! Started logfile: J0358+5606_X_2017_07_09_pus_uvs.log on Wed May  8 15:20:52 2019
obs J0358+5606_X_2017_07_09_pus_uva.fits
! Reading UV FITS file: J0358+5606_X_2017_07_09_pus_uva.fits
! AN table 1: 143 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.977467 visibilities/baseline/integration-bin.
! Found source: J0358+5606
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 979 lines of history.
! 
! Reading 75480 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0358+5606_X_2017_07_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.571628Jy  sigma=0.004696
! Fit after  self-cal, rms=0.445103Jy  sigma=0.003718
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8024 mas, bmaj=0.9984 mas, bpa=0.7916 degrees
! Estimated noise=701.415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.426111 Jy
! Component: 100  -  total flux cleaned = 0.525558 Jy
! Total flux subtracted in 100 components = 0.525558 Jy
! Clean residual min=-0.011550 max=0.039441 Jy/beam
! Clean residual mean=-0.000171 rms=0.003635 Jy/beam
! Combined flux in latest and established models = 0.525558 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.525558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117301Jy  sigma=0.000992
! Fit after  self-cal, rms=0.117299Jy  sigma=0.000992
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0435642 Jy
! Component: 100  -  total flux cleaned = 0.0678836 Jy
! Total flux subtracted in 100 components = 0.0678836 Jy
! Clean residual min=-0.006907 max=0.012295 Jy/beam
! Clean residual mean=-0.000077 rms=0.001963 Jy/beam
! Combined flux in latest and established models = 0.593442 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.593442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096498Jy  sigma=0.000792
! Fit after  self-cal, rms=0.096460Jy  sigma=0.000792
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146896 Jy
! Component: 100  -  total flux cleaned = 0.0235688 Jy
! Total flux subtracted in 100 components = 0.0235688 Jy
! Clean residual min=-0.005994 max=0.008834 Jy/beam
! Clean residual mean=-0.000044 rms=0.001648 Jy/beam
! Combined flux in latest and established models = 0.617011 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.617011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093783Jy  sigma=0.000764
! Fit after  self-cal, rms=0.093774Jy  sigma=0.000764
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.289 mas, bpa=8.829 degrees
! Estimated noise=305.678 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110915 Jy
! Component: 100  -  total flux cleaned = 0.0184837 Jy
! Component: 150  -  total flux cleaned = 0.0238614 Jy
! Component: 200  -  total flux cleaned = 0.0278983 Jy
! Total flux subtracted in 200 components = 0.0278983 Jy
! Clean residual min=-0.004907 max=0.005135 Jy/beam
! Clean residual mean=-0.000023 rms=0.001258 Jy/beam
! Combined flux in latest and established models = 0.644909 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 43 components and 0.644909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092205Jy  sigma=0.000750
! Fit after  self-cal, rms=0.092122Jy  sigma=0.000749
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        1.00     
!   LA        0.97     MK        0.98     NL        0.97     OV        1.01     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.97     MK        0.97     NL        0.97     OV        1.00     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        0.98     
!   LA        1.00     MK        0.99     NL        0.97     OV        1.00     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.98     HN        1.00     KP        0.99     
!   LA        1.00     MK        1.09     NL        0.97     OV        1.00     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        0.95     KP        0.98     
!   LA        0.98     MK        1.01     NL        0.97     OV        1.00     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.00     KP        0.98     
!   LA        0.99     MK        0.99     NL        0.96     OV        1.00     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        0.98     
!   LA        1.00     MK        1.00     NL        0.97     OV        1.00     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.00     KP        0.99     
!   LA        0.97     MK        0.98     NL        0.97     OV        1.00     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.99     KP        0.98     
!   LA        0.99     MK        0.98     NL        0.97     OV        1.00     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.05     KP        0.98     
!   LA        1.01     MK        1.00     NL        0.97     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.12     KP        0.98     
!   LA        1.01     MK        0.98     NL        0.97     OV        1.01     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        0.97     
!   LA        0.98     MK        1.02     NL        0.98     OV        1.01     
!   PT        1.02     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.092122Jy  sigma=0.000749
! Fit after  self-cal, rms=0.091476Jy  sigma=0.000725
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=1.297 mas, bpa=7.967 degrees
! Estimated noise=306.101 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000320094 Jy
! Component: 100  -  total flux cleaned = 0.000876033 Jy
! Component: 150  -  total flux cleaned = 0.00132957 Jy
! Component: 200  -  total flux cleaned = 0.00177599 Jy
! Total flux subtracted in 200 components = 0.00177599 Jy
! Clean residual min=-0.003244 max=0.003616 Jy/beam
! Clean residual mean=-0.000004 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.646685 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.646685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091306Jy  sigma=0.000724
! Fit after  self-cal, rms=0.091320Jy  sigma=0.000724
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091320Jy  sigma=0.000724
! Fit after  self-cal, rms=0.091893Jy  sigma=0.000703
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=1.297 mas, bpa=8.285 degrees
! Estimated noise=305.801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000781724 Jy
! Component: 100  -  total flux cleaned = 0.000781086 Jy
! Component: 150  -  total flux cleaned = 0.000727954 Jy
! Component: 200  -  total flux cleaned = 0.000727394 Jy
! Total flux subtracted in 200 components = 0.000727394 Jy
! Clean residual min=-0.001446 max=0.002746 Jy/beam
! Clean residual mean=-0.000010 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.647412 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.647412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091810Jy  sigma=0.000702
! Fit after  self-cal, rms=0.091832Jy  sigma=0.000702
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286211 Jy
! Component: 100  -  total flux cleaned = 0.00361169 Jy
! Component: 150  -  total flux cleaned = 0.00382248 Jy
! Component: 200  -  total flux cleaned = 0.00396013 Jy
! Total flux subtracted in 200 components = 0.00396013 Jy
! Clean residual min=-0.001232 max=0.001234 Jy/beam
! Clean residual mean=-0.000000 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.651372 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 0.651372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091732Jy  sigma=0.000701
! Fit after  self-cal, rms=0.091727Jy  sigma=0.000701
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091727Jy  sigma=0.000701
! Fit after  self-cal, rms=0.091746Jy  sigma=0.000701
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=1.297 mas, bpa=8.358 degrees
! Estimated noise=305.738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000371823 Jy
! Component: 100  -  total flux cleaned = 0.000642424 Jy
! Component: 150  -  total flux cleaned = 0.000799092 Jy
! Component: 200  -  total flux cleaned = 0.00090478 Jy
! Total flux subtracted in 200 components = 0.00090478 Jy
! Clean residual min=-0.001158 max=0.001203 Jy/beam
! Clean residual mean=-0.000004 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.652277 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.652277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091709Jy  sigma=0.000701
! Fit after  self-cal, rms=0.091709Jy  sigma=0.000701
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000292383 Jy
! Component: 100  -  total flux cleaned = 0.000385946 Jy
! Component: 150  -  total flux cleaned = 0.0004449 Jy
! Component: 200  -  total flux cleaned = 0.000527561 Jy
! Total flux subtracted in 200 components = 0.000527561 Jy
! Clean residual min=-0.001108 max=0.001139 Jy/beam
! Clean residual mean=-0.000002 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.652805 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 97 components and 0.652805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091690Jy  sigma=0.000701
! Fit after  self-cal, rms=0.091689Jy  sigma=0.000701
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091689Jy  sigma=0.000701
! Fit after  self-cal, rms=0.091720Jy  sigma=0.000701
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.277 mas, bmaj=2.435 mas, bpa=34.21 degrees
! Estimated noise=385.439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00034087 Jy
! Component: 100  -  total flux cleaned = 0.000495412 Jy
! Component: 150  -  total flux cleaned = 0.000578836 Jy
! Component: 200  -  total flux cleaned = 0.000636868 Jy
! Total flux subtracted in 200 components = 0.000636868 Jy
! Clean residual min=-0.000906 max=0.001107 Jy/beam
! Clean residual mean=-0.000006 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.653442 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 113 components and 0.653442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091719Jy  sigma=0.000701
! Fit after  self-cal, rms=0.091720Jy  sigma=0.000701
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136949 Jy
! Component: 100  -  total flux cleaned = 0.000177101 Jy
! Component: 150  -  total flux cleaned = 0.000220271 Jy
! Component: 200  -  total flux cleaned = 0.000250495 Jy
! Total flux subtracted in 200 components = 0.000250495 Jy
! Clean residual min=-0.000916 max=0.001098 Jy/beam
! Clean residual mean=-0.000004 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.653692 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 123 components and 0.653692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091718Jy  sigma=0.000701
! Fit after  self-cal, rms=0.091719Jy  sigma=0.000701
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=1.298 mas, bpa=8.372 degrees
! Estimated noise=305.729 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.03 x 1.298 at 8.372 degrees (North through East)
! Clean map  min=-0.0010283  max=0.56307 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091719Jy  sigma=0.000701
! Fit after  self-cal, rms=0.724367Jy  sigma=0.000614
! Inverting map and beam 
! Estimated beam: bmin=1.031 mas, bmaj=1.298 mas, bpa=8.43 degrees
! Estimated noise=305.622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00045745 Jy
! Component: 100  -  total flux cleaned = -0.000545611 Jy
! Component: 150  -  total flux cleaned = -0.000573246 Jy
! Component: 200  -  total flux cleaned = -0.000597891 Jy
! Total flux subtracted in 200 components = -0.000597891 Jy
! Clean residual min=-0.001068 max=0.001172 Jy/beam
! Clean residual mean=-0.000004 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.653094 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 129 components and 0.653094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.724358Jy  sigma=0.000614
! Fit after  self-cal, rms=0.724366Jy  sigma=0.000614
! Inverting map 
! Added new window around map position (4.8, 7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000955575 Jy
! Component: 100  -  total flux cleaned = 0.00114028 Jy
! Component: 150  -  total flux cleaned = 0.00128444 Jy
! Component: 200  -  total flux cleaned = 0.00128475 Jy
! Total flux subtracted in 200 components = 0.00128475 Jy
! Clean residual min=-0.000992 max=0.000915 Jy/beam
! Clean residual mean=-0.000002 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.654379 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 142 components and 0.654379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.724363Jy  sigma=0.000613
! Fit after  self-cal, rms=0.724360Jy  sigma=0.000613
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.724360Jy  sigma=0.000613
! Fit after  self-cal, rms=0.719467Jy  sigma=0.000613
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8085 mas, bmaj=1.004 mas, bpa=-0.5619 degrees
! Estimated noise=703.972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.427563 Jy
! Component: 100  -  total flux cleaned = 0.526181 Jy
! Component: 150  -  total flux cleaned = 0.567004 Jy
! Component: 200  -  total flux cleaned = 0.589101 Jy
! Total flux subtracted in 200 components = 0.589101 Jy
! Clean residual min=-0.004516 max=0.010973 Jy/beam
! Clean residual mean=-0.000082 rms=0.001356 Jy/beam
! Combined flux in latest and established models = 0.589101 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.589101 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.031 mas, bmaj=1.298 mas, bpa=8.408 degrees
! Estimated noise=305.612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174915 Jy
! Component: 100  -  total flux cleaned = 0.0285719 Jy
! Component: 150  -  total flux cleaned = 0.0363342 Jy
! Component: 200  -  total flux cleaned = 0.0420798 Jy
! Total flux subtracted in 200 components = 0.0420798 Jy
! Clean residual min=-0.001696 max=0.003371 Jy/beam
! Clean residual mean=-0.000066 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.631181 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 47 components and 0.631181 Jy
! Inverting map 
! Added new window around map position (1, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445433 Jy
! Component: 100  -  total flux cleaned = 0.00797716 Jy
! Component: 150  -  total flux cleaned = 0.0107934 Jy
! Component: 200  -  total flux cleaned = 0.0130531 Jy
! Total flux subtracted in 200 components = 0.0130531 Jy
! Clean residual min=-0.001220 max=0.001822 Jy/beam
! Clean residual mean=-0.000028 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.644234 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 62 components and 0.644234 Jy
! Inverting map 
! Added new window around map position (-0.8, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197308 Jy
! Component: 100  -  total flux cleaned = 0.00355016 Jy
! Component: 150  -  total flux cleaned = 0.00490222 Jy
! Component: 200  -  total flux cleaned = 0.00604114 Jy
! Total flux subtracted in 200 components = 0.00604114 Jy
! Clean residual min=-0.001022 max=0.001118 Jy/beam
! Clean residual mean=-0.000013 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.650275 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 78 components and 0.650274 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.277 mas, bmaj=2.434 mas, bpa=34.28 degrees
! Estimated noise=385.074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124879 Jy
! Component: 100  -  total flux cleaned = 0.00211547 Jy
! Component: 150  -  total flux cleaned = 0.00280307 Jy
! Component: 200  -  total flux cleaned = 0.00325473 Jy
! Total flux subtracted in 200 components = 0.00325473 Jy
! Clean residual min=-0.000904 max=0.000928 Jy/beam
! Clean residual mean=-0.000011 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.653529 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324377 Jy
! Component: 100  -  total flux cleaned = 0.000604146 Jy
! Component: 150  -  total flux cleaned = 0.000846696 Jy
! Component: 200  -  total flux cleaned = 0.00105755 Jy
! Total flux subtracted in 200 components = 0.00105755 Jy
! Clean residual min=-0.000910 max=0.000822 Jy/beam
! Clean residual mean=-0.000005 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.654587 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 114 components and 0.654587 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.031 mas, bmaj=1.298 mas, bpa=8.408 degrees
! Estimated noise=305.612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000541878 Jy
! Component: 100  -  total flux cleaned = -0.000504464 Jy
! Component: 150  -  total flux cleaned = -0.000505322 Jy
! Component: 200  -  total flux cleaned = -0.000438705 Jy
! Total flux subtracted in 200 components = -0.000438705 Jy
! Clean residual min=-0.000974 max=0.000953 Jy/beam
! Clean residual mean=-0.000003 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.654148 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 124 components and 0.654148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.719483Jy  sigma=0.000614
! Fit after  self-cal, rms=0.719472Jy  sigma=0.000614
wmodel J0358+5606_X_2017_07_09_pus_map.mod
! Writing 124 model components to file: J0358+5606_X_2017_07_09_pus_map.mod
wobs J0358+5606_X_2017_07_09_pus_uvs.fits
! Writing UV FITS file: J0358+5606_X_2017_07_09_pus_uvs.fits
wwins J0358+5606_X_2017_07_09_pus_map.win
! wwins: Wrote 6 windows to J0358+5606_X_2017_07_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000221592 Jy
! Component: 100  -  total flux cleaned = -0.000323007 Jy
! Component: 150  -  total flux cleaned = -0.000355448 Jy
! Component: 200  -  total flux cleaned = -0.000371217 Jy
! Component: 250  -  total flux cleaned = -0.00035612 Jy
! Component: 300  -  total flux cleaned = -0.000370607 Jy
! Component: 350  -  total flux cleaned = -0.000399191 Jy
! Component: 400  -  total flux cleaned = -0.000426997 Jy
! Component: 450  -  total flux cleaned = -0.000399318 Jy
! Component: 500  -  total flux cleaned = -0.000399271 Jy
! Component: 550  -  total flux cleaned = -0.00034615 Jy
! Component: 600  -  total flux cleaned = -0.000333394 Jy
! Component: 650  -  total flux cleaned = -0.000320594 Jy
! Component: 700  -  total flux cleaned = -0.000345676 Jy
! Component: 750  -  total flux cleaned = -0.000307943 Jy
! Component: 800  -  total flux cleaned = -0.000320441 Jy
! Component: 850  -  total flux cleaned = -0.000344916 Jy
! Component: 900  -  total flux cleaned = -0.000356949 Jy
! Component: 950  -  total flux cleaned = -0.000368716 Jy
! Component: 1000  -  total flux cleaned = -0.000356804 Jy
! Component: 1050  -  total flux cleaned = -0.000356654 Jy
! Component: 1100  -  total flux cleaned = -0.000333634 Jy
! Component: 1150  -  total flux cleaned = -0.000322107 Jy
! Component: 1200  -  total flux cleaned = -0.000288129 Jy
! Component: 1250  -  total flux cleaned = -0.000254518 Jy
! Component: 1300  -  total flux cleaned = -0.000243562 Jy
! Component: 1350  -  total flux cleaned = -0.000232499 Jy
! Component: 1400  -  total flux cleaned = -0.000199864 Jy
! Component: 1450  -  total flux cleaned = -0.000188917 Jy
! Component: 1500  -  total flux cleaned = -0.000167459 Jy
! Component: 1550  -  total flux cleaned = -9.31529e-05 Jy
! Component: 1600  -  total flux cleaned = -4.05397e-05 Jy
! Component: 1650  -  total flux cleaned = -9.24328e-06 Jy
! Component: 1700  -  total flux cleaned = 1.13581e-05 Jy
! Component: 1750  -  total flux cleaned = 5.23643e-05 Jy
! Component: 1800  -  total flux cleaned = 8.27246e-05 Jy
! Component: 1850  -  total flux cleaned = 0.000112977 Jy
! Component: 1900  -  total flux cleaned = 0.000123059 Jy
! Component: 1950  -  total flux cleaned = 0.000162678 Jy
! Component: 2000  -  total flux cleaned = 0.000182327 Jy
! Total flux subtracted in 2048 components = 0.000162882 Jy
! Clean residual min=-0.000507 max=0.000505 Jy/beam
! Clean residual mean=-0.000001 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.654311 Jy
keep
! Adding 161 model components to the UV plane model.
! The established model now contains 284 components and 0.654311 Jy
![Exited script file: muppet]
wmap "J0358+5606_X_2017_07_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.031 x 1.298 at 8.408 degrees (North through East)
! Clean map  min=-0.00077221  max=0.5634 Jy/beam
! Writing clean map to FITS file: J0358+5606_X_2017_07_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.563397 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000173931 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0926155 0.0926155 0.185231 0.370462 0.740924 1.48185 2.9637 5.92739 11.8548 23.7096 47.4192 94.8383
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.563 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.031 x 1.298 at 8.408 degrees (North through East)
! Clean map  min=-0.00077221  max=0.5634 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0358+5606_X_2017_07_09_pus_uvs.log closed on Wed May  8 15:20:57 2019