! Started logfile: J0348-2749_S_2017_10_21_pus_uvs.log on Sat May 11 20:49:40 2019 obs J0348-2749_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0348-2749_S_2017_10_21_pus_uva.fits ! AN table 1: 39 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.775641 visibilities/baseline/integration-bin. ! Found source: J0348-2749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 4356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0348-2749_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.640518Jy sigma=0.004616 ! Fit after self-cal, rms=0.611896Jy sigma=0.004354 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=17.47 mas, bpa=-12.57 degrees ! Estimated noise=2270.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.301623 Jy ! Component: 100 - total flux cleaned = 0.408392 Jy ! Total flux subtracted in 100 components = 0.408392 Jy ! Clean residual min=-0.023170 max=0.049373 Jy/beam ! Clean residual mean=-0.000476 rms=0.008871 Jy/beam ! Combined flux in latest and established models = 0.408392 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.408392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186712Jy sigma=0.001311 ! Fit after self-cal, rms=0.186396Jy sigma=0.001309 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=20.18 mas, bpa=-12.7 degrees ! Estimated noise=1785.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0858192 Jy ! Component: 100 - total flux cleaned = 0.129862 Jy ! Component: 150 - total flux cleaned = 0.157636 Jy ! Component: 200 - total flux cleaned = 0.176227 Jy ! Total flux subtracted in 200 components = 0.176227 Jy ! Clean residual min=-0.016015 max=0.021821 Jy/beam ! Clean residual mean=-0.000386 rms=0.005290 Jy/beam ! Combined flux in latest and established models = 0.584619 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 81 components and 0.584619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146543Jy sigma=0.000934 ! Fit after self-cal, rms=0.146392Jy sigma=0.000933 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.91 HN 1.18 KP 1.08 ! LA 0.98 MK 0.99 NL 0.92 OV 0.95 ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.19 KP 1.03 ! LA 0.95 MK 1.05 NL 1.08 OV 0.95 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.20 KP 1.03 ! LA 0.75 MK 1.07 NL 1.20 OV 0.87 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.18 KP 1.00* ! LA 0.91 MK 1.04 NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Fit before self-cal, rms=0.146392Jy sigma=0.000933 ! Fit after self-cal, rms=0.140341Jy sigma=0.000794 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=20.89 mas, bpa=-12.99 degrees ! Estimated noise=1815.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00606743 Jy ! Component: 100 - total flux cleaned = -0.00750679 Jy ! Component: 150 - total flux cleaned = -0.00876429 Jy ! Component: 200 - total flux cleaned = -0.00955919 Jy ! Total flux subtracted in 200 components = -0.00955919 Jy ! Clean residual min=-0.010240 max=0.012670 Jy/beam ! Clean residual mean=-0.000078 rms=0.003080 Jy/beam ! Combined flux in latest and established models = 0.57506 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.57506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139608Jy sigma=0.000790 ! Fit after self-cal, rms=0.139718Jy sigma=0.000789 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139718Jy sigma=0.000789 ! Fit after self-cal, rms=0.140765Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=21.04 mas, bpa=-13.08 degrees ! Estimated noise=1821.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00460522 Jy ! Component: 100 - total flux cleaned = -0.00573979 Jy ! Component: 150 - total flux cleaned = -0.00672406 Jy ! Component: 200 - total flux cleaned = -0.00748274 Jy ! Total flux subtracted in 200 components = -0.00748274 Jy ! Clean residual min=-0.009080 max=0.011425 Jy/beam ! Clean residual mean=-0.000079 rms=0.002848 Jy/beam ! Combined flux in latest and established models = 0.567577 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.567577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140293Jy sigma=0.000775 ! Fit after self-cal, rms=0.140310Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000838856 Jy ! Component: 100 - total flux cleaned = -0.00145838 Jy ! Component: 150 - total flux cleaned = -0.00202732 Jy ! Component: 200 - total flux cleaned = -0.00254653 Jy ! Total flux subtracted in 200 components = -0.00254653 Jy ! Clean residual min=-0.009044 max=0.011455 Jy/beam ! Clean residual mean=-0.000089 rms=0.002845 Jy/beam ! Combined flux in latest and established models = 0.565031 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 120 components and 0.565031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140162Jy sigma=0.000774 ! Fit after self-cal, rms=0.140153Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140153Jy sigma=0.000774 ! Fit after self-cal, rms=0.139917Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=21.19 mas, bpa=-13.17 degrees ! Estimated noise=1826.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266796 Jy ! Component: 100 - total flux cleaned = -0.00332218 Jy ! Component: 150 - total flux cleaned = -0.00387084 Jy ! Component: 200 - total flux cleaned = -0.00434742 Jy ! Total flux subtracted in 200 components = -0.00434742 Jy ! Clean residual min=-0.006951 max=0.011509 Jy/beam ! Clean residual mean=-0.000122 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.560683 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 127 components and 0.560683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139749Jy sigma=0.000720 ! Fit after self-cal, rms=0.139870Jy sigma=0.000720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102924 Jy ! Component: 100 - total flux cleaned = 0.0153999 Jy ! Component: 150 - total flux cleaned = 0.0189824 Jy ! Component: 200 - total flux cleaned = 0.0209358 Jy ! Total flux subtracted in 200 components = 0.0209358 Jy ! Clean residual min=-0.005461 max=0.006034 Jy/beam ! Clean residual mean=-0.000036 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.581619 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 172 components and 0.581619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139093Jy sigma=0.000712 ! Fit after self-cal, rms=0.139095Jy sigma=0.000711 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139095Jy sigma=0.000711 ! Fit after self-cal, rms=0.140782Jy sigma=0.000710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.644 mas, bmaj=30.62 mas, bpa=-1.093 degrees ! Estimated noise=2012.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422028 Jy ! Component: 100 - total flux cleaned = 0.00555193 Jy ! Component: 150 - total flux cleaned = 0.00636101 Jy ! Component: 200 - total flux cleaned = 0.00699639 Jy ! Total flux subtracted in 200 components = 0.00699639 Jy ! Clean residual min=-0.004540 max=0.005513 Jy/beam ! Clean residual mean=-0.000058 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.588616 Jy selfcal ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 235 components and 0.588616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140626Jy sigma=0.000708 ! Fit after self-cal, rms=0.140620Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158862 Jy ! Component: 100 - total flux cleaned = 0.00197147 Jy ! Component: 150 - total flux cleaned = 0.00218999 Jy ! Component: 200 - total flux cleaned = 0.00233741 Jy ! Total flux subtracted in 200 components = 0.00233741 Jy ! Clean residual min=-0.004308 max=0.005372 Jy/beam ! Clean residual mean=-0.000042 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.590953 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 273 components and 0.590953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140544Jy sigma=0.000708 ! Fit after self-cal, rms=0.140539Jy sigma=0.000708 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=21.24 mas, bpa=-13.18 degrees ! Estimated noise=1825.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.634 x 21.24 at -13.18 degrees (North through East) ! Clean map min=-0.0046903 max=0.43008 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=18.37 mas, bpa=-13.22 degrees ! Estimated noise=2387.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.32196 Jy ! Component: 100 - total flux cleaned = 0.427427 Jy ! Component: 150 - total flux cleaned = 0.478703 Jy ! Component: 200 - total flux cleaned = 0.505312 Jy ! Total flux subtracted in 200 components = 0.505312 Jy ! Clean residual min=-0.008741 max=0.013235 Jy/beam ! Clean residual mean=-0.000192 rms=0.002878 Jy/beam ! Combined flux in latest and established models = 0.505312 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.505312 Jy ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=21.24 mas, bpa=-13.18 degrees ! Estimated noise=1825.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225854 Jy ! Component: 100 - total flux cleaned = 0.0370031 Jy ! Component: 150 - total flux cleaned = 0.0471085 Jy ! Component: 200 - total flux cleaned = 0.054936 Jy ! Total flux subtracted in 200 components = 0.054936 Jy ! Clean residual min=-0.005226 max=0.006449 Jy/beam ! Clean residual mean=-0.000153 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.560248 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 77 components and 0.560248 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.644 mas, bmaj=30.62 mas, bpa=-1.093 degrees ! Estimated noise=2012.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795465 Jy ! Component: 100 - total flux cleaned = 0.013573 Jy ! Component: 150 - total flux cleaned = 0.0177046 Jy ! Component: 200 - total flux cleaned = 0.0208535 Jy ! Total flux subtracted in 200 components = 0.0208535 Jy ! Clean residual min=-0.004541 max=0.004743 Jy/beam ! Clean residual mean=-0.000106 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.581102 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249642 Jy ! Component: 100 - total flux cleaned = 0.00448779 Jy ! Component: 150 - total flux cleaned = 0.00607964 Jy ! Component: 200 - total flux cleaned = 0.00735424 Jy ! Total flux subtracted in 200 components = 0.00735424 Jy ! Clean residual min=-0.004104 max=0.004837 Jy/beam ! Clean residual mean=-0.000056 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.588456 Jy ! Adding 107 model components to the UV plane model. ! The established model now contains 175 components and 0.588456 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=21.24 mas, bpa=-13.18 degrees ! Estimated noise=1825.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052783 Jy ! Component: 100 - total flux cleaned = 0.000901025 Jy ! Component: 150 - total flux cleaned = 0.000981395 Jy ! Component: 200 - total flux cleaned = 0.0011318 Jy ! Total flux subtracted in 200 components = 0.0011318 Jy ! Clean residual min=-0.004507 max=0.005031 Jy/beam ! Clean residual mean=-0.000027 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.589588 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 194 components and 0.589588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140655Jy sigma=0.000707 ! Fit after self-cal, rms=0.140588Jy sigma=0.000707 wmodel J0348-2749_S_2017_10_21_pus_map.mod ! Writing 194 model components to file: J0348-2749_S_2017_10_21_pus_map.mod wobs J0348-2749_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0348-2749_S_2017_10_21_pus_uvs.fits wwins J0348-2749_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J0348-2749_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.48613e-05 Jy ! Component: 100 - total flux cleaned = 2.68999e-05 Jy ! Component: 150 - total flux cleaned = 9.87613e-05 Jy ! Component: 200 - total flux cleaned = 0.00016915 Jy ! Component: 250 - total flux cleaned = 0.000236884 Jy ! Component: 300 - total flux cleaned = -2.05505e-05 Jy ! Component: 350 - total flux cleaned = -0.000205876 Jy ! Component: 400 - total flux cleaned = -0.000569371 Jy ! Component: 450 - total flux cleaned = -0.000923001 Jy ! Component: 500 - total flux cleaned = -0.0012108 Jy ! Component: 550 - total flux cleaned = -0.00137896 Jy ! Component: 600 - total flux cleaned = -0.00176149 Jy ! Component: 650 - total flux cleaned = -0.00170654 Jy ! Component: 700 - total flux cleaned = -0.00191648 Jy ! Component: 750 - total flux cleaned = -0.00186544 Jy ! Component: 800 - total flux cleaned = -0.00186595 Jy ! Component: 850 - total flux cleaned = -0.00211494 Jy ! Component: 900 - total flux cleaned = -0.00235961 Jy ! Component: 950 - total flux cleaned = -0.00255223 Jy ! Component: 1000 - total flux cleaned = -0.0027898 Jy ! Component: 1050 - total flux cleaned = -0.00307106 Jy ! Component: 1100 - total flux cleaned = -0.00325683 Jy ! Component: 1150 - total flux cleaned = -0.00353123 Jy ! Component: 1200 - total flux cleaned = -0.00375631 Jy ! Component: 1250 - total flux cleaned = -0.00402245 Jy ! Component: 1300 - total flux cleaned = -0.00415367 Jy ! Component: 1350 - total flux cleaned = -0.00419722 Jy ! Component: 1400 - total flux cleaned = -0.00445448 Jy ! Component: 1450 - total flux cleaned = -0.00470832 Jy ! Component: 1500 - total flux cleaned = -0.00487547 Jy ! Component: 1550 - total flux cleaned = -0.00500022 Jy ! Component: 1600 - total flux cleaned = -0.005165 Jy ! Component: 1650 - total flux cleaned = -0.00549115 Jy ! Component: 1700 - total flux cleaned = -0.00553116 Jy ! Component: 1750 - total flux cleaned = -0.00565149 Jy ! Component: 1800 - total flux cleaned = -0.00592863 Jy ! Component: 1850 - total flux cleaned = -0.00592848 Jy ! Component: 1900 - total flux cleaned = -0.00616195 Jy ! Component: 1950 - total flux cleaned = -0.00631605 Jy ! Component: 2000 - total flux cleaned = -0.00643087 Jy ! Component: 2050 - total flux cleaned = -0.00650696 Jy ! Component: 2100 - total flux cleaned = -0.00658249 Jy ! Component: 2150 - total flux cleaned = -0.00684356 Jy ! Component: 2200 - total flux cleaned = -0.00695476 Jy ! Component: 2250 - total flux cleaned = -0.00710197 Jy ! Component: 2300 - total flux cleaned = -0.00732095 Jy ! Component: 2350 - total flux cleaned = -0.00728469 Jy ! Component: 2400 - total flux cleaned = -0.00746489 Jy ! Component: 2450 - total flux cleaned = -0.00760773 Jy ! Component: 2500 - total flux cleaned = -0.00774944 Jy ! Component: 2550 - total flux cleaned = -0.00785491 Jy ! Component: 2600 - total flux cleaned = -0.00799443 Jy ! Component: 2650 - total flux cleaned = -0.00802896 Jy ! Component: 2700 - total flux cleaned = -0.0082017 Jy ! Component: 2750 - total flux cleaned = -0.00830413 Jy ! Component: 2800 - total flux cleaned = -0.00827033 Jy ! Component: 2850 - total flux cleaned = -0.00840567 Jy ! Component: 2900 - total flux cleaned = -0.00853992 Jy ! Component: 2950 - total flux cleaned = -0.0084063 Jy ! Component: 3000 - total flux cleaned = -0.0087385 Jy ! Component: 3050 - total flux cleaned = -0.00863947 Jy ! Component: 3100 - total flux cleaned = -0.00877095 Jy ! Component: 3150 - total flux cleaned = -0.00883622 Jy ! Component: 3200 - total flux cleaned = -0.00890102 Jy ! Component: 3250 - total flux cleaned = -0.00902968 Jy ! Component: 3300 - total flux cleaned = -0.0090618 Jy ! Component: 3350 - total flux cleaned = -0.0091255 Jy ! Component: 3400 - total flux cleaned = -0.00912518 Jy ! Component: 3450 - total flux cleaned = -0.00928251 Jy ! Component: 3500 - total flux cleaned = -0.009251 Jy ! Component: 3550 - total flux cleaned = -0.00956256 Jy ! Component: 3600 - total flux cleaned = -0.00962434 Jy ! Component: 3650 - total flux cleaned = -0.00971689 Jy ! Component: 3700 - total flux cleaned = -0.00977833 Jy ! Component: 3750 - total flux cleaned = -0.00986985 Jy ! Component: 3800 - total flux cleaned = -0.00999113 Jy ! Component: 3850 - total flux cleaned = -0.0100516 Jy ! Component: 3900 - total flux cleaned = -0.0101116 Jy ! Component: 3950 - total flux cleaned = -0.0101414 Jy ! Component: 4000 - total flux cleaned = -0.0102604 Jy ! Component: 4050 - total flux cleaned = -0.01029 Jy ! Total flux subtracted in 4096 components = -0.0103782 Jy ! Clean residual min=-0.001593 max=0.001534 Jy/beam ! Clean residual mean=-0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.57921 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 503 components and 0.57921 Jy ![Exited script file: muppet] wmap "J0348-2749_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.634 x 21.24 at -13.18 degrees (North through East) ! Clean map min=-0.0042302 max=0.43512 Jy/beam ! Writing clean map to FITS file: J0348-2749_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.435121 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000573602 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.395478 0.395478 0.790956 1.58191 3.16382 6.32765 12.6553 25.3106 50.6212 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.435 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.634 x 21.24 at -13.18 degrees (North through East) ! Clean map min=-0.0042302 max=0.43512 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0348-2749_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:49:45 2019