! Started logfile: J0402+8241_S_2017_10_21_pus_uvs.log on Sat May 11 20:49:45 2019 obs J0402+8241_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0402+8241_S_2017_10_21_pus_uva.fits ! AN table 1: 352 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.967014 visibilities/baseline/integration-bin. ! Found source: J0402+8241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 49016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0402+8241_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 486 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 207 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1829 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991552Jy sigma=0.009152 ! Fit after self-cal, rms=0.954439Jy sigma=0.008820 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=3.988 mas, bpa=46.58 degrees ! Estimated noise=943.179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342187 Jy ! Component: 100 - total flux cleaned = 0.0423884 Jy ! Total flux subtracted in 100 components = 0.0423884 Jy ! Clean residual min=-0.004179 max=0.004899 Jy/beam ! Clean residual mean=-0.000017 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.0423884 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0423884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086683Jy sigma=0.000759 ! Fit after self-cal, rms=0.085647Jy sigma=0.000749 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.288 mas, bmaj=5.491 mas, bpa=50.26 degrees ! Estimated noise=420.352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00916982 Jy ! Component: 100 - total flux cleaned = 0.0137332 Jy ! Component: 150 - total flux cleaned = 0.0162082 Jy ! Component: 200 - total flux cleaned = 0.0175583 Jy ! Total flux subtracted in 200 components = 0.0175583 Jy ! Clean residual min=-0.005472 max=0.005083 Jy/beam ! Clean residual mean=-0.000056 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.0599467 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 0.0599467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084672Jy sigma=0.000741 ! Fit after self-cal, rms=0.084566Jy sigma=0.000740 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.04 HN 1.05 KP 1.40 ! LA 1.01 MK 1.14 NL 1.14 OV 1.03 ! PT 0.72 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.07 HN 1.07 KP 1.22 ! LA 0.94 MK 1.15 NL 1.00* OV 1.08 ! PT 0.68 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 1.05 KP 1.16 ! LA 0.81 MK 1.16 NL 1.35 OV 0.97 ! PT 0.69 ! ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.01 KP 1.00* ! LA 0.81 MK 1.03 NL 1.00* OV 1.00* ! PT 0.58 ! ! ! Fit before self-cal, rms=0.084566Jy sigma=0.000740 ! Fit after self-cal, rms=0.089826Jy sigma=0.000728 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.42 mas, bmaj=5.665 mas, bpa=48.79 degrees ! Estimated noise=427.319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133114 Jy ! Component: 100 - total flux cleaned = 0.000194035 Jy ! Component: 150 - total flux cleaned = 0.000236619 Jy ! Component: 200 - total flux cleaned = 0.000248765 Jy ! Total flux subtracted in 200 components = 0.000248765 Jy ! Clean residual min=-0.003696 max=0.004308 Jy/beam ! Clean residual mean=0.000031 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.0601954 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.0601954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089815Jy sigma=0.000728 ! Fit after self-cal, rms=0.091215Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091215Jy sigma=0.000723 ! Fit after self-cal, rms=0.101481Jy sigma=0.000719 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.518 mas, bmaj=5.774 mas, bpa=47.16 degrees ! Estimated noise=440.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.98933e-05 Jy ! Component: 100 - total flux cleaned = 5.18982e-05 Jy ! Component: 150 - total flux cleaned = 5.17997e-05 Jy ! Component: 200 - total flux cleaned = 2.54348e-05 Jy ! Total flux subtracted in 200 components = 2.54348e-05 Jy ! Clean residual min=-0.002771 max=0.003930 Jy/beam ! Clean residual mean=0.000028 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0602209 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.0602209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101470Jy sigma=0.000719 ! Fit after self-cal, rms=0.102773Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37, -45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358403 Jy ! Component: 100 - total flux cleaned = 0.00518026 Jy ! Component: 150 - total flux cleaned = 0.00579978 Jy ! Component: 200 - total flux cleaned = 0.00598661 Jy ! Total flux subtracted in 200 components = 0.00598661 Jy ! Clean residual min=-0.003028 max=0.002956 Jy/beam ! Clean residual mean=-0.000003 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0662075 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 88 components and 0.0662075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102629Jy sigma=0.000716 ! Fit after self-cal, rms=0.102582Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102582Jy sigma=0.000715 ! Fit after self-cal, rms=0.112887Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.531 mas, bmaj=5.953 mas, bpa=46.01 degrees ! Estimated noise=451.615 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274014 Jy ! Component: 100 - total flux cleaned = 0.00396971 Jy ! Component: 150 - total flux cleaned = 0.00466151 Jy ! Component: 200 - total flux cleaned = 0.00497107 Jy ! Total flux subtracted in 200 components = 0.00497107 Jy ! Clean residual min=-0.002498 max=0.002929 Jy/beam ! Clean residual mean=0.000005 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0711785 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 0.0711785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112797Jy sigma=0.000714 ! Fit after self-cal, rms=0.113597Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193839 Jy ! Component: 100 - total flux cleaned = 0.00265221 Jy ! Component: 150 - total flux cleaned = 0.00273511 Jy ! Component: 200 - total flux cleaned = 0.00278241 Jy ! Total flux subtracted in 200 components = 0.00278241 Jy ! Clean residual min=-0.002653 max=0.002577 Jy/beam ! Clean residual mean=-0.000006 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0739609 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.0739609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113544Jy sigma=0.000713 ! Fit after self-cal, rms=0.113538Jy sigma=0.000712 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113538Jy sigma=0.000712 ! Fit after self-cal, rms=0.123694Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.828 mas, bmaj=11.96 mas, bpa=42.16 degrees ! Estimated noise=512.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238291 Jy ! Component: 100 - total flux cleaned = 0.00279202 Jy ! Component: 150 - total flux cleaned = 0.00295802 Jy ! Component: 200 - total flux cleaned = 0.00312832 Jy ! Total flux subtracted in 200 components = 0.00312832 Jy ! Clean residual min=-0.002929 max=0.003126 Jy/beam ! Clean residual mean=0.000003 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0770893 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 141 components and 0.0770893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123650Jy sigma=0.000711 ! Fit after self-cal, rms=0.124157Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169168 Jy ! Component: 100 - total flux cleaned = 0.00194181 Jy ! Component: 150 - total flux cleaned = 0.00205233 Jy ! Component: 200 - total flux cleaned = 0.00209831 Jy ! Total flux subtracted in 200 components = 0.00209831 Jy ! Clean residual min=-0.002863 max=0.002821 Jy/beam ! Clean residual mean=-0.000004 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0791876 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 153 components and 0.0791876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124132Jy sigma=0.000711 ! Fit after self-cal, rms=0.124111Jy sigma=0.000711 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.524 mas, bmaj=6.06 mas, bpa=45.69 degrees ! Estimated noise=458.866 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.524 x 6.06 at 45.69 degrees (North through East) ! Clean map min=-0.0023729 max=0.049533 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=4.238 mas, bpa=42.76 degrees ! Estimated noise=1134.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365978 Jy ! Component: 100 - total flux cleaned = 0.0466027 Jy ! Component: 150 - total flux cleaned = 0.0530953 Jy ! Component: 200 - total flux cleaned = 0.0580966 Jy ! Total flux subtracted in 200 components = 0.0580966 Jy ! Clean residual min=-0.003352 max=0.003395 Jy/beam ! Clean residual mean=-0.000018 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.0580966 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0580966 Jy ! Inverting map and beam ! Estimated beam: bmin=4.524 mas, bmaj=6.06 mas, bpa=45.69 degrees ! Estimated noise=458.866 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673384 Jy ! Component: 100 - total flux cleaned = 0.0111398 Jy ! Component: 150 - total flux cleaned = 0.0141793 Jy ! Component: 200 - total flux cleaned = 0.0163941 Jy ! Total flux subtracted in 200 components = 0.0163941 Jy ! Clean residual min=-0.002445 max=0.002648 Jy/beam ! Clean residual mean=-0.000021 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0744908 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 71 components and 0.0744907 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.828 mas, bmaj=11.96 mas, bpa=42.16 degrees ! Estimated noise=512.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023227 Jy ! Component: 100 - total flux cleaned = 0.00338193 Jy ! Component: 150 - total flux cleaned = 0.00390616 Jy ! Component: 200 - total flux cleaned = 0.00434554 Jy ! Total flux subtracted in 200 components = 0.00434554 Jy ! Clean residual min=-0.002916 max=0.002564 Jy/beam ! Clean residual mean=-0.000020 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0788363 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370613 Jy ! Component: 100 - total flux cleaned = 0.000624896 Jy ! Component: 150 - total flux cleaned = 0.000764121 Jy ! Component: 200 - total flux cleaned = 0.000891053 Jy ! Total flux subtracted in 200 components = 0.000891053 Jy ! Clean residual min=-0.002932 max=0.002682 Jy/beam ! Clean residual mean=-0.000017 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0797273 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 112 components and 0.0797273 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.524 mas, bmaj=6.06 mas, bpa=45.69 degrees ! Estimated noise=458.866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407742 Jy ! Component: 100 - total flux cleaned = 0.000465007 Jy ! Component: 150 - total flux cleaned = 0.000464223 Jy ! Component: 200 - total flux cleaned = 0.000507442 Jy ! Total flux subtracted in 200 components = 0.000507442 Jy ! Clean residual min=-0.002455 max=0.002509 Jy/beam ! Clean residual mean=-0.000013 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0802348 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 130 components and 0.0802348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124083Jy sigma=0.000711 ! Fit after self-cal, rms=0.124069Jy sigma=0.000710 wmodel J0402+8241_S_2017_10_21_pus_map.mod ! Writing 130 model components to file: J0402+8241_S_2017_10_21_pus_map.mod wobs J0402+8241_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0402+8241_S_2017_10_21_pus_uvs.fits wwins J0402+8241_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J0402+8241_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017545 Jy ! Component: 100 - total flux cleaned = 0.000295664 Jy ! Component: 150 - total flux cleaned = 0.000184745 Jy ! Component: 200 - total flux cleaned = 0.000255355 Jy ! Component: 250 - total flux cleaned = 0.000289964 Jy ! Component: 300 - total flux cleaned = 0.000355123 Jy ! Component: 350 - total flux cleaned = 0.000418084 Jy ! Component: 400 - total flux cleaned = 0.000661829 Jy ! Component: 450 - total flux cleaned = 0.000868334 Jy ! Component: 500 - total flux cleaned = 0.000983269 Jy ! Component: 550 - total flux cleaned = 0.00117885 Jy ! Component: 600 - total flux cleaned = 0.00123334 Jy ! Component: 650 - total flux cleaned = 0.00131378 Jy ! Component: 700 - total flux cleaned = 0.00128731 Jy ! Component: 750 - total flux cleaned = 0.00131361 Jy ! Component: 800 - total flux cleaned = 0.00126226 Jy ! Component: 850 - total flux cleaned = 0.00118715 Jy ! Component: 900 - total flux cleaned = 0.00116295 Jy ! Component: 950 - total flux cleaned = 0.00113833 Jy ! Component: 1000 - total flux cleaned = 0.00111445 Jy ! Component: 1050 - total flux cleaned = 0.00109107 Jy ! Component: 1100 - total flux cleaned = 0.00111442 Jy ! Component: 1150 - total flux cleaned = 0.00106815 Jy ! Component: 1200 - total flux cleaned = 0.000999876 Jy ! Component: 1250 - total flux cleaned = 0.000932406 Jy ! Component: 1300 - total flux cleaned = 0.000843125 Jy ! Component: 1350 - total flux cleaned = 0.000754978 Jy ! Component: 1400 - total flux cleaned = 0.000690064 Jy ! Component: 1450 - total flux cleaned = 0.000668712 Jy ! Component: 1500 - total flux cleaned = 0.000562219 Jy ! Component: 1550 - total flux cleaned = 0.000562578 Jy ! Component: 1600 - total flux cleaned = 0.000458255 Jy ! Component: 1650 - total flux cleaned = 0.000416838 Jy ! Component: 1700 - total flux cleaned = 0.000376045 Jy ! Component: 1750 - total flux cleaned = 0.000254769 Jy ! Component: 1800 - total flux cleaned = 0.000235278 Jy ! Component: 1850 - total flux cleaned = 0.000176107 Jy ! Component: 1900 - total flux cleaned = 0.000136776 Jy ! Component: 1950 - total flux cleaned = 3.96823e-05 Jy ! Component: 2000 - total flux cleaned = 3.96404e-05 Jy ! Component: 2050 - total flux cleaned = -3.66797e-05 Jy ! Component: 2100 - total flux cleaned = -9.36347e-05 Jy ! Component: 2150 - total flux cleaned = -0.000187209 Jy ! Component: 2200 - total flux cleaned = -0.000280007 Jy ! Component: 2250 - total flux cleaned = -0.000335147 Jy ! Component: 2300 - total flux cleaned = -0.00046274 Jy ! Component: 2350 - total flux cleaned = -0.000607361 Jy ! Component: 2400 - total flux cleaned = -0.000696999 Jy ! Component: 2450 - total flux cleaned = -0.000839299 Jy ! Component: 2500 - total flux cleaned = -0.000857097 Jy ! Component: 2550 - total flux cleaned = -0.000979657 Jy ! Component: 2600 - total flux cleaned = -0.0010838 Jy ! Component: 2650 - total flux cleaned = -0.00113557 Jy ! Component: 2700 - total flux cleaned = -0.00123814 Jy ! Component: 2750 - total flux cleaned = -0.00127201 Jy ! Component: 2800 - total flux cleaned = -0.00133925 Jy ! Component: 2850 - total flux cleaned = -0.00145636 Jy ! Component: 2900 - total flux cleaned = -0.00153944 Jy ! Component: 2950 - total flux cleaned = -0.00167111 Jy ! Component: 3000 - total flux cleaned = -0.00167119 Jy ! Component: 3050 - total flux cleaned = -0.00173631 Jy ! Component: 3100 - total flux cleaned = -0.0017848 Jy ! Component: 3150 - total flux cleaned = -0.00186482 Jy ! Component: 3200 - total flux cleaned = -0.00188066 Jy ! Component: 3250 - total flux cleaned = -0.0019755 Jy ! Component: 3300 - total flux cleaned = -0.00203843 Jy ! Component: 3350 - total flux cleaned = -0.00202276 Jy ! Component: 3400 - total flux cleaned = -0.00208489 Jy ! Component: 3450 - total flux cleaned = -0.00211558 Jy ! Component: 3500 - total flux cleaned = -0.00211572 Jy ! Component: 3550 - total flux cleaned = -0.0021463 Jy ! Component: 3600 - total flux cleaned = -0.00216144 Jy ! Component: 3650 - total flux cleaned = -0.00219164 Jy ! Component: 3700 - total flux cleaned = -0.00226646 Jy ! Component: 3750 - total flux cleaned = -0.00228126 Jy ! Component: 3800 - total flux cleaned = -0.00236999 Jy ! Component: 3850 - total flux cleaned = -0.00241402 Jy ! Component: 3900 - total flux cleaned = -0.002414 Jy ! Component: 3950 - total flux cleaned = -0.00245773 Jy ! Component: 4000 - total flux cleaned = -0.00247225 Jy ! Component: 4050 - total flux cleaned = -0.00254425 Jy ! Total flux subtracted in 4096 components = -0.00254417 Jy ! Clean residual min=-0.000766 max=0.000851 Jy/beam ! Clean residual mean=-0.000004 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.0776906 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 428 components and 0.0776906 Jy ![Exited script file: muppet] wmap "J0402+8241_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.524 x 6.06 at 45.69 degrees (North through East) ! Clean map min=-0.0016091 max=0.049593 Jy/beam ! Writing clean map to FITS file: J0402+8241_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0495934 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00026696 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.61489 1.61489 3.22978 6.45956 12.9191 25.8383 51.6765 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.524 x 6.06 at 45.69 degrees (North through East) ! Clean map min=-0.0016091 max=0.049593 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0402+8241_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:49:51 2019