! Started logfile: J0358+5606_S_2017_07_09_pus_uvs.log on Wed May 8 14:41:19 2019 obs J0358+5606_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0358+5606_S_2017_07_09_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977467 visibilities/baseline/integration-bin. ! Found source: J0358+5606 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 25160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0358+5606_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 735 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.640630Jy sigma=0.006285 ! Fit after self-cal, rms=0.596557Jy sigma=0.005878 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=4.152 mas, bpa=5.911 degrees ! Estimated noise=883.413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310678 Jy ! Component: 100 - total flux cleaned = 0.384627 Jy ! Total flux subtracted in 100 components = 0.384627 Jy ! Clean residual min=-0.011236 max=0.030315 Jy/beam ! Clean residual mean=-0.000033 rms=0.002935 Jy/beam ! Combined flux in latest and established models = 0.384627 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.384627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103645Jy sigma=0.000989 ! Fit after self-cal, rms=0.103596Jy sigma=0.000988 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343751 Jy ! Component: 100 - total flux cleaned = 0.0538197 Jy ! Total flux subtracted in 100 components = 0.0538197 Jy ! Clean residual min=-0.007816 max=0.010176 Jy/beam ! Clean residual mean=0.000007 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.438447 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.438447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089650Jy sigma=0.000858 ! Fit after self-cal, rms=0.089579Jy sigma=0.000857 ! Inverting map ! Added new window around map position (-3, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119934 Jy ! Component: 100 - total flux cleaned = 0.019297 Jy ! Total flux subtracted in 100 components = 0.019297 Jy ! Clean residual min=-0.006986 max=0.007216 Jy/beam ! Clean residual mean=0.000021 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.457744 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.457744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087736Jy sigma=0.000844 ! Fit after self-cal, rms=0.087699Jy sigma=0.000844 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=4.91 mas, bpa=9.064 degrees ! Estimated noise=514.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433686 Jy ! Component: 100 - total flux cleaned = 0.00522566 Jy ! Component: 150 - total flux cleaned = 0.00547789 Jy ! Component: 200 - total flux cleaned = 0.0056162 Jy ! Total flux subtracted in 200 components = 0.0056162 Jy ! Clean residual min=-0.004495 max=0.006341 Jy/beam ! Clean residual mean=0.000053 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.46336 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.46336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087359Jy sigma=0.000842 ! Fit after self-cal, rms=0.087347Jy sigma=0.000842 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.96 KP 1.01 ! LA 0.99 MK 1.05 NL 0.89 OV 1.02 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.00 KP 0.98 ! LA 0.98 MK 1.04 NL 1.03 OV 1.14 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 0.99 KP 0.97 ! LA 0.99 MK 1.06 NL 0.99 OV 0.97 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.98 KP 1.00* ! LA 1.06 MK 1.08 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.087347Jy sigma=0.000842 ! Fit after self-cal, rms=0.082876Jy sigma=0.000794 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=4.935 mas, bpa=9.738 degrees ! Estimated noise=516.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118632 Jy ! Component: 100 - total flux cleaned = 0.00163277 Jy ! Component: 150 - total flux cleaned = 0.00177328 Jy ! Component: 200 - total flux cleaned = 0.00181676 Jy ! Total flux subtracted in 200 components = 0.00181676 Jy ! Clean residual min=-0.003545 max=0.003739 Jy/beam ! Clean residual mean=0.000041 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.465177 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.465177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082821Jy sigma=0.000793 ! Fit after self-cal, rms=0.082804Jy sigma=0.000793 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082804Jy sigma=0.000793 ! Fit after self-cal, rms=0.079689Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=4.932 mas, bpa=9.236 degrees ! Estimated noise=516.764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626977 Jy ! Component: 100 - total flux cleaned = 0.000577849 Jy ! Component: 150 - total flux cleaned = 0.000538978 Jy ! Component: 200 - total flux cleaned = 0.000520671 Jy ! Total flux subtracted in 200 components = 0.000520671 Jy ! Clean residual min=-0.001789 max=0.002444 Jy/beam ! Clean residual mean=0.000017 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.465698 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.465697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079668Jy sigma=0.000771 ! Fit after self-cal, rms=0.079679Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235486 Jy ! Component: 100 - total flux cleaned = 0.00364107 Jy ! Component: 150 - total flux cleaned = 0.00437427 Jy ! Component: 200 - total flux cleaned = 0.00455528 Jy ! Total flux subtracted in 200 components = 0.00455528 Jy ! Clean residual min=-0.001605 max=0.001955 Jy/beam ! Clean residual mean=0.000019 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.470253 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 96 components and 0.470253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079603Jy sigma=0.000770 ! Fit after self-cal, rms=0.079604Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079604Jy sigma=0.000770 ! Fit after self-cal, rms=0.079547Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=4.934 mas, bpa=9.326 degrees ! Estimated noise=516.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000996058 Jy ! Component: 100 - total flux cleaned = 0.00136003 Jy ! Component: 150 - total flux cleaned = 0.00141188 Jy ! Component: 200 - total flux cleaned = 0.00146055 Jy ! Total flux subtracted in 200 components = 0.00146055 Jy ! Clean residual min=-0.001569 max=0.001941 Jy/beam ! Clean residual mean=0.000016 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.471713 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 105 components and 0.471713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079526Jy sigma=0.000770 ! Fit after self-cal, rms=0.079528Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232859 Jy ! Component: 100 - total flux cleaned = 0.000255266 Jy ! Component: 150 - total flux cleaned = 0.000296492 Jy ! Component: 200 - total flux cleaned = 0.000335109 Jy ! Total flux subtracted in 200 components = 0.000335109 Jy ! Clean residual min=-0.001587 max=0.001898 Jy/beam ! Clean residual mean=0.000016 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.472048 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.472049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079517Jy sigma=0.000770 ! Fit after self-cal, rms=0.079517Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079517Jy sigma=0.000770 ! Fit after self-cal, rms=0.079500Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.086 mas, bmaj=8.813 mas, bpa=26.56 degrees ! Estimated noise=643.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711399 Jy ! Component: 100 - total flux cleaned = 0.00100399 Jy ! Component: 150 - total flux cleaned = 0.00107473 Jy ! Component: 200 - total flux cleaned = 0.00114909 Jy ! Total flux subtracted in 200 components = 0.00114909 Jy ! Clean residual min=-0.001796 max=0.002800 Jy/beam ! Clean residual mean=0.000033 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.473198 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 121 components and 0.473198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079498Jy sigma=0.000770 ! Fit after self-cal, rms=0.079498Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141558 Jy ! Component: 100 - total flux cleaned = 0.000187815 Jy ! Component: 150 - total flux cleaned = 0.000228469 Jy ! Component: 200 - total flux cleaned = 0.000274313 Jy ! Total flux subtracted in 200 components = 0.000274313 Jy ! Clean residual min=-0.001813 max=0.002798 Jy/beam ! Clean residual mean=0.000034 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.473472 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 0.473472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079498Jy sigma=0.000770 ! Fit after self-cal, rms=0.079498Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=4.935 mas, bpa=9.371 degrees ! Estimated noise=516.888 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.872 x 4.935 at 9.371 degrees (North through East) ! Clean map min=-0.0015414 max=0.40611 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=4.193 mas, bpa=6.598 degrees ! Estimated noise=886.321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.311568 Jy ! Component: 100 - total flux cleaned = 0.384963 Jy ! Component: 150 - total flux cleaned = 0.417731 Jy ! Component: 200 - total flux cleaned = 0.436325 Jy ! Total flux subtracted in 200 components = 0.436325 Jy ! Clean residual min=-0.004226 max=0.009346 Jy/beam ! Clean residual mean=-0.000015 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.436325 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.436325 Jy ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=4.935 mas, bpa=9.371 degrees ! Estimated noise=516.888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135563 Jy ! Component: 100 - total flux cleaned = 0.0208314 Jy ! Component: 150 - total flux cleaned = 0.0251643 Jy ! Component: 200 - total flux cleaned = 0.028228 Jy ! Total flux subtracted in 200 components = 0.028228 Jy ! Clean residual min=-0.001930 max=0.002116 Jy/beam ! Clean residual mean=0.000008 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.464553 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.464553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.086 mas, bmaj=8.813 mas, bpa=26.56 degrees ! Estimated noise=643.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278816 Jy ! Component: 100 - total flux cleaned = 0.00460871 Jy ! Component: 150 - total flux cleaned = 0.00590072 Jy ! Component: 200 - total flux cleaned = 0.00685223 Jy ! Total flux subtracted in 200 components = 0.00685223 Jy ! Clean residual min=-0.001830 max=0.002719 Jy/beam ! Clean residual mean=0.000030 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.471405 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000713593 Jy ! Component: 100 - total flux cleaned = 0.0011347 Jy ! Component: 150 - total flux cleaned = 0.00138593 Jy ! Component: 200 - total flux cleaned = 0.00159521 Jy ! Total flux subtracted in 200 components = 0.00159521 Jy ! Clean residual min=-0.001764 max=0.002760 Jy/beam ! Clean residual mean=0.000033 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.473001 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 113 components and 0.473 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=4.935 mas, bpa=9.371 degrees ! Estimated noise=516.888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214492 Jy ! Component: 100 - total flux cleaned = -0.000169378 Jy ! Component: 150 - total flux cleaned = -0.000171431 Jy ! Component: 200 - total flux cleaned = -0.00017054 Jy ! Total flux subtracted in 200 components = -0.00017054 Jy ! Clean residual min=-0.001732 max=0.002075 Jy/beam ! Clean residual mean=0.000014 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.47283 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 124 components and 0.47283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079583Jy sigma=0.000770 ! Fit after self-cal, rms=0.079567Jy sigma=0.000770 wmodel J0358+5606_S_2017_07_09_pus_map.mod ! Writing 124 model components to file: J0358+5606_S_2017_07_09_pus_map.mod wobs J0358+5606_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0358+5606_S_2017_07_09_pus_uvs.fits wwins J0358+5606_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J0358+5606_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000904275 Jy ! Component: 100 - total flux cleaned = 0.00152619 Jy ! Component: 150 - total flux cleaned = 0.00211321 Jy ! Component: 200 - total flux cleaned = 0.00252665 Jy ! Component: 250 - total flux cleaned = 0.00286799 Jy ! Component: 300 - total flux cleaned = 0.00325466 Jy ! Component: 350 - total flux cleaned = 0.0036042 Jy ! Component: 400 - total flux cleaned = 0.0039703 Jy ! Component: 450 - total flux cleaned = 0.00417489 Jy ! Component: 500 - total flux cleaned = 0.00445053 Jy ! Component: 550 - total flux cleaned = 0.00459788 Jy ! Component: 600 - total flux cleaned = 0.00474257 Jy ! Component: 650 - total flux cleaned = 0.00495532 Jy ! Component: 700 - total flux cleaned = 0.00507169 Jy ! Component: 750 - total flux cleaned = 0.00530041 Jy ! Component: 800 - total flux cleaned = 0.00541329 Jy ! Component: 850 - total flux cleaned = 0.00561234 Jy ! Component: 900 - total flux cleaned = 0.00572131 Jy ! Component: 950 - total flux cleaned = 0.00587157 Jy ! Component: 1000 - total flux cleaned = 0.00597783 Jy ! Component: 1050 - total flux cleaned = 0.00612428 Jy ! Component: 1100 - total flux cleaned = 0.0062891 Jy ! Component: 1150 - total flux cleaned = 0.00643118 Jy ! Component: 1200 - total flux cleaned = 0.00643132 Jy ! Component: 1250 - total flux cleaned = 0.00657023 Jy ! Component: 1300 - total flux cleaned = 0.00666821 Jy ! Component: 1350 - total flux cleaned = 0.00680351 Jy ! Component: 1400 - total flux cleaned = 0.00691772 Jy ! Component: 1450 - total flux cleaned = 0.00699288 Jy ! Component: 1500 - total flux cleaned = 0.00719752 Jy ! Component: 1550 - total flux cleaned = 0.0072341 Jy ! Component: 1600 - total flux cleaned = 0.00730689 Jy ! Component: 1650 - total flux cleaned = 0.00739651 Jy ! Component: 1700 - total flux cleaned = 0.00752056 Jy ! Component: 1750 - total flux cleaned = 0.00762605 Jy ! Component: 1800 - total flux cleaned = 0.00773021 Jy ! Component: 1850 - total flux cleaned = 0.00779894 Jy ! Component: 1900 - total flux cleaned = 0.00786705 Jy ! Component: 1950 - total flux cleaned = 0.00796798 Jy ! Component: 2000 - total flux cleaned = 0.00801756 Jy ! Component: 2050 - total flux cleaned = 0.00818193 Jy ! Component: 2100 - total flux cleaned = 0.00819797 Jy ! Component: 2150 - total flux cleaned = 0.00827858 Jy ! Component: 2200 - total flux cleaned = 0.00837429 Jy ! Component: 2250 - total flux cleaned = 0.00848463 Jy ! Component: 2300 - total flux cleaned = 0.00859406 Jy ! Component: 2350 - total flux cleaned = 0.00868682 Jy ! Component: 2400 - total flux cleaned = 0.00874807 Jy ! Component: 2450 - total flux cleaned = 0.00885419 Jy ! Component: 2500 - total flux cleaned = 0.00889927 Jy ! Component: 2550 - total flux cleaned = 0.00895898 Jy ! Component: 2600 - total flux cleaned = 0.00906211 Jy ! Component: 2650 - total flux cleaned = 0.009106 Jy ! Component: 2700 - total flux cleaned = 0.00916377 Jy ! Component: 2750 - total flux cleaned = 0.00924992 Jy ! Component: 2800 - total flux cleaned = 0.00932113 Jy ! Component: 2850 - total flux cleaned = 0.00939175 Jy ! Component: 2900 - total flux cleaned = 0.00943357 Jy ! Component: 2950 - total flux cleaned = 0.00950292 Jy ! Component: 3000 - total flux cleaned = 0.00951679 Jy ! Component: 3050 - total flux cleaned = 0.0095712 Jy ! Component: 3100 - total flux cleaned = 0.00965228 Jy ! Component: 3150 - total flux cleaned = 0.00967893 Jy ! Component: 3200 - total flux cleaned = 0.00975889 Jy ! Component: 3250 - total flux cleaned = 0.0097985 Jy ! Component: 3300 - total flux cleaned = 0.0099032 Jy ! Component: 3350 - total flux cleaned = 0.00998114 Jy ! Component: 3400 - total flux cleaned = 0.00999414 Jy ! Component: 3450 - total flux cleaned = 0.010084 Jy ! Component: 3500 - total flux cleaned = 0.0101475 Jy ! Component: 3550 - total flux cleaned = 0.0102107 Jy ! Component: 3600 - total flux cleaned = 0.0102859 Jy ! Component: 3650 - total flux cleaned = 0.0103234 Jy ! Component: 3700 - total flux cleaned = 0.01041 Jy ! Component: 3750 - total flux cleaned = 0.0104591 Jy ! Component: 3800 - total flux cleaned = 0.0105323 Jy ! Component: 3850 - total flux cleaned = 0.0105566 Jy ! Component: 3900 - total flux cleaned = 0.0106409 Jy ! Component: 3950 - total flux cleaned = 0.0107245 Jy ! Component: 4000 - total flux cleaned = 0.0107601 Jy ! Component: 4050 - total flux cleaned = 0.0108191 Jy ! Total flux subtracted in 4096 components = 0.0108778 Jy ! Clean residual min=-0.000626 max=0.000668 Jy/beam ! Clean residual mean=0.000004 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.483708 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 439 components and 0.483708 Jy ![Exited script file: muppet] wmap "J0358+5606_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.872 x 4.935 at 9.371 degrees (North through East) ! Clean map min=-0.0012903 max=0.40634 Jy/beam ! Writing clean map to FITS file: J0358+5606_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.406339 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214391 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.158285 0.158285 0.31657 0.63314 1.26628 2.53256 5.06512 10.1302 20.2605 40.521 81.0419 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.406 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.872 x 4.935 at 9.371 degrees (North through East) ! Clean map min=-0.0012903 max=0.40634 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0358+5606_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:41:25 2019