! Started logfile: J0357-4812_S_2017_02_19_pus_uvs.log on Sat May 4 18:41:26 2019 obs J0357-4812_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0357-4812_S_2017_02_19_pus_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.291111 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0357-4812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 3144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0357-4812_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 285 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 283 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 284 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 432 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.705612Jy sigma=0.003369 ! Fit after self-cal, rms=0.661276Jy sigma=0.003173 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=8.092 mas, bpa=-10.32 degrees ! Estimated noise=5589.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.246074 Jy ! Component: 100 - total flux cleaned = 0.335866 Jy ! Total flux subtracted in 100 components = 0.335866 Jy ! Clean residual min=-0.025380 max=0.039666 Jy/beam ! Clean residual mean=-0.000196 rms=0.008118 Jy/beam ! Combined flux in latest and established models = 0.335866 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.335866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185517Jy sigma=0.000815 ! Fit after self-cal, rms=0.185482Jy sigma=0.000814 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=9.346 mas, bpa=-1.61 degrees ! Estimated noise=3099.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557549 Jy ! Component: 100 - total flux cleaned = 0.0745516 Jy ! Component: 150 - total flux cleaned = 0.0816855 Jy ! Component: 200 - total flux cleaned = 0.082183 Jy ! Total flux subtracted in 200 components = 0.082183 Jy ! Clean residual min=-0.023664 max=0.034538 Jy/beam ! Clean residual mean=-0.000680 rms=0.008037 Jy/beam ! Combined flux in latest and established models = 0.418049 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 37 components and 0.418049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168572Jy sigma=0.000746 ! Fit after self-cal, rms=0.168603Jy sigma=0.000746 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.03 ! LA 1.04 MK 0.84 NL 1.00* OV 1.30 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.00 ! LA 0.98 MK 1.02 NL 1.00* OV 1.23 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.87 ! LA 0.73 MK 0.91 NL 1.00* OV 1.10 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.00* ! LA 0.72 MK 0.86 NL 1.00* OV 1.07 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.168603Jy sigma=0.000746 ! Fit after self-cal, rms=0.149409Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=8.927 mas, bpa=-2.097 degrees ! Estimated noise=3152.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047921 Jy ! Component: 100 - total flux cleaned = -0.000467937 Jy ! Component: 150 - total flux cleaned = -0.000362797 Jy ! Component: 200 - total flux cleaned = -0.00035895 Jy ! Total flux subtracted in 200 components = -0.00035895 Jy ! Clean residual min=-0.007822 max=0.010356 Jy/beam ! Clean residual mean=0.000014 rms=0.002300 Jy/beam ! Combined flux in latest and established models = 0.41769 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.41769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149266Jy sigma=0.000679 ! Fit after self-cal, rms=0.149471Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149471Jy sigma=0.000678 ! Fit after self-cal, rms=0.151419Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=8.972 mas, bpa=-1.829 degrees ! Estimated noise=3170.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245697 Jy ! Component: 100 - total flux cleaned = 0.00274645 Jy ! Component: 150 - total flux cleaned = 0.00294599 Jy ! Component: 200 - total flux cleaned = 0.00303436 Jy ! Total flux subtracted in 200 components = 0.00303436 Jy ! Clean residual min=-0.007543 max=0.009204 Jy/beam ! Clean residual mean=0.000061 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.420724 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.420724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151362Jy sigma=0.000674 ! Fit after self-cal, rms=0.151403Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (81.5, 24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794028 Jy ! Component: 100 - total flux cleaned = 0.00863909 Jy ! Component: 150 - total flux cleaned = 0.0085057 Jy ! Component: 200 - total flux cleaned = 0.0083977 Jy ! Total flux subtracted in 200 components = 0.0083977 Jy ! Clean residual min=-0.007352 max=0.005449 Jy/beam ! Clean residual mean=-0.000003 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.429122 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.429122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150872Jy sigma=0.000672 ! Fit after self-cal, rms=0.150811Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150811Jy sigma=0.000672 ! Fit after self-cal, rms=0.150675Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.862 mas, bmaj=8.987 mas, bpa=-1.808 degrees ! Estimated noise=3161.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643851 Jy ! Component: 100 - total flux cleaned = 0.000450736 Jy ! Component: 150 - total flux cleaned = 0.000292618 Jy ! Component: 200 - total flux cleaned = 0.000228512 Jy ! Total flux subtracted in 200 components = 0.000228512 Jy ! Clean residual min=-0.006304 max=0.005237 Jy/beam ! Clean residual mean=0.000027 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.42935 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.42935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150553Jy sigma=0.000670 ! Fit after self-cal, rms=0.150540Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187095 Jy ! Component: 100 - total flux cleaned = 0.000306702 Jy ! Component: 150 - total flux cleaned = 0.000406378 Jy ! Component: 200 - total flux cleaned = 0.000407723 Jy ! Total flux subtracted in 200 components = 0.000407723 Jy ! Clean residual min=-0.006088 max=0.005140 Jy/beam ! Clean residual mean=0.000028 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.429758 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 0.429758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150490Jy sigma=0.000670 ! Fit after self-cal, rms=0.150484Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150484Jy sigma=0.000669 ! Fit after self-cal, rms=0.150519Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.214 mas, bmaj=32.74 mas, bpa=-1.038 degrees ! Estimated noise=4357.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139396 Jy ! Component: 100 - total flux cleaned = 0.000179707 Jy ! Component: 150 - total flux cleaned = 0.000312206 Jy ! Component: 200 - total flux cleaned = 0.000309146 Jy ! Total flux subtracted in 200 components = 0.000309146 Jy ! Clean residual min=-0.004741 max=0.004139 Jy/beam ! Clean residual mean=0.000055 rms=0.001562 Jy/beam ! Combined flux in latest and established models = 0.430067 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 83 components and 0.430067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150522Jy sigma=0.000669 ! Fit after self-cal, rms=0.150507Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.4907e-06 Jy ! Component: 100 - total flux cleaned = -1.02511e-05 Jy ! Component: 150 - total flux cleaned = -4.04819e-05 Jy ! Component: 200 - total flux cleaned = -4.27069e-05 Jy ! Total flux subtracted in 200 components = -4.27069e-05 Jy ! Clean residual min=-0.004694 max=0.004161 Jy/beam ! Clean residual mean=0.000055 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.430024 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 84 components and 0.430024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150513Jy sigma=0.000669 ! Fit after self-cal, rms=0.150502Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=8.989 mas, bpa=-1.804 degrees ! Estimated noise=3162.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.861 x 8.989 at -1.804 degrees (North through East) ! Clean map min=-0.0056667 max=0.33736 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.216 mas, bmaj=7.948 mas, bpa=-10.62 degrees ! Estimated noise=5493.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236187 Jy ! Component: 100 - total flux cleaned = 0.325553 Jy ! Component: 150 - total flux cleaned = 0.36671 Jy ! Component: 200 - total flux cleaned = 0.387317 Jy ! Total flux subtracted in 200 components = 0.387317 Jy ! Clean residual min=-0.017410 max=0.012519 Jy/beam ! Clean residual mean=-0.000025 rms=0.003759 Jy/beam ! Combined flux in latest and established models = 0.387317 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.387317 Jy ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=8.989 mas, bpa=-1.804 degrees ! Estimated noise=3162.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210035 Jy ! Component: 100 - total flux cleaned = 0.0305353 Jy ! Component: 150 - total flux cleaned = 0.0345327 Jy ! Component: 200 - total flux cleaned = 0.0353449 Jy ! Total flux subtracted in 200 components = 0.0353449 Jy ! Clean residual min=-0.007476 max=0.006041 Jy/beam ! Clean residual mean=-0.000009 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 0.422662 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 59 components and 0.422662 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.214 mas, bmaj=32.74 mas, bpa=-1.038 degrees ! Estimated noise=4357.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459093 Jy ! Component: 100 - total flux cleaned = 0.00615835 Jy ! Component: 150 - total flux cleaned = 0.00651623 Jy ! Component: 200 - total flux cleaned = 0.00674534 Jy ! Total flux subtracted in 200 components = 0.00674534 Jy ! Clean residual min=-0.004781 max=0.004046 Jy/beam ! Clean residual mean=0.000047 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.429407 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127943 Jy ! Component: 100 - total flux cleaned = 0.000173302 Jy ! Component: 150 - total flux cleaned = 0.000214056 Jy ! Component: 200 - total flux cleaned = 0.000269509 Jy ! Total flux subtracted in 200 components = 0.000269509 Jy ! Clean residual min=-0.004506 max=0.004111 Jy/beam ! Clean residual mean=0.000053 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.429677 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.429677 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=8.989 mas, bpa=-1.804 degrees ! Estimated noise=3162.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232074 Jy ! Component: 100 - total flux cleaned = 0.000102838 Jy ! Component: 150 - total flux cleaned = 0.00010345 Jy ! Component: 200 - total flux cleaned = -8.84308e-05 Jy ! Total flux subtracted in 200 components = -8.84308e-05 Jy ! Clean residual min=-0.005976 max=0.005742 Jy/beam ! Clean residual mean=0.000025 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.429588 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.429588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150641Jy sigma=0.000670 ! Fit after self-cal, rms=0.150625Jy sigma=0.000670 wmodel J0357-4812_S_2017_02_19_pus_map.mod ! Writing 84 model components to file: J0357-4812_S_2017_02_19_pus_map.mod wobs J0357-4812_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0357-4812_S_2017_02_19_pus_uvs.fits wwins J0357-4812_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0357-4812_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578806 Jy ! Component: 100 - total flux cleaned = 0.00212301 Jy ! Component: 150 - total flux cleaned = 0.00319565 Jy ! Component: 200 - total flux cleaned = 0.00403265 Jy ! Component: 250 - total flux cleaned = 0.00473915 Jy ! Component: 300 - total flux cleaned = 0.0051378 Jy ! Component: 350 - total flux cleaned = 0.00532869 Jy ! Component: 400 - total flux cleaned = 0.00526977 Jy ! Component: 450 - total flux cleaned = 0.00515289 Jy ! Component: 500 - total flux cleaned = 0.00492495 Jy ! Component: 550 - total flux cleaned = 0.00475912 Jy ! Component: 600 - total flux cleaned = 0.00470517 Jy ! Component: 650 - total flux cleaned = 0.00454662 Jy ! Component: 700 - total flux cleaned = 0.00439091 Jy ! Component: 750 - total flux cleaned = 0.00418602 Jy ! Component: 800 - total flux cleaned = 0.00408487 Jy ! Component: 850 - total flux cleaned = 0.00383436 Jy ! Component: 900 - total flux cleaned = 0.00358551 Jy ! Component: 950 - total flux cleaned = 0.00338764 Jy ! Component: 1000 - total flux cleaned = 0.00314109 Jy ! Component: 1050 - total flux cleaned = 0.00289566 Jy ! Component: 1100 - total flux cleaned = 0.0027976 Jy ! Component: 1150 - total flux cleaned = 0.00250511 Jy ! Component: 1200 - total flux cleaned = 0.00226237 Jy ! Component: 1250 - total flux cleaned = 0.00197209 Jy ! Component: 1300 - total flux cleaned = 0.00163466 Jy ! Component: 1350 - total flux cleaned = 0.00134569 Jy ! Component: 1400 - total flux cleaned = 0.00120119 Jy ! Component: 1450 - total flux cleaned = 0.000960506 Jy ! Component: 1500 - total flux cleaned = 0.000671057 Jy ! Component: 1550 - total flux cleaned = 0.000477317 Jy ! Component: 1600 - total flux cleaned = 0.000234475 Jy ! Component: 1650 - total flux cleaned = -5.79637e-05 Jy ! Component: 1700 - total flux cleaned = -0.000401266 Jy ! Component: 1750 - total flux cleaned = -0.000648014 Jy ! Component: 1800 - total flux cleaned = -0.000945892 Jy ! Component: 1850 - total flux cleaned = -0.00129508 Jy ! Component: 1900 - total flux cleaned = -0.00164722 Jy ! Component: 1950 - total flux cleaned = -0.00200261 Jy ! Component: 2000 - total flux cleaned = -0.00241267 Jy ! Component: 2050 - total flux cleaned = -0.00272303 Jy ! Component: 2100 - total flux cleaned = -0.00303587 Jy ! Component: 2150 - total flux cleaned = -0.00329977 Jy ! Component: 2200 - total flux cleaned = -0.00367352 Jy ! Component: 2250 - total flux cleaned = -0.00394267 Jy ! Component: 2300 - total flux cleaned = -0.00427029 Jy ! Component: 2350 - total flux cleaned = -0.00460166 Jy ! Component: 2400 - total flux cleaned = -0.00499278 Jy ! Component: 2450 - total flux cleaned = -0.00533268 Jy ! Component: 2500 - total flux cleaned = -0.00556159 Jy ! Component: 2550 - total flux cleaned = -0.00585231 Jy ! Component: 2600 - total flux cleaned = -0.00597038 Jy ! Component: 2650 - total flux cleaned = -0.0062698 Jy ! Component: 2700 - total flux cleaned = -0.00651341 Jy ! Component: 2750 - total flux cleaned = -0.00657516 Jy ! Component: 2800 - total flux cleaned = -0.00676254 Jy ! Component: 2850 - total flux cleaned = -0.00714595 Jy ! Component: 2900 - total flux cleaned = -0.00734086 Jy ! Component: 2950 - total flux cleaned = -0.00760443 Jy ! Component: 3000 - total flux cleaned = -0.00780542 Jy ! Component: 3050 - total flux cleaned = -0.0080793 Jy ! Component: 3100 - total flux cleaned = -0.00828803 Jy ! Component: 3150 - total flux cleaned = -0.00850028 Jy ! Component: 3200 - total flux cleaned = -0.00879068 Jy ! Component: 3250 - total flux cleaned = -0.00893921 Jy ! Component: 3300 - total flux cleaned = -0.00916502 Jy ! Component: 3350 - total flux cleaned = -0.00939442 Jy ! Component: 3400 - total flux cleaned = -0.00970802 Jy ! Component: 3450 - total flux cleaned = -0.00994773 Jy ! Component: 3500 - total flux cleaned = -0.0102725 Jy ! Component: 3550 - total flux cleaned = -0.0105229 Jy ! Component: 3600 - total flux cleaned = -0.010947 Jy ! Component: 3650 - total flux cleaned = -0.0111211 Jy ! Component: 3700 - total flux cleaned = -0.0114753 Jy ! Component: 3750 - total flux cleaned = -0.0116549 Jy ! Component: 3800 - total flux cleaned = -0.0119321 Jy ! Component: 3850 - total flux cleaned = -0.0121197 Jy ! Component: 3900 - total flux cleaned = -0.0123117 Jy ! Component: 3950 - total flux cleaned = -0.0127046 Jy ! Component: 4000 - total flux cleaned = -0.0129064 Jy ! Component: 4050 - total flux cleaned = -0.013009 Jy ! Total flux subtracted in 4096 components = -0.0130071 Jy ! Clean residual min=-0.006644 max=0.006915 Jy/beam ! Clean residual mean=-0.000126 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.416581 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 241 components and 0.416581 Jy ![Exited script file: muppet] wmap "J0357-4812_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.861 x 8.989 at -1.804 degrees (North through East) ! Clean map min=-0.0084319 max=0.33323 Jy/beam ! Writing clean map to FITS file: J0357-4812_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.333229 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0019201 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.72864 1.72864 3.45727 6.91455 13.8291 27.6582 55.3164 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0057 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.333 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.861 x 8.989 at -1.804 degrees (North through East) ! Clean map min=-0.0084319 max=0.33323 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0357-4812_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:41:31 2019