! Started logfile: J0359+6005_S_2017_06_15_pus_uvs.log on Tue May 7 15:10:36 2019 obs J0359+6005_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0359+6005_S_2017_06_15_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.864087 visibilities/baseline/integration-bin. ! Found source: J0359+6005 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 17420 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0359+6005_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 613 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.630873Jy sigma=0.005730 ! Fit after self-cal, rms=0.595268Jy sigma=0.005403 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=4.074 mas, bpa=-5.154 degrees ! Estimated noise=1013.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.367862 Jy ! Component: 100 - total flux cleaned = 0.462125 Jy ! Total flux subtracted in 100 components = 0.462125 Jy ! Clean residual min=-0.046525 max=0.187873 Jy/beam ! Clean residual mean=-0.000244 rms=0.013996 Jy/beam ! Combined flux in latest and established models = 0.462125 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.462125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321747Jy sigma=0.003009 ! Fit after self-cal, rms=0.321740Jy sigma=0.003007 ! Inverting map ! Added new window around map position (-1.5, -13). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168723 Jy ! Component: 100 - total flux cleaned = 0.251646 Jy ! Total flux subtracted in 100 components = 0.251646 Jy ! Clean residual min=-0.030586 max=0.058602 Jy/beam ! Clean residual mean=-0.000125 rms=0.008419 Jy/beam ! Combined flux in latest and established models = 0.713771 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.713771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210401Jy sigma=0.001920 ! Fit after self-cal, rms=0.182261Jy sigma=0.001684 ! Inverting map ! Added new window around map position (0.5, -17). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0792813 Jy ! Component: 100 - total flux cleaned = 0.126556 Jy ! Total flux subtracted in 100 components = 0.126556 Jy ! Clean residual min=-0.016064 max=0.030508 Jy/beam ! Clean residual mean=-0.000063 rms=0.004673 Jy/beam ! Combined flux in latest and established models = 0.840327 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.840327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135215Jy sigma=0.001219 ! Fit after self-cal, rms=0.128031Jy sigma=0.001157 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042189 Jy ! Component: 100 - total flux cleaned = 0.0710359 Jy ! Total flux subtracted in 100 components = 0.0710359 Jy ! Clean residual min=-0.011686 max=0.026414 Jy/beam ! Clean residual mean=-0.000027 rms=0.003095 Jy/beam ! Combined flux in latest and established models = 0.911363 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.911363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108152Jy sigma=0.000959 ! Fit after self-cal, rms=0.106266Jy sigma=0.000942 ! Inverting map ! Added new window around map position (-1, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285598 Jy ! Component: 100 - total flux cleaned = 0.0482586 Jy ! Total flux subtracted in 100 components = 0.0482586 Jy ! Clean residual min=-0.009097 max=0.012118 Jy/beam ! Clean residual mean=-0.000005 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 0.959621 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.959621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096096Jy sigma=0.000843 ! Fit after self-cal, rms=0.095470Jy sigma=0.000837 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167829 Jy ! Component: 100 - total flux cleaned = 0.0289665 Jy ! Total flux subtracted in 100 components = 0.0289665 Jy ! Clean residual min=-0.008003 max=0.009626 Jy/beam ! Clean residual mean=0.000010 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.988588 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.988588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091602Jy sigma=0.000802 ! Fit after self-cal, rms=0.091370Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.663 mas, bmaj=4.774 mas, bpa=0.1273 degrees ! Estimated noise=660.152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122366 Jy ! Component: 100 - total flux cleaned = 0.0199407 Jy ! Component: 150 - total flux cleaned = 0.0253443 Jy ! Component: 200 - total flux cleaned = 0.0278362 Jy ! Total flux subtracted in 200 components = 0.0278362 Jy ! Clean residual min=-0.006907 max=0.006103 Jy/beam ! Clean residual mean=0.000020 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 1.01642 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 95 components and 1.01642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089287Jy sigma=0.000784 ! Fit after self-cal, rms=0.089130Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.99 KP 1.01 ! LA 1.01 MK 1.03 NL 0.91 OV 0.99 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.01 KP 0.99 ! LA 0.98 MK 1.03 NL 1.04 OV 1.09 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 1.01 KP 0.98 ! LA 1.00 MK 1.04 NL 0.99 OV 0.94 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.97 KP 1.00* ! LA 1.01 MK 1.01 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.089130Jy sigma=0.000782 ! Fit after self-cal, rms=0.082713Jy sigma=0.000721 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.681 mas, bmaj=4.79 mas, bpa=0.6704 degrees ! Estimated noise=657.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414337 Jy ! Component: 100 - total flux cleaned = 0.00583444 Jy ! Component: 150 - total flux cleaned = 0.00707031 Jy ! Component: 200 - total flux cleaned = 0.00786465 Jy ! Total flux subtracted in 200 components = 0.00786465 Jy ! Clean residual min=-0.003361 max=0.004057 Jy/beam ! Clean residual mean=0.000004 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 1.02429 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 1.02429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081972Jy sigma=0.000715 ! Fit after self-cal, rms=0.081940Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081940Jy sigma=0.000715 ! Fit after self-cal, rms=0.080394Jy sigma=0.000695 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=4.776 mas, bpa=0.1966 degrees ! Estimated noise=658.765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012907 Jy ! Component: 100 - total flux cleaned = 0.00174017 Jy ! Component: 150 - total flux cleaned = 0.00222609 Jy ! Component: 200 - total flux cleaned = 0.00273848 Jy ! Total flux subtracted in 200 components = 0.00273848 Jy ! Clean residual min=-0.002741 max=0.003027 Jy/beam ! Clean residual mean=0.000007 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 1.02703 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 1.02703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080133Jy sigma=0.000693 ! Fit after self-cal, rms=0.080135Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160921 Jy ! Component: 100 - total flux cleaned = 0.00213069 Jy ! Component: 150 - total flux cleaned = 0.00236118 Jy ! Component: 200 - total flux cleaned = 0.0027833 Jy ! Total flux subtracted in 200 components = 0.0027833 Jy ! Clean residual min=-0.002531 max=0.002386 Jy/beam ! Clean residual mean=0.000008 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 1.02981 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 1.02981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079956Jy sigma=0.000691 ! Fit after self-cal, rms=0.079943Jy sigma=0.000691 ! Inverting map ! Added new window around map position (8.5, -107.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119221 Jy ! Component: 100 - total flux cleaned = 0.00141187 Jy ! Component: 150 - total flux cleaned = 0.00154592 Jy ! Component: 200 - total flux cleaned = 0.0016682 Jy ! Total flux subtracted in 200 components = 0.0016682 Jy ! Clean residual min=-0.002282 max=0.002270 Jy/beam ! Clean residual mean=0.000009 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 1.03148 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 164 components and 1.03148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079820Jy sigma=0.000690 ! Fit after self-cal, rms=0.079815Jy sigma=0.000690 ! Inverting map ! Added new window around map position (26, 115). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147328 Jy ! Component: 100 - total flux cleaned = 0.00177293 Jy ! Component: 150 - total flux cleaned = 0.00199724 Jy ! Component: 200 - total flux cleaned = 0.00226274 Jy ! Total flux subtracted in 200 components = 0.00226274 Jy ! Clean residual min=-0.002150 max=0.002013 Jy/beam ! Clean residual mean=0.000009 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 1.03374 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 175 components and 1.03374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079717Jy sigma=0.000689 ! Fit after self-cal, rms=0.079713Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079713Jy sigma=0.000689 ! Fit after self-cal, rms=0.079772Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=4.774 mas, bpa=0.2786 degrees ! Estimated noise=658.864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162035 Jy ! Component: 100 - total flux cleaned = 0.00238062 Jy ! Component: 150 - total flux cleaned = 0.00275189 Jy ! Component: 200 - total flux cleaned = 0.00309587 Jy ! Total flux subtracted in 200 components = 0.00309587 Jy ! Clean residual min=-0.002123 max=0.001933 Jy/beam ! Clean residual mean=0.000008 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 1.03684 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 184 components and 1.03684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079693Jy sigma=0.000688 ! Fit after self-cal, rms=0.079689Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252926 Jy ! Component: 100 - total flux cleaned = 0.000391059 Jy ! Component: 150 - total flux cleaned = 0.000609811 Jy ! Component: 200 - total flux cleaned = 0.000775503 Jy ! Total flux subtracted in 200 components = 0.000775503 Jy ! Clean residual min=-0.002074 max=0.001990 Jy/beam ! Clean residual mean=0.000008 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 1.03761 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 194 components and 1.03761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079640Jy sigma=0.000687 ! Fit after self-cal, rms=0.079638Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079638Jy sigma=0.000687 ! Fit after self-cal, rms=0.079677Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.855 mas, bmaj=8.605 mas, bpa=15.03 degrees ! Estimated noise=834.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139114 Jy ! Component: 100 - total flux cleaned = 0.00158116 Jy ! Component: 150 - total flux cleaned = 0.0017006 Jy ! Component: 200 - total flux cleaned = 0.00183212 Jy ! Total flux subtracted in 200 components = 0.00183212 Jy ! Clean residual min=-0.001977 max=0.001926 Jy/beam ! Clean residual mean=0.000016 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 1.03945 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 221 components and 1.03945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079660Jy sigma=0.000687 ! Fit after self-cal, rms=0.079657Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.11171e-05 Jy ! Component: 100 - total flux cleaned = 0.000101415 Jy ! Component: 150 - total flux cleaned = 0.000163474 Jy ! Component: 200 - total flux cleaned = 0.000239893 Jy ! Total flux subtracted in 200 components = 0.000239893 Jy ! Clean residual min=-0.001940 max=0.001978 Jy/beam ! Clean residual mean=0.000015 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 1.03969 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 234 components and 1.03969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079651Jy sigma=0.000687 ! Fit after self-cal, rms=0.079649Jy sigma=0.000687 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=4.773 mas, bpa=0.3502 degrees ! Estimated noise=658.976 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 4.773 at 0.3502 degrees (North through East) ! Clean map min=-0.0019012 max=0.44151 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=4.072 mas, bpa=-4.987 degrees ! Estimated noise=1011.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.383766 Jy ! Component: 100 - total flux cleaned = 0.574972 Jy ! Component: 150 - total flux cleaned = 0.695244 Jy ! Component: 200 - total flux cleaned = 0.773472 Jy ! Total flux subtracted in 200 components = 0.773472 Jy ! Clean residual min=-0.016128 max=0.042121 Jy/beam ! Clean residual mean=-0.000121 rms=0.004749 Jy/beam ! Combined flux in latest and established models = 0.773472 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.773472 Jy ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=4.773 mas, bpa=0.3502 degrees ! Estimated noise=658.976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743126 Jy ! Component: 100 - total flux cleaned = 0.124234 Jy ! Component: 150 - total flux cleaned = 0.15918 Jy ! Component: 200 - total flux cleaned = 0.183905 Jy ! Total flux subtracted in 200 components = 0.183905 Jy ! Clean residual min=-0.005731 max=0.013748 Jy/beam ! Clean residual mean=-0.000056 rms=0.001867 Jy/beam ! Combined flux in latest and established models = 0.957377 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 69 components and 0.957377 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176642 Jy ! Component: 100 - total flux cleaned = 0.0305455 Jy ! Component: 150 - total flux cleaned = 0.0402002 Jy ! Component: 200 - total flux cleaned = 0.0476672 Jy ! Total flux subtracted in 200 components = 0.0476672 Jy ! Clean residual min=-0.003051 max=0.004429 Jy/beam ! Clean residual mean=-0.000015 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 1.00504 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 116 components and 1.00504 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598024 Jy ! Component: 100 - total flux cleaned = 0.010839 Jy ! Component: 150 - total flux cleaned = 0.0148777 Jy ! Component: 200 - total flux cleaned = 0.0182916 Jy ! Total flux subtracted in 200 components = 0.0182916 Jy ! Clean residual min=-0.002435 max=0.002202 Jy/beam ! Clean residual mean=-0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 1.02334 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 142 components and 1.02334 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.855 mas, bmaj=8.605 mas, bpa=15.03 degrees ! Estimated noise=834.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417776 Jy ! Component: 100 - total flux cleaned = 0.0070434 Jy ! Component: 150 - total flux cleaned = 0.00926268 Jy ! Component: 200 - total flux cleaned = 0.0109062 Jy ! Total flux subtracted in 200 components = 0.0109062 Jy ! Clean residual min=-0.002141 max=0.001959 Jy/beam ! Clean residual mean=0.000014 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 1.03424 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000951196 Jy ! Component: 100 - total flux cleaned = 0.00152137 Jy ! Component: 150 - total flux cleaned = 0.00203184 Jy ! Component: 200 - total flux cleaned = 0.00257316 Jy ! Total flux subtracted in 200 components = 0.00257316 Jy ! Clean residual min=-0.001979 max=0.001822 Jy/beam ! Clean residual mean=0.000017 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 1.03682 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 210 components and 1.03682 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=4.773 mas, bpa=0.3502 degrees ! Estimated noise=658.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183094 Jy ! Component: 100 - total flux cleaned = -0.000113943 Jy ! Component: 150 - total flux cleaned = 0.000123599 Jy ! Component: 200 - total flux cleaned = 0.000342093 Jy ! Total flux subtracted in 200 components = 0.000342093 Jy ! Clean residual min=-0.001991 max=0.001876 Jy/beam ! Clean residual mean=0.000006 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 1.03716 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 230 components and 1.03716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079683Jy sigma=0.000688 ! Fit after self-cal, rms=0.079637Jy sigma=0.000687 wmodel J0359+6005_S_2017_06_15_pus_map.mod ! Writing 230 model components to file: J0359+6005_S_2017_06_15_pus_map.mod wobs J0359+6005_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0359+6005_S_2017_06_15_pus_uvs.fits wwins J0359+6005_S_2017_06_15_pus_map.win ! wwins: Wrote 8 windows to J0359+6005_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000794879 Jy ! Component: 100 - total flux cleaned = -0.00126522 Jy ! Component: 150 - total flux cleaned = -0.00165022 Jy ! Component: 200 - total flux cleaned = -0.00195826 Jy ! Component: 250 - total flux cleaned = -0.00222632 Jy ! Component: 300 - total flux cleaned = -0.00242867 Jy ! Component: 350 - total flux cleaned = -0.00248483 Jy ! Component: 400 - total flux cleaned = -0.00256796 Jy ! Component: 450 - total flux cleaned = -0.00259534 Jy ! Component: 500 - total flux cleaned = -0.00267475 Jy ! Component: 550 - total flux cleaned = -0.00270063 Jy ! Component: 600 - total flux cleaned = -0.00267471 Jy ! Component: 650 - total flux cleaned = -0.00272472 Jy ! Component: 700 - total flux cleaned = -0.00272461 Jy ! Component: 750 - total flux cleaned = -0.00270029 Jy ! Component: 800 - total flux cleaned = -0.00270048 Jy ! Component: 850 - total flux cleaned = -0.0027723 Jy ! Component: 900 - total flux cleaned = -0.00270167 Jy ! Component: 950 - total flux cleaned = -0.00267834 Jy ! Component: 1000 - total flux cleaned = -0.00274697 Jy ! Component: 1050 - total flux cleaned = -0.00265583 Jy ! Component: 1100 - total flux cleaned = -0.00270095 Jy ! Component: 1150 - total flux cleaned = -0.00267867 Jy ! Component: 1200 - total flux cleaned = -0.00261282 Jy ! Component: 1250 - total flux cleaned = -0.00259124 Jy ! Component: 1300 - total flux cleaned = -0.00261282 Jy ! Component: 1350 - total flux cleaned = -0.00261268 Jy ! Component: 1400 - total flux cleaned = -0.00257028 Jy ! Component: 1450 - total flux cleaned = -0.00252867 Jy ! Component: 1500 - total flux cleaned = -0.00252853 Jy ! Component: 1550 - total flux cleaned = -0.00250796 Jy ! Component: 1600 - total flux cleaned = -0.00254874 Jy ! Component: 1650 - total flux cleaned = -0.00260897 Jy ! Component: 1700 - total flux cleaned = -0.00250919 Jy ! Component: 1750 - total flux cleaned = -0.00248959 Jy ! Component: 1800 - total flux cleaned = -0.00246994 Jy ! Component: 1850 - total flux cleaned = -0.00248931 Jy ! Component: 1900 - total flux cleaned = -0.00248909 Jy ! Component: 1950 - total flux cleaned = -0.00243163 Jy ! Component: 2000 - total flux cleaned = -0.00243166 Jy ! Component: 2050 - total flux cleaned = -0.00241308 Jy ! Component: 2100 - total flux cleaned = -0.00243159 Jy ! Component: 2150 - total flux cleaned = -0.00248694 Jy ! Component: 2200 - total flux cleaned = -0.00245021 Jy ! Component: 2250 - total flux cleaned = -0.0025228 Jy ! Component: 2300 - total flux cleaned = -0.00252285 Jy ! Component: 2350 - total flux cleaned = -0.0025766 Jy ! Component: 2400 - total flux cleaned = -0.00250552 Jy ! Component: 2450 - total flux cleaned = -0.00261148 Jy ! Component: 2500 - total flux cleaned = -0.00257647 Jy ! Component: 2550 - total flux cleaned = -0.00259381 Jy ! Component: 2600 - total flux cleaned = -0.00264561 Jy ! Component: 2650 - total flux cleaned = -0.00268002 Jy ! Component: 2700 - total flux cleaned = -0.00262861 Jy ! Component: 2750 - total flux cleaned = -0.00264567 Jy ! Component: 2800 - total flux cleaned = -0.00266235 Jy ! Component: 2850 - total flux cleaned = -0.00272935 Jy ! Component: 2900 - total flux cleaned = -0.00281202 Jy ! Component: 2950 - total flux cleaned = -0.00272941 Jy ! Component: 3000 - total flux cleaned = -0.00277841 Jy ! Component: 3050 - total flux cleaned = -0.00276204 Jy ! Component: 3100 - total flux cleaned = -0.00274582 Jy ! Component: 3150 - total flux cleaned = -0.00279382 Jy ! Component: 3200 - total flux cleaned = -0.00284162 Jy ! Component: 3250 - total flux cleaned = -0.00277826 Jy ! Component: 3300 - total flux cleaned = -0.00280987 Jy ! Component: 3350 - total flux cleaned = -0.00280995 Jy ! Component: 3400 - total flux cleaned = -0.00287218 Jy ! Component: 3450 - total flux cleaned = -0.00291866 Jy ! Component: 3500 - total flux cleaned = -0.00291866 Jy ! Component: 3550 - total flux cleaned = -0.00293409 Jy ! Component: 3600 - total flux cleaned = -0.00299481 Jy ! Component: 3650 - total flux cleaned = -0.00294957 Jy ! Component: 3700 - total flux cleaned = -0.00297954 Jy ! Component: 3750 - total flux cleaned = -0.00300935 Jy ! Component: 3800 - total flux cleaned = -0.0030243 Jy ! Component: 3850 - total flux cleaned = -0.00293599 Jy ! Component: 3900 - total flux cleaned = -0.0029358 Jy ! Component: 3950 - total flux cleaned = -0.00296506 Jy ! Component: 4000 - total flux cleaned = -0.00296501 Jy ! Component: 4050 - total flux cleaned = -0.00295043 Jy ! Total flux subtracted in 4096 components = -0.00295038 Jy ! Clean residual min=-0.000982 max=0.000759 Jy/beam ! Clean residual mean=0.000002 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 1.03421 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 529 components and 1.03421 Jy ![Exited script file: muppet] wmap "J0359+6005_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 4.773 at 0.3502 degrees (North through East) ! Clean map min=-0.0013857 max=0.44179 Jy/beam ! Writing clean map to FITS file: J0359+6005_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.441787 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000256833 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.174405 0.174405 0.34881 0.697619 1.39524 2.79048 5.58095 11.1619 22.3238 44.6476 89.2953 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.441 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 4.773 at 0.3502 degrees (North through East) ! Clean map min=-0.0013857 max=0.44179 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0359+6005_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:10:42 2019