! Started logfile: J0403-3605_S_2017_01_21_pus_uvs.log on Sun May 5 15:45:49 2019 obs J0403-3605_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0403-3605_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.385417 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0403-3605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0403-3605_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.160098Jy sigma=0.000917 ! Fit after self-cal, rms=0.150423Jy sigma=0.000856 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.429 mas, bmaj=20.2 mas, bpa=6.274 degrees ! Estimated noise=6804.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.776328 Jy ! Component: 100 - total flux cleaned = 0.95327 Jy ! Total flux subtracted in 100 components = 0.95327 Jy ! Clean residual min=-0.043860 max=0.067631 Jy/beam ! Clean residual mean=0.000489 rms=0.017480 Jy/beam ! Combined flux in latest and established models = 0.95327 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.95327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156115Jy sigma=0.000931 ! Fit after self-cal, rms=0.155997Jy sigma=0.000931 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=22.67 mas, bpa=6.779 degrees ! Estimated noise=5914.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716133 Jy ! Component: 100 - total flux cleaned = 0.106054 Jy ! Component: 150 - total flux cleaned = 0.124254 Jy ! Component: 200 - total flux cleaned = 0.134432 Jy ! Total flux subtracted in 200 components = 0.134432 Jy ! Clean residual min=-0.017464 max=0.021023 Jy/beam ! Clean residual mean=0.000307 rms=0.005678 Jy/beam ! Combined flux in latest and established models = 1.0877 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 1.0877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122690Jy sigma=0.000702 ! Fit after self-cal, rms=0.122464Jy sigma=0.000700 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* LA 1.08 ! MK 1.00* NL 1.00 OV 1.01 PT 0.99 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* LA 1.03 ! MK 1.00* NL 1.00 OV 1.04 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* LA 1.00 ! MK 1.00* NL 1.01 OV 0.95 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* LA 0.90 ! MK 1.00* NL 1.00* OV 0.94 PT 0.94 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.122464Jy sigma=0.000700 ! Fit after self-cal, rms=0.108245Jy sigma=0.000629 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.965 mas, bmaj=22.72 mas, bpa=6.795 degrees ! Estimated noise=5888.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106597 Jy ! Component: 100 - total flux cleaned = 0.00059359 Jy ! Component: 150 - total flux cleaned = 7.31324e-05 Jy ! Component: 200 - total flux cleaned = -0.000159738 Jy ! Total flux subtracted in 200 components = -0.000159738 Jy ! Clean residual min=-0.011668 max=0.010866 Jy/beam ! Clean residual mean=0.000080 rms=0.003286 Jy/beam ! Combined flux in latest and established models = 1.08754 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 1.08754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107780Jy sigma=0.000626 ! Fit after self-cal, rms=0.107743Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107743Jy sigma=0.000626 ! Fit after self-cal, rms=0.107673Jy sigma=0.000626 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.965 mas, bmaj=22.72 mas, bpa=6.793 degrees ! Estimated noise=5884.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157083 Jy ! Component: 100 - total flux cleaned = -0.000169336 Jy ! Component: 150 - total flux cleaned = -0.000358091 Jy ! Component: 200 - total flux cleaned = -0.000355688 Jy ! Total flux subtracted in 200 components = -0.000355688 Jy ! Clean residual min=-0.011297 max=0.010834 Jy/beam ! Clean residual mean=0.000076 rms=0.003147 Jy/beam ! Combined flux in latest and established models = 1.08719 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 1.08719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107447Jy sigma=0.000624 ! Fit after self-cal, rms=0.107439Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.62784e-06 Jy ! Component: 100 - total flux cleaned = -0.000178054 Jy ! Component: 150 - total flux cleaned = -0.000177164 Jy ! Component: 200 - total flux cleaned = -0.000254292 Jy ! Total flux subtracted in 200 components = -0.000254292 Jy ! Clean residual min=-0.011356 max=0.010648 Jy/beam ! Clean residual mean=0.000075 rms=0.003052 Jy/beam ! Combined flux in latest and established models = 1.08693 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 1.08693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107305Jy sigma=0.000624 ! Fit after self-cal, rms=0.107301Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107301Jy sigma=0.000623 ! Fit after self-cal, rms=0.107276Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.965 mas, bmaj=22.73 mas, bpa=6.79 degrees ! Estimated noise=5882.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633766 Jy ! Component: 100 - total flux cleaned = -0.00078718 Jy ! Component: 150 - total flux cleaned = -0.000785729 Jy ! Component: 200 - total flux cleaned = -0.000849513 Jy ! Total flux subtracted in 200 components = -0.000849513 Jy ! Clean residual min=-0.011400 max=0.010485 Jy/beam ! Clean residual mean=0.000073 rms=0.002977 Jy/beam ! Combined flux in latest and established models = 1.08608 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 1.08608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107177Jy sigma=0.000623 ! Fit after self-cal, rms=0.107177Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.35409e-05 Jy ! Component: 100 - total flux cleaned = -5.03282e-05 Jy ! Component: 150 - total flux cleaned = -0.000113326 Jy ! Component: 200 - total flux cleaned = -0.000112556 Jy ! Total flux subtracted in 200 components = -0.000112556 Jy ! Clean residual min=-0.011415 max=0.010320 Jy/beam ! Clean residual mean=0.000072 rms=0.002919 Jy/beam ! Combined flux in latest and established models = 1.08597 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 1.08597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107105Jy sigma=0.000622 ! Fit after self-cal, rms=0.107104Jy sigma=0.000622 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107104Jy sigma=0.000622 ! Fit after self-cal, rms=0.107102Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.558 mas, bmaj=28.78 mas, bpa=-4.191 degrees ! Estimated noise=6910.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132488 Jy ! Component: 100 - total flux cleaned = -0.000131678 Jy ! Component: 150 - total flux cleaned = -0.000129539 Jy ! Component: 200 - total flux cleaned = -8.11139e-05 Jy ! Total flux subtracted in 200 components = -8.11139e-05 Jy ! Clean residual min=-0.012375 max=0.010342 Jy/beam ! Clean residual mean=0.000111 rms=0.003226 Jy/beam ! Combined flux in latest and established models = 1.08589 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 1.08589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107095Jy sigma=0.000622 ! Fit after self-cal, rms=0.107096Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111355 Jy ! Component: 100 - total flux cleaned = 0.000112095 Jy ! Component: 150 - total flux cleaned = 7.05596e-05 Jy ! Component: 200 - total flux cleaned = 6.81008e-05 Jy ! Total flux subtracted in 200 components = 6.81008e-05 Jy ! Clean residual min=-0.012287 max=0.010384 Jy/beam ! Clean residual mean=0.000109 rms=0.003224 Jy/beam ! Combined flux in latest and established models = 1.08596 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 1.08596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107105Jy sigma=0.000623 ! Fit after self-cal, rms=0.107104Jy sigma=0.000622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.966 mas, bmaj=22.74 mas, bpa=6.789 degrees ! Estimated noise=5881.56 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.966 x 22.74 at 6.789 degrees (North through East) ! Clean map min=-0.01076 max=0.99868 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107104Jy sigma=0.000622 ! Fit after self-cal, rms=0.096699Jy sigma=0.000547 ! Inverting map and beam ! Estimated beam: bmin=3.974 mas, bmaj=22.72 mas, bpa=6.766 degrees ! Estimated noise=5890.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113403 Jy ! Component: 100 - total flux cleaned = -0.000364017 Jy ! Component: 150 - total flux cleaned = -0.000575515 Jy ! Component: 200 - total flux cleaned = -0.000673924 Jy ! Total flux subtracted in 200 components = -0.000673924 Jy ! Clean residual min=-0.011445 max=0.009913 Jy/beam ! Clean residual mean=0.000079 rms=0.002810 Jy/beam ! Combined flux in latest and established models = 1.08528 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 1.08528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096636Jy sigma=0.000547 ! Fit after self-cal, rms=0.096639Jy sigma=0.000547 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215538 Jy ! Component: 100 - total flux cleaned = -0.000214946 Jy ! Component: 150 - total flux cleaned = -0.000214108 Jy ! Component: 200 - total flux cleaned = -0.000214944 Jy ! Total flux subtracted in 200 components = -0.000214944 Jy ! Clean residual min=-0.011370 max=0.009808 Jy/beam ! Clean residual mean=0.000078 rms=0.002778 Jy/beam ! Combined flux in latest and established models = 1.08507 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 1.08507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096599Jy sigma=0.000546 ! Fit after self-cal, rms=0.096601Jy sigma=0.000546 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096601Jy sigma=0.000546 ! Fit after self-cal, rms=0.096571Jy sigma=0.000546 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=20.29 mas, bpa=6.251 degrees ! Estimated noise=6755.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.770708 Jy ! Component: 100 - total flux cleaned = 0.945388 Jy ! Component: 150 - total flux cleaned = 1.00901 Jy ! Component: 200 - total flux cleaned = 1.04315 Jy ! Total flux subtracted in 200 components = 1.04315 Jy ! Clean residual min=-0.019139 max=0.019946 Jy/beam ! Clean residual mean=0.000159 rms=0.006294 Jy/beam ! Combined flux in latest and established models = 1.04315 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.04315 Jy ! Inverting map and beam ! Estimated beam: bmin=3.974 mas, bmaj=22.73 mas, bpa=6.766 degrees ! Estimated noise=5887.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227039 Jy ! Component: 100 - total flux cleaned = 0.0342476 Jy ! Component: 150 - total flux cleaned = 0.03659 Jy ! Component: 200 - total flux cleaned = 0.038197 Jy ! Total flux subtracted in 200 components = 0.038197 Jy ! Clean residual min=-0.012669 max=0.010180 Jy/beam ! Clean residual mean=0.000087 rms=0.003560 Jy/beam ! Combined flux in latest and established models = 1.08135 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 1.08135 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.568 mas, bmaj=28.83 mas, bpa=-4.255 degrees ! Estimated noise=6903.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022849 Jy ! Component: 100 - total flux cleaned = 0.0025675 Jy ! Component: 150 - total flux cleaned = 0.00280163 Jy ! Component: 200 - total flux cleaned = 0.0029925 Jy ! Total flux subtracted in 200 components = 0.0029925 Jy ! Clean residual min=-0.012318 max=0.010342 Jy/beam ! Clean residual mean=0.000126 rms=0.003535 Jy/beam ! Combined flux in latest and established models = 1.08434 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.83132e-05 Jy ! Component: 100 - total flux cleaned = 0.000239775 Jy ! Component: 150 - total flux cleaned = 0.00036435 Jy ! Component: 200 - total flux cleaned = 0.00036891 Jy ! Total flux subtracted in 200 components = 0.00036891 Jy ! Clean residual min=-0.012179 max=0.009933 Jy/beam ! Clean residual mean=0.000120 rms=0.003363 Jy/beam ! Combined flux in latest and established models = 1.08471 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 1.08471 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.974 mas, bmaj=22.73 mas, bpa=6.766 degrees ! Estimated noise=5887.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552759 Jy ! Component: 100 - total flux cleaned = -0.000400138 Jy ! Component: 150 - total flux cleaned = -0.00027109 Jy ! Component: 200 - total flux cleaned = -0.00015844 Jy ! Total flux subtracted in 200 components = -0.00015844 Jy ! Clean residual min=-0.011369 max=0.010331 Jy/beam ! Clean residual mean=0.000073 rms=0.003067 Jy/beam ! Combined flux in latest and established models = 1.08455 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 1.08455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096980Jy sigma=0.000549 ! Fit after self-cal, rms=0.096932Jy sigma=0.000549 wmodel J0403-3605_S_2017_01_21_pus_map.mod ! Writing 70 model components to file: J0403-3605_S_2017_01_21_pus_map.mod wobs J0403-3605_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0403-3605_S_2017_01_21_pus_uvs.fits wwins J0403-3605_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0403-3605_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00341213 Jy ! Component: 100 - total flux cleaned = -0.00524722 Jy ! Component: 150 - total flux cleaned = -0.00553592 Jy ! Component: 200 - total flux cleaned = -0.00555446 Jy ! Component: 250 - total flux cleaned = -0.00498835 Jy ! Component: 300 - total flux cleaned = -0.0043769 Jy ! Component: 350 - total flux cleaned = -0.00381218 Jy ! Component: 400 - total flux cleaned = -0.00230938 Jy ! Component: 450 - total flux cleaned = -0.00239221 Jy ! Component: 500 - total flux cleaned = -0.00272283 Jy ! Component: 550 - total flux cleaned = -0.00304601 Jy ! Component: 600 - total flux cleaned = -0.00288426 Jy ! Component: 650 - total flux cleaned = -0.00280425 Jy ! Component: 700 - total flux cleaned = -0.00272482 Jy ! Component: 750 - total flux cleaned = -0.00256391 Jy ! Component: 800 - total flux cleaned = -0.00256422 Jy ! Component: 850 - total flux cleaned = -0.00256767 Jy ! Component: 900 - total flux cleaned = -0.00257042 Jy ! Component: 950 - total flux cleaned = -0.00257053 Jy ! Component: 1000 - total flux cleaned = -0.00266456 Jy ! Component: 1050 - total flux cleaned = -0.00265943 Jy ! Component: 1100 - total flux cleaned = -0.00276727 Jy ! Component: 1150 - total flux cleaned = -0.00254059 Jy ! Component: 1200 - total flux cleaned = -0.00242152 Jy ! Component: 1250 - total flux cleaned = -0.00216915 Jy ! Component: 1300 - total flux cleaned = -0.00203553 Jy ! Component: 1350 - total flux cleaned = -0.00190001 Jy ! Component: 1400 - total flux cleaned = -0.0019031 Jy ! Component: 1450 - total flux cleaned = -0.00190473 Jy ! Component: 1500 - total flux cleaned = -0.00207206 Jy ! Component: 1550 - total flux cleaned = -0.0018968 Jy ! Component: 1600 - total flux cleaned = -0.00189048 Jy ! Component: 1650 - total flux cleaned = -0.00189465 Jy ! Component: 1700 - total flux cleaned = -0.00189954 Jy ! Component: 1750 - total flux cleaned = -0.00190001 Jy ! Component: 1800 - total flux cleaned = -0.00190434 Jy ! Component: 1850 - total flux cleaned = -0.00190753 Jy ! Component: 1900 - total flux cleaned = -0.00216031 Jy ! Component: 1950 - total flux cleaned = -0.00243987 Jy ! Component: 2000 - total flux cleaned = -0.00243472 Jy ! Component: 2050 - total flux cleaned = -0.00273087 Jy ! Component: 2100 - total flux cleaned = -0.00337958 Jy ! Component: 2150 - total flux cleaned = -0.00373039 Jy ! Component: 2200 - total flux cleaned = -0.00409987 Jy ! Component: 2250 - total flux cleaned = -0.00409086 Jy ! Component: 2300 - total flux cleaned = -0.00489467 Jy ! Component: 2350 - total flux cleaned = -0.00575637 Jy ! Component: 2400 - total flux cleaned = -0.00622156 Jy ! Component: 2450 - total flux cleaned = -0.00719263 Jy ! Component: 2500 - total flux cleaned = -0.0077009 Jy ! Component: 2550 - total flux cleaned = -0.00878629 Jy ! Component: 2600 - total flux cleaned = -0.0093622 Jy ! Component: 2650 - total flux cleaned = -0.0105991 Jy ! Component: 2700 - total flux cleaned = -0.0112558 Jy ! Component: 2750 - total flux cleaned = -0.0126334 Jy ! Component: 2800 - total flux cleaned = -0.0133709 Jy ! Component: 2850 - total flux cleaned = -0.0149264 Jy ! Component: 2900 - total flux cleaned = -0.0157709 Jy ! Component: 2950 - total flux cleaned = -0.0166249 Jy ! Component: 3000 - total flux cleaned = -0.0184692 Jy ! Component: 3050 - total flux cleaned = -0.0204518 Jy ! Component: 3100 - total flux cleaned = -0.0214932 Jy ! Component: 3150 - total flux cleaned = -0.0225567 Jy ! Component: 3200 - total flux cleaned = -0.0248428 Jy ! Component: 3250 - total flux cleaned = -0.0273291 Jy ! Component: 3300 - total flux cleaned = -0.0286388 Jy ! Component: 3350 - total flux cleaned = -0.031426 Jy ! Component: 3400 - total flux cleaned = -0.0343857 Jy ! Component: 3450 - total flux cleaned = -0.0359896 Jy ! Component: 3500 - total flux cleaned = -0.0392518 Jy ! Component: 3550 - total flux cleaned = -0.0410046 Jy ! Component: 3600 - total flux cleaned = -0.0446962 Jy ! Component: 3650 - total flux cleaned = -0.0486458 Jy ! Component: 3700 - total flux cleaned = -0.0528722 Jy ! Component: 3750 - total flux cleaned = -0.0551535 Jy ! Component: 3800 - total flux cleaned = -0.0599278 Jy ! Component: 3850 - total flux cleaned = -0.062466 Jy ! Component: 3900 - total flux cleaned = -0.0678001 Jy ! Component: 3950 - total flux cleaned = -0.0734704 Jy ! Component: 4000 - total flux cleaned = -0.0795289 Jy ! Component: 4050 - total flux cleaned = -0.0859048 Jy ! Total flux subtracted in 4096 components = -0.0893096 Jy ! Clean residual min=-0.244503 max=0.182337 Jy/beam ! Clean residual mean=-0.002051 rms=0.054101 Jy/beam ! Combined flux in latest and established models = 0.995242 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 208 components and 0.995242 Jy ![Exited script file: muppet] wmap "J0403-3605_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.974 x 22.73 at 6.766 degrees (North through East) ! Clean map min=-0.25446 max=1.0028 Jy/beam ! Writing clean map to FITS file: J0403-3605_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.00279 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0567286 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -16.9713 16.9713 33.9426 67.8853 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.1701 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.002 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.974 x 22.73 at 6.766 degrees (North through East) ! Clean map min=-0.25446 max=1.0028 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0403-3605_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:45:54 2019