! Started logfile: J0403-3605_S_2017_04_28_pus_uvs.log on Thu May 2 16:15:54 2019 obs J0403-3605_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0403-3605_S_2017_04_28_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.742222 visibilities/baseline/integration-bin. ! Found source: J0403-3605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0403-3605_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.371076Jy sigma=0.347460 ! Fit after self-cal, rms=0.354158Jy sigma=0.347574 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=11.31 mas, bpa=-0.4813 degrees ! Estimated noise=819.866 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147089 Jy ! Component: 100 - total flux cleaned = 0.184189 Jy ! Total flux subtracted in 100 components = 0.184189 Jy ! Clean residual min=-0.087629 max=0.100302 Jy/beam ! Clean residual mean=0.000477 rms=0.032593 Jy/beam ! Combined flux in latest and established models = 0.184189 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.184189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.959202Jy sigma=0.029183 ! Fit after self-cal, rms=0.959123Jy sigma=0.029170 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.174 mas, bmaj=15.46 mas, bpa=6.55 degrees ! Estimated noise=502.132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412924 Jy ! Component: 100 - total flux cleaned = 0.0666422 Jy ! Component: 150 - total flux cleaned = 0.0887808 Jy ! Component: 200 - total flux cleaned = 0.10825 Jy ! Total flux subtracted in 200 components = 0.10825 Jy ! Clean residual min=-0.073059 max=0.080821 Jy/beam ! Clean residual mean=0.001327 rms=0.032031 Jy/beam ! Combined flux in latest and established models = 0.292439 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.292439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.891220Jy sigma=0.023036 ! Fit after self-cal, rms=0.891216Jy sigma=0.023033 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.42 FD 0.39 HN 1.00* KP 0.48 ! LA 0.48 MK 0.77 NL 0.53 OV 0.38 ! PT 0.53 SC 0.70 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.47 FD 0.36 HN 1.00* KP 0.45 ! LA 0.46 MK 0.76 NL 0.67 OV 0.38 ! PT 0.54 SC 0.71 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.49 FD 0.38 HN 1.00* KP 0.49 ! LA 0.47 MK 0.77 NL 0.65 OV 0.33 ! PT 0.51 SC 0.72 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 92.01 FD 0.38 HN 1.00* KP 1.00* ! LA 21.90 MK 0.73 NL 1.00* OV 1.00* ! PT 0.57 SC 1.00* ! ! ! Fit before self-cal, rms=0.891216Jy sigma=0.023033 ! Fit after self-cal, rms=0.195351Jy sigma=0.002205 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=9.273 mas, bpa=8.83 degrees ! Estimated noise=1174.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106636 Jy ! Component: 100 - total flux cleaned = 0.00455585 Jy ! Component: 150 - total flux cleaned = -0.000394525 Jy ! Component: 200 - total flux cleaned = -0.00443642 Jy ! Total flux subtracted in 200 components = -0.00443642 Jy ! Clean residual min=-0.032531 max=0.023074 Jy/beam ! Clean residual mean=0.000006 rms=0.007296 Jy/beam ! Combined flux in latest and established models = 0.288002 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.288002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167823Jy sigma=0.001474 ! Fit after self-cal, rms=0.164163Jy sigma=0.001462 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164163Jy sigma=0.001462 ! Fit after self-cal, rms=0.068570Jy sigma=0.001300 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.578 mas, bmaj=9.228 mas, bpa=8.09 degrees ! Estimated noise=1121.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0037055 Jy ! Component: 100 - total flux cleaned = -0.00596169 Jy ! Component: 150 - total flux cleaned = -0.00833823 Jy ! Component: 200 - total flux cleaned = -0.010013 Jy ! Total flux subtracted in 200 components = -0.010013 Jy ! Clean residual min=-0.020048 max=0.013164 Jy/beam ! Clean residual mean=-0.000052 rms=0.004464 Jy/beam ! Combined flux in latest and established models = 0.277989 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.277989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062023Jy sigma=0.001075 ! Fit after self-cal, rms=0.062035Jy sigma=0.001074 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188663 Jy ! Component: 100 - total flux cleaned = -0.0032369 Jy ! Component: 150 - total flux cleaned = -0.00447658 Jy ! Component: 200 - total flux cleaned = -0.00533938 Jy ! Total flux subtracted in 200 components = -0.00533938 Jy ! Clean residual min=-0.017126 max=0.012988 Jy/beam ! Clean residual mean=-0.000068 rms=0.003834 Jy/beam ! Combined flux in latest and established models = 0.27265 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.27265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059433Jy sigma=0.000988 ! Fit after self-cal, rms=0.059443Jy sigma=0.000988 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059443Jy sigma=0.000988 ! Fit after self-cal, rms=0.060054Jy sigma=0.000978 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=9.214 mas, bpa=8.075 degrees ! Estimated noise=1128.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203825 Jy ! Component: 100 - total flux cleaned = -0.00290546 Jy ! Component: 150 - total flux cleaned = -0.0037046 Jy ! Component: 200 - total flux cleaned = -0.00444401 Jy ! Total flux subtracted in 200 components = -0.00444401 Jy ! Clean residual min=-0.014776 max=0.012099 Jy/beam ! Clean residual mean=-0.000067 rms=0.003287 Jy/beam ! Combined flux in latest and established models = 0.268206 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.268206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058127Jy sigma=0.000913 ! Fit after self-cal, rms=0.058137Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000922925 Jy ! Component: 100 - total flux cleaned = -0.00155961 Jy ! Component: 150 - total flux cleaned = -0.00217234 Jy ! Component: 200 - total flux cleaned = -0.00274996 Jy ! Total flux subtracted in 200 components = -0.00274996 Jy ! Clean residual min=-0.013190 max=0.011953 Jy/beam ! Clean residual mean=-0.000076 rms=0.003004 Jy/beam ! Combined flux in latest and established models = 0.265456 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.265456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056861Jy sigma=0.000878 ! Fit after self-cal, rms=0.056875Jy sigma=0.000878 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056875Jy sigma=0.000878 ! Fit after self-cal, rms=0.057481Jy sigma=0.000872 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.889 mas, bmaj=30.7 mas, bpa=14.13 degrees ! Estimated noise=1243.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0057054 Jy ! Component: 100 - total flux cleaned = -0.00668185 Jy ! Component: 150 - total flux cleaned = -0.00747468 Jy ! Component: 200 - total flux cleaned = -0.00802771 Jy ! Total flux subtracted in 200 components = -0.00802771 Jy ! Clean residual min=-0.009372 max=0.011825 Jy/beam ! Clean residual mean=-0.000153 rms=0.003156 Jy/beam ! Combined flux in latest and established models = 0.257428 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.257428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057483Jy sigma=0.000856 ! Fit after self-cal, rms=0.057479Jy sigma=0.000856 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390293 Jy ! Component: 100 - total flux cleaned = -0.000817263 Jy ! Component: 150 - total flux cleaned = -0.00112769 Jy ! Component: 200 - total flux cleaned = -0.00141198 Jy ! Total flux subtracted in 200 components = -0.00141198 Jy ! Clean residual min=-0.008751 max=0.012126 Jy/beam ! Clean residual mean=-0.000161 rms=0.003092 Jy/beam ! Combined flux in latest and established models = 0.256016 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.256016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057530Jy sigma=0.000853 ! Fit after self-cal, rms=0.057538Jy sigma=0.000853 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.559 mas, bmaj=9.201 mas, bpa=8.097 degrees ! Estimated noise=1132.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.559 x 9.201 at 8.097 degrees (North through East) ! Clean map min=-0.021583 max=0.14744 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.355 mas, bpa=7.718 degrees ! Estimated noise=1409.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225144 Jy ! Component: 100 - total flux cleaned = 0.267942 Jy ! Component: 150 - total flux cleaned = 0.269551 Jy ! Component: 200 - total flux cleaned = 0.269529 Jy ! Total flux subtracted in 200 components = 0.269529 Jy ! Clean residual min=-0.013724 max=0.018969 Jy/beam ! Clean residual mean=-0.000018 rms=0.003499 Jy/beam ! Combined flux in latest and established models = 0.269529 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.269529 Jy ! Inverting map and beam ! Estimated beam: bmin=3.559 mas, bmaj=9.201 mas, bpa=8.097 degrees ! Estimated noise=1132.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, -49). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495121 Jy ! Component: 100 - total flux cleaned = 0.00532898 Jy ! Component: 150 - total flux cleaned = 0.00598035 Jy ! Component: 200 - total flux cleaned = 0.00598635 Jy ! Total flux subtracted in 200 components = 0.00598635 Jy ! Clean residual min=-0.006756 max=0.009636 Jy/beam ! Clean residual mean=-0.000035 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 0.275516 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.275516 Jy ! Inverting map ! Added new window around map position (-22, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692421 Jy ! Component: 100 - total flux cleaned = 0.00762689 Jy ! Component: 150 - total flux cleaned = 0.00781232 Jy ! Component: 200 - total flux cleaned = 0.00798183 Jy ! Total flux subtracted in 200 components = 0.00798183 Jy ! Clean residual min=-0.005678 max=0.005761 Jy/beam ! Clean residual mean=-0.000007 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.283497 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 0.283497 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.889 mas, bmaj=30.7 mas, bpa=14.13 degrees ! Estimated noise=1243.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228594 Jy ! Component: 100 - total flux cleaned = 0.00315784 Jy ! Component: 150 - total flux cleaned = 0.00353481 Jy ! Component: 200 - total flux cleaned = 0.00366144 Jy ! Total flux subtracted in 200 components = 0.00366144 Jy ! Clean residual min=-0.005092 max=0.004360 Jy/beam ! Clean residual mean=0.000011 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.287159 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.79239e-05 Jy ! Component: 100 - total flux cleaned = 0.000151242 Jy ! Component: 150 - total flux cleaned = 0.000221297 Jy ! Component: 200 - total flux cleaned = 0.000286642 Jy ! Total flux subtracted in 200 components = 0.000286642 Jy ! Clean residual min=-0.004907 max=0.004280 Jy/beam ! Clean residual mean=0.000012 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.287446 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.287445 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.559 mas, bmaj=9.201 mas, bpa=8.097 degrees ! Estimated noise=1132.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.80284e-05 Jy ! Component: 100 - total flux cleaned = -0.000398907 Jy ! Component: 150 - total flux cleaned = -0.000529203 Jy ! Component: 200 - total flux cleaned = -0.00065806 Jy ! Total flux subtracted in 200 components = -0.00065806 Jy ! Clean residual min=-0.004900 max=0.005150 Jy/beam ! Clean residual mean=0.000005 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.286787 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 93 components and 0.286787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056260Jy sigma=0.000740 ! Fit after self-cal, rms=0.056251Jy sigma=0.000738 wmodel J0403-3605_S_2017_04_28_pus_map.mod ! Writing 93 model components to file: J0403-3605_S_2017_04_28_pus_map.mod wobs J0403-3605_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0403-3605_S_2017_04_28_pus_uvs.fits wwins J0403-3605_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0403-3605_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000650542 Jy ! Component: 100 - total flux cleaned = 0.00105942 Jy ! Component: 150 - total flux cleaned = 0.00143635 Jy ! Component: 200 - total flux cleaned = 0.00158383 Jy ! Component: 250 - total flux cleaned = 0.00172128 Jy ! Component: 300 - total flux cleaned = 0.0016552 Jy ! Component: 350 - total flux cleaned = 0.00165406 Jy ! Component: 400 - total flux cleaned = 0.00146898 Jy ! Component: 450 - total flux cleaned = 0.00117235 Jy ! Component: 500 - total flux cleaned = 0.00088609 Jy ! Component: 550 - total flux cleaned = 0.000608399 Jy ! Component: 600 - total flux cleaned = 0.000393027 Jy ! Component: 650 - total flux cleaned = 0.000289626 Jy ! Component: 700 - total flux cleaned = 0.000187694 Jy ! Component: 750 - total flux cleaned = 0.000138203 Jy ! Component: 800 - total flux cleaned = 0.000187428 Jy ! Component: 850 - total flux cleaned = 0.000332344 Jy ! Component: 900 - total flux cleaned = 0.000475117 Jy ! Component: 950 - total flux cleaned = 0.000476015 Jy ! Component: 1000 - total flux cleaned = 0.00070644 Jy ! Component: 1050 - total flux cleaned = 0.000842111 Jy ! Component: 1100 - total flux cleaned = 0.00093118 Jy ! Component: 1150 - total flux cleaned = 0.00119466 Jy ! Component: 1200 - total flux cleaned = 0.0013678 Jy ! Component: 1250 - total flux cleaned = 0.00149605 Jy ! Component: 1300 - total flux cleaned = 0.0016231 Jy ! Component: 1350 - total flux cleaned = 0.00179028 Jy ! Component: 1400 - total flux cleaned = 0.00183133 Jy ! Component: 1450 - total flux cleaned = 0.00187189 Jy ! Component: 1500 - total flux cleaned = 0.0019531 Jy ! Component: 1550 - total flux cleaned = 0.0020333 Jy ! Component: 1600 - total flux cleaned = 0.0021126 Jy ! Component: 1650 - total flux cleaned = 0.00223055 Jy ! Component: 1700 - total flux cleaned = 0.00223019 Jy ! Component: 1750 - total flux cleaned = 0.00222973 Jy ! Component: 1800 - total flux cleaned = 0.0020751 Jy ! Component: 1850 - total flux cleaned = 0.00196008 Jy ! Component: 1900 - total flux cleaned = 0.00188396 Jy ! Component: 1950 - total flux cleaned = 0.0018083 Jy ! Component: 2000 - total flux cleaned = 0.00177086 Jy ! Component: 2050 - total flux cleaned = 0.00173337 Jy ! Component: 2100 - total flux cleaned = 0.00169626 Jy ! Component: 2150 - total flux cleaned = 0.0016593 Jy ! Component: 2200 - total flux cleaned = 0.00169617 Jy ! Component: 2250 - total flux cleaned = 0.00169617 Jy ! Component: 2300 - total flux cleaned = 0.00169626 Jy ! Component: 2350 - total flux cleaned = 0.00169628 Jy ! Component: 2400 - total flux cleaned = 0.00162412 Jy ! Component: 2450 - total flux cleaned = 0.00162395 Jy ! Component: 2500 - total flux cleaned = 0.0015523 Jy ! Component: 2550 - total flux cleaned = 0.00155242 Jy ! Component: 2600 - total flux cleaned = 0.00144555 Jy ! Component: 2650 - total flux cleaned = 0.00137474 Jy ! Component: 2700 - total flux cleaned = 0.00133927 Jy ! Component: 2750 - total flux cleaned = 0.00119782 Jy ! Component: 2800 - total flux cleaned = 0.00119762 Jy ! Component: 2850 - total flux cleaned = 0.00109217 Jy ! Component: 2900 - total flux cleaned = 0.00102223 Jy ! Component: 2950 - total flux cleaned = 0.000882611 Jy ! Component: 3000 - total flux cleaned = 0.000778088 Jy ! Component: 3050 - total flux cleaned = 0.000673383 Jy ! Component: 3100 - total flux cleaned = 0.00060376 Jy ! Component: 3150 - total flux cleaned = 0.000569131 Jy ! Component: 3200 - total flux cleaned = 0.000499559 Jy ! Component: 3250 - total flux cleaned = 0.000429775 Jy ! Component: 3300 - total flux cleaned = 0.000394849 Jy ! Component: 3350 - total flux cleaned = 0.000324838 Jy ! Component: 3400 - total flux cleaned = 0.000219303 Jy ! Component: 3450 - total flux cleaned = 4.3043e-05 Jy ! Component: 3500 - total flux cleaned = -2.76013e-05 Jy ! Component: 3550 - total flux cleaned = -0.000169502 Jy ! Component: 3600 - total flux cleaned = -0.000240943 Jy ! Component: 3650 - total flux cleaned = -0.000384005 Jy ! Component: 3700 - total flux cleaned = -0.000455768 Jy ! Component: 3750 - total flux cleaned = -0.000599563 Jy ! Component: 3800 - total flux cleaned = -0.000743785 Jy ! Component: 3850 - total flux cleaned = -0.000707486 Jy ! Component: 3900 - total flux cleaned = -0.000925545 Jy ! Component: 3950 - total flux cleaned = -0.00096217 Jy ! Component: 4000 - total flux cleaned = -0.00103559 Jy ! Component: 4050 - total flux cleaned = -0.00114614 Jy ! Total flux subtracted in 4096 components = -0.00129418 Jy ! Clean residual min=-0.002012 max=0.001854 Jy/beam ! Clean residual mean=0.000002 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.285493 Jy keep ! Adding 209 model components to the UV plane model. ! The established model now contains 302 components and 0.285493 Jy ![Exited script file: muppet] wmap "J0403-3605_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.559 x 9.201 at 8.097 degrees (North through East) ! Clean map min=-0.005842 max=0.2371 Jy/beam ! Writing clean map to FITS file: J0403-3605_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.237096 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000694329 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.878543 0.878543 1.75709 3.51417 7.02834 14.0567 28.1134 56.2268 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.237 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.559 x 9.201 at 8.097 degrees (North through East) ! Clean map min=-0.005842 max=0.2371 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0403-3605_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:15:59 2019