! Started logfile: J0359+2758_S_2017_02_19_pus_uvs.log on Sat May 4 18:41:31 2019 obs J0359+2758_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0359+2758_S_2017_02_19_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.76455 visibilities/baseline/integration-bin. ! Found source: J0359+2758 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 11560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0359+2758_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921885Jy sigma=0.008428 ! Fit after self-cal, rms=0.915855Jy sigma=0.008376 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=5.701 mas, bpa=-7.518 degrees ! Estimated noise=1092.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652173 Jy ! Component: 100 - total flux cleaned = 0.0795511 Jy ! Total flux subtracted in 100 components = 0.0795511 Jy ! Clean residual min=-0.003942 max=0.004545 Jy/beam ! Clean residual mean=-0.000010 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.0795511 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0795511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079099Jy sigma=0.000666 ! Fit after self-cal, rms=0.079091Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=6.219 mas, bpa=-4.605 degrees ! Estimated noise=793.811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632186 Jy ! Component: 100 - total flux cleaned = 0.00958376 Jy ! Component: 150 - total flux cleaned = 0.0115328 Jy ! Component: 200 - total flux cleaned = 0.0127397 Jy ! Total flux subtracted in 200 components = 0.0127397 Jy ! Clean residual min=-0.002643 max=0.003604 Jy/beam ! Clean residual mean=-0.000007 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0922908 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 0.0922908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078419Jy sigma=0.000663 ! Fit after self-cal, rms=0.078396Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.00 KP 1.06 ! LA 1.00 MK 1.02 NL 0.90 OV 1.02 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.02 KP 1.00 ! LA 1.02 MK 1.02 NL 1.11 OV 1.03 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.96 KP 0.85 ! LA 0.77 MK 0.98 NL 1.35 OV 0.99 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.08 HN 0.88 KP 1.00* ! LA 0.84 MK 1.22 NL 1.00* OV 0.99 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.078396Jy sigma=0.000663 ! Fit after self-cal, rms=0.075888Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=6.245 mas, bpa=-4.202 degrees ! Estimated noise=793.482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751142 Jy ! Component: 100 - total flux cleaned = 0.000804798 Jy ! Component: 150 - total flux cleaned = 0.000789391 Jy ! Component: 200 - total flux cleaned = 0.000788792 Jy ! Total flux subtracted in 200 components = 0.000788792 Jy ! Clean residual min=-0.002549 max=0.002169 Jy/beam ! Clean residual mean=-0.000001 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0930796 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.0930796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075875Jy sigma=0.000655 ! Fit after self-cal, rms=0.075863Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075863Jy sigma=0.000655 ! Fit after self-cal, rms=0.075511Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=6.264 mas, bpa=-4.346 degrees ! Estimated noise=793.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159136 Jy ! Component: 100 - total flux cleaned = 0.000238561 Jy ! Component: 150 - total flux cleaned = 0.000277634 Jy ! Component: 200 - total flux cleaned = 0.000301093 Jy ! Total flux subtracted in 200 components = 0.000301093 Jy ! Clean residual min=-0.002229 max=0.002064 Jy/beam ! Clean residual mean=-0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0933807 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.0933807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075506Jy sigma=0.000653 ! Fit after self-cal, rms=0.075522Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51343e-05 Jy ! Component: 100 - total flux cleaned = 1.57387e-05 Jy ! Component: 150 - total flux cleaned = 2.63206e-05 Jy ! Component: 200 - total flux cleaned = 3.58852e-05 Jy ! Total flux subtracted in 200 components = 3.58852e-05 Jy ! Clean residual min=-0.002215 max=0.002044 Jy/beam ! Clean residual mean=-0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0934166 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0934166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075519Jy sigma=0.000653 ! Fit after self-cal, rms=0.075519Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075519Jy sigma=0.000653 ! Fit after self-cal, rms=0.075533Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=6.265 mas, bpa=-4.356 degrees ! Estimated noise=793.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135135 Jy ! Component: 100 - total flux cleaned = 0.000169923 Jy ! Component: 150 - total flux cleaned = 0.000180031 Jy ! Component: 200 - total flux cleaned = 0.00018979 Jy ! Total flux subtracted in 200 components = 0.00018979 Jy ! Clean residual min=-0.002188 max=0.002032 Jy/beam ! Clean residual mean=-0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0936064 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0936064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075530Jy sigma=0.000652 ! Fit after self-cal, rms=0.075534Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.34983e-07 Jy ! Component: 100 - total flux cleaned = 8.85152e-06 Jy ! Component: 150 - total flux cleaned = 1.71078e-05 Jy ! Component: 200 - total flux cleaned = 3.27335e-05 Jy ! Total flux subtracted in 200 components = 3.27335e-05 Jy ! Clean residual min=-0.002184 max=0.002022 Jy/beam ! Clean residual mean=-0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0936391 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.0936391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075533Jy sigma=0.000652 ! Fit after self-cal, rms=0.075533Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075533Jy sigma=0.000652 ! Fit after self-cal, rms=0.075526Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.673 mas, bmaj=8.928 mas, bpa=-0.784 degrees ! Estimated noise=1048.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433749 Jy ! Component: 100 - total flux cleaned = 0.000599748 Jy ! Component: 150 - total flux cleaned = 0.000647514 Jy ! Component: 200 - total flux cleaned = 0.000674588 Jy ! Total flux subtracted in 200 components = 0.000674588 Jy ! Clean residual min=-0.002675 max=0.002421 Jy/beam ! Clean residual mean=-0.000003 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0943137 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.0943137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075526Jy sigma=0.000652 ! Fit after self-cal, rms=0.075526Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18281e-05 Jy ! Component: 100 - total flux cleaned = 2.95968e-05 Jy ! Component: 150 - total flux cleaned = 4.45728e-05 Jy ! Component: 200 - total flux cleaned = 5.15749e-05 Jy ! Total flux subtracted in 200 components = 5.15749e-05 Jy ! Clean residual min=-0.002678 max=0.002424 Jy/beam ! Clean residual mean=-0.000003 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0943653 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 0.0943653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075527Jy sigma=0.000652 ! Fit after self-cal, rms=0.075527Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=6.265 mas, bpa=-4.343 degrees ! Estimated noise=792.846 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.164 x 6.265 at -4.343 degrees (North through East) ! Clean map min=-0.0020693 max=0.08515 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=5.741 mas, bpa=-7.09 degrees ! Estimated noise=1088.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0648108 Jy ! Component: 100 - total flux cleaned = 0.0791797 Jy ! Component: 150 - total flux cleaned = 0.0844589 Jy ! Component: 200 - total flux cleaned = 0.0876242 Jy ! Total flux subtracted in 200 components = 0.0876242 Jy ! Clean residual min=-0.003215 max=0.002899 Jy/beam ! Clean residual mean=-0.000002 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0876242 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0876242 Jy ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=6.265 mas, bpa=-4.343 degrees ! Estimated noise=792.846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030814 Jy ! Component: 100 - total flux cleaned = 0.00462379 Jy ! Component: 150 - total flux cleaned = 0.00553561 Jy ! Component: 200 - total flux cleaned = 0.00578589 Jy ! Total flux subtracted in 200 components = 0.00578589 Jy ! Clean residual min=-0.002221 max=0.002046 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0934101 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 0.09341 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.673 mas, bmaj=8.928 mas, bpa=-0.784 degrees ! Estimated noise=1048.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000678312 Jy ! Component: 100 - total flux cleaned = 0.000893221 Jy ! Component: 150 - total flux cleaned = 0.000930884 Jy ! Component: 200 - total flux cleaned = 0.000948017 Jy ! Total flux subtracted in 200 components = 0.000948017 Jy ! Clean residual min=-0.002662 max=0.002414 Jy/beam ! Clean residual mean=-0.000003 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0943581 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0367e-05 Jy ! Component: 100 - total flux cleaned = 2.02897e-05 Jy ! Component: 150 - total flux cleaned = 2.97062e-05 Jy ! Component: 200 - total flux cleaned = 3.42495e-05 Jy ! Total flux subtracted in 200 components = 3.42495e-05 Jy ! Clean residual min=-0.002665 max=0.002414 Jy/beam ! Clean residual mean=-0.000003 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0943923 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.0943923 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=6.265 mas, bpa=-4.343 degrees ! Estimated noise=792.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027922 Jy ! Component: 100 - total flux cleaned = -0.000347335 Jy ! Component: 150 - total flux cleaned = -0.000362035 Jy ! Component: 200 - total flux cleaned = -0.000361999 Jy ! Total flux subtracted in 200 components = -0.000361999 Jy ! Clean residual min=-0.002203 max=0.002047 Jy/beam ! Clean residual mean=-0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0940303 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.0940303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075533Jy sigma=0.000652 ! Fit after self-cal, rms=0.075531Jy sigma=0.000652 wmodel J0359+2758_S_2017_02_19_pus_map.mod ! Writing 64 model components to file: J0359+2758_S_2017_02_19_pus_map.mod wobs J0359+2758_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0359+2758_S_2017_02_19_pus_uvs.fits wwins J0359+2758_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0359+2758_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017128 Jy ! Component: 100 - total flux cleaned = -0.00017161 Jy ! Component: 150 - total flux cleaned = -0.000108061 Jy ! Component: 200 - total flux cleaned = -1.65704e-05 Jy ! Component: 250 - total flux cleaned = -0.000133494 Jy ! Component: 300 - total flux cleaned = -0.000161412 Jy ! Component: 350 - total flux cleaned = -0.000356316 Jy ! Component: 400 - total flux cleaned = -0.000355958 Jy ! Component: 450 - total flux cleaned = -0.000489909 Jy ! Component: 500 - total flux cleaned = -0.000542661 Jy ! Component: 550 - total flux cleaned = -0.000696875 Jy ! Component: 600 - total flux cleaned = -0.000671275 Jy ! Component: 650 - total flux cleaned = -0.00074604 Jy ! Component: 700 - total flux cleaned = -0.000843189 Jy ! Component: 750 - total flux cleaned = -0.000794436 Jy ! Component: 800 - total flux cleaned = -0.000817914 Jy ! Component: 850 - total flux cleaned = -0.000817691 Jy ! Component: 900 - total flux cleaned = -0.000886376 Jy ! Component: 950 - total flux cleaned = -0.00086387 Jy ! Component: 1000 - total flux cleaned = -0.000930319 Jy ! Component: 1050 - total flux cleaned = -0.000995894 Jy ! Component: 1100 - total flux cleaned = -0.000974537 Jy ! Component: 1150 - total flux cleaned = -0.0011029 Jy ! Component: 1200 - total flux cleaned = -0.00108194 Jy ! Component: 1250 - total flux cleaned = -0.00122821 Jy ! Component: 1300 - total flux cleaned = -0.00120745 Jy ! Component: 1350 - total flux cleaned = -0.00118709 Jy ! Component: 1400 - total flux cleaned = -0.00126773 Jy ! Component: 1450 - total flux cleaned = -0.00122743 Jy ! Component: 1500 - total flux cleaned = -0.00126701 Jy ! Component: 1550 - total flux cleaned = -0.00120854 Jy ! Component: 1600 - total flux cleaned = -0.00132445 Jy ! Component: 1650 - total flux cleaned = -0.00124775 Jy ! Component: 1700 - total flux cleaned = -0.00122908 Jy ! Component: 1750 - total flux cleaned = -0.00128561 Jy ! Component: 1800 - total flux cleaned = -0.00130428 Jy ! Component: 1850 - total flux cleaned = -0.001396 Jy ! Component: 1900 - total flux cleaned = -0.00132304 Jy ! Component: 1950 - total flux cleaned = -0.00137669 Jy ! Component: 2000 - total flux cleaned = -0.00134103 Jy ! Component: 2050 - total flux cleaned = -0.00134094 Jy ! Component: 2100 - total flux cleaned = -0.00135822 Jy ! Component: 2150 - total flux cleaned = -0.00137552 Jy ! Component: 2200 - total flux cleaned = -0.00142721 Jy ! Component: 2250 - total flux cleaned = -0.00137599 Jy ! Component: 2300 - total flux cleaned = -0.00140986 Jy ! Component: 2350 - total flux cleaned = -0.00144352 Jy ! Component: 2400 - total flux cleaned = -0.00139379 Jy ! Component: 2450 - total flux cleaned = -0.00142689 Jy ! Component: 2500 - total flux cleaned = -0.00149195 Jy ! Component: 2550 - total flux cleaned = -0.00147599 Jy ! Component: 2600 - total flux cleaned = -0.00149205 Jy ! Component: 2650 - total flux cleaned = -0.00149196 Jy ! Component: 2700 - total flux cleaned = -0.00153948 Jy ! Component: 2750 - total flux cleaned = -0.0015081 Jy ! Component: 2800 - total flux cleaned = -0.00152364 Jy ! Component: 2850 - total flux cleaned = -0.00150831 Jy ! Component: 2900 - total flux cleaned = -0.00150851 Jy ! Component: 2950 - total flux cleaned = -0.00156939 Jy ! Component: 3000 - total flux cleaned = -0.00152434 Jy ! Component: 3050 - total flux cleaned = -0.00153939 Jy ! Component: 3100 - total flux cleaned = -0.00150973 Jy ! Component: 3150 - total flux cleaned = -0.00153949 Jy ! Component: 3200 - total flux cleaned = -0.00153932 Jy ! Component: 3250 - total flux cleaned = -0.00152466 Jy ! Component: 3300 - total flux cleaned = -0.00158235 Jy ! Component: 3350 - total flux cleaned = -0.00145335 Jy ! Component: 3400 - total flux cleaned = -0.0014534 Jy ! Component: 3450 - total flux cleaned = -0.00145336 Jy ! Component: 3500 - total flux cleaned = -0.00145345 Jy ! Component: 3550 - total flux cleaned = -0.00139774 Jy ! Component: 3600 - total flux cleaned = -0.00141167 Jy ! Component: 3650 - total flux cleaned = -0.00143915 Jy ! Component: 3700 - total flux cleaned = -0.00138462 Jy ! Component: 3750 - total flux cleaned = -0.00135748 Jy ! Component: 3800 - total flux cleaned = -0.00138454 Jy ! Component: 3850 - total flux cleaned = -0.00138453 Jy ! Component: 3900 - total flux cleaned = -0.00138468 Jy ! Component: 3950 - total flux cleaned = -0.00137149 Jy ! Component: 4000 - total flux cleaned = -0.0013582 Jy ! Component: 4050 - total flux cleaned = -0.00130585 Jy ! Total flux subtracted in 4096 components = -0.00131892 Jy ! Clean residual min=-0.000807 max=0.000846 Jy/beam ! Clean residual mean=-0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.0927114 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 357 components and 0.0927114 Jy ![Exited script file: muppet] wmap "J0359+2758_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.164 x 6.265 at -4.343 degrees (North through East) ! Clean map min=-0.0013993 max=0.085145 Jy/beam ! Writing clean map to FITS file: J0359+2758_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0851446 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235343 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.829212 0.829212 1.65842 3.31685 6.63369 13.2674 26.5348 53.0696 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.164 x 6.265 at -4.343 degrees (North through East) ! Clean map min=-0.0013993 max=0.085145 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0359+2758_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:41:35 2019