! Started logfile: J0350+0506_S_2017_05_01_pus_uvs.log on Wed May 1 18:26:51 2019 obs J0350+0506_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0350+0506_S_2017_05_01_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.947886 visibilities/baseline/integration-bin. ! Found source: J0350+0506 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0350+0506_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 516 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.843684Jy sigma=0.006304 ! Fit after self-cal, rms=0.829584Jy sigma=0.006218 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.035 mas, bpa=-2.643 degrees ! Estimated noise=990.746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140159 Jy ! Component: 100 - total flux cleaned = 0.208867 Jy ! Total flux subtracted in 100 components = 0.208867 Jy ! Clean residual min=-0.022090 max=0.059263 Jy/beam ! Clean residual mean=0.000100 rms=0.006601 Jy/beam ! Combined flux in latest and established models = 0.208867 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.208867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174664Jy sigma=0.001340 ! Fit after self-cal, rms=0.173410Jy sigma=0.001333 ! Inverting map ! Added new window around map position (-5, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557338 Jy ! Component: 100 - total flux cleaned = 0.0917256 Jy ! Total flux subtracted in 100 components = 0.0917256 Jy ! Clean residual min=-0.015391 max=0.054209 Jy/beam ! Clean residual mean=0.000067 rms=0.004857 Jy/beam ! Combined flux in latest and established models = 0.300593 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.300593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145729Jy sigma=0.001094 ! Fit after self-cal, rms=0.142230Jy sigma=0.001064 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413355 Jy ! Component: 100 - total flux cleaned = 0.0638987 Jy ! Total flux subtracted in 100 components = 0.0638987 Jy ! Clean residual min=-0.011960 max=0.038512 Jy/beam ! Clean residual mean=0.000047 rms=0.003600 Jy/beam ! Combined flux in latest and established models = 0.364491 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.364491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125628Jy sigma=0.000923 ! Fit after self-cal, rms=0.122058Jy sigma=0.000891 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295748 Jy ! Component: 100 - total flux cleaned = 0.0437384 Jy ! Total flux subtracted in 100 components = 0.0437384 Jy ! Clean residual min=-0.009948 max=0.028304 Jy/beam ! Clean residual mean=0.000033 rms=0.002718 Jy/beam ! Combined flux in latest and established models = 0.40823 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.40823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112907Jy sigma=0.000814 ! Fit after self-cal, rms=0.111355Jy sigma=0.000800 ! Inverting map ! Added new window around map position (5, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236045 Jy ! Component: 100 - total flux cleaned = 0.0354116 Jy ! Total flux subtracted in 100 components = 0.0354116 Jy ! Clean residual min=-0.008768 max=0.011373 Jy/beam ! Clean residual mean=0.000022 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.443641 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.443641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104876Jy sigma=0.000744 ! Fit after self-cal, rms=0.104586Jy sigma=0.000742 ! Inverting map ! Added new window around map position (1.5, -27). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857413 Jy ! Component: 100 - total flux cleaned = 0.0151156 Jy ! Total flux subtracted in 100 components = 0.0151156 Jy ! Clean residual min=-0.006415 max=0.007473 Jy/beam ! Clean residual mean=0.000019 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.458757 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.458757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102287Jy sigma=0.000723 ! Fit after self-cal, rms=0.102185Jy sigma=0.000722 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=7.793 mas, bpa=-0.4693 degrees ! Estimated noise=746.859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134916 Jy ! Component: 100 - total flux cleaned = 0.0230343 Jy ! Component: 150 - total flux cleaned = 0.0301895 Jy ! Component: 200 - total flux cleaned = 0.0341333 Jy ! Total flux subtracted in 200 components = 0.0341333 Jy ! Clean residual min=-0.005618 max=0.008019 Jy/beam ! Clean residual mean=0.000045 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.49289 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 99 components and 0.49289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099783Jy sigma=0.000702 ! Fit after self-cal, rms=0.099704Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.01 KP 1.01 ! LA 0.96 MK 1.05 NL 0.98 OV 1.06 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.10 KP 0.99 ! LA 0.93 MK 0.99 NL 1.05 OV 1.08 ! PT 0.96 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.07 KP 1.02 ! LA 0.97 MK 1.05 NL 1.09 OV 1.00 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.09 HN 0.99 KP 1.00* ! LA 0.91 MK 0.89 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.099704Jy sigma=0.000701 ! Fit after self-cal, rms=0.101298Jy sigma=0.000688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=7.889 mas, bpa=-0.8402 degrees ! Estimated noise=766.018 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044862 Jy ! Component: 100 - total flux cleaned = 0.00701874 Jy ! Component: 150 - total flux cleaned = 0.00906032 Jy ! Component: 200 - total flux cleaned = 0.0107165 Jy ! Total flux subtracted in 200 components = 0.0107165 Jy ! Clean residual min=-0.004231 max=0.004336 Jy/beam ! Clean residual mean=-0.000001 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.503607 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 0.503607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100510Jy sigma=0.000682 ! Fit after self-cal, rms=0.100462Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100462Jy sigma=0.000682 ! Fit after self-cal, rms=0.100510Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=7.885 mas, bpa=-0.4425 degrees ! Estimated noise=761.734 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622866 Jy ! Component: 100 - total flux cleaned = 0.00188428 Jy ! Component: 150 - total flux cleaned = 0.00300857 Jy ! Component: 200 - total flux cleaned = 0.00413818 Jy ! Total flux subtracted in 200 components = 0.00413818 Jy ! Clean residual min=-0.003866 max=0.004708 Jy/beam ! Clean residual mean=0.000001 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.507745 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 136 components and 0.507745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100147Jy sigma=0.000674 ! Fit after self-cal, rms=0.100118Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335933 Jy ! Component: 100 - total flux cleaned = 0.00383571 Jy ! Component: 150 - total flux cleaned = 0.00468287 Jy ! Component: 200 - total flux cleaned = 0.00535677 Jy ! Total flux subtracted in 200 components = 0.00535677 Jy ! Clean residual min=-0.003554 max=0.003220 Jy/beam ! Clean residual mean=-0.000002 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.513102 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 148 components and 0.513102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099827Jy sigma=0.000672 ! Fit after self-cal, rms=0.099813Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099813Jy sigma=0.000672 ! Fit after self-cal, rms=0.099908Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=7.854 mas, bpa=-0.03596 degrees ! Estimated noise=755.792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386905 Jy ! Component: 100 - total flux cleaned = 0.00114065 Jy ! Component: 150 - total flux cleaned = 0.00182338 Jy ! Component: 200 - total flux cleaned = 0.00245804 Jy ! Total flux subtracted in 200 components = 0.00245804 Jy ! Clean residual min=-0.003450 max=0.002908 Jy/beam ! Clean residual mean=-0.000001 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.51556 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 159 components and 0.51556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099739Jy sigma=0.000670 ! Fit after self-cal, rms=0.099735Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030847 Jy ! Component: 100 - total flux cleaned = 0.000824523 Jy ! Component: 150 - total flux cleaned = 0.00137631 Jy ! Component: 200 - total flux cleaned = 0.00183042 Jy ! Total flux subtracted in 200 components = 0.00183042 Jy ! Clean residual min=-0.003290 max=0.002747 Jy/beam ! Clean residual mean=-0.000002 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.51739 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 172 components and 0.51739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099636Jy sigma=0.000670 ! Fit after self-cal, rms=0.099629Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099629Jy sigma=0.000670 ! Fit after self-cal, rms=0.099284Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.637 mas, bmaj=11.68 mas, bpa=2.237 degrees ! Estimated noise=892.348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233347 Jy ! Component: 100 - total flux cleaned = 0.00314208 Jy ! Component: 150 - total flux cleaned = 0.00373038 Jy ! Component: 200 - total flux cleaned = 0.00413362 Jy ! Total flux subtracted in 200 components = 0.00413362 Jy ! Clean residual min=-0.002581 max=0.002472 Jy/beam ! Clean residual mean=-0.000007 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.521524 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 202 components and 0.521524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099250Jy sigma=0.000669 ! Fit after self-cal, rms=0.099241Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287067 Jy ! Component: 100 - total flux cleaned = 0.000580058 Jy ! Component: 150 - total flux cleaned = 0.000797223 Jy ! Component: 200 - total flux cleaned = 0.000862409 Jy ! Total flux subtracted in 200 components = 0.000862409 Jy ! Clean residual min=-0.002616 max=0.002402 Jy/beam ! Clean residual mean=-0.000008 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.522386 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 219 components and 0.522386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099227Jy sigma=0.000669 ! Fit after self-cal, rms=0.099220Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=7.834 mas, bpa=0.2506 degrees ! Estimated noise=752.036 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.483 x 7.834 at 0.2506 degrees (North through East) ! Clean map min=-0.0028775 max=0.14192 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.032 mas, bpa=-1.998 degrees ! Estimated noise=1005.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145026 Jy ! Component: 100 - total flux cleaned = 0.235999 Jy ! Component: 150 - total flux cleaned = 0.297532 Jy ! Component: 200 - total flux cleaned = 0.341069 Jy ! Total flux subtracted in 200 components = 0.341069 Jy ! Clean residual min=-0.011032 max=0.024562 Jy/beam ! Clean residual mean=0.000052 rms=0.003394 Jy/beam ! Combined flux in latest and established models = 0.341069 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.341069 Jy ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=7.834 mas, bpa=0.2506 degrees ! Estimated noise=752.036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436764 Jy ! Component: 100 - total flux cleaned = 0.0720036 Jy ! Component: 150 - total flux cleaned = 0.0909921 Jy ! Component: 200 - total flux cleaned = 0.104591 Jy ! Total flux subtracted in 200 components = 0.104591 Jy ! Clean residual min=-0.005555 max=0.007928 Jy/beam ! Clean residual mean=0.000055 rms=0.001944 Jy/beam ! Combined flux in latest and established models = 0.44566 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 88 components and 0.44566 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.637 mas, bmaj=11.68 mas, bpa=2.237 degrees ! Estimated noise=892.348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175288 Jy ! Component: 100 - total flux cleaned = 0.0295683 Jy ! Component: 150 - total flux cleaned = 0.0387438 Jy ! Component: 200 - total flux cleaned = 0.045974 Jy ! Total flux subtracted in 200 components = 0.045974 Jy ! Clean residual min=-0.004837 max=0.004901 Jy/beam ! Clean residual mean=0.000037 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.491634 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577259 Jy ! Component: 100 - total flux cleaned = 0.0104344 Jy ! Component: 150 - total flux cleaned = 0.0142283 Jy ! Component: 200 - total flux cleaned = 0.0173422 Jy ! Total flux subtracted in 200 components = 0.0173422 Jy ! Clean residual min=-0.003542 max=0.003127 Jy/beam ! Clean residual mean=0.000012 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.508977 Jy ! Adding 135 model components to the UV plane model. ! The established model now contains 197 components and 0.508977 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=7.834 mas, bpa=0.2506 degrees ! Estimated noise=752.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289583 Jy ! Component: 100 - total flux cleaned = 0.00495492 Jy ! Component: 150 - total flux cleaned = 0.00640731 Jy ! Component: 200 - total flux cleaned = 0.00734846 Jy ! Total flux subtracted in 200 components = 0.00734846 Jy ! Clean residual min=-0.002863 max=0.003107 Jy/beam ! Clean residual mean=0.000000 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.516325 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 219 components and 0.516325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099272Jy sigma=0.000669 ! Fit after self-cal, rms=0.099119Jy sigma=0.000669 wmodel J0350+0506_S_2017_05_01_pus_map.mod ! Writing 219 model components to file: J0350+0506_S_2017_05_01_pus_map.mod wobs J0350+0506_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0350+0506_S_2017_05_01_pus_uvs.fits wwins J0350+0506_S_2017_05_01_pus_map.win ! wwins: Wrote 6 windows to J0350+0506_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333995 Jy ! Component: 100 - total flux cleaned = 0.000375259 Jy ! Component: 150 - total flux cleaned = 0.000545156 Jy ! Component: 200 - total flux cleaned = 0.00062652 Jy ! Component: 250 - total flux cleaned = 0.000743865 Jy ! Component: 300 - total flux cleaned = 0.000781407 Jy ! Component: 350 - total flux cleaned = 0.000854149 Jy ! Component: 400 - total flux cleaned = 0.000959323 Jy ! Component: 450 - total flux cleaned = 0.00102708 Jy ! Component: 500 - total flux cleaned = 0.00105996 Jy ! Component: 550 - total flux cleaned = 0.00115846 Jy ! Component: 600 - total flux cleaned = 0.0012233 Jy ! Component: 650 - total flux cleaned = 0.00138073 Jy ! Component: 700 - total flux cleaned = 0.00144151 Jy ! Component: 750 - total flux cleaned = 0.00141097 Jy ! Component: 800 - total flux cleaned = 0.00147115 Jy ! Component: 850 - total flux cleaned = 0.00155855 Jy ! Component: 900 - total flux cleaned = 0.00150086 Jy ! Component: 950 - total flux cleaned = 0.00161487 Jy ! Component: 1000 - total flux cleaned = 0.00169905 Jy ! Component: 1050 - total flux cleaned = 0.00186312 Jy ! Component: 1100 - total flux cleaned = 0.00197054 Jy ! Component: 1150 - total flux cleaned = 0.00207645 Jy ! Component: 1200 - total flux cleaned = 0.00210333 Jy ! Component: 1250 - total flux cleaned = 0.00218163 Jy ! Component: 1300 - total flux cleaned = 0.00236109 Jy ! Component: 1350 - total flux cleaned = 0.00238679 Jy ! Component: 1400 - total flux cleaned = 0.00253606 Jy ! Component: 1450 - total flux cleaned = 0.00256069 Jy ! Component: 1500 - total flux cleaned = 0.00256101 Jy ! Component: 1550 - total flux cleaned = 0.00253705 Jy ! Component: 1600 - total flux cleaned = 0.00256076 Jy ! Component: 1650 - total flux cleaned = 0.0024665 Jy ! Component: 1700 - total flux cleaned = 0.00237329 Jy ! Component: 1750 - total flux cleaned = 0.00244241 Jy ! Component: 1800 - total flux cleaned = 0.00237396 Jy ! Component: 1850 - total flux cleaned = 0.00232881 Jy ! Component: 1900 - total flux cleaned = 0.00221647 Jy ! Component: 1950 - total flux cleaned = 0.00215017 Jy ! Component: 2000 - total flux cleaned = 0.00212851 Jy ! Component: 2050 - total flux cleaned = 0.00212873 Jy ! Component: 2100 - total flux cleaned = 0.00204234 Jy ! Component: 2150 - total flux cleaned = 0.00197812 Jy ! Component: 2200 - total flux cleaned = 0.00193593 Jy ! Component: 2250 - total flux cleaned = 0.00185156 Jy ! Component: 2300 - total flux cleaned = 0.00180979 Jy ! Component: 2350 - total flux cleaned = 0.00180966 Jy ! Component: 2400 - total flux cleaned = 0.00170707 Jy ! Component: 2450 - total flux cleaned = 0.00166641 Jy ! Component: 2500 - total flux cleaned = 0.00166618 Jy ! Component: 2550 - total flux cleaned = 0.0016064 Jy ! Component: 2600 - total flux cleaned = 0.00162619 Jy ! Component: 2650 - total flux cleaned = 0.00156703 Jy ! Component: 2700 - total flux cleaned = 0.00156696 Jy ! Component: 2750 - total flux cleaned = 0.00148936 Jy ! Component: 2800 - total flux cleaned = 0.00152777 Jy ! Component: 2850 - total flux cleaned = 0.00148929 Jy ! Component: 2900 - total flux cleaned = 0.0014894 Jy ! Component: 2950 - total flux cleaned = 0.00147052 Jy ! Component: 3000 - total flux cleaned = 0.00145178 Jy ! Component: 3050 - total flux cleaned = 0.00147026 Jy ! Component: 3100 - total flux cleaned = 0.00148848 Jy ! Component: 3150 - total flux cleaned = 0.00145185 Jy ! Component: 3200 - total flux cleaned = 0.00145178 Jy ! Component: 3250 - total flux cleaned = 0.00143386 Jy ! Component: 3300 - total flux cleaned = 0.00148775 Jy ! Component: 3350 - total flux cleaned = 0.00141642 Jy ! Component: 3400 - total flux cleaned = 0.00134566 Jy ! Component: 3450 - total flux cleaned = 0.00143349 Jy ! Component: 3500 - total flux cleaned = 0.00139863 Jy ! Component: 3550 - total flux cleaned = 0.00141603 Jy ! Component: 3600 - total flux cleaned = 0.00141612 Jy ! Component: 3650 - total flux cleaned = 0.00141615 Jy ! Component: 3700 - total flux cleaned = 0.00143332 Jy ! Component: 3750 - total flux cleaned = 0.00139952 Jy ! Component: 3800 - total flux cleaned = 0.00143311 Jy ! Component: 3850 - total flux cleaned = 0.00139976 Jy ! Component: 3900 - total flux cleaned = 0.00139981 Jy ! Component: 3950 - total flux cleaned = 0.00139994 Jy ! Component: 4000 - total flux cleaned = 0.00144921 Jy ! Component: 4050 - total flux cleaned = 0.00143298 Jy ! Total flux subtracted in 4096 components = 0.00141674 Jy ! Clean residual min=-0.001015 max=0.001043 Jy/beam ! Clean residual mean=-0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.517742 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 507 components and 0.517742 Jy ![Exited script file: muppet] wmap "J0350+0506_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.483 x 7.834 at 0.2506 degrees (North through East) ! Clean map min=-0.0017195 max=0.14408 Jy/beam ! Writing clean map to FITS file: J0350+0506_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144076 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000298744 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.622057 0.622057 1.24411 2.48823 4.97646 9.95291 19.9058 39.8116 79.6233 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.483 x 7.834 at 0.2506 degrees (North through East) ! Clean map min=-0.0017195 max=0.14408 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0350+0506_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:26:57 2019