0.00152242 Jy ! Component: 700 - total flux cleaned = 0.000726708 Jy ! Component: 750 - total flux cleaned = -5.15282e-05 Jy ! Component: 800 - total flux cleaned = -0.000938078 Jy ! Component: 850 - total flux cleaned = -0.00155784 Jy ! Component: 900 - total flux cleaned = -0.00234852 Jy ! Component: 950 - total flux cleaned = -0.00282689 Jy ! Component: 1000 - total flux cleaned = -0.00347651 Jy ! Component: 1050 - total flux cleaned = -0.00417915 Jy ! Component: 1100 - total flux cleaned = -0.00493283 Jy ! Component: 1150 - total flux cleaned = -0.00556599 Jy ! Component: 1200 - total flux cleaned = -0.00619431 Jy ! Component: 1250 - total flux cleaned = -0.00681738 Jy ! Component: 1300 - total flux cleaned = -0.00743601 Jy ! Component: 1350 - total flux cleaned = -0.00799464 Jy ! Component: 1400 - total flux cleaned = -0.00849538 Jy ! Component: 1450 - total flux cleaned = -0.00910392 Jy ! Component: 1500 - total flux cleaned = -0.00976494 Jy ! Component: 1550 - total flux cleaned = -0.010314 Jy ! Component: 1600 - total flux cleaned = -0.0110256 Jy ! Component: 1650 - total flux cleaned = -0.0117361 Jy ! Component: 1700 - total flux cleaned = -0.012446 Jy ! Component: 1750 - total flux cleaned = -0.013156 Jy ! Component: 1800 - total flux cleaned = -0.0140301 Jy ! Component: 1850 - total flux cleaned = -0.0147963 Jy ! Component: 1900 - total flux cleaned = -0.0154544 Jy ! Component: 1950 - total flux cleaned = -0.0160595 Jy ! Component: 2000 - total flux cleaned = -0.0167234 Jy ! Component: 2050 - total flux cleaned = -0.0173931 Jy ! Component: 2100 - total flux cleaned = -0.0180686 Jy ! Component: 2150 - total flux cleaned = -0.0187498 Jy ! Component: 2200 - total flux cleaned = -0.0194378 Jy ! Component: 2250 - total flux cleaned = -0.0201337 Jy ! Component: 2300 - total flux cleaned = -0.0208379 Jy ! Component: 2350 - total flux cleaned = -0.0214909 Jy ! Component: 2400 - total flux cleaned = -0.0222727 Jy ! Component: 2450 - total flux cleaned = -0.0230029 Jy ! Component: 2500 - total flux cleaned = -0.0237423 Jy ! Component: 2550 - total flux cleaned = -0.0245535 Jy ! Component: 2600 - total flux cleaned = -0.0252487 Jy ! Component: 2650 - total flux cleaned = -0.0259532 Jy ! Component: 2700 - total flux cleaned = -0.0267323 Jy ! Component: 2750 - total flux cleaned = -0.0274572 Jy ! Component: 2800 - total flux cleaned = -0.0282587 Jy ! Component: 2850 - total flux cleaned = -0.0289366 Jy ! Component: 2900 - total flux cleaned = -0.0296925 Jy ! Component: 2950 - total flux cleaned = -0.0303902 Jy ! Component: 3000 - total flux cleaned = -0.0309575 Jy ! Component: 3050 - total flux cleaned = -0.0316076 Jy ! Component: 3100 - total flux cleaned = -0.0322694 Jy ! Component: 3150 - total flux cleaned = -0.0329443 Jy ! Component: 3200 - total flux cleaned = -0.0336331 Jy ! Component: 3250 - total flux cleaned = -0.0343356 Jy ! Component: 3300 - total flux cleaned = -0.034972 Jy ! Component: 3350 - total flux cleaned = -0.0356211 Jy ! Component: 3400 - total flux cleaned = -0.0360349 Jy ! Component: 3450 - total flux cleaned = -0.0364567 Jy ! Component: 3500 - total flux cleaned = -0.0367166 Jy ! Component: 3550 - total flux cleaned = -0.0369833 Jy ! Component: 3600 - total flux cleaned = -0.037256 Jy ! Component: 3650 - total flux cleaned = -0.0375347 Jy ! Component: 3700 - total flux cleaned = -0.0377244 Jy ! Component: 3750 - total flux cleaned = -0.038113 Jy ! Component: 3800 - total flux cleaned = -0.0383123 Jy ! Component: 3850 - total flux cleaned = -0.0385171 Jy ! Component: 3900 - total flux cleaned = -0.038728 Jy ! Component: 3950 - total flux cleaned = -0.0389449 Jy ! Component: 4000 - total flux cleaned = -0.0389469 Jy ! Component: 4050 - total flux cleaned = -0.0390611 Jy ! Total flux subtracted in 4096 components = -0.0391788 Jy ! Clean residual min=-0.006283 max=0.006487 Jy/beam ! Clean residual mean=-0.000022 rms=0.001944 Jy/beam ! Combined flux in latest and established models = 1.20826 Jy keep ! Adding 171 model components to the UV plane model. ! The established model now contains 327 components and 1.20826 Jy ![Exited script file: muppet] wmap "J0403-3605_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.355 x 29.75 at -21.99 degrees (North through East) ! Clean map min=-0.0093524 max=1.0215 Jy/beam ! Writing clean map to FITS file: J0403-3605_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.0215 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00167284 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.491289 0.491289 0.982578 1.96516 3.93031 7.86063 15.7213 31.4425 62.885 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.005 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.021 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.355 x 29.75 at -21.99 degrees (North through East) ! Clean map min=-0.0093524 max=1.0215 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0403-3605_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:49:57 2019