! Started logfile: J0403-3605_S_2017_02_24_pus_uvs.log on Sat May 4 11:17:25 2019 obs J0403-3605_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0403-3605_S_2017_02_24_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.624074 visibilities/baseline/integration-bin. ! Found source: J0403-3605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 2696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0403-3605_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.259843Jy sigma=0.001245 ! Fit after self-cal, rms=0.249401Jy sigma=0.001177 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=7.271 mas, bpa=-0.7845 degrees ! Estimated noise=3275.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.804044 Jy ! Component: 100 - total flux cleaned = 0.985213 Jy ! Total flux subtracted in 100 components = 0.985213 Jy ! Clean residual min=-0.034813 max=0.074332 Jy/beam ! Clean residual mean=-0.000804 rms=0.009772 Jy/beam ! Combined flux in latest and established models = 0.985214 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.985214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252447Jy sigma=0.001207 ! Fit after self-cal, rms=0.252440Jy sigma=0.001207 ! Inverting map ! Added new window around map position (-3, -6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0749922 Jy ! Component: 100 - total flux cleaned = 0.114838 Jy ! Total flux subtracted in 100 components = 0.114838 Jy ! Clean residual min=-0.028496 max=0.050872 Jy/beam ! Clean residual mean=-0.000548 rms=0.007514 Jy/beam ! Combined flux in latest and established models = 1.10005 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 1.10005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219277Jy sigma=0.000985 ! Fit after self-cal, rms=0.218526Jy sigma=0.000979 ! Inverting map ! Added new window around map position (6.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420784 Jy ! Component: 100 - total flux cleaned = 0.0583348 Jy ! Total flux subtracted in 100 components = 0.0583348 Jy ! Clean residual min=-0.025857 max=0.033068 Jy/beam ! Clean residual mean=-0.000412 rms=0.006614 Jy/beam ! Combined flux in latest and established models = 1.15839 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 1.15839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207948Jy sigma=0.000922 ! Fit after self-cal, rms=0.207514Jy sigma=0.000918 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=8.724 mas, bpa=0.9132 degrees ! Estimated noise=2679.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270156 Jy ! Component: 100 - total flux cleaned = 0.0370533 Jy ! Component: 150 - total flux cleaned = 0.0412817 Jy ! Component: 200 - total flux cleaned = 0.0444592 Jy ! Total flux subtracted in 200 components = 0.0444592 Jy ! Clean residual min=-0.022934 max=0.023786 Jy/beam ! Clean residual mean=-0.000682 rms=0.005466 Jy/beam ! Combined flux in latest and established models = 1.20285 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 1.20285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201933Jy sigma=0.000895 ! Fit after self-cal, rms=0.201757Jy sigma=0.000894 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 1.30 KP 1.02 ! LA 0.98 MK 1.02 NL 1.07 OV 1.04 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.33 KP 0.96 ! LA 0.95 MK 1.00 NL 1.07 OV 1.08 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00 HN 1.31 KP 1.03 ! LA 1.00 MK 1.01 NL 1.19 OV 0.98 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.12 KP 1.00* ! LA 0.85 MK 0.95 NL 1.00* OV 0.96 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.201757Jy sigma=0.000894 ! Fit after self-cal, rms=0.162794Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=8.649 mas, bpa=1.321 degrees ! Estimated noise=2706.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00270741 Jy ! Component: 100 - total flux cleaned = -0.00467095 Jy ! Component: 150 - total flux cleaned = -0.00636045 Jy ! Component: 200 - total flux cleaned = -0.00752928 Jy ! Total flux subtracted in 200 components = -0.00752928 Jy ! Clean residual min=-0.013650 max=0.013423 Jy/beam ! Clean residual mean=-0.000352 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 1.19532 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 1.19532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161066Jy sigma=0.000757 ! Fit after self-cal, rms=0.161051Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161051Jy sigma=0.000756 ! Fit after self-cal, rms=0.160907Jy sigma=0.000752 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=8.657 mas, bpa=1.248 degrees ! Estimated noise=2708.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00238792 Jy ! Component: 100 - total flux cleaned = -0.00311978 Jy ! Component: 150 - total flux cleaned = -0.00400806 Jy ! Component: 200 - total flux cleaned = -0.00479645 Jy ! Total flux subtracted in 200 components = -0.00479645 Jy ! Clean residual min=-0.012938 max=0.013338 Jy/beam ! Clean residual mean=-0.000267 rms=0.003193 Jy/beam ! Combined flux in latest and established models = 1.19052 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 1.19052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160026Jy sigma=0.000748 ! Fit after self-cal, rms=0.160041Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100261 Jy ! Component: 100 - total flux cleaned = -0.00152882 Jy ! Component: 150 - total flux cleaned = -0.00201367 Jy ! Component: 200 - total flux cleaned = -0.00246502 Jy ! Total flux subtracted in 200 components = -0.00246502 Jy ! Clean residual min=-0.012692 max=0.013185 Jy/beam ! Clean residual mean=-0.000283 rms=0.003145 Jy/beam ! Combined flux in latest and established models = 1.18805 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 1.18805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159626Jy sigma=0.000747 ! Fit after self-cal, rms=0.159612Jy sigma=0.000747 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159612Jy sigma=0.000747 ! Fit after self-cal, rms=0.139970Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=8.663 mas, bpa=1.259 degrees ! Estimated noise=2704.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00463876 Jy ! Component: 100 - total flux cleaned = -0.00558937 Jy ! Component: 150 - total flux cleaned = -0.00628606 Jy ! Component: 200 - total flux cleaned = -0.00690353 Jy ! Total flux subtracted in 200 components = -0.00690353 Jy ! Clean residual min=-0.010538 max=0.012420 Jy/beam ! Clean residual mean=-0.000070 rms=0.002387 Jy/beam ! Combined flux in latest and established models = 1.18115 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 1.18115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139533Jy sigma=0.000671 ! Fit after self-cal, rms=0.139475Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111224 Jy ! Component: 100 - total flux cleaned = 0.0132462 Jy ! Component: 150 - total flux cleaned = 0.0134114 Jy ! Component: 200 - total flux cleaned = 0.0129818 Jy ! Total flux subtracted in 200 components = 0.0129818 Jy ! Clean residual min=-0.009513 max=0.008623 Jy/beam ! Clean residual mean=-0.000001 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 1.19413 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 131 components and 1.19413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138501Jy sigma=0.000665 ! Fit after self-cal, rms=0.138335Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138335Jy sigma=0.000664 ! Fit after self-cal, rms=0.138302Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.754 mas, bmaj=24.79 mas, bpa=3.669 degrees ! Estimated noise=3351.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322899 Jy ! Component: 100 - total flux cleaned = 0.00377591 Jy ! Component: 150 - total flux cleaned = 0.003645 Jy ! Component: 200 - total flux cleaned = 0.00343184 Jy ! Total flux subtracted in 200 components = 0.00343184 Jy ! Clean residual min=-0.007429 max=0.007239 Jy/beam ! Clean residual mean=0.000016 rms=0.002242 Jy/beam ! Combined flux in latest and established models = 1.19757 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 162 components and 1.19757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137952Jy sigma=0.000662 ! Fit after self-cal, rms=0.137769Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145818 Jy ! Component: 100 - total flux cleaned = 0.00146477 Jy ! Component: 150 - total flux cleaned = 0.00127045 Jy ! Component: 200 - total flux cleaned = 0.000999269 Jy ! Total flux subtracted in 200 components = 0.000999269 Jy ! Clean residual min=-0.007309 max=0.007433 Jy/beam ! Clean residual mean=0.000025 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 1.19856 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 169 components and 1.19856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137662Jy sigma=0.000661 ! Fit after self-cal, rms=0.137534Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=8.663 mas, bpa=1.277 degrees ! Estimated noise=2701.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 8.663 at 1.277 degrees (North through East) ! Clean map min=-0.011841 max=1.0029 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137534Jy sigma=0.000660 ! Fit after self-cal, rms=0.128638Jy sigma=0.000608 ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=8.657 mas, bpa=1.242 degrees ! Estimated noise=2697.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971991 Jy ! Component: 100 - total flux cleaned = 0.000570164 Jy ! Component: 150 - total flux cleaned = 0.000224727 Jy ! Component: 200 - total flux cleaned = 0.000124559 Jy ! Total flux subtracted in 200 components = 0.000124559 Jy ! Clean residual min=-0.008168 max=0.007222 Jy/beam ! Clean residual mean=0.000007 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 1.19869 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 184 components and 1.19869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128346Jy sigma=0.000606 ! Fit after self-cal, rms=0.128304Jy sigma=0.000606 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530382 Jy ! Component: 100 - total flux cleaned = 0.0004338 Jy ! Component: 150 - total flux cleaned = 0.000253018 Jy ! Component: 200 - total flux cleaned = 8.52353e-05 Jy ! Total flux subtracted in 200 components = 8.52353e-05 Jy ! Clean residual min=-0.008007 max=0.007188 Jy/beam ! Clean residual mean=0.000007 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 1.19877 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 192 components and 1.19877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128169Jy sigma=0.000606 ! Fit after self-cal, rms=0.128148Jy sigma=0.000606 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128148Jy sigma=0.000606 ! Fit after self-cal, rms=0.128187Jy sigma=0.000605 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=7.194 mas, bpa=-0.4114 degrees ! Estimated noise=3306.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.811256 Jy ! Component: 100 - total flux cleaned = 0.994899 Jy ! Component: 150 - total flux cleaned = 1.06449 Jy ! Component: 200 - total flux cleaned = 1.104 Jy ! Total flux subtracted in 200 components = 1.104 Jy ! Clean residual min=-0.013012 max=0.025285 Jy/beam ! Clean residual mean=-0.000226 rms=0.003678 Jy/beam ! Combined flux in latest and established models = 1.104 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.104 Jy ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.654 mas, bpa=1.252 degrees ! Estimated noise=2694.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382701 Jy ! Component: 100 - total flux cleaned = 0.05862 Jy ! Component: 150 - total flux cleaned = 0.0718636 Jy ! Component: 200 - total flux cleaned = 0.0809578 Jy ! Total flux subtracted in 200 components = 0.0809578 Jy ! Clean residual min=-0.007446 max=0.007670 Jy/beam ! Clean residual mean=-0.000076 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 1.18495 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 66 components and 1.18495 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.759 mas, bmaj=24.78 mas, bpa=3.68 degrees ! Estimated noise=3345.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00828739 Jy ! Component: 100 - total flux cleaned = 0.01196 Jy ! Component: 150 - total flux cleaned = 0.0127629 Jy ! Component: 200 - total flux cleaned = 0.0131079 Jy ! Total flux subtracted in 200 components = 0.0131079 Jy ! Clean residual min=-0.005986 max=0.007472 Jy/beam ! Clean residual mean=0.000008 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 1.19806 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214865 Jy ! Component: 100 - total flux cleaned = 0.000317461 Jy ! Component: 150 - total flux cleaned = 0.000415448 Jy ! Component: 200 - total flux cleaned = 0.000507535 Jy ! Total flux subtracted in 200 components = 0.000507535 Jy ! Clean residual min=-0.005861 max=0.007382 Jy/beam ! Clean residual mean=0.000015 rms=0.002044 Jy/beam ! Combined flux in latest and established models = 1.19857 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 106 components and 1.19857 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.654 mas, bpa=1.252 degrees ! Estimated noise=2694.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000724409 Jy ! Component: 100 - total flux cleaned = 0.000231075 Jy ! Component: 150 - total flux cleaned = 0.000230721 Jy ! Component: 200 - total flux cleaned = 0.000481046 Jy ! Total flux subtracted in 200 components = 0.000481046 Jy ! Clean residual min=-0.007055 max=0.007321 Jy/beam ! Clean residual mean=0.000010 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 1.19905 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 121 components and 1.19905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128153Jy sigma=0.000605 ! Fit after self-cal, rms=0.127837Jy sigma=0.000604 wmodel J0403-3605_S_2017_02_24_pus_map.mod ! Writing 121 model components to file: J0403-3605_S_2017_02_24_pus_map.mod wobs J0403-3605_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0403-3605_S_2017_02_24_pus_uvs.fits wwins J0403-3605_S_2017_02_24_pus_map.win ! wwins: Wrote 5 windows to J0403-3605_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000384099 Jy ! Component: 100 - total flux cleaned = -0.00106627 Jy ! Component: 150 - total flux cleaned = -0.00205665 Jy ! Component: 200 - total flux cleaned = -0.00279942 Jy ! Component: 250 - total flux cleaned = -0.00320984 Jy ! Component: 300 - total flux cleaned = -0.00341218 Jy ! Component: 350 - total flux cleaned = -0.00408673 Jy ! Component: 400 - total flux cleaned = -0.00474073 Jy ! Component: 450 - total flux cleaned = -0.00501432 Jy ! Component: 500 - total flux cleaned = -0.00527982 Jy ! Component: 550 - total flux cleaned = -0.00554101 Jy ! Component: 600 - total flux cleaned = -0.00571143 Jy ! Component: 650 - total flux cleaned = -0.00562996 Jy ! Component: 700 - total flux cleaned = -0.00571372 Jy ! Component: 750 - total flux cleaned = -0.00547107 Jy ! Component: 800 - total flux cleaned = -0.00539354 Jy ! Component: 850 - total flux cleaned = -0.00570855 Jy ! Component: 900 - total flux cleaned = -0.00570716 Jy ! Component: 950 - total flux cleaned = -0.00570697 Jy ! Component: 1000 - total flux cleaned = -0.00570733 Jy ! Component: 1050 - total flux cleaned = -0.00585381 Jy ! Component: 1100 - total flux cleaned = -0.00578088 Jy ! Component: 1150 - total flux cleaned = -0.0059953 Jy ! Component: 1200 - total flux cleaned = -0.00599566 Jy ! Component: 1250 - total flux cleaned = -0.00627557 Jy ! Component: 1300 - total flux cleaned = -0.00620737 Jy ! Component: 1350 - total flux cleaned = -0.00627571 Jy ! Component: 1400 - total flux cleaned = -0.00634417 Jy ! Component: 1450 - total flux cleaned = -0.00654357 Jy ! Component: 1500 - total flux cleaned = -0.00634697 Jy ! Component: 1550 - total flux cleaned = -0.0065411 Jy ! Component: 1600 - total flux cleaned = -0.00628523 Jy ! Component: 1650 - total flux cleaned = -0.00634921 Jy ! Component: 1700 - total flux cleaned = -0.00616206 Jy ! Component: 1750 - total flux cleaned = -0.00622385 Jy ! Component: 1800 - total flux cleaned = -0.00604059 Jy ! Component: 1850 - total flux cleaned = -0.00597966 Jy ! Component: 1900 - total flux cleaned = -0.00579966 Jy ! Component: 1950 - total flux cleaned = -0.00574063 Jy ! Component: 2000 - total flux cleaned = -0.0054477 Jy ! Component: 2050 - total flux cleaned = -0.00527362 Jy ! Component: 2100 - total flux cleaned = -0.0052164 Jy ! Component: 2150 - total flux cleaned = -0.00510391 Jy ! Component: 2200 - total flux cleaned = -0.00493587 Jy ! Component: 2250 - total flux cleaned = -0.00476913 Jy ! Component: 2300 - total flux cleaned = -0.00433037 Jy ! Component: 2350 - total flux cleaned = -0.00422185 Jy ! Component: 2400 - total flux cleaned = -0.00384534 Jy ! Component: 2450 - total flux cleaned = -0.0037912 Jy ! Component: 2500 - total flux cleaned = -0.00363205 Jy ! Component: 2550 - total flux cleaned = -0.00316123 Jy ! Component: 2600 - total flux cleaned = -0.00321289 Jy ! Component: 2650 - total flux cleaned = -0.00316124 Jy ! Component: 2700 - total flux cleaned = -0.00295714 Jy ! Component: 2750 - total flux cleaned = -0.00290648 Jy ! Component: 2800 - total flux cleaned = -0.00270611 Jy ! Component: 2850 - total flux cleaned = -0.0025581 Jy ! Component: 2900 - total flux cleaned = -0.0024113 Jy ! Component: 2950 - total flux cleaned = -0.00245949 Jy ! Component: 3000 - total flux cleaned = -0.00231493 Jy ! Component: 3050 - total flux cleaned = -0.00226769 Jy ! Component: 3100 - total flux cleaned = -0.00236283 Jy ! Component: 3150 - total flux cleaned = -0.00245741 Jy ! Component: 3200 - total flux cleaned = -0.00231727 Jy ! Component: 3250 - total flux cleaned = -0.00245608 Jy ! Component: 3300 - total flux cleaned = -0.00217915 Jy ! Component: 3350 - total flux cleaned = -0.00222557 Jy ! Component: 3400 - total flux cleaned = -0.00218028 Jy ! Component: 3450 - total flux cleaned = -0.00208976 Jy ! Component: 3500 - total flux cleaned = -0.00217959 Jy ! Component: 3550 - total flux cleaned = -0.00226805 Jy ! Component: 3600 - total flux cleaned = -0.00218013 Jy ! Component: 3650 - total flux cleaned = -0.00226771 Jy ! Component: 3700 - total flux cleaned = -0.00222403 Jy ! Component: 3750 - total flux cleaned = -0.00231022 Jy ! Component: 3800 - total flux cleaned = -0.0024384 Jy ! Component: 3850 - total flux cleaned = -0.00243825 Jy ! Component: 3900 - total flux cleaned = -0.00243875 Jy ! Component: 3950 - total flux cleaned = -0.00260731 Jy ! Component: 4000 - total flux cleaned = -0.00285748 Jy ! Component: 4050 - total flux cleaned = -0.00285765 Jy ! Total flux subtracted in 4096 components = -0.00293987 Jy ! Clean residual min=-0.003591 max=0.002467 Jy/beam ! Clean residual mean=-0.000002 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 1.19611 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 392 components and 1.19611 Jy ![Exited script file: muppet] wmap "J0403-3605_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 8.654 at 1.252 degrees (North through East) ! Clean map min=-0.0055667 max=1.0125 Jy/beam ! Writing clean map to FITS file: J0403-3605_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.01248 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000757013 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.224305 0.224305 0.44861 0.89722 1.79444 3.58888 7.17776 14.3555 28.711 57.4221 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.012 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 8.654 at 1.252 degrees (North through East) ! Clean map min=-0.0055667 max=1.0125 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0403-3605_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:17:30 2019