! Started logfile: J0354+0441_S_2017_05_27_pus_uvs.log on Fri May 3 10:56:22 2019 obs J0354+0441_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0354+0441_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970955 visibilities/baseline/integration-bin. ! Found source: J0354+0441 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19924 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0354+0441_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 591 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.712119Jy sigma=0.008383 ! Fit after self-cal, rms=0.690000Jy sigma=0.008273 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.683 mas, bmaj=6.951 mas, bpa=-5.037 degrees ! Estimated noise=844.949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222765 Jy ! Component: 100 - total flux cleaned = 0.276539 Jy ! Total flux subtracted in 100 components = 0.276539 Jy ! Clean residual min=-0.016750 max=0.026152 Jy/beam ! Clean residual mean=0.000030 rms=0.004921 Jy/beam ! Combined flux in latest and established models = 0.276539 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.276539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143915Jy sigma=0.001688 ! Fit after self-cal, rms=0.143872Jy sigma=0.001688 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=8.081 mas, bpa=-5.402 degrees ! Estimated noise=678.714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282478 Jy ! Component: 100 - total flux cleaned = 0.0428203 Jy ! Component: 150 - total flux cleaned = 0.0511452 Jy ! Component: 200 - total flux cleaned = 0.0560817 Jy ! Total flux subtracted in 200 components = 0.0560817 Jy ! Clean residual min=-0.017838 max=0.018602 Jy/beam ! Clean residual mean=0.000009 rms=0.004029 Jy/beam ! Combined flux in latest and established models = 0.332621 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 40 components and 0.332621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134698Jy sigma=0.001686 ! Fit after self-cal, rms=0.134636Jy sigma=0.001685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.95 HN 0.92 KP 0.99 ! LA 0.99 MK 0.97 NL 0.86 OV 1.04 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.99 HN 0.95 KP 0.96 ! LA 0.93 MK 0.80 NL 1.02 OV 1.06 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.03 FD 1.03 HN 0.92 KP 0.97 ! LA 1.00 MK 6.10 NL 1.00 OV 0.98 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 0.88 KP 1.00* ! LA 0.97 MK 0.92 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.134636Jy sigma=0.001685 ! Fit after self-cal, rms=0.549844Jy sigma=0.000939 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.253 mas, bpa=-4.335 degrees ! Estimated noise=735.297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797768 Jy ! Component: 100 - total flux cleaned = 0.00541939 Jy ! Component: 150 - total flux cleaned = 0.00342504 Jy ! Component: 200 - total flux cleaned = 0.00151918 Jy ! Total flux subtracted in 200 components = 0.00151918 Jy ! Clean residual min=-0.012431 max=0.011933 Jy/beam ! Clean residual mean=0.000001 rms=0.002692 Jy/beam ! Combined flux in latest and established models = 0.33414 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.33414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541640Jy sigma=0.000949 ! Fit after self-cal, rms=0.541798Jy sigma=0.000947 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541798Jy sigma=0.000947 ! Fit after self-cal, rms=0.574512Jy sigma=0.000824 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=8.23 mas, bpa=-4.369 degrees ! Estimated noise=763.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010079 Jy ! Component: 100 - total flux cleaned = 0.0086756 Jy ! Component: 150 - total flux cleaned = 0.00729972 Jy ! Component: 200 - total flux cleaned = 0.00593027 Jy ! Total flux subtracted in 200 components = 0.00593027 Jy ! Clean residual min=-0.009805 max=0.010395 Jy/beam ! Clean residual mean=0.000001 rms=0.002239 Jy/beam ! Combined flux in latest and established models = 0.34007 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.34007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.570569Jy sigma=0.000827 ! Fit after self-cal, rms=0.570576Jy sigma=0.000826 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00735066 Jy ! Component: 100 - total flux cleaned = 0.00935314 Jy ! Component: 150 - total flux cleaned = 0.0112124 Jy ! Component: 200 - total flux cleaned = 0.0128637 Jy ! Total flux subtracted in 200 components = 0.0128637 Jy ! Clean residual min=-0.008748 max=0.009358 Jy/beam ! Clean residual mean=-0.000000 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 0.352934 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.352934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568733Jy sigma=0.000820 ! Fit after self-cal, rms=0.568718Jy sigma=0.000820 ! Inverting map ! Added new window around map position (-84, 116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772948 Jy ! Component: 100 - total flux cleaned = -5.17156e-05 Jy ! Component: 150 - total flux cleaned = 0.000876444 Jy ! Component: 200 - total flux cleaned = 0.00152113 Jy ! Total flux subtracted in 200 components = 0.00152113 Jy ! Clean residual min=-0.007782 max=0.009481 Jy/beam ! Clean residual mean=-0.000002 rms=0.001953 Jy/beam ! Combined flux in latest and established models = 0.354455 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 0.354455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.567030Jy sigma=0.000819 ! Fit after self-cal, rms=0.567010Jy sigma=0.000819 ! Inverting map ! Added new window around map position (84.5, -117.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002554 Jy ! Component: 100 - total flux cleaned = -0.000776528 Jy ! Component: 150 - total flux cleaned = -0.000558388 Jy ! Component: 200 - total flux cleaned = 0.000280152 Jy ! Total flux subtracted in 200 components = 0.000280152 Jy ! Clean residual min=-0.008014 max=0.007844 Jy/beam ! Clean residual mean=-0.000004 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 0.354736 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 106 components and 0.354735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565334Jy sigma=0.000819 ! Fit after self-cal, rms=0.565333Jy sigma=0.000819 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565333Jy sigma=0.000819 ! Fit after self-cal, rms=0.526141Jy sigma=0.000731 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=8.213 mas, bpa=-4.485 degrees ! Estimated noise=770.831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488659 Jy ! Component: 100 - total flux cleaned = 0.00610853 Jy ! Component: 150 - total flux cleaned = 0.00662655 Jy ! Component: 200 - total flux cleaned = 0.00662779 Jy ! Total flux subtracted in 200 components = 0.00662779 Jy ! Clean residual min=-0.004471 max=0.003950 Jy/beam ! Clean residual mean=-0.000007 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.361363 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 124 components and 0.361363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525351Jy sigma=0.000730 ! Fit after self-cal, rms=0.525344Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494305 Jy ! Component: 100 - total flux cleaned = 0.000388319 Jy ! Component: 150 - total flux cleaned = 0.000490945 Jy ! Component: 200 - total flux cleaned = 0.000586273 Jy ! Total flux subtracted in 200 components = 0.000586273 Jy ! Clean residual min=-0.004444 max=0.003927 Jy/beam ! Clean residual mean=-0.000007 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.36195 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 0.36195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525005Jy sigma=0.000729 ! Fit after self-cal, rms=0.525003Jy sigma=0.000729 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525003Jy sigma=0.000729 ! Fit after self-cal, rms=0.536755Jy sigma=0.000728 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.478 mas, bmaj=12.8 mas, bpa=-7.263 degrees ! Estimated noise=938.928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032251 Jy ! Component: 100 - total flux cleaned = 0.00374226 Jy ! Component: 150 - total flux cleaned = 0.00417092 Jy ! Component: 200 - total flux cleaned = 0.00456006 Jy ! Total flux subtracted in 200 components = 0.00456006 Jy ! Clean residual min=-0.004106 max=0.004229 Jy/beam ! Clean residual mean=-0.000008 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.36651 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 151 components and 0.36651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536218Jy sigma=0.000728 ! Fit after self-cal, rms=0.536209Jy sigma=0.000728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.78869e-05 Jy ! Component: 100 - total flux cleaned = 0.000374998 Jy ! Component: 150 - total flux cleaned = 0.00071206 Jy ! Component: 200 - total flux cleaned = 0.000892961 Jy ! Total flux subtracted in 200 components = 0.000892961 Jy ! Clean residual min=-0.003983 max=0.004212 Jy/beam ! Clean residual mean=-0.000007 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.367403 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 161 components and 0.367403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.535965Jy sigma=0.000728 ! Fit after self-cal, rms=0.535961Jy sigma=0.000728 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=8.216 mas, bpa=-4.498 degrees ! Estimated noise=780.693 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 8.216 at -4.498 degrees (North through East) ! Clean map min=-0.0065252 max=0.34153 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=6.999 mas, bpa=-3.994 degrees ! Estimated noise=1003.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264637 Jy ! Component: 100 - total flux cleaned = 0.322362 Jy ! Component: 150 - total flux cleaned = 0.340056 Jy ! Component: 200 - total flux cleaned = 0.349168 Jy ! Total flux subtracted in 200 components = 0.349168 Jy ! Clean residual min=-0.009412 max=0.007079 Jy/beam ! Clean residual mean=0.000006 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.349168 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.349168 Jy ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=8.216 mas, bpa=-4.498 degrees ! Estimated noise=780.693 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00927669 Jy ! Component: 100 - total flux cleaned = 0.0118443 Jy ! Component: 150 - total flux cleaned = 0.0127266 Jy ! Component: 200 - total flux cleaned = 0.0133379 Jy ! Total flux subtracted in 200 components = 0.0133379 Jy ! Clean residual min=-0.006004 max=0.004521 Jy/beam ! Clean residual mean=0.000001 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.362506 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 0.362506 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.478 mas, bmaj=12.8 mas, bpa=-7.263 degrees ! Estimated noise=938.928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287887 Jy ! Component: 100 - total flux cleaned = 0.00358767 Jy ! Component: 150 - total flux cleaned = 0.00388608 Jy ! Component: 200 - total flux cleaned = 0.00402365 Jy ! Total flux subtracted in 200 components = 0.00402365 Jy ! Clean residual min=-0.004023 max=0.004834 Jy/beam ! Clean residual mean=0.000000 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.366529 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252003 Jy ! Component: 100 - total flux cleaned = 0.000366958 Jy ! Component: 150 - total flux cleaned = 0.00036516 Jy ! Component: 200 - total flux cleaned = 0.000469844 Jy ! Total flux subtracted in 200 components = 0.000469844 Jy ! Clean residual min=-0.003880 max=0.004519 Jy/beam ! Clean residual mean=-0.000000 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.366999 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 71 components and 0.366999 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=8.216 mas, bpa=-4.498 degrees ! Estimated noise=780.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140445 Jy ! Component: 100 - total flux cleaned = -0.000969752 Jy ! Component: 150 - total flux cleaned = -0.000571792 Jy ! Component: 200 - total flux cleaned = -0.000197327 Jy ! Total flux subtracted in 200 components = -0.000197327 Jy ! Clean residual min=-0.004926 max=0.003752 Jy/beam ! Clean residual mean=-0.000000 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.366802 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.366802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536541Jy sigma=0.000727 ! Fit after self-cal, rms=0.536530Jy sigma=0.000727 wmodel J0354+0441_S_2017_05_27_pus_map.mod ! Writing 91 model components to file: J0354+0441_S_2017_05_27_pus_map.mod wobs J0354+0441_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0354+0441_S_2017_05_27_pus_uvs.fits wwins J0354+0441_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J0354+0441_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206434 Jy ! Component: 100 - total flux cleaned = -0.00365918 Jy ! Component: 150 - total flux cleaned = -0.00512525 Jy ! Component: 200 - total flux cleaned = -0.00640748 Jy ! Component: 250 - total flux cleaned = -0.00772637 Jy ! Component: 300 - total flux cleaned = -0.0088113 Jy ! Component: 350 - total flux cleaned = -0.00987216 Jy ! Component: 400 - total flux cleaned = -0.0108461 Jy ! Component: 450 - total flux cleaned = -0.0118007 Jy ! Component: 500 - total flux cleaned = -0.012799 Jy ! Component: 550 - total flux cleaned = -0.0137189 Jy ! Component: 600 - total flux cleaned = -0.0142622 Jy ! Component: 650 - total flux cleaned = -0.015038 Jy ! Component: 700 - total flux cleaned = -0.015686 Jy ! Component: 750 - total flux cleaned = -0.0162106 Jy ! Component: 800 - total flux cleaned = -0.0169608 Jy ! Component: 850 - total flux cleaned = -0.0173611 Jy ! Component: 900 - total flux cleaned = -0.0180407 Jy ! Component: 950 - total flux cleaned = -0.0184332 Jy ! Component: 1000 - total flux cleaned = -0.0187669 Jy ! Component: 1050 - total flux cleaned = -0.0192635 Jy ! Component: 1100 - total flux cleaned = -0.0195924 Jy ! Component: 1150 - total flux cleaned = -0.0200275 Jy ! Component: 1200 - total flux cleaned = -0.0205663 Jy ! Component: 1250 - total flux cleaned = -0.0208872 Jy ! Component: 1300 - total flux cleaned = -0.0213116 Jy ! Component: 1350 - total flux cleaned = -0.02168 Jy ! Component: 1400 - total flux cleaned = -0.0221499 Jy ! Component: 1450 - total flux cleaned = -0.0223575 Jy ! Component: 1500 - total flux cleaned = -0.0226668 Jy ! Component: 1550 - total flux cleaned = -0.022974 Jy ! Component: 1600 - total flux cleaned = -0.0234319 Jy ! Component: 1650 - total flux cleaned = -0.0235831 Jy ! Component: 1700 - total flux cleaned = -0.0238845 Jy ! Component: 1750 - total flux cleaned = -0.0241342 Jy ! Component: 1800 - total flux cleaned = -0.0244822 Jy ! Component: 1850 - total flux cleaned = -0.0248767 Jy ! Component: 1900 - total flux cleaned = -0.0251709 Jy ! Component: 1950 - total flux cleaned = -0.0253173 Jy ! Component: 2000 - total flux cleaned = -0.0257056 Jy ! Component: 2050 - total flux cleaned = -0.0258989 Jy ! Component: 2100 - total flux cleaned = -0.0261399 Jy ! Component: 2150 - total flux cleaned = -0.0265704 Jy ! Component: 2200 - total flux cleaned = -0.0268085 Jy ! Component: 2250 - total flux cleaned = -0.0271401 Jy ! Component: 2300 - total flux cleaned = -0.0273755 Jy ! Component: 2350 - total flux cleaned = -0.0277037 Jy ! Component: 2400 - total flux cleaned = -0.0278903 Jy ! Component: 2450 - total flux cleaned = -0.0282157 Jy ! Component: 2500 - total flux cleaned = -0.0283081 Jy ! Component: 2550 - total flux cleaned = -0.0285386 Jy ! Component: 2600 - total flux cleaned = -0.0289511 Jy ! Component: 2650 - total flux cleaned = -0.0289965 Jy ! Component: 2700 - total flux cleaned = -0.029178 Jy ! Component: 2750 - total flux cleaned = -0.0293592 Jy ! Component: 2800 - total flux cleaned = -0.0295844 Jy ! Component: 2850 - total flux cleaned = -0.0297636 Jy ! Component: 2900 - total flux cleaned = -0.0299422 Jy ! Component: 2950 - total flux cleaned = -0.0301203 Jy ! Component: 3000 - total flux cleaned = -0.0301645 Jy ! Component: 3050 - total flux cleaned = -0.0303854 Jy ! Component: 3100 - total flux cleaned = -0.0305174 Jy ! Component: 3150 - total flux cleaned = -0.0307363 Jy ! Component: 3200 - total flux cleaned = -0.0307362 Jy ! Component: 3250 - total flux cleaned = -0.0311708 Jy ! Component: 3300 - total flux cleaned = -0.0312139 Jy ! Component: 3350 - total flux cleaned = -0.0313865 Jy ! Component: 3400 - total flux cleaned = -0.0315153 Jy ! Component: 3450 - total flux cleaned = -0.0317298 Jy ! Component: 3500 - total flux cleaned = -0.0319435 Jy ! Component: 3550 - total flux cleaned = -0.0321135 Jy ! Component: 3600 - total flux cleaned = -0.0322407 Jy ! Component: 3650 - total flux cleaned = -0.0324099 Jy ! Component: 3700 - total flux cleaned = -0.0327049 Jy ! Component: 3750 - total flux cleaned = -0.0327886 Jy ! Component: 3800 - total flux cleaned = -0.033207 Jy ! Component: 3850 - total flux cleaned = -0.0332903 Jy ! Component: 3900 - total flux cleaned = -0.0332901 Jy ! Component: 3950 - total flux cleaned = -0.0335803 Jy ! Component: 4000 - total flux cleaned = -0.0337456 Jy ! Component: 4050 - total flux cleaned = -0.0339514 Jy ! Total flux subtracted in 4096 components = -0.0341154 Jy ! Clean residual min=-0.002472 max=0.002051 Jy/beam ! Clean residual mean=-0.000002 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.332686 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 352 components and 0.332686 Jy ![Exited script file: muppet] wmap "J0354+0441_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 8.216 at -4.498 degrees (North through East) ! Clean map min=-0.0059294 max=0.34802 Jy/beam ! Writing clean map to FITS file: J0354+0441_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.348019 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000762242 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.657069 0.657069 1.31414 2.62827 5.25655 10.5131 21.0262 42.0524 84.1048 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.348 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 8.216 at -4.498 degrees (North through East) ! Clean map min=-0.0059294 max=0.34802 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0354+0441_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:56:28 2019