! Started logfile: J0401+2110_S_2017_02_19_pus_uvs.log on Sat May 4 18:41:36 2019 obs J0401+2110_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0401+2110_S_2017_02_19_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706667 visibilities/baseline/integration-bin. ! Found source: J0401+2110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0401+2110_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.732959Jy sigma=0.007001 ! Fit after self-cal, rms=0.730436Jy sigma=0.006982 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=6.793 mas, bpa=-2.73 degrees ! Estimated noise=2608.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209097 Jy ! Component: 100 - total flux cleaned = 0.254773 Jy ! Total flux subtracted in 100 components = 0.254773 Jy ! Clean residual min=-0.012524 max=0.013504 Jy/beam ! Clean residual mean=-0.000000 rms=0.003357 Jy/beam ! Combined flux in latest and established models = 0.254773 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.254773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094060Jy sigma=0.000776 ! Fit after self-cal, rms=0.094059Jy sigma=0.000776 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=7.294 mas, bpa=-1.48 degrees ! Estimated noise=2314.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147431 Jy ! Component: 100 - total flux cleaned = 0.0217649 Jy ! Component: 150 - total flux cleaned = 0.0264004 Jy ! Component: 200 - total flux cleaned = 0.0296772 Jy ! Total flux subtracted in 200 components = 0.0296772 Jy ! Clean residual min=-0.010137 max=0.009884 Jy/beam ! Clean residual mean=-0.000007 rms=0.002689 Jy/beam ! Combined flux in latest and established models = 0.28445 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 0.28445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090602Jy sigma=0.000761 ! Fit after self-cal, rms=0.090608Jy sigma=0.000761 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.00 KP 1.03 ! LA 0.99 MK 1.01 NL 0.85 OV 1.03 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.98 KP 1.04 ! LA 1.00 MK 1.01 NL 1.07 OV 1.08 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 1.01 KP 0.89 ! LA 0.78 MK 0.98 NL 1.26 OV 1.01 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.05 HN 0.93 KP 1.00* ! LA 0.59 MK 1.19 NL 1.00* OV 1.04 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.090608Jy sigma=0.000761 ! Fit after self-cal, rms=0.074879Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.345 mas, bpa=-1.399 degrees ! Estimated noise=2307.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193588 Jy ! Component: 100 - total flux cleaned = -0.00238392 Jy ! Component: 150 - total flux cleaned = -0.00260868 Jy ! Component: 200 - total flux cleaned = -0.00264275 Jy ! Total flux subtracted in 200 components = -0.00264275 Jy ! Clean residual min=-0.005768 max=0.005054 Jy/beam ! Clean residual mean=0.000004 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.281807 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.281807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074809Jy sigma=0.000684 ! Fit after self-cal, rms=0.074734Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074734Jy sigma=0.000683 ! Fit after self-cal, rms=0.074746Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.351 mas, bpa=-1.39 degrees ! Estimated noise=2308.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000791238 Jy ! Component: 100 - total flux cleaned = -0.000923686 Jy ! Component: 150 - total flux cleaned = -0.00101238 Jy ! Component: 200 - total flux cleaned = -0.00109349 Jy ! Total flux subtracted in 200 components = -0.00109349 Jy ! Clean residual min=-0.005787 max=0.004999 Jy/beam ! Clean residual mean=0.000004 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.280714 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.280714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074713Jy sigma=0.000683 ! Fit after self-cal, rms=0.074714Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.92823e-05 Jy ! Component: 100 - total flux cleaned = -0.000137251 Jy ! Component: 150 - total flux cleaned = -0.000233626 Jy ! Component: 200 - total flux cleaned = -0.000301354 Jy ! Total flux subtracted in 200 components = -0.000301354 Jy ! Clean residual min=-0.005787 max=0.004973 Jy/beam ! Clean residual mean=0.000004 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.280412 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.280412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074695Jy sigma=0.000683 ! Fit after self-cal, rms=0.074696Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074696Jy sigma=0.000683 ! Fit after self-cal, rms=0.074687Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=7.357 mas, bpa=-1.424 degrees ! Estimated noise=2308.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392057 Jy ! Component: 100 - total flux cleaned = -0.000463719 Jy ! Component: 150 - total flux cleaned = -0.000551379 Jy ! Component: 200 - total flux cleaned = -0.000612554 Jy ! Total flux subtracted in 200 components = -0.000612554 Jy ! Clean residual min=-0.005810 max=0.004957 Jy/beam ! Clean residual mean=0.000004 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.2798 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.2798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074669Jy sigma=0.000683 ! Fit after self-cal, rms=0.074670Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.87899e-05 Jy ! Component: 100 - total flux cleaned = -4.93552e-05 Jy ! Component: 150 - total flux cleaned = -6.87882e-05 Jy ! Component: 200 - total flux cleaned = -6.84321e-05 Jy ! Total flux subtracted in 200 components = -6.84321e-05 Jy ! Clean residual min=-0.005813 max=0.004918 Jy/beam ! Clean residual mean=0.000004 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.279732 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.279732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074659Jy sigma=0.000683 ! Fit after self-cal, rms=0.074661Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074661Jy sigma=0.000683 ! Fit after self-cal, rms=0.074645Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.64 mas, bmaj=9.462 mas, bpa=1.92 degrees ! Estimated noise=3122.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000951471 Jy ! Component: 100 - total flux cleaned = 0.00105974 Jy ! Component: 150 - total flux cleaned = 0.00108934 Jy ! Component: 200 - total flux cleaned = 0.00111778 Jy ! Total flux subtracted in 200 components = 0.00111778 Jy ! Clean residual min=-0.005738 max=0.005280 Jy/beam ! Clean residual mean=0.000011 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.280849 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.280849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074647Jy sigma=0.000683 ! Fit after self-cal, rms=0.074645Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.4656e-05 Jy ! Component: 100 - total flux cleaned = 0.000109061 Jy ! Component: 150 - total flux cleaned = 0.00012328 Jy ! Component: 200 - total flux cleaned = 0.000136958 Jy ! Total flux subtracted in 200 components = 0.000136958 Jy ! Clean residual min=-0.005747 max=0.005269 Jy/beam ! Clean residual mean=0.000011 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.280986 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.280986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074644Jy sigma=0.000683 ! Fit after self-cal, rms=0.074644Jy sigma=0.000683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.361 mas, bpa=-1.456 degrees ! Estimated noise=2307.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.821 x 7.361 at -1.456 degrees (North through East) ! Clean map min=-0.0056324 max=0.26693 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=6.823 mas, bpa=-2.597 degrees ! Estimated noise=2596.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208134 Jy ! Component: 100 - total flux cleaned = 0.253732 Jy ! Component: 150 - total flux cleaned = 0.266143 Jy ! Component: 200 - total flux cleaned = 0.271086 Jy ! Total flux subtracted in 200 components = 0.271086 Jy ! Clean residual min=-0.006313 max=0.006336 Jy/beam ! Clean residual mean=0.000005 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.271085 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.271085 Jy ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.361 mas, bpa=-1.456 degrees ! Estimated noise=2307.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378382 Jy ! Component: 100 - total flux cleaned = 0.004767 Jy ! Component: 150 - total flux cleaned = 0.00560021 Jy ! Component: 200 - total flux cleaned = 0.00621679 Jy ! Total flux subtracted in 200 components = 0.00621679 Jy ! Clean residual min=-0.005809 max=0.005172 Jy/beam ! Clean residual mean=0.000004 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.277302 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.277302 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.64 mas, bmaj=9.462 mas, bpa=1.92 degrees ! Estimated noise=3122.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230546 Jy ! Component: 100 - total flux cleaned = 0.00294928 Jy ! Component: 150 - total flux cleaned = 0.00307664 Jy ! Component: 200 - total flux cleaned = 0.00317407 Jy ! Total flux subtracted in 200 components = 0.00317407 Jy ! Clean residual min=-0.005842 max=0.005242 Jy/beam ! Clean residual mean=0.000011 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.280476 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.48329e-05 Jy ! Component: 100 - total flux cleaned = 6.84696e-05 Jy ! Component: 150 - total flux cleaned = 0.000101235 Jy ! Component: 200 - total flux cleaned = 0.000132984 Jy ! Total flux subtracted in 200 components = 0.000132984 Jy ! Clean residual min=-0.005807 max=0.005245 Jy/beam ! Clean residual mean=0.000011 rms=0.001648 Jy/beam ! Combined flux in latest and established models = 0.280609 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.280609 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.361 mas, bpa=-1.456 degrees ! Estimated noise=2307.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121758 Jy ! Component: 100 - total flux cleaned = -0.000299931 Jy ! Component: 150 - total flux cleaned = -0.000338271 Jy ! Component: 200 - total flux cleaned = -0.000375559 Jy ! Total flux subtracted in 200 components = -0.000375559 Jy ! Clean residual min=-0.005743 max=0.005112 Jy/beam ! Clean residual mean=0.000004 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.280234 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.280234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074691Jy sigma=0.000683 ! Fit after self-cal, rms=0.074691Jy sigma=0.000683 wmodel J0401+2110_S_2017_02_19_pus_map.mod ! Writing 52 model components to file: J0401+2110_S_2017_02_19_pus_map.mod wobs J0401+2110_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0401+2110_S_2017_02_19_pus_uvs.fits wwins J0401+2110_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0401+2110_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000488474 Jy ! Component: 100 - total flux cleaned = -0.00015026 Jy ! Component: 150 - total flux cleaned = 0.000718864 Jy ! Component: 200 - total flux cleaned = 0.0014718 Jy ! Component: 250 - total flux cleaned = 0.00211761 Jy ! Component: 300 - total flux cleaned = 0.00246187 Jy ! Component: 350 - total flux cleaned = 0.00285912 Jy ! Component: 400 - total flux cleaned = 0.00298596 Jy ! Component: 450 - total flux cleaned = 0.00329795 Jy ! Component: 500 - total flux cleaned = 0.00347882 Jy ! Component: 550 - total flux cleaned = 0.00353774 Jy ! Component: 600 - total flux cleaned = 0.00353866 Jy ! Component: 650 - total flux cleaned = 0.00342711 Jy ! Component: 700 - total flux cleaned = 0.00321156 Jy ! Component: 750 - total flux cleaned = 0.00321226 Jy ! Component: 800 - total flux cleaned = 0.00305697 Jy ! Component: 850 - total flux cleaned = 0.00305643 Jy ! Component: 900 - total flux cleaned = 0.00310579 Jy ! Component: 950 - total flux cleaned = 0.00310631 Jy ! Component: 1000 - total flux cleaned = 0.00315492 Jy ! Component: 1050 - total flux cleaned = 0.00329357 Jy ! Component: 1100 - total flux cleaned = 0.00329332 Jy ! Component: 1150 - total flux cleaned = 0.00338165 Jy ! Component: 1200 - total flux cleaned = 0.00338109 Jy ! Component: 1250 - total flux cleaned = 0.00346614 Jy ! Component: 1300 - total flux cleaned = 0.00359093 Jy ! Component: 1350 - total flux cleaned = 0.0037129 Jy ! Component: 1400 - total flux cleaned = 0.00383248 Jy ! Component: 1450 - total flux cleaned = 0.00395052 Jy ! Component: 1500 - total flux cleaned = 0.00402735 Jy ! Component: 1550 - total flux cleaned = 0.00406466 Jy ! Component: 1600 - total flux cleaned = 0.00391502 Jy ! Component: 1650 - total flux cleaned = 0.00395228 Jy ! Component: 1700 - total flux cleaned = 0.00395282 Jy ! Component: 1750 - total flux cleaned = 0.00406107 Jy ! Component: 1800 - total flux cleaned = 0.00409646 Jy ! Component: 1850 - total flux cleaned = 0.0040964 Jy ! Component: 1900 - total flux cleaned = 0.00413099 Jy ! Component: 1950 - total flux cleaned = 0.00416528 Jy ! Component: 2000 - total flux cleaned = 0.00413187 Jy ! Component: 2050 - total flux cleaned = 0.00419865 Jy ! Component: 2100 - total flux cleaned = 0.00429657 Jy ! Component: 2150 - total flux cleaned = 0.00436093 Jy ! Component: 2200 - total flux cleaned = 0.00436115 Jy ! Component: 2250 - total flux cleaned = 0.00439267 Jy ! Component: 2300 - total flux cleaned = 0.00436178 Jy ! Component: 2350 - total flux cleaned = 0.00426975 Jy ! Component: 2400 - total flux cleaned = 0.0042389 Jy ! Component: 2450 - total flux cleaned = 0.00402786 Jy ! Component: 2500 - total flux cleaned = 0.00402815 Jy ! Component: 2550 - total flux cleaned = 0.00385075 Jy ! Component: 2600 - total flux cleaned = 0.00379203 Jy ! Component: 2650 - total flux cleaned = 0.00361744 Jy ! Component: 2700 - total flux cleaned = 0.00350206 Jy ! Component: 2750 - total flux cleaned = 0.00341605 Jy ! Component: 2800 - total flux cleaned = 0.0032174 Jy ! Component: 2850 - total flux cleaned = 0.00307684 Jy ! Component: 2900 - total flux cleaned = 0.0029931 Jy ! Component: 2950 - total flux cleaned = 0.00285469 Jy ! Component: 3000 - total flux cleaned = 0.00274462 Jy ! Component: 3050 - total flux cleaned = 0.00266252 Jy ! Component: 3100 - total flux cleaned = 0.0024996 Jy ! Component: 3150 - total flux cleaned = 0.00244601 Jy ! Component: 3200 - total flux cleaned = 0.00236575 Jy ! Component: 3250 - total flux cleaned = 0.00223271 Jy ! Component: 3300 - total flux cleaned = 0.00212699 Jy ! Component: 3350 - total flux cleaned = 0.00202185 Jy ! Component: 3400 - total flux cleaned = 0.00196944 Jy ! Component: 3450 - total flux cleaned = 0.00183966 Jy ! Component: 3500 - total flux cleaned = 0.00173648 Jy ! Component: 3550 - total flux cleaned = 0.00165932 Jy ! Component: 3600 - total flux cleaned = 0.00150592 Jy ! Component: 3650 - total flux cleaned = 0.00140431 Jy ! Component: 3700 - total flux cleaned = 0.00120233 Jy ! Component: 3750 - total flux cleaned = 0.00112703 Jy ! Component: 3800 - total flux cleaned = 0.00105215 Jy ! Component: 3850 - total flux cleaned = 0.00097759 Jy ! Component: 3900 - total flux cleaned = 0.000928048 Jy ! Component: 3950 - total flux cleaned = 0.000878734 Jy ! Component: 4000 - total flux cleaned = 0.000780645 Jy ! Component: 4050 - total flux cleaned = 0.000780659 Jy ! Total flux subtracted in 4096 components = 0.000658915 Jy ! Clean residual min=-0.001896 max=0.001619 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.280893 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 322 components and 0.280893 Jy ![Exited script file: muppet] wmap "J0401+2110_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.821 x 7.361 at -1.456 degrees (North through East) ! Clean map min=-0.0028542 max=0.26734 Jy/beam ! Writing clean map to FITS file: J0401+2110_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.267342 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000408359 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.458242 0.458242 0.916485 1.83297 3.66594 7.33188 14.6638 29.3275 58.655 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.267 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.821 x 7.361 at -1.456 degrees (North through East) ! Clean map min=-0.0028542 max=0.26734 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0401+2110_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:41:40 2019