! Started logfile: J0356+0013_S_2017_09_26_pus_uvs.log on Sat May 11 12:54:22 2019 obs J0356+0013_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0356+0013_S_2017_09_26_pus_uva.fits ! AN table 1: 354 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.622254 visibilities/baseline/integration-bin. ! Found source: J0356+0013 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 31720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0356+0013_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 847 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 894 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 800 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2030 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999734Jy sigma=0.008727 ! Fit after self-cal, rms=0.958013Jy sigma=0.008387 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=14.39 mas, bpa=-18.91 degrees ! Estimated noise=1184.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342817 Jy ! Component: 100 - total flux cleaned = 0.0417576 Jy ! Total flux subtracted in 100 components = 0.0417576 Jy ! Clean residual min=-0.003500 max=0.003177 Jy/beam ! Clean residual mean=0.000002 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0417576 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0417576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075170Jy sigma=0.000606 ! Fit after self-cal, rms=0.073759Jy sigma=0.000593 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.051 mas, bmaj=15.04 mas, bpa=-17.68 degrees ! Estimated noise=548.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341243 Jy ! Component: 100 - total flux cleaned = 0.00451432 Jy ! Component: 150 - total flux cleaned = 0.00466357 Jy ! Component: 200 - total flux cleaned = 0.00476552 Jy ! Total flux subtracted in 200 components = 0.00476552 Jy ! Clean residual min=-0.001804 max=0.001793 Jy/beam ! Clean residual mean=-0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0465231 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.0465231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073538Jy sigma=0.000592 ! Fit after self-cal, rms=0.073523Jy sigma=0.000592 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 0.98 KP 0.95 ! LA 1.02 MK 1.03 NL 0.97 OV 1.13 ! PT 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.03 KP 1.02 ! LA 0.97 MK 0.99 NL 1.07 OV 1.12 ! PT 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.01 KP 0.94 ! LA 0.97 MK 1.05 NL 0.98 OV 0.98 ! PT 1.09 ! ! ! Correcting IF 4. ! A total of 651 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.80 KP 1.00* ! LA 0.84 MK 1.00 NL 1.00* OV 0.64 ! PT 0.87 ! ! ! Fit before self-cal, rms=0.073523Jy sigma=0.000592 ! Fit after self-cal, rms=0.070938Jy sigma=0.000589 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=14.64 mas, bpa=-17.56 degrees ! Estimated noise=562.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473185 Jy ! Component: 100 - total flux cleaned = 0.000430892 Jy ! Component: 150 - total flux cleaned = 0.000322558 Jy ! Component: 200 - total flux cleaned = 0.000229276 Jy ! Total flux subtracted in 200 components = 0.000229276 Jy ! Clean residual min=-0.001501 max=0.001449 Jy/beam ! Clean residual mean=-0.000002 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.0467524 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.0467524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070924Jy sigma=0.000589 ! Fit after self-cal, rms=0.070828Jy sigma=0.000589 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070828Jy sigma=0.000589 ! Fit after self-cal, rms=0.070009Jy sigma=0.000588 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.04 mas, bmaj=14.52 mas, bpa=-17.61 degrees ! Estimated noise=559.908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000254122 Jy ! Component: 100 - total flux cleaned = -0.00029034 Jy ! Component: 150 - total flux cleaned = -0.000318889 Jy ! Component: 200 - total flux cleaned = -0.000335492 Jy ! Total flux subtracted in 200 components = -0.000335492 Jy ! Clean residual min=-0.001118 max=0.001268 Jy/beam ! Clean residual mean=-0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.0464169 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.0464169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070006Jy sigma=0.000588 ! Fit after self-cal, rms=0.069965Jy sigma=0.000588 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198187 Jy ! Component: 100 - total flux cleaned = -0.000198854 Jy ! Component: 150 - total flux cleaned = -0.000190024 Jy ! Component: 200 - total flux cleaned = -0.000190069 Jy ! Total flux subtracted in 200 components = -0.000190069 Jy ! Clean residual min=-0.001160 max=0.001191 Jy/beam ! Clean residual mean=-0.000001 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.0462269 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.0462269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069961Jy sigma=0.000588 ! Fit after self-cal, rms=0.069961Jy sigma=0.000588 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069961Jy sigma=0.000588 ! Fit after self-cal, rms=0.069961Jy sigma=0.000587 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=14.5 mas, bpa=-17.63 degrees ! Estimated noise=559.024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106839 Jy ! Component: 100 - total flux cleaned = -0.000107576 Jy ! Component: 150 - total flux cleaned = -0.000114994 Jy ! Component: 200 - total flux cleaned = -0.000121224 Jy ! Total flux subtracted in 200 components = -0.000121224 Jy ! Clean residual min=-0.001055 max=0.001166 Jy/beam ! Clean residual mean=-0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0461056 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.0461056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069959Jy sigma=0.000587 ! Fit after self-cal, rms=0.069970Jy sigma=0.000587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133229 Jy ! Component: 100 - total flux cleaned = -0.000133478 Jy ! Component: 150 - total flux cleaned = -0.000133613 Jy ! Component: 200 - total flux cleaned = -0.000133538 Jy ! Total flux subtracted in 200 components = -0.000133538 Jy ! Clean residual min=-0.001025 max=0.001133 Jy/beam ! Clean residual mean=-0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0459721 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.0459721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069969Jy sigma=0.000587 ! Fit after self-cal, rms=0.069968Jy sigma=0.000587 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069968Jy sigma=0.000587 ! Fit after self-cal, rms=0.069995Jy sigma=0.000587 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.732 mas, bmaj=15.81 mas, bpa=-10.99 degrees ! Estimated noise=645.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181956 Jy ! Component: 100 - total flux cleaned = -0.000181737 Jy ! Component: 150 - total flux cleaned = -0.000189377 Jy ! Component: 200 - total flux cleaned = -0.000188939 Jy ! Total flux subtracted in 200 components = -0.000188939 Jy ! Clean residual min=-0.001120 max=0.000997 Jy/beam ! Clean residual mean=-0.000002 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0457831 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.0457831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069994Jy sigma=0.000587 ! Fit after self-cal, rms=0.069995Jy sigma=0.000587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142579 Jy ! Component: 100 - total flux cleaned = -0.000149904 Jy ! Component: 150 - total flux cleaned = -0.000149933 Jy ! Component: 200 - total flux cleaned = -0.000154456 Jy ! Total flux subtracted in 200 components = -0.000154456 Jy ! Clean residual min=-0.001073 max=0.000987 Jy/beam ! Clean residual mean=-0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0456287 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.0456287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069995Jy sigma=0.000587 ! Fit after self-cal, rms=0.069990Jy sigma=0.000587 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.022 mas, bmaj=14.51 mas, bpa=-17.65 degrees ! Estimated noise=558.554 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.022 x 14.51 at -17.65 degrees (North through East) ! Clean map min=-0.0013028 max=0.046117 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=13.93 mas, bpa=-18.86 degrees ! Estimated noise=1215.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344631 Jy ! Component: 100 - total flux cleaned = 0.0420623 Jy ! Component: 150 - total flux cleaned = 0.0446175 Jy ! Component: 200 - total flux cleaned = 0.0456126 Jy ! Total flux subtracted in 200 components = 0.0456126 Jy ! Clean residual min=-0.002612 max=0.002668 Jy/beam ! Clean residual mean=0.000002 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0456126 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0456126 Jy ! Inverting map and beam ! Estimated beam: bmin=4.022 mas, bmaj=14.51 mas, bpa=-17.65 degrees ! Estimated noise=558.554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407491 Jy ! Component: 100 - total flux cleaned = 0.000358441 Jy ! Component: 150 - total flux cleaned = 0.000360199 Jy ! Component: 200 - total flux cleaned = 0.00032903 Jy ! Total flux subtracted in 200 components = 0.00032903 Jy ! Clean residual min=-0.001160 max=0.001088 Jy/beam ! Clean residual mean=-0.000001 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.0459416 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 0.0459416 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.732 mas, bmaj=15.81 mas, bpa=-10.99 degrees ! Estimated noise=645.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255073 Jy ! Component: 100 - total flux cleaned = -0.000280911 Jy ! Component: 150 - total flux cleaned = -0.000299244 Jy ! Component: 200 - total flux cleaned = -0.000299531 Jy ! Total flux subtracted in 200 components = -0.000299531 Jy ! Clean residual min=-0.001093 max=0.001004 Jy/beam ! Clean residual mean=-0.000002 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0456421 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.43113e-05 Jy ! Component: 100 - total flux cleaned = -3.45917e-05 Jy ! Component: 150 - total flux cleaned = -6.14075e-05 Jy ! Component: 200 - total flux cleaned = -8.49538e-05 Jy ! Total flux subtracted in 200 components = -8.49538e-05 Jy ! Clean residual min=-0.001056 max=0.001016 Jy/beam ! Clean residual mean=-0.000002 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0455571 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 65 components and 0.0455571 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.022 mas, bmaj=14.51 mas, bpa=-17.65 degrees ! Estimated noise=558.554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183664 Jy ! Component: 100 - total flux cleaned = 0.00014814 Jy ! Component: 150 - total flux cleaned = 0.000100938 Jy ! Component: 200 - total flux cleaned = 7.31926e-05 Jy ! Total flux subtracted in 200 components = 7.31926e-05 Jy ! Clean residual min=-0.001022 max=0.001067 Jy/beam ! Clean residual mean=-0.000001 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.0456303 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.0456303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069996Jy sigma=0.000587 ! Fit after self-cal, rms=0.069998Jy sigma=0.000587 wmodel J0356+0013_S_2017_09_26_pus_map.mod ! Writing 79 model components to file: J0356+0013_S_2017_09_26_pus_map.mod wobs J0356+0013_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0356+0013_S_2017_09_26_pus_uvs.fits wwins J0356+0013_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0356+0013_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.70581e-05 Jy ! Component: 100 - total flux cleaned = 2.9633e-05 Jy ! Component: 150 - total flux cleaned = 0.000109943 Jy ! Component: 200 - total flux cleaned = 0.000155849 Jy ! Component: 250 - total flux cleaned = 0.000170907 Jy ! Component: 300 - total flux cleaned = 0.000213518 Jy ! Component: 350 - total flux cleaned = 0.000254702 Jy ! Component: 400 - total flux cleaned = 0.000321382 Jy ! Component: 450 - total flux cleaned = 0.000398902 Jy ! Component: 500 - total flux cleaned = 0.000449299 Jy ! Component: 550 - total flux cleaned = 0.000486134 Jy ! Component: 600 - total flux cleaned = 0.000546339 Jy ! Component: 650 - total flux cleaned = 0.0005814 Jy ! Component: 700 - total flux cleaned = 0.00061566 Jy ! Component: 750 - total flux cleaned = 0.000604649 Jy ! Component: 800 - total flux cleaned = 0.000637767 Jy ! Component: 850 - total flux cleaned = 0.000637596 Jy ! Component: 900 - total flux cleaned = 0.000637661 Jy ! Component: 950 - total flux cleaned = 0.000637909 Jy ! Component: 1000 - total flux cleaned = 0.000647956 Jy ! Component: 1050 - total flux cleaned = 0.000617622 Jy ! Component: 1100 - total flux cleaned = 0.000597641 Jy ! Component: 1150 - total flux cleaned = 0.000568353 Jy ! Component: 1200 - total flux cleaned = 0.000558672 Jy ! Component: 1250 - total flux cleaned = 0.000521066 Jy ! Component: 1300 - total flux cleaned = 0.00052099 Jy ! Component: 1350 - total flux cleaned = 0.000484327 Jy ! Component: 1400 - total flux cleaned = 0.000448424 Jy ! Component: 1450 - total flux cleaned = 0.000421619 Jy ! Component: 1500 - total flux cleaned = 0.000404174 Jy ! Component: 1550 - total flux cleaned = 0.000404281 Jy ! Component: 1600 - total flux cleaned = 0.000395697 Jy ! Component: 1650 - total flux cleaned = 0.000395701 Jy ! Component: 1700 - total flux cleaned = 0.000345646 Jy ! Component: 1750 - total flux cleaned = 0.000353939 Jy ! Component: 1800 - total flux cleaned = 0.000362029 Jy ! Component: 1850 - total flux cleaned = 0.000337794 Jy ! Component: 1900 - total flux cleaned = 0.000345723 Jy ! Component: 1950 - total flux cleaned = 0.000306267 Jy ! Component: 2000 - total flux cleaned = 0.000267416 Jy ! Component: 2050 - total flux cleaned = 0.000252175 Jy ! Component: 2100 - total flux cleaned = 0.000236999 Jy ! Component: 2150 - total flux cleaned = 0.000191788 Jy ! Component: 2200 - total flux cleaned = 0.000184291 Jy ! Component: 2250 - total flux cleaned = 0.000147459 Jy ! Component: 2300 - total flux cleaned = 0.000118291 Jy ! Component: 2350 - total flux cleaned = 0.000103856 Jy ! Component: 2400 - total flux cleaned = 8.9557e-05 Jy ! Component: 2450 - total flux cleaned = 8.23215e-05 Jy ! Component: 2500 - total flux cleaned = 5.41615e-05 Jy ! Component: 2550 - total flux cleaned = 4.02503e-05 Jy ! Component: 2600 - total flux cleaned = 5.39733e-05 Jy ! Component: 2650 - total flux cleaned = 3.34877e-05 Jy ! Component: 2700 - total flux cleaned = 4.03244e-05 Jy ! Component: 2750 - total flux cleaned = 4.03249e-05 Jy ! Component: 2800 - total flux cleaned = 3.3641e-05 Jy ! Component: 2850 - total flux cleaned = 4.68434e-05 Jy ! Component: 2900 - total flux cleaned = 2.70966e-05 Jy ! Component: 2950 - total flux cleaned = 4.65527e-05 Jy ! Component: 3000 - total flux cleaned = 4.01664e-05 Jy ! Component: 3050 - total flux cleaned = 4.01918e-05 Jy ! Component: 3100 - total flux cleaned = 1.48248e-05 Jy ! Component: 3150 - total flux cleaned = 2.11357e-05 Jy ! Component: 3200 - total flux cleaned = 8.73529e-06 Jy ! Component: 3250 - total flux cleaned = -3.65699e-06 Jy ! Component: 3300 - total flux cleaned = -2.20176e-05 Jy ! Component: 3350 - total flux cleaned = -5.86623e-05 Jy ! Component: 3400 - total flux cleaned = -0.000113157 Jy ! Component: 3450 - total flux cleaned = -0.000125117 Jy ! Component: 3500 - total flux cleaned = -0.000154951 Jy ! Component: 3550 - total flux cleaned = -0.000190573 Jy ! Component: 3600 - total flux cleaned = -0.000202388 Jy ! Component: 3650 - total flux cleaned = -0.000231684 Jy ! Component: 3700 - total flux cleaned = -0.000272436 Jy ! Component: 3750 - total flux cleaned = -0.000307108 Jy ! Component: 3800 - total flux cleaned = -0.00033586 Jy ! Component: 3850 - total flux cleaned = -0.000375781 Jy ! Component: 3900 - total flux cleaned = -0.000404112 Jy ! Component: 3950 - total flux cleaned = -0.000426701 Jy ! Component: 4000 - total flux cleaned = -0.000449125 Jy ! Component: 4050 - total flux cleaned = -0.00047699 Jy ! Total flux subtracted in 4096 components = -0.000493652 Jy ! Clean residual min=-0.000379 max=0.000349 Jy/beam ! Clean residual mean=-0.000001 rms=0.000104 Jy/beam ! Combined flux in latest and established models = 0.0451366 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 352 components and 0.0451366 Jy ![Exited script file: muppet] wmap "J0356+0013_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.022 x 14.51 at -17.65 degrees (North through East) ! Clean map min=-0.0014753 max=0.045909 Jy/beam ! Writing clean map to FITS file: J0356+0013_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0459085 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000103327 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.675218 0.675218 1.35044 2.70087 5.40174 10.8035 21.607 43.2139 86.4278 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.022 x 14.51 at -17.65 degrees (North through East) ! Clean map min=-0.0014753 max=0.045909 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0356+0013_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:54:28 2019