! Started logfile: J0403-3605_S_2017_10_09_pus_uvs.log on Sun May 12 13:04:03 2019 obs J0403-3605_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0403-3605_S_2017_10_09_pus_uva.fits ! AN table 1: 39 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.641738 visibilities/baseline/integration-bin. ! Found source: J0403-3605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 3604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0403-3605_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.498123Jy sigma=0.003153 ! Fit after self-cal, rms=0.435726Jy sigma=0.002741 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.427 mas, bmaj=13.88 mas, bpa=-18.73 degrees ! Estimated noise=2666.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.637088 Jy ! Component: 100 - total flux cleaned = 0.877489 Jy ! Total flux subtracted in 100 components = 0.877489 Jy ! Clean residual min=-0.051609 max=0.113505 Jy/beam ! Clean residual mean=-0.001074 rms=0.018892 Jy/beam ! Combined flux in latest and established models = 0.877489 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.877489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369837Jy sigma=0.002240 ! Fit after self-cal, rms=0.369697Jy sigma=0.002239 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=16.07 mas, bpa=-17.93 degrees ! Estimated noise=2139.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184723 Jy ! Component: 100 - total flux cleaned = 0.285533 Jy ! Component: 150 - total flux cleaned = 0.345137 Jy ! Component: 200 - total flux cleaned = 0.365698 Jy ! Total flux subtracted in 200 components = 0.365698 Jy ! Clean residual min=-0.046200 max=0.068377 Jy/beam ! Clean residual mean=-0.000915 rms=0.014107 Jy/beam ! Combined flux in latest and established models = 1.24319 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 1.24319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251447Jy sigma=0.001577 ! Fit after self-cal, rms=0.251245Jy sigma=0.001576 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.86 HN 1.27 KP 1.05 ! LA 1.03 MK 0.96 NL 0.94 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.13 FD 0.92 HN 1.40 KP 0.99 ! LA 0.96 MK 0.95 NL 1.03 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.53 FD 0.98 HN 1.33 KP 0.86 ! LA 0.75 MK 0.96 NL 1.21 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.12 KP 1.00* ! LA 1.45 MK 1.01 NL 1.00* OV 1.00* ! PT 0.91 ! ! ! Fit before self-cal, rms=0.251245Jy sigma=0.001576 ! Fit after self-cal, rms=0.192046Jy sigma=0.000951 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=17.05 mas, bpa=-18.67 degrees ! Estimated noise=2246.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0118668 Jy ! Component: 100 - total flux cleaned = -0.0158878 Jy ! Component: 150 - total flux cleaned = -0.0190693 Jy ! Component: 200 - total flux cleaned = -0.0216208 Jy ! Total flux subtracted in 200 components = -0.0216208 Jy ! Clean residual min=-0.029632 max=0.025883 Jy/beam ! Clean residual mean=-0.000191 rms=0.006684 Jy/beam ! Combined flux in latest and established models = 1.22157 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 1.22157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179716Jy sigma=0.000896 ! Fit after self-cal, rms=0.179755Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179755Jy sigma=0.000895 ! Fit after self-cal, rms=0.182017Jy sigma=0.000845 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=17.32 mas, bpa=-18.95 degrees ! Estimated noise=2289.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00280234 Jy ! Component: 100 - total flux cleaned = -0.00565834 Jy ! Component: 150 - total flux cleaned = -0.00737009 Jy ! Component: 200 - total flux cleaned = -0.00877968 Jy ! Total flux subtracted in 200 components = -0.00877968 Jy ! Clean residual min=-0.025277 max=0.021424 Jy/beam ! Clean residual mean=-0.000158 rms=0.005498 Jy/beam ! Combined flux in latest and established models = 1.21279 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 1.21279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175685Jy sigma=0.000820 ! Fit after self-cal, rms=0.175685Jy sigma=0.000820 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152202 Jy ! Component: 100 - total flux cleaned = -0.00285237 Jy ! Component: 150 - total flux cleaned = -0.00396399 Jy ! Component: 200 - total flux cleaned = -0.00467416 Jy ! Total flux subtracted in 200 components = -0.00467416 Jy ! Clean residual min=-0.024179 max=0.020067 Jy/beam ! Clean residual mean=-0.000186 rms=0.005431 Jy/beam ! Combined flux in latest and established models = 1.20811 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 1.20811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174009Jy sigma=0.000816 ! Fit after self-cal, rms=0.173980Jy sigma=0.000815 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173980Jy sigma=0.000815 ! Fit after self-cal, rms=0.168430Jy sigma=0.000747 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=17.65 mas, bpa=-19.25 degrees ! Estimated noise=2322.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00961067 Jy ! Component: 100 - total flux cleaned = -0.0109754 Jy ! Component: 150 - total flux cleaned = -0.0117296 Jy ! Component: 200 - total flux cleaned = -0.0123897 Jy ! Total flux subtracted in 200 components = -0.0123897 Jy ! Clean residual min=-0.015593 max=0.012499 Jy/beam ! Clean residual mean=-0.000155 rms=0.003942 Jy/beam ! Combined flux in latest and established models = 1.19572 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 101 components and 1.19572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165069Jy sigma=0.000736 ! Fit after self-cal, rms=0.165093Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110475 Jy ! Component: 100 - total flux cleaned = -0.0016004 Jy ! Component: 150 - total flux cleaned = -0.0020394 Jy ! Component: 200 - total flux cleaned = -0.00243435 Jy ! Total flux subtracted in 200 components = -0.00243435 Jy ! Clean residual min=-0.015306 max=0.012786 Jy/beam ! Clean residual mean=-0.000171 rms=0.003899 Jy/beam ! Combined flux in latest and established models = 1.19329 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 118 components and 1.19329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164134Jy sigma=0.000733 ! Fit after self-cal, rms=0.164124Jy sigma=0.000732 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164124Jy sigma=0.000732 ! Fit after self-cal, rms=0.169217Jy sigma=0.000727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.084 mas, bmaj=33.58 mas, bpa=-4.39 degrees ! Estimated noise=2849.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00757955 Jy ! Component: 100 - total flux cleaned = -0.00850558 Jy ! Component: 150 - total flux cleaned = -0.00908434 Jy ! Component: 200 - total flux cleaned = -0.00926035 Jy ! Total flux subtracted in 200 components = -0.00926035 Jy ! Clean residual min=-0.018009 max=0.013429 Jy/beam ! Clean residual mean=-0.000285 rms=0.004599 Jy/beam ! Combined flux in latest and established models = 1.18403 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 128 components and 1.18403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167921Jy sigma=0.000725 ! Fit after self-cal, rms=0.167926Jy sigma=0.000724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.57294e-05 Jy ! Component: 100 - total flux cleaned = -0.000545923 Jy ! Component: 150 - total flux cleaned = -0.000813152 Jy ! Component: 200 - total flux cleaned = -0.000938945 Jy ! Total flux subtracted in 200 components = -0.000938945 Jy ! Clean residual min=-0.017642 max=0.013500 Jy/beam ! Clean residual mean=-0.000297 rms=0.004587 Jy/beam ! Combined flux in latest and established models = 1.18309 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 134 components and 1.18309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167546Jy sigma=0.000725 ! Fit after self-cal, rms=0.167553Jy sigma=0.000725 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=17.9 mas, bpa=-19.44 degrees ! Estimated noise=2342.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.095 x 17.9 at -19.44 degrees (North through East) ! Clean map min=-0.017996 max=0.7878 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167553Jy sigma=0.000725 ! Fit after self-cal, rms=0.164910Jy sigma=0.000653 ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=17.98 mas, bpa=-19.54 degrees ! Estimated noise=2358.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00587606 Jy ! Component: 100 - total flux cleaned = -0.0071841 Jy ! Component: 150 - total flux cleaned = -0.00831207 Jy ! Component: 200 - total flux cleaned = -0.00950134 Jy ! Total flux subtracted in 200 components = -0.00950134 Jy ! Clean residual min=-0.013011 max=0.011544 Jy/beam ! Clean residual mean=-0.000160 rms=0.003427 Jy/beam ! Combined flux in latest and established models = 1.17359 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 139 components and 1.17359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163195Jy sigma=0.000648 ! Fit after self-cal, rms=0.163173Jy sigma=0.000648 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000627135 Jy ! Component: 100 - total flux cleaned = -0.00137127 Jy ! Component: 150 - total flux cleaned = -0.00202104 Jy ! Component: 200 - total flux cleaned = -0.00259411 Jy ! Total flux subtracted in 200 components = -0.00259411 Jy ! Clean residual min=-0.012870 max=0.011849 Jy/beam ! Clean residual mean=-0.000176 rms=0.003421 Jy/beam ! Combined flux in latest and established models = 1.17099 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 147 components and 1.17099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162645Jy sigma=0.000646 ! Fit after self-cal, rms=0.162623Jy sigma=0.000646 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162623Jy sigma=0.000646 ! Fit after self-cal, rms=0.167161Jy sigma=0.000643 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.459 mas, bmaj=15.27 mas, bpa=-20.26 degrees ! Estimated noise=3095.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.712978 Jy ! Component: 100 - total flux cleaned = 0.898953 Jy ! Component: 150 - total flux cleaned = 0.983972 Jy ! Component: 200 - total flux cleaned = 1.03691 Jy ! Total flux subtracted in 200 components = 1.03691 Jy ! Clean residual min=-0.017645 max=0.033265 Jy/beam ! Clean residual mean=-0.000410 rms=0.006206 Jy/beam ! Combined flux in latest and established models = 1.03691 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 1.03691 Jy ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=18.15 mas, bpa=-19.66 degrees ! Estimated noise=2369.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0574597 Jy ! Component: 100 - total flux cleaned = 0.0876856 Jy ! Component: 150 - total flux cleaned = 0.104209 Jy ! Component: 200 - total flux cleaned = 0.108966 Jy ! Total flux subtracted in 200 components = 0.108966 Jy ! Clean residual min=-0.013979 max=0.018907 Jy/beam ! Clean residual mean=-0.000258 rms=0.003751 Jy/beam ! Combined flux in latest and established models = 1.14587 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 75 components and 1.14587 Jy ! Inverting map ! Added new window around map position (1, 35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130626 Jy ! Component: 100 - total flux cleaned = 0.0164074 Jy ! Component: 150 - total flux cleaned = 0.0175463 Jy ! Component: 200 - total flux cleaned = 0.0175472 Jy ! Total flux subtracted in 200 components = 0.0175472 Jy ! Clean residual min=-0.011001 max=0.012595 Jy/beam ! Clean residual mean=-0.000168 rms=0.002967 Jy/beam ! Combined flux in latest and established models = 1.16342 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 100 components and 1.16342 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.23 mas, bmaj=33.87 mas, bpa=-4.576 degrees ! Estimated noise=2841.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218212 Jy ! Component: 100 - total flux cleaned = 0.00218275 Jy ! Component: 150 - total flux cleaned = 0.00218922 Jy ! Component: 200 - total flux cleaned = 0.00218901 Jy ! Total flux subtracted in 200 components = 0.00218901 Jy ! Clean residual min=-0.011847 max=0.012925 Jy/beam ! Clean residual mean=-0.000288 rms=0.003595 Jy/beam ! Combined flux in latest and established models = 1.16561 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.27253e-06 Jy ! Component: 100 - total flux cleaned = 4.81206e-06 Jy ! Component: 150 - total flux cleaned = 0.000155267 Jy ! Component: 200 - total flux cleaned = 0.000155078 Jy ! Total flux subtracted in 200 components = 0.000155078 Jy ! Clean residual min=-0.011882 max=0.012442 Jy/beam ! Clean residual mean=-0.000289 rms=0.003522 Jy/beam ! Combined flux in latest and established models = 1.16577 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 131 components and 1.16577 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=18.15 mas, bpa=-19.66 degrees ! Estimated noise=2369.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140401 Jy ! Component: 100 - total flux cleaned = -0.000954296 Jy ! Component: 150 - total flux cleaned = -0.000541638 Jy ! Component: 200 - total flux cleaned = -0.000347355 Jy ! Total flux subtracted in 200 components = -0.000347355 Jy ! Clean residual min=-0.009870 max=0.010791 Jy/beam ! Clean residual mean=-0.000160 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 1.16542 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 1.16542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162962Jy sigma=0.000628 ! Fit after self-cal, rms=0.162659Jy sigma=0.000626 wmodel J0403-3605_S_2017_10_09_pus_map.mod ! Writing 154 model components to file: J0403-3605_S_2017_10_09_pus_map.mod wobs J0403-3605_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0403-3605_S_2017_10_09_pus_uvs.fits wwins J0403-3605_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0403-3605_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213109 Jy ! Component: 100 - total flux cleaned = -0.000940678 Jy ! Component: 150 - total flux cleaned = -0.00155802 Jy ! Component: 200 - total flux cleaned = -0.00273516 Jy ! Component: 250 - total flux cleaned = -0.00399942 Jy ! Component: 300 - total flux cleaned = -0.00481084 Jy ! Component: 350 - total flux cleaned = -0.0053323 Jy ! Component: 400 - total flux cleaned = -0.00571184 Jy ! Component: 450 - total flux cleaned = -0.00632692 Jy ! Component: 500 - total flux cleaned = -0.00692728 Jy ! Component: 550 - total flux cleaned = -0.00751561 Jy ! Component: 600 - total flux cleaned = -0.00809203 Jy ! Component: 650 - total flux cleaned = -0.00854392 Jy ! Component: 700 - total flux cleaned = -0.0093213 Jy ! Component: 750 - total flux cleaned = -0.00943043 Jy ! Component: 800 - total flux cleaned = -0.00975165 Jy ! Component: 850 - total flux cleaned = -0.0100687 Jy ! Component: 900 - total flux cleaned = -0.0105872 Jy ! Component: 950 - total flux cleaned = -0.010687 Jy ! Component: 1000 - total flux cleaned = -0.0106868 Jy ! Component: 1050 - total flux cleaned = -0.0108853 Jy ! Component: 1100 - total flux cleaned = -0.0108823 Jy ! Component: 1150 - total flux cleaned = -0.0105911 Jy ! Component: 1200 - total flux cleaned = -0.0104006 Jy ! Component: 1250 - total flux cleaned = -0.0100239 Jy ! Component: 1300 - total flux cleaned = -0.00955888 Jy ! Component: 1350 - total flux cleaned = -0.00910099 Jy ! Component: 1400 - total flux cleaned = -0.00910154 Jy ! Component: 1450 - total flux cleaned = -0.00856581 Jy ! Component: 1500 - total flux cleaned = -0.00847773 Jy ! Component: 1550 - total flux cleaned = -0.00830329 Jy ! Component: 1600 - total flux cleaned = -0.00839011 Jy ! Component: 1650 - total flux cleaned = -0.0082186 Jy ! Component: 1700 - total flux cleaned = -0.00821788 Jy ! Component: 1750 - total flux cleaned = -0.00821907 Jy ! Component: 1800 - total flux cleaned = -0.00813632 Jy ! Component: 1850 - total flux cleaned = -0.00789268 Jy ! Component: 1900 - total flux cleaned = -0.00773122 Jy ! Component: 1950 - total flux cleaned = -0.00749167 Jy ! Component: 2000 - total flux cleaned = -0.00741144 Jy ! Component: 2050 - total flux cleaned = -0.007019 Jy ! Component: 2100 - total flux cleaned = -0.00655449 Jy ! Component: 2150 - total flux cleaned = -0.00655367 Jy ! Component: 2200 - total flux cleaned = -0.00625045 Jy ! Component: 2250 - total flux cleaned = -0.00640143 Jy ! Component: 2300 - total flux cleaned = -0.00640284 Jy ! Component: 2350 - total flux cleaned = -0.00669818 Jy ! Component: 2400 - total flux cleaned = -0.00625987 Jy ! Component: 2450 - total flux cleaned = -0.00654942 Jy ! Component: 2500 - total flux cleaned = -0.00669299 Jy ! Component: 2550 - total flux cleaned = -0.00669248 Jy ! Component: 2600 - total flux cleaned = -0.00662317 Jy ! Component: 2650 - total flux cleaned = -0.00655357 Jy ! Component: 2700 - total flux cleaned = -0.00655292 Jy ! Component: 2750 - total flux cleaned = -0.00621103 Jy ! Component: 2800 - total flux cleaned = -0.00607433 Jy ! Component: 2850 - total flux cleaned = -0.00600828 Jy ! Component: 2900 - total flux cleaned = -0.00574122 Jy ! Component: 2950 - total flux cleaned = -0.00600594 Jy ! Component: 3000 - total flux cleaned = -0.00561116 Jy ! Component: 3050 - total flux cleaned = -0.00528534 Jy ! Component: 3100 - total flux cleaned = -0.00509136 Jy ! Component: 3150 - total flux cleaned = -0.0047068 Jy ! Component: 3200 - total flux cleaned = -0.00451688 Jy ! Component: 3250 - total flux cleaned = -0.00420154 Jy ! Component: 3300 - total flux cleaned = -0.00382696 Jy ! Component: 3350 - total flux cleaned = -0.00339327 Jy ! Component: 3400 - total flux cleaned = -0.00308591 Jy ! Component: 3450 - total flux cleaned = -0.00271967 Jy ! Component: 3500 - total flux cleaned = -0.00247767 Jy ! Component: 3550 - total flux cleaned = -0.00199664 Jy ! Component: 3600 - total flux cleaned = -0.00193689 Jy ! Component: 3650 - total flux cleaned = -0.00152211 Jy ! Component: 3700 - total flux cleaned = -0.00122841 Jy ! Component: 3750 - total flux cleaned = -0.000878211 Jy ! Component: 3800 - total flux cleaned = -0.00047217 Jy ! Component: 3850 - total flux cleaned = -0.000241931 Jy ! Component: 3900 - total flux cleaned = 0.00027144 Jy ! Component: 3950 - total flux cleaned = 0.000497722 Jy ! Component: 4000 - total flux cleaned = 0.000836212 Jy ! Component: 4050 - total flux cleaned = 0.00133966 Jy ! Total flux subtracted in 4096 components = 0.00156149 Jy ! Clean residual min=-0.003057 max=0.003112 Jy/beam ! Clean residual mean=0.000007 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 1.16698 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 427 components and 1.16698 Jy ![Exited script file: muppet] wmap "J0403-3605_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.128 x 18.15 at -19.66 degrees (North through East) ! Clean map min=-0.014076 max=0.86871 Jy/beam ! Writing clean map to FITS file: J0403-3605_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.868714 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00111157 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.383868 0.383868 0.767735 1.53547 3.07094 6.14188 12.2838 24.5675 49.1351 98.2701 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.868 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.128 x 18.15 at -19.66 degrees (North through East) ! Clean map min=-0.014076 max=0.86871 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0403-3605_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:04:08 2019