! Started logfile: J0402+8241_S_2017_09_26_pus_uvs.log on Sat May 11 12:54:33 2019 obs J0402+8241_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0402+8241_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.881141 visibilities/baseline/integration-bin. ! Found source: J0402+8241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 37304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0402+8241_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 277 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1309 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985396Jy sigma=0.008529 ! Fit after self-cal, rms=0.955099Jy sigma=0.008280 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.441 mas, bmaj=9.305 mas, bpa=17.36 degrees ! Estimated noise=946.898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337642 Jy ! Component: 100 - total flux cleaned = 0.0417971 Jy ! Total flux subtracted in 100 components = 0.0417971 Jy ! Clean residual min=-0.003357 max=0.004800 Jy/beam ! Clean residual mean=-0.000052 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.0417971 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0417971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080880Jy sigma=0.000673 ! Fit after self-cal, rms=0.080079Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=10.33 mas, bpa=15.97 degrees ! Estimated noise=484.557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008869 Jy ! Component: 100 - total flux cleaned = 0.013244 Jy ! Component: 150 - total flux cleaned = 0.0157611 Jy ! Component: 200 - total flux cleaned = 0.0173377 Jy ! Total flux subtracted in 200 components = 0.0173377 Jy ! Clean residual min=-0.003901 max=0.005427 Jy/beam ! Clean residual mean=-0.000104 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 0.0591348 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 45 components and 0.0591348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079217Jy sigma=0.000657 ! Fit after self-cal, rms=0.079096Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.08 KP 1.15 ! LA 0.85 MK 1.05 NL 1.29 OV 1.08 ! PT 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.04 KP 1.15 ! LA 0.86 MK 1.06 NL 1.32 OV 1.16 ! PT 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 1.11 KP 1.05 ! LA 0.88 MK 1.10 NL 1.26 OV 0.99 ! PT 0.79 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00 KP 1.00* ! LA 0.85 MK 1.02 NL 1.00* OV 0.97 ! PT 0.72 ! ! ! Fit before self-cal, rms=0.079096Jy sigma=0.000656 ! Fit after self-cal, rms=0.083927Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=10.34 mas, bpa=16.35 degrees ! Estimated noise=484.628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.95808e-05 Jy ! Component: 100 - total flux cleaned = 3.7543e-05 Jy ! Component: 150 - total flux cleaned = 3.82064e-05 Jy ! Component: 200 - total flux cleaned = 3.87298e-05 Jy ! Total flux subtracted in 200 components = 3.87298e-05 Jy ! Clean residual min=-0.002981 max=0.004112 Jy/beam ! Clean residual mean=-0.000022 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.0591735 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0591735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083913Jy sigma=0.000650 ! Fit after self-cal, rms=0.084484Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084484Jy sigma=0.000648 ! Fit after self-cal, rms=0.088495Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=10.34 mas, bpa=16.83 degrees ! Estimated noise=489.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.1307e-05 Jy ! Component: 100 - total flux cleaned = 5.04332e-05 Jy ! Component: 150 - total flux cleaned = 7.24503e-05 Jy ! Component: 200 - total flux cleaned = 9.30259e-05 Jy ! Total flux subtracted in 200 components = 9.30259e-05 Jy ! Clean residual min=-0.002625 max=0.003500 Jy/beam ! Clean residual mean=-0.000024 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0592666 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.0592666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088483Jy sigma=0.000646 ! Fit after self-cal, rms=0.088783Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35.5, -45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310197 Jy ! Component: 100 - total flux cleaned = 0.00485574 Jy ! Component: 150 - total flux cleaned = 0.00607112 Jy ! Component: 200 - total flux cleaned = 0.00661896 Jy ! Total flux subtracted in 200 components = 0.00661896 Jy ! Clean residual min=-0.002112 max=0.002412 Jy/beam ! Clean residual mean=-0.000026 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0658855 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 88 components and 0.0658855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088661Jy sigma=0.000644 ! Fit after self-cal, rms=0.088582Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088582Jy sigma=0.000644 ! Fit after self-cal, rms=0.087995Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=10.29 mas, bpa=16.91 degrees ! Estimated noise=487.491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243873 Jy ! Component: 100 - total flux cleaned = 0.00381524 Jy ! Component: 150 - total flux cleaned = 0.00435459 Jy ! Component: 200 - total flux cleaned = 0.00449079 Jy ! Total flux subtracted in 200 components = 0.00449079 Jy ! Clean residual min=-0.001981 max=0.002382 Jy/beam ! Clean residual mean=-0.000017 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0703763 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 101 components and 0.0703763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087912Jy sigma=0.000643 ! Fit after self-cal, rms=0.087877Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162249 Jy ! Component: 100 - total flux cleaned = 0.00225068 Jy ! Component: 150 - total flux cleaned = 0.0023626 Jy ! Component: 200 - total flux cleaned = 0.00242661 Jy ! Total flux subtracted in 200 components = 0.00242661 Jy ! Clean residual min=-0.001965 max=0.002258 Jy/beam ! Clean residual mean=-0.000015 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0728029 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.0728029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087826Jy sigma=0.000642 ! Fit after self-cal, rms=0.087792Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087792Jy sigma=0.000642 ! Fit after self-cal, rms=0.085780Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.997 mas, bmaj=14.19 mas, bpa=10.01 degrees ! Estimated noise=562.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257083 Jy ! Component: 100 - total flux cleaned = 0.00373413 Jy ! Component: 150 - total flux cleaned = 0.00373771 Jy ! Component: 200 - total flux cleaned = 0.00367077 Jy ! Total flux subtracted in 200 components = 0.00367077 Jy ! Clean residual min=-0.002240 max=0.002902 Jy/beam ! Clean residual mean=-0.000025 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0764737 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 135 components and 0.0764737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085738Jy sigma=0.000641 ! Fit after self-cal, rms=0.085657Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133569 Jy ! Component: 100 - total flux cleaned = 0.00148703 Jy ! Component: 150 - total flux cleaned = 0.0013796 Jy ! Component: 200 - total flux cleaned = 0.00131725 Jy ! Total flux subtracted in 200 components = 0.00131725 Jy ! Clean residual min=-0.002209 max=0.002778 Jy/beam ! Clean residual mean=-0.000025 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0777909 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.0777909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085636Jy sigma=0.000641 ! Fit after self-cal, rms=0.085618Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=10.26 mas, bpa=16.94 degrees ! Estimated noise=483.279 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 10.26 at 16.94 degrees (North through East) ! Clean map min=-0.002 max=0.047666 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.495 mas, bmaj=9.082 mas, bpa=18.08 degrees ! Estimated noise=983.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350171 Jy ! Component: 100 - total flux cleaned = 0.0450501 Jy ! Component: 150 - total flux cleaned = 0.051258 Jy ! Component: 200 - total flux cleaned = 0.0558931 Jy ! Total flux subtracted in 200 components = 0.0558931 Jy ! Clean residual min=-0.003462 max=0.003514 Jy/beam ! Clean residual mean=-0.000022 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0558931 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0558931 Jy ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=10.26 mas, bpa=16.94 degrees ! Estimated noise=483.279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561921 Jy ! Component: 100 - total flux cleaned = 0.00974498 Jy ! Component: 150 - total flux cleaned = 0.0129655 Jy ! Component: 200 - total flux cleaned = 0.0155149 Jy ! Total flux subtracted in 200 components = 0.0155149 Jy ! Clean residual min=-0.002442 max=0.002231 Jy/beam ! Clean residual mean=-0.000038 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.071408 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 58 components and 0.071408 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.997 mas, bmaj=14.19 mas, bpa=10.01 degrees ! Estimated noise=562.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030197 Jy ! Component: 100 - total flux cleaned = 0.00472189 Jy ! Component: 150 - total flux cleaned = 0.00505017 Jy ! Component: 200 - total flux cleaned = 0.00538982 Jy ! Total flux subtracted in 200 components = 0.00538982 Jy ! Clean residual min=-0.002380 max=0.002672 Jy/beam ! Clean residual mean=-0.000042 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0767978 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024658 Jy ! Component: 100 - total flux cleaned = 0.00046442 Jy ! Component: 150 - total flux cleaned = 0.000656798 Jy ! Component: 200 - total flux cleaned = 0.000794189 Jy ! Total flux subtracted in 200 components = 0.000794189 Jy ! Clean residual min=-0.002280 max=0.002573 Jy/beam ! Clean residual mean=-0.000034 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.077592 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 100 components and 0.077592 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=10.26 mas, bpa=16.94 degrees ! Estimated noise=483.279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446669 Jy ! Component: 100 - total flux cleaned = 0.000371888 Jy ! Component: 150 - total flux cleaned = 0.000438461 Jy ! Component: 200 - total flux cleaned = 0.000525558 Jy ! Total flux subtracted in 200 components = 0.000525558 Jy ! Clean residual min=-0.001975 max=0.002243 Jy/beam ! Clean residual mean=-0.000017 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0781176 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 119 components and 0.0781176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085601Jy sigma=0.000640 ! Fit after self-cal, rms=0.085553Jy sigma=0.000640 wmodel J0402+8241_S_2017_09_26_pus_map.mod ! Writing 119 model components to file: J0402+8241_S_2017_09_26_pus_map.mod wobs J0402+8241_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0402+8241_S_2017_09_26_pus_uvs.fits wwins J0402+8241_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0402+8241_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000784878 Jy ! Component: 100 - total flux cleaned = 0.00117611 Jy ! Component: 150 - total flux cleaned = 0.00141803 Jy ! Component: 200 - total flux cleaned = 0.00153234 Jy ! Component: 250 - total flux cleaned = 0.00166857 Jy ! Component: 300 - total flux cleaned = 0.00177247 Jy ! Component: 350 - total flux cleaned = 0.00189644 Jy ! Component: 400 - total flux cleaned = 0.00196823 Jy ! Component: 450 - total flux cleaned = 0.00208314 Jy ! Component: 500 - total flux cleaned = 0.00212703 Jy ! Component: 550 - total flux cleaned = 0.00219054 Jy ! Component: 600 - total flux cleaned = 0.00221089 Jy ! Component: 650 - total flux cleaned = 0.00225104 Jy ! Component: 700 - total flux cleaned = 0.00223177 Jy ! Component: 750 - total flux cleaned = 0.00225064 Jy ! Component: 800 - total flux cleaned = 0.00223192 Jy ! Component: 850 - total flux cleaned = 0.00223196 Jy ! Component: 900 - total flux cleaned = 0.00219616 Jy ! Component: 950 - total flux cleaned = 0.00217868 Jy ! Component: 1000 - total flux cleaned = 0.00212795 Jy ! Component: 1050 - total flux cleaned = 0.0021617 Jy ! Component: 1100 - total flux cleaned = 0.00216152 Jy ! Component: 1150 - total flux cleaned = 0.00216159 Jy ! Component: 1200 - total flux cleaned = 0.00217757 Jy ! Component: 1250 - total flux cleaned = 0.00217734 Jy ! Component: 1300 - total flux cleaned = 0.00219221 Jy ! Component: 1350 - total flux cleaned = 0.00214715 Jy ! Component: 1400 - total flux cleaned = 0.00211764 Jy ! Component: 1450 - total flux cleaned = 0.00208879 Jy ! Component: 1500 - total flux cleaned = 0.0020606 Jy ! Component: 1550 - total flux cleaned = 0.00207415 Jy ! Component: 1600 - total flux cleaned = 0.00203309 Jy ! Component: 1650 - total flux cleaned = 0.00205997 Jy ! Component: 1700 - total flux cleaned = 0.00208628 Jy ! Component: 1750 - total flux cleaned = 0.00208618 Jy ! Component: 1800 - total flux cleaned = 0.00209904 Jy ! Component: 1850 - total flux cleaned = 0.00218789 Jy ! Component: 1900 - total flux cleaned = 0.00218758 Jy ! Component: 1950 - total flux cleaned = 0.00217507 Jy ! Component: 2000 - total flux cleaned = 0.00218752 Jy ! Component: 2050 - total flux cleaned = 0.00221153 Jy ! Component: 2100 - total flux cleaned = 0.00222331 Jy ! Component: 2150 - total flux cleaned = 0.00220011 Jy ! Component: 2200 - total flux cleaned = 0.0022231 Jy ! Component: 2250 - total flux cleaned = 0.00220037 Jy ! Component: 2300 - total flux cleaned = 0.0022005 Jy ! Component: 2350 - total flux cleaned = 0.00221184 Jy ! Component: 2400 - total flux cleaned = 0.00221186 Jy ! Component: 2450 - total flux cleaned = 0.00221188 Jy ! Component: 2500 - total flux cleaned = 0.00221166 Jy ! Component: 2550 - total flux cleaned = 0.00217973 Jy ! Component: 2600 - total flux cleaned = 0.00215874 Jy ! Component: 2650 - total flux cleaned = 0.00216918 Jy ! Component: 2700 - total flux cleaned = 0.00215885 Jy ! Component: 2750 - total flux cleaned = 0.00214868 Jy ! Component: 2800 - total flux cleaned = 0.00213856 Jy ! Component: 2850 - total flux cleaned = 0.00209884 Jy ! Component: 2900 - total flux cleaned = 0.0021284 Jy ! Component: 2950 - total flux cleaned = 0.00210885 Jy ! Component: 3000 - total flux cleaned = 0.00210886 Jy ! Component: 3050 - total flux cleaned = 0.00211837 Jy ! Component: 3100 - total flux cleaned = 0.00210894 Jy ! Component: 3150 - total flux cleaned = 0.00209015 Jy ! Component: 3200 - total flux cleaned = 0.00209018 Jy ! Component: 3250 - total flux cleaned = 0.00209025 Jy ! Component: 3300 - total flux cleaned = 0.00207205 Jy ! Component: 3350 - total flux cleaned = 0.00204493 Jy ! Component: 3400 - total flux cleaned = 0.0020271 Jy ! Component: 3450 - total flux cleaned = 0.00202717 Jy ! Component: 3500 - total flux cleaned = 0.00202718 Jy ! Component: 3550 - total flux cleaned = 0.00200963 Jy ! Component: 3600 - total flux cleaned = 0.00200961 Jy ! Component: 3650 - total flux cleaned = 0.00200951 Jy ! Component: 3700 - total flux cleaned = 0.00201809 Jy ! Component: 3750 - total flux cleaned = 0.00202653 Jy ! Component: 3800 - total flux cleaned = 0.00201814 Jy ! Component: 3850 - total flux cleaned = 0.00201816 Jy ! Component: 3900 - total flux cleaned = 0.00201825 Jy ! Component: 3950 - total flux cleaned = 0.00200178 Jy ! Component: 4000 - total flux cleaned = 0.00200996 Jy ! Component: 4050 - total flux cleaned = 0.00200998 Jy ! Total flux subtracted in 4096 components = 0.00200188 Jy ! Clean residual min=-0.000437 max=0.000478 Jy/beam ! Clean residual mean=0.000001 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0801195 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 417 components and 0.0801195 Jy ![Exited script file: muppet] wmap "J0402+8241_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 10.26 at 16.94 degrees (North through East) ! Clean map min=-0.0021002 max=0.047516 Jy/beam ! Writing clean map to FITS file: J0402+8241_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0475159 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148389 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.93688 0.93688 1.87376 3.74752 7.49504 14.9901 29.9802 59.9603 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 10.26 at 16.94 degrees (North through East) ! Clean map min=-0.0021002 max=0.047516 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0402+8241_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:54:39 2019