! Started logfile: J0403-3605_S_2017_07_09_pus_uvs.log on Wed May 8 14:41:25 2019 obs J0403-3605_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0403-3605_S_2017_07_09_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.433333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0403-3605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0403-3605_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.398207Jy sigma=0.002837 ! Fit after self-cal, rms=0.194135Jy sigma=0.001335 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.311 mas, bmaj=6.72 mas, bpa=3.987 degrees ! Estimated noise=4928.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.836742 Jy ! Component: 100 - total flux cleaned = 1.03688 Jy ! Total flux subtracted in 100 components = 1.03688 Jy ! Clean residual min=-0.038167 max=0.076387 Jy/beam ! Clean residual mean=-0.001718 rms=0.014374 Jy/beam ! Combined flux in latest and established models = 1.03688 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.03688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167960Jy sigma=0.001135 ! Fit after self-cal, rms=0.167743Jy sigma=0.001134 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.712 mas, bmaj=7.602 mas, bpa=0.2776 degrees ! Estimated noise=3720.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0920778 Jy ! Component: 100 - total flux cleaned = 0.133353 Jy ! Component: 150 - total flux cleaned = 0.153764 Jy ! Component: 200 - total flux cleaned = 0.163963 Jy ! Total flux subtracted in 200 components = 0.163963 Jy ! Clean residual min=-0.016016 max=0.019229 Jy/beam ! Clean residual mean=-0.000650 rms=0.004871 Jy/beam ! Combined flux in latest and established models = 1.20085 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.20085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112058Jy sigma=0.000754 ! Fit after self-cal, rms=0.111964Jy sigma=0.000753 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.03 ! LA 1.03 MK 1.00 NL 1.00* OV 1.03 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.99 ! LA 0.97 MK 1.01 NL 1.00* OV 1.05 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.98 ! LA 0.93 MK 1.02 NL 1.00* OV 0.95 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.111964Jy sigma=0.000753 ! Fit after self-cal, rms=0.094660Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.68 mas, bpa=1.144 degrees ! Estimated noise=3800.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179585 Jy ! Component: 100 - total flux cleaned = 0.00150913 Jy ! Component: 150 - total flux cleaned = 0.00134791 Jy ! Component: 200 - total flux cleaned = 0.00135283 Jy ! Total flux subtracted in 200 components = 0.00135283 Jy ! Clean residual min=-0.009271 max=0.011455 Jy/beam ! Clean residual mean=0.000001 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 1.2022 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 1.2022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094476Jy sigma=0.000657 ! Fit after self-cal, rms=0.094434Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094434Jy sigma=0.000657 ! Fit after self-cal, rms=0.094358Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=7.676 mas, bpa=1.159 degrees ! Estimated noise=3799.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000905239 Jy ! Component: 100 - total flux cleaned = 0.000655197 Jy ! Component: 150 - total flux cleaned = 0.000599192 Jy ! Component: 200 - total flux cleaned = 0.000598516 Jy ! Total flux subtracted in 200 components = 0.000598516 Jy ! Clean residual min=-0.009172 max=0.010999 Jy/beam ! Clean residual mean=0.000003 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 1.2028 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 1.2028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094285Jy sigma=0.000656 ! Fit after self-cal, rms=0.094269Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.84623e-05 Jy ! Component: 100 - total flux cleaned = -9.96039e-05 Jy ! Component: 150 - total flux cleaned = -0.000150298 Jy ! Component: 200 - total flux cleaned = -0.000148601 Jy ! Total flux subtracted in 200 components = -0.000148601 Jy ! Clean residual min=-0.009093 max=0.010757 Jy/beam ! Clean residual mean=0.000002 rms=0.002661 Jy/beam ! Combined flux in latest and established models = 1.20265 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 1.20265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094223Jy sigma=0.000655 ! Fit after self-cal, rms=0.094210Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094210Jy sigma=0.000655 ! Fit after self-cal, rms=0.094180Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=7.675 mas, bpa=1.163 degrees ! Estimated noise=3798.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227208 Jy ! Component: 100 - total flux cleaned = 0.000128115 Jy ! Component: 150 - total flux cleaned = 3.65548e-05 Jy ! Component: 200 - total flux cleaned = 3.64729e-05 Jy ! Total flux subtracted in 200 components = 3.64729e-05 Jy ! Clean residual min=-0.008991 max=0.010525 Jy/beam ! Clean residual mean=0.000003 rms=0.002634 Jy/beam ! Combined flux in latest and established models = 1.20268 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 1.20268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094139Jy sigma=0.000655 ! Fit after self-cal, rms=0.094126Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.24847e-06 Jy ! Component: 100 - total flux cleaned = -5.76052e-06 Jy ! Component: 150 - total flux cleaned = -1.04197e-05 Jy ! Component: 200 - total flux cleaned = -5.32094e-05 Jy ! Total flux subtracted in 200 components = -5.32094e-05 Jy ! Clean residual min=-0.008897 max=0.010354 Jy/beam ! Clean residual mean=0.000002 rms=0.002609 Jy/beam ! Combined flux in latest and established models = 1.20263 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 1.20263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094088Jy sigma=0.000655 ! Fit after self-cal, rms=0.094077Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094077Jy sigma=0.000655 ! Fit after self-cal, rms=0.094063Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.853 mas, bmaj=28.57 mas, bpa=4.395 degrees ! Estimated noise=5234.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199271 Jy ! Component: 100 - total flux cleaned = -0.000199393 Jy ! Component: 150 - total flux cleaned = -0.000197775 Jy ! Component: 200 - total flux cleaned = -0.000195721 Jy ! Total flux subtracted in 200 components = -0.000195721 Jy ! Clean residual min=-0.008232 max=0.008072 Jy/beam ! Clean residual mean=0.000004 rms=0.003075 Jy/beam ! Combined flux in latest and established models = 1.20244 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 35 components and 1.20244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094052Jy sigma=0.000655 ! Fit after self-cal, rms=0.094054Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.67939e-06 Jy ! Component: 100 - total flux cleaned = -1.53865e-05 Jy ! Component: 150 - total flux cleaned = -1.69334e-05 Jy ! Component: 200 - total flux cleaned = -1.72997e-05 Jy ! Total flux subtracted in 200 components = -1.72997e-05 Jy ! Clean residual min=-0.008193 max=0.007946 Jy/beam ! Clean residual mean=0.000004 rms=0.003053 Jy/beam ! Combined flux in latest and established models = 1.20242 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 36 components and 1.20242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094065Jy sigma=0.000655 ! Fit after self-cal, rms=0.094068Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=7.675 mas, bpa=1.163 degrees ! Estimated noise=3797.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.723 x 7.675 at 1.163 degrees (North through East) ! Clean map min=-0.0084474 max=1.0525 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094068Jy sigma=0.000655 ! Fit after self-cal, rms=0.085759Jy sigma=0.000597 ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=7.673 mas, bpa=1.179 degrees ! Estimated noise=3795.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000412936 Jy ! Component: 100 - total flux cleaned = -0.000414212 Jy ! Component: 150 - total flux cleaned = -0.000413776 Jy ! Component: 200 - total flux cleaned = -0.000411681 Jy ! Total flux subtracted in 200 components = -0.000411681 Jy ! Clean residual min=-0.008840 max=0.009524 Jy/beam ! Clean residual mean=0.000001 rms=0.002575 Jy/beam ! Combined flux in latest and established models = 1.20201 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 1.20201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085697Jy sigma=0.000597 ! Fit after self-cal, rms=0.085684Jy sigma=0.000597 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.5421e-07 Jy ! Component: 100 - total flux cleaned = 9.44568e-05 Jy ! Component: 150 - total flux cleaned = 0.000137022 Jy ! Component: 200 - total flux cleaned = 0.000136486 Jy ! Total flux subtracted in 200 components = 0.000136486 Jy ! Clean residual min=-0.008699 max=0.009501 Jy/beam ! Clean residual mean=0.000002 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 1.20214 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 1.20214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085645Jy sigma=0.000596 ! Fit after self-cal, rms=0.085636Jy sigma=0.000596 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085636Jy sigma=0.000596 ! Fit after self-cal, rms=0.085622Jy sigma=0.000596 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=6.803 mas, bpa=4.64 degrees ! Estimated noise=5017.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.835833 Jy ! Component: 100 - total flux cleaned = 1.03622 Jy ! Component: 150 - total flux cleaned = 1.10968 Jy ! Component: 200 - total flux cleaned = 1.14668 Jy ! Total flux subtracted in 200 components = 1.14668 Jy ! Clean residual min=-0.017088 max=0.021578 Jy/beam ! Clean residual mean=-0.000406 rms=0.005312 Jy/beam ! Combined flux in latest and established models = 1.14668 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.14668 Jy ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=7.673 mas, bpa=1.183 degrees ! Estimated noise=3794.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302266 Jy ! Component: 100 - total flux cleaned = 0.0454965 Jy ! Component: 150 - total flux cleaned = 0.0535527 Jy ! Component: 200 - total flux cleaned = 0.0582151 Jy ! Total flux subtracted in 200 components = 0.0582151 Jy ! Clean residual min=-0.009148 max=0.007593 Jy/beam ! Clean residual mean=0.000014 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 1.2049 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 48 components and 1.2049 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.851 mas, bmaj=28.57 mas, bpa=4.408 degrees ! Estimated noise=5232.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276927 Jy ! Component: 100 - total flux cleaned = 0.00335029 Jy ! Component: 150 - total flux cleaned = 0.00347305 Jy ! Component: 200 - total flux cleaned = 0.0035869 Jy ! Total flux subtracted in 200 components = 0.0035869 Jy ! Clean residual min=-0.007463 max=0.007152 Jy/beam ! Clean residual mean=0.000090 rms=0.002638 Jy/beam ! Combined flux in latest and established models = 1.20849 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.97544e-05 Jy ! Component: 100 - total flux cleaned = 0.000168935 Jy ! Component: 150 - total flux cleaned = 0.000229942 Jy ! Component: 200 - total flux cleaned = 0.00031675 Jy ! Total flux subtracted in 200 components = 0.00031675 Jy ! Clean residual min=-0.007469 max=0.007018 Jy/beam ! Clean residual mean=0.000097 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 1.2088 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 1.2088 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=7.673 mas, bpa=1.183 degrees ! Estimated noise=3794.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.68767e-06 Jy ! Component: 100 - total flux cleaned = -8.78236e-05 Jy ! Component: 150 - total flux cleaned = -8.95768e-05 Jy ! Component: 200 - total flux cleaned = -0.000165596 Jy ! Total flux subtracted in 200 components = -0.000165596 Jy ! Clean residual min=-0.008114 max=0.007204 Jy/beam ! Clean residual mean=0.000044 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 1.20864 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 1.20864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085032Jy sigma=0.000592 ! Fit after self-cal, rms=0.084984Jy sigma=0.000591 wmodel J0403-3605_S_2017_07_09_pus_map.mod ! Writing 78 model components to file: J0403-3605_S_2017_07_09_pus_map.mod wobs J0403-3605_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0403-3605_S_2017_07_09_pus_uvs.fits wwins J0403-3605_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J0403-3605_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160164 Jy ! Component: 100 - total flux cleaned = -0.00184341 Jy ! Component: 150 - total flux cleaned = -0.00161902 Jy ! Component: 200 - total flux cleaned = -0.00131148 Jy ! Component: 250 - total flux cleaned = -0.00169248 Jy ! Component: 300 - total flux cleaned = -0.00160352 Jy ! Component: 350 - total flux cleaned = -0.00177184 Jy ! Component: 400 - total flux cleaned = -0.00193167 Jy ! Component: 450 - total flux cleaned = -0.00223464 Jy ! Component: 500 - total flux cleaned = -0.00231138 Jy ! Component: 550 - total flux cleaned = -0.00259572 Jy ! Component: 600 - total flux cleaned = -0.00246186 Jy ! Component: 650 - total flux cleaned = -0.00226491 Jy ! Component: 700 - total flux cleaned = -0.00213666 Jy ! Component: 750 - total flux cleaned = -0.00194942 Jy ! Component: 800 - total flux cleaned = -0.00164679 Jy ! Component: 850 - total flux cleaned = -0.0014126 Jy ! Component: 900 - total flux cleaned = -0.00135465 Jy ! Component: 950 - total flux cleaned = -0.00107579 Jy ! Component: 1000 - total flux cleaned = -0.000967857 Jy ! Component: 1050 - total flux cleaned = -0.000914506 Jy ! Component: 1100 - total flux cleaned = -0.000861949 Jy ! Component: 1150 - total flux cleaned = -0.000660378 Jy ! Component: 1200 - total flux cleaned = -0.000612264 Jy ! Component: 1250 - total flux cleaned = -0.000468046 Jy ! Component: 1300 - total flux cleaned = -0.000420745 Jy ! Component: 1350 - total flux cleaned = -0.000327436 Jy ! Component: 1400 - total flux cleaned = -0.000189957 Jy ! Component: 1450 - total flux cleaned = -9.895e-05 Jy ! Component: 1500 - total flux cleaned = -8.67916e-06 Jy ! Component: 1550 - total flux cleaned = 0.000124723 Jy ! Component: 1600 - total flux cleaned = 0.000212607 Jy ! Component: 1650 - total flux cleaned = 0.000342964 Jy ! Component: 1700 - total flux cleaned = 0.000343107 Jy ! Component: 1750 - total flux cleaned = 0.000428852 Jy ! Component: 1800 - total flux cleaned = 0.000513426 Jy ! Component: 1850 - total flux cleaned = 0.000554818 Jy ! Component: 1900 - total flux cleaned = 0.000637703 Jy ! Component: 1950 - total flux cleaned = 0.000720196 Jy ! Component: 2000 - total flux cleaned = 0.00076116 Jy ! Component: 2050 - total flux cleaned = 0.000843323 Jy ! Component: 2100 - total flux cleaned = 0.000884409 Jy ! Component: 2150 - total flux cleaned = 0.000925312 Jy ! Component: 2200 - total flux cleaned = 0.000966104 Jy ! Component: 2250 - total flux cleaned = 0.00096629 Jy ! Component: 2300 - total flux cleaned = 0.000966598 Jy ! Component: 2350 - total flux cleaned = 0.00104909 Jy ! Component: 2400 - total flux cleaned = 0.00113168 Jy ! Component: 2450 - total flux cleaned = 0.00125711 Jy ! Component: 2500 - total flux cleaned = 0.00134159 Jy ! Component: 2550 - total flux cleaned = 0.00138393 Jy ! Component: 2600 - total flux cleaned = 0.00151186 Jy ! Component: 2650 - total flux cleaned = 0.00159805 Jy ! Component: 2700 - total flux cleaned = 0.00168548 Jy ! Component: 2750 - total flux cleaned = 0.00172926 Jy ! Component: 2800 - total flux cleaned = 0.001818 Jy ! Component: 2850 - total flux cleaned = 0.00186241 Jy ! Component: 2900 - total flux cleaned = 0.0019528 Jy ! Component: 2950 - total flux cleaned = 0.00204366 Jy ! Component: 3000 - total flux cleaned = 0.00218174 Jy ! Component: 3050 - total flux cleaned = 0.00227428 Jy ! Component: 3100 - total flux cleaned = 0.00232113 Jy ! Component: 3150 - total flux cleaned = 0.00232102 Jy ! Component: 3200 - total flux cleaned = 0.0023201 Jy ! Component: 3250 - total flux cleaned = 0.00227028 Jy ! Component: 3300 - total flux cleaned = 0.00231974 Jy ! Component: 3350 - total flux cleaned = 0.00226917 Jy ! Component: 3400 - total flux cleaned = 0.00221851 Jy ! Component: 3450 - total flux cleaned = 0.00221838 Jy ! Component: 3500 - total flux cleaned = 0.00227143 Jy ! Component: 3550 - total flux cleaned = 0.00216553 Jy ! Component: 3600 - total flux cleaned = 0.0021112 Jy ! Component: 3650 - total flux cleaned = 0.00211056 Jy ! Component: 3700 - total flux cleaned = 0.00199864 Jy ! Component: 3750 - total flux cleaned = 0.00199854 Jy ! Component: 3800 - total flux cleaned = 0.0018259 Jy ! Component: 3850 - total flux cleaned = 0.00165036 Jy ! Component: 3900 - total flux cleaned = 0.001472 Jy ! Component: 3950 - total flux cleaned = 0.0013506 Jy ! Component: 4000 - total flux cleaned = 0.00116588 Jy ! Component: 4050 - total flux cleaned = 0.00103973 Jy ! Total flux subtracted in 4096 components = 0.00091214 Jy ! Clean residual min=-0.004047 max=0.003672 Jy/beam ! Clean residual mean=0.000020 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 1.20955 Jy keep ! Adding 194 model components to the UV plane model. ! The established model now contains 272 components and 1.20955 Jy ![Exited script file: muppet] wmap "J0403-3605_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.723 x 7.673 at 1.183 degrees (North through East) ! Clean map min=-0.0058275 max=1.0628 Jy/beam ! Writing clean map to FITS file: J0403-3605_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.06283 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010043 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.28348 0.28348 0.56696 1.13392 2.26784 4.53568 9.07135 18.1427 36.2854 72.5708 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.723 x 7.673 at 1.183 degrees (North through East) ! Clean map min=-0.0058275 max=1.0628 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0403-3605_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:41:31 2019