! Started logfile: J0400+0550_S_2017_05_27_pus_uvs.log on Fri May 3 10:56:40 2019 obs J0400+0550_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0400+0550_S_2017_05_27_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.957143 visibilities/baseline/integration-bin. ! Found source: J0400+0550 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 14472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0400+0550_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 441 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.803393Jy sigma=0.046022 ! Fit after self-cal, rms=0.801677Jy sigma=0.046004 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.509 mas, bmaj=6.381 mas, bpa=-5.092 degrees ! Estimated noise=451.159 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670014 Jy ! Component: 100 - total flux cleaned = 0.0942463 Jy ! Total flux subtracted in 100 components = 0.0942463 Jy ! Clean residual min=-0.021522 max=0.036825 Jy/beam ! Clean residual mean=0.000031 rms=0.006917 Jy/beam ! Combined flux in latest and established models = 0.0942463 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0942463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207857Jy sigma=0.003476 ! Fit after self-cal, rms=0.207527Jy sigma=0.003475 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=7.223 mas, bpa=-6.068 degrees ! Estimated noise=392.376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418133 Jy ! Component: 100 - total flux cleaned = 0.0697482 Jy ! Component: 150 - total flux cleaned = 0.0910876 Jy ! Component: 200 - total flux cleaned = 0.103813 Jy ! Total flux subtracted in 200 components = 0.103813 Jy ! Clean residual min=-0.019357 max=0.034087 Jy/beam ! Clean residual mean=0.000046 rms=0.006485 Jy/beam ! Combined flux in latest and established models = 0.198059 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 52 components and 0.198059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184780Jy sigma=0.003318 ! Fit after self-cal, rms=0.182501Jy sigma=0.003308 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 0.72 HN 0.66 KP 0.81 ! LA 0.83 MK 0.56 NL 0.70 OV 0.80 ! PT 0.88 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 19.58 FD 0.78 HN 0.67 KP 0.79 ! LA 0.81 MK 0.51 NL 0.80 OV 0.81 ! PT 0.86 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.57 FD 0.78 HN 0.70 KP 0.82 ! LA 0.84 MK 19.10 NL 0.73 OV 0.75 ! PT 0.85 SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.74 HN 0.56 KP 1.00* ! LA 0.82 MK 0.52 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.182501Jy sigma=0.003308 ! Fit after self-cal, rms=1.341480Jy sigma=0.000866 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.218 mas, bmaj=7.976 mas, bpa=-5.747 degrees ! Estimated noise=504.391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138243 Jy ! Component: 100 - total flux cleaned = -0.00100677 Jy ! Component: 150 - total flux cleaned = -0.00326294 Jy ! Component: 200 - total flux cleaned = -0.00453397 Jy ! Total flux subtracted in 200 components = -0.00453397 Jy ! Clean residual min=-0.005467 max=0.004917 Jy/beam ! Clean residual mean=-0.000002 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.193525 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.193525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.337646Jy sigma=0.000842 ! Fit after self-cal, rms=1.337565Jy sigma=0.000807 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.337565Jy sigma=0.000807 ! Fit after self-cal, rms=0.947224Jy sigma=0.000744 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=7.952 mas, bpa=-5.957 degrees ! Estimated noise=512.408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106126 Jy ! Component: 100 - total flux cleaned = 0.000575634 Jy ! Component: 150 - total flux cleaned = -0.000307189 Jy ! Component: 200 - total flux cleaned = -0.00110397 Jy ! Total flux subtracted in 200 components = -0.00110397 Jy ! Clean residual min=-0.003438 max=0.003863 Jy/beam ! Clean residual mean=-0.000004 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.192421 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 0.192421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.945755Jy sigma=0.000737 ! Fit after self-cal, rms=0.945754Jy sigma=0.000736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114143 Jy ! Component: 100 - total flux cleaned = -0.00179688 Jy ! Component: 150 - total flux cleaned = -0.00229045 Jy ! Component: 200 - total flux cleaned = -0.00274545 Jy ! Total flux subtracted in 200 components = -0.00274545 Jy ! Clean residual min=-0.003330 max=0.003690 Jy/beam ! Clean residual mean=-0.000002 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.189676 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.189676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.945086Jy sigma=0.000735 ! Fit after self-cal, rms=0.945082Jy sigma=0.000735 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.945082Jy sigma=0.000735 ! Fit after self-cal, rms=0.057564Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=7.906 mas, bpa=-6.212 degrees ! Estimated noise=506.245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000775489 Jy ! Component: 100 - total flux cleaned = -0.00109799 Jy ! Component: 150 - total flux cleaned = -0.00133057 Jy ! Component: 200 - total flux cleaned = -0.00154115 Jy ! Total flux subtracted in 200 components = -0.00154115 Jy ! Clean residual min=-0.002081 max=0.001751 Jy/beam ! Clean residual mean=0.000000 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.188134 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.188134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057391Jy sigma=0.000673 ! Fit after self-cal, rms=0.057337Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000471721 Jy ! Component: 100 - total flux cleaned = -0.000616818 Jy ! Component: 150 - total flux cleaned = -0.000750037 Jy ! Component: 200 - total flux cleaned = -0.000916612 Jy ! Total flux subtracted in 200 components = -0.000916612 Jy ! Clean residual min=-0.001822 max=0.001754 Jy/beam ! Clean residual mean=0.000001 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.187218 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.187218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057256Jy sigma=0.000671 ! Fit after self-cal, rms=0.057254Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057254Jy sigma=0.000671 ! Fit after self-cal, rms=0.057440Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.248 mas, bmaj=11.86 mas, bpa=-5.694 degrees ! Estimated noise=650.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150323 Jy ! Component: 100 - total flux cleaned = -0.00173062 Jy ! Component: 150 - total flux cleaned = -0.00175656 Jy ! Component: 200 - total flux cleaned = -0.0017184 Jy ! Total flux subtracted in 200 components = -0.0017184 Jy ! Clean residual min=-0.001599 max=0.001761 Jy/beam ! Clean residual mean=0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.185499 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 109 components and 0.1855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057416Jy sigma=0.000671 ! Fit after self-cal, rms=0.057414Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199758 Jy ! Component: 100 - total flux cleaned = -0.00023635 Jy ! Component: 150 - total flux cleaned = -0.000206027 Jy ! Component: 200 - total flux cleaned = -0.0001929 Jy ! Total flux subtracted in 200 components = -0.0001929 Jy ! Clean residual min=-0.001560 max=0.001781 Jy/beam ! Clean residual mean=0.000002 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.185307 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 0.185307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057404Jy sigma=0.000671 ! Fit after self-cal, rms=0.057403Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.892 mas, bpa=-6.155 degrees ! Estimated noise=506.589 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 7.892 at -6.155 degrees (North through East) ! Clean map min=-0.0021941 max=0.11903 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=7.078 mas, bpa=-7.041 degrees ! Estimated noise=613.176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0914394 Jy ! Component: 100 - total flux cleaned = 0.124391 Jy ! Component: 150 - total flux cleaned = 0.14308 Jy ! Component: 200 - total flux cleaned = 0.154659 Jy ! Total flux subtracted in 200 components = 0.154659 Jy ! Clean residual min=-0.003089 max=0.006312 Jy/beam ! Clean residual mean=0.000012 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.154659 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.154659 Jy ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.892 mas, bpa=-6.155 degrees ! Estimated noise=506.589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114311 Jy ! Component: 100 - total flux cleaned = 0.018369 Jy ! Component: 150 - total flux cleaned = 0.0228076 Jy ! Component: 200 - total flux cleaned = 0.0257314 Jy ! Total flux subtracted in 200 components = 0.0257314 Jy ! Clean residual min=-0.001842 max=0.002463 Jy/beam ! Clean residual mean=0.000007 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.180391 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 59 components and 0.180391 Jy ! Inverting map ! Added new window around map position (-5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237638 Jy ! Component: 100 - total flux cleaned = 0.00322061 Jy ! Component: 150 - total flux cleaned = 0.00389031 Jy ! Component: 200 - total flux cleaned = 0.00435705 Jy ! Total flux subtracted in 200 components = 0.00435705 Jy ! Clean residual min=-0.001560 max=0.001407 Jy/beam ! Clean residual mean=0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.184748 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 76 components and 0.184748 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.248 mas, bmaj=11.86 mas, bpa=-5.694 degrees ! Estimated noise=650.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566344 Jy ! Component: 100 - total flux cleaned = 0.000880089 Jy ! Component: 150 - total flux cleaned = 0.00100722 Jy ! Component: 200 - total flux cleaned = 0.00105175 Jy ! Total flux subtracted in 200 components = 0.00105175 Jy ! Clean residual min=-0.001609 max=0.001700 Jy/beam ! Clean residual mean=0.000002 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.1858 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.40501e-07 Jy ! Component: 100 - total flux cleaned = 3.89744e-05 Jy ! Component: 150 - total flux cleaned = 7.3327e-05 Jy ! Component: 200 - total flux cleaned = 7.39396e-05 Jy ! Total flux subtracted in 200 components = 7.39396e-05 Jy ! Clean residual min=-0.001577 max=0.001674 Jy/beam ! Clean residual mean=0.000002 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.185874 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 122 components and 0.185874 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.892 mas, bpa=-6.155 degrees ! Estimated noise=506.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466229 Jy ! Component: 100 - total flux cleaned = -0.000467344 Jy ! Component: 150 - total flux cleaned = -0.000468286 Jy ! Component: 200 - total flux cleaned = -0.000396055 Jy ! Total flux subtracted in 200 components = -0.000396055 Jy ! Clean residual min=-0.001447 max=0.001389 Jy/beam ! Clean residual mean=0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.185478 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 142 components and 0.185478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057133Jy sigma=0.000668 ! Fit after self-cal, rms=0.057119Jy sigma=0.000668 wmodel J0400+0550_S_2017_05_27_pus_map.mod ! Writing 142 model components to file: J0400+0550_S_2017_05_27_pus_map.mod wobs J0400+0550_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0400+0550_S_2017_05_27_pus_uvs.fits wwins J0400+0550_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0400+0550_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103948 Jy ! Component: 100 - total flux cleaned = -0.000105461 Jy ! Component: 150 - total flux cleaned = -8.46199e-05 Jy ! Component: 200 - total flux cleaned = 0.000106683 Jy ! Component: 250 - total flux cleaned = 0.000333354 Jy ! Component: 300 - total flux cleaned = 0.000614373 Jy ! Component: 350 - total flux cleaned = 0.000849426 Jy ! Component: 400 - total flux cleaned = 0.00098343 Jy ! Component: 450 - total flux cleaned = 0.00100211 Jy ! Component: 500 - total flux cleaned = 0.00107629 Jy ! Component: 550 - total flux cleaned = 0.00109455 Jy ! Component: 600 - total flux cleaned = 0.00116632 Jy ! Component: 650 - total flux cleaned = 0.00120195 Jy ! Component: 700 - total flux cleaned = 0.00130597 Jy ! Component: 750 - total flux cleaned = 0.00127194 Jy ! Component: 800 - total flux cleaned = 0.00133937 Jy ! Component: 850 - total flux cleaned = 0.00128931 Jy ! Component: 900 - total flux cleaned = 0.00133857 Jy ! Component: 950 - total flux cleaned = 0.00130597 Jy ! Component: 1000 - total flux cleaned = 0.00130574 Jy ! Component: 1050 - total flux cleaned = 0.00133711 Jy ! Component: 1100 - total flux cleaned = 0.00130564 Jy ! Component: 1150 - total flux cleaned = 0.00135217 Jy ! Component: 1200 - total flux cleaned = 0.00133705 Jy ! Component: 1250 - total flux cleaned = 0.0012917 Jy ! Component: 1300 - total flux cleaned = 0.00127685 Jy ! Component: 1350 - total flux cleaned = 0.00127701 Jy ! Component: 1400 - total flux cleaned = 0.00132102 Jy ! Component: 1450 - total flux cleaned = 0.00127789 Jy ! Component: 1500 - total flux cleaned = 0.0012922 Jy ! Component: 1550 - total flux cleaned = 0.00126417 Jy ! Component: 1600 - total flux cleaned = 0.00127834 Jy ! Component: 1650 - total flux cleaned = 0.00129209 Jy ! Component: 1700 - total flux cleaned = 0.00125073 Jy ! Component: 1750 - total flux cleaned = 0.0012374 Jy ! Component: 1800 - total flux cleaned = 0.0012509 Jy ! Component: 1850 - total flux cleaned = 0.00119758 Jy ! Component: 1900 - total flux cleaned = 0.00119777 Jy ! Component: 1950 - total flux cleaned = 0.00122405 Jy ! Component: 2000 - total flux cleaned = 0.00114633 Jy ! Component: 2050 - total flux cleaned = 0.00114616 Jy ! Component: 2100 - total flux cleaned = 0.00117174 Jy ! Component: 2150 - total flux cleaned = 0.00119683 Jy ! Component: 2200 - total flux cleaned = 0.00113444 Jy ! Component: 2250 - total flux cleaned = 0.0012088 Jy ! Component: 2300 - total flux cleaned = 0.0012211 Jy ! Component: 2350 - total flux cleaned = 0.0012698 Jy ! Component: 2400 - total flux cleaned = 0.00126986 Jy ! Component: 2450 - total flux cleaned = 0.00130572 Jy ! Component: 2500 - total flux cleaned = 0.00132946 Jy ! Component: 2550 - total flux cleaned = 0.00136486 Jy ! Component: 2600 - total flux cleaned = 0.00137651 Jy ! Component: 2650 - total flux cleaned = 0.00141131 Jy ! Component: 2700 - total flux cleaned = 0.00139971 Jy ! Component: 2750 - total flux cleaned = 0.00143426 Jy ! Component: 2800 - total flux cleaned = 0.00145704 Jy ! Component: 2850 - total flux cleaned = 0.00147952 Jy ! Component: 2900 - total flux cleaned = 0.00154664 Jy ! Component: 2950 - total flux cleaned = 0.00153555 Jy ! Component: 3000 - total flux cleaned = 0.00157963 Jy ! Component: 3050 - total flux cleaned = 0.00156863 Jy ! Component: 3100 - total flux cleaned = 0.00159041 Jy ! Component: 3150 - total flux cleaned = 0.00157959 Jy ! Component: 3200 - total flux cleaned = 0.00160116 Jy ! Component: 3250 - total flux cleaned = 0.00163312 Jy ! Component: 3300 - total flux cleaned = 0.00167554 Jy ! Component: 3350 - total flux cleaned = 0.00169668 Jy ! Component: 3400 - total flux cleaned = 0.00169678 Jy ! Component: 3450 - total flux cleaned = 0.00176981 Jy ! Component: 3500 - total flux cleaned = 0.00176988 Jy ! Component: 3550 - total flux cleaned = 0.00180076 Jy ! Component: 3600 - total flux cleaned = 0.00183144 Jy ! Component: 3650 - total flux cleaned = 0.00186196 Jy ! Component: 3700 - total flux cleaned = 0.00187201 Jy ! Component: 3750 - total flux cleaned = 0.00186191 Jy ! Component: 3800 - total flux cleaned = 0.00188189 Jy ! Component: 3850 - total flux cleaned = 0.00186207 Jy ! Component: 3900 - total flux cleaned = 0.0019014 Jy ! Component: 3950 - total flux cleaned = 0.00189168 Jy ! Component: 4000 - total flux cleaned = 0.00191118 Jy ! Component: 4050 - total flux cleaned = 0.00190146 Jy ! Total flux subtracted in 4096 components = 0.0019015 Jy ! Clean residual min=-0.000563 max=0.000620 Jy/beam ! Clean residual mean=0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.187379 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 468 components and 0.187379 Jy ![Exited script file: muppet] wmap "J0400+0550_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 7.892 at -6.155 degrees (North through East) ! Clean map min=-0.0014695 max=0.12189 Jy/beam ! Writing clean map to FITS file: J0400+0550_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121894 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180929 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.445293 0.445293 0.890586 1.78117 3.56234 7.12469 14.2494 28.4987 56.9975 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 7.892 at -6.155 degrees (North through East) ! Clean map min=-0.0014695 max=0.12189 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0400+0550_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:56:45 2019