! Started logfile: J0348-2749_S_2017_08_12_pus_uvs.log on Fri May 10 14:51:47 2019 obs J0348-2749_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0348-2749_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.42735 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0348-2749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0348-2749_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.645773Jy sigma=0.004220 ! Fit after self-cal, rms=0.610181Jy sigma=0.004011 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=13.34 mas, bpa=0.1689 degrees ! Estimated noise=5608.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.29618 Jy ! Component: 100 - total flux cleaned = 0.395964 Jy ! Total flux subtracted in 100 components = 0.395964 Jy ! Clean residual min=-0.026586 max=0.048967 Jy/beam ! Clean residual mean=0.000009 rms=0.012414 Jy/beam ! Combined flux in latest and established models = 0.395964 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.395964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146975Jy sigma=0.000957 ! Fit after self-cal, rms=0.146654Jy sigma=0.000955 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=14.5 mas, bpa=2.118 degrees ! Estimated noise=4433.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0769638 Jy ! Component: 100 - total flux cleaned = 0.114786 Jy ! Component: 150 - total flux cleaned = 0.135158 Jy ! Component: 200 - total flux cleaned = 0.146634 Jy ! Total flux subtracted in 200 components = 0.146634 Jy ! Clean residual min=-0.013769 max=0.013946 Jy/beam ! Clean residual mean=0.000041 rms=0.004281 Jy/beam ! Combined flux in latest and established models = 0.542598 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 67 components and 0.542598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104831Jy sigma=0.000659 ! Fit after self-cal, rms=0.104729Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.05 ! LA 0.96 MK 1.00* NL 1.00* OV 1.05 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.03 ! LA 0.94 MK 1.00* NL 1.00* OV 1.06 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.07 KP 0.97 ! LA 0.95 MK 1.00* NL 1.01 OV 0.94 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.104729Jy sigma=0.000659 ! Fit after self-cal, rms=0.101711Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=14.62 mas, bpa=2.184 degrees ! Estimated noise=4398.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482681 Jy ! Component: 100 - total flux cleaned = 0.000338809 Jy ! Component: 150 - total flux cleaned = 0.00029908 Jy ! Component: 200 - total flux cleaned = 0.000300199 Jy ! Total flux subtracted in 200 components = 0.000300199 Jy ! Clean residual min=-0.009626 max=0.012938 Jy/beam ! Clean residual mean=0.000000 rms=0.003161 Jy/beam ! Combined flux in latest and established models = 0.542898 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.542898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101663Jy sigma=0.000639 ! Fit after self-cal, rms=0.101718Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101718Jy sigma=0.000639 ! Fit after self-cal, rms=0.101736Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=14.62 mas, bpa=2.201 degrees ! Estimated noise=4397.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134228 Jy ! Component: 100 - total flux cleaned = 0.000210736 Jy ! Component: 150 - total flux cleaned = 0.000244608 Jy ! Component: 200 - total flux cleaned = 0.000274648 Jy ! Total flux subtracted in 200 components = 0.000274648 Jy ! Clean residual min=-0.009654 max=0.012851 Jy/beam ! Clean residual mean=0.000000 rms=0.003144 Jy/beam ! Combined flux in latest and established models = 0.543173 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.543173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101709Jy sigma=0.000638 ! Fit after self-cal, rms=0.101707Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.64123e-05 Jy ! Component: 100 - total flux cleaned = -1.21657e-05 Jy ! Component: 150 - total flux cleaned = 1.78306e-05 Jy ! Component: 200 - total flux cleaned = 1.76671e-05 Jy ! Total flux subtracted in 200 components = 1.76671e-05 Jy ! Clean residual min=-0.009695 max=0.012830 Jy/beam ! Clean residual mean=0.000000 rms=0.003140 Jy/beam ! Combined flux in latest and established models = 0.543191 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.543191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101687Jy sigma=0.000638 ! Fit after self-cal, rms=0.101688Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101688Jy sigma=0.000638 ! Fit after self-cal, rms=0.101664Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=14.62 mas, bpa=2.22 degrees ! Estimated noise=4394.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143431 Jy ! Component: 100 - total flux cleaned = 0.000176456 Jy ! Component: 150 - total flux cleaned = 0.000204785 Jy ! Component: 200 - total flux cleaned = 0.000231858 Jy ! Total flux subtracted in 200 components = 0.000231858 Jy ! Clean residual min=-0.009646 max=0.012792 Jy/beam ! Clean residual mean=0.000000 rms=0.003129 Jy/beam ! Combined flux in latest and established models = 0.543423 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.543423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101644Jy sigma=0.000638 ! Fit after self-cal, rms=0.101645Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.20443e-05 Jy ! Component: 100 - total flux cleaned = 1.56543e-05 Jy ! Component: 150 - total flux cleaned = 1.54408e-05 Jy ! Component: 200 - total flux cleaned = 4.08408e-05 Jy ! Total flux subtracted in 200 components = 4.08408e-05 Jy ! Clean residual min=-0.009632 max=0.012756 Jy/beam ! Clean residual mean=0.000000 rms=0.003125 Jy/beam ! Combined flux in latest and established models = 0.543463 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 91 components and 0.543463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101630Jy sigma=0.000638 ! Fit after self-cal, rms=0.101631Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101631Jy sigma=0.000638 ! Fit after self-cal, rms=0.101605Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.74 mas, bmaj=19.23 mas, bpa=-4.779 degrees ! Estimated noise=5525.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100582 Jy ! Component: 100 - total flux cleaned = 0.000963243 Jy ! Component: 150 - total flux cleaned = 0.000925329 Jy ! Component: 200 - total flux cleaned = 0.00095737 Jy ! Total flux subtracted in 200 components = 0.00095737 Jy ! Clean residual min=-0.013709 max=0.015091 Jy/beam ! Clean residual mean=0.000002 rms=0.004788 Jy/beam ! Combined flux in latest and established models = 0.544421 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 96 components and 0.544421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101653Jy sigma=0.000638 ! Fit after self-cal, rms=0.101617Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.55987e-06 Jy ! Component: 100 - total flux cleaned = -4.85582e-06 Jy ! Component: 150 - total flux cleaned = -6.39645e-06 Jy ! Component: 200 - total flux cleaned = 1.85427e-05 Jy ! Total flux subtracted in 200 components = 1.85427e-05 Jy ! Clean residual min=-0.013789 max=0.015023 Jy/beam ! Clean residual mean=0.000002 rms=0.004773 Jy/beam ! Combined flux in latest and established models = 0.544439 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 102 components and 0.544439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101680Jy sigma=0.000638 ! Fit after self-cal, rms=0.101650Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=14.63 mas, bpa=2.24 degrees ! Estimated noise=4392.43 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.564 x 14.63 at 2.24 degrees (North through East) ! Clean map min=-0.0097206 max=0.40463 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=13.4 mas, bpa=0.2969 degrees ! Estimated noise=5596.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.295302 Jy ! Component: 100 - total flux cleaned = 0.394149 Jy ! Component: 150 - total flux cleaned = 0.449997 Jy ! Component: 200 - total flux cleaned = 0.483575 Jy ! Total flux subtracted in 200 components = 0.483575 Jy ! Clean residual min=-0.014042 max=0.020211 Jy/beam ! Clean residual mean=-0.000002 rms=0.005382 Jy/beam ! Combined flux in latest and established models = 0.483575 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.483575 Jy ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=14.63 mas, bpa=2.24 degrees ! Estimated noise=4392.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0278596 Jy ! Component: 100 - total flux cleaned = 0.0429077 Jy ! Component: 150 - total flux cleaned = 0.051473 Jy ! Component: 200 - total flux cleaned = 0.056371 Jy ! Total flux subtracted in 200 components = 0.056371 Jy ! Clean residual min=-0.010601 max=0.011024 Jy/beam ! Clean residual mean=0.000000 rms=0.003203 Jy/beam ! Combined flux in latest and established models = 0.539946 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 70 components and 0.539946 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.74 mas, bmaj=19.23 mas, bpa=-4.779 degrees ! Estimated noise=5525.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413005 Jy ! Component: 100 - total flux cleaned = 0.00447451 Jy ! Component: 150 - total flux cleaned = 0.00464538 Jy ! Component: 200 - total flux cleaned = 0.00483799 Jy ! Total flux subtracted in 200 components = 0.00483799 Jy ! Clean residual min=-0.013856 max=0.014532 Jy/beam ! Clean residual mean=0.000002 rms=0.004785 Jy/beam ! Combined flux in latest and established models = 0.544784 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.19026e-05 Jy ! Component: 100 - total flux cleaned = 0.000167539 Jy ! Component: 150 - total flux cleaned = 0.000167159 Jy ! Component: 200 - total flux cleaned = 0.000167951 Jy ! Total flux subtracted in 200 components = 0.000167951 Jy ! Clean residual min=-0.013832 max=0.014604 Jy/beam ! Clean residual mean=0.000002 rms=0.004763 Jy/beam ! Combined flux in latest and established models = 0.544952 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 87 components and 0.544952 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=14.63 mas, bpa=2.24 degrees ! Estimated noise=4392.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113297 Jy ! Component: 100 - total flux cleaned = -0.000132524 Jy ! Component: 150 - total flux cleaned = -0.000133398 Jy ! Component: 200 - total flux cleaned = -0.00013208 Jy ! Total flux subtracted in 200 components = -0.00013208 Jy ! Clean residual min=-0.009673 max=0.011493 Jy/beam ! Clean residual mean=0.000000 rms=0.003068 Jy/beam ! Combined flux in latest and established models = 0.54482 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 97 components and 0.54482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101595Jy sigma=0.000638 ! Fit after self-cal, rms=0.101579Jy sigma=0.000638 wmodel J0348-2749_S_2017_08_12_pus_map.mod ! Writing 97 model components to file: J0348-2749_S_2017_08_12_pus_map.mod wobs J0348-2749_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0348-2749_S_2017_08_12_pus_uvs.fits wwins J0348-2749_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0348-2749_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279279 Jy ! Component: 100 - total flux cleaned = 0.00393 Jy ! Component: 150 - total flux cleaned = 0.0040969 Jy ! Component: 200 - total flux cleaned = 0.00321708 Jy ! Component: 250 - total flux cleaned = 0.00206502 Jy ! Component: 300 - total flux cleaned = 0.00089509 Jy ! Component: 350 - total flux cleaned = -0.000185124 Jy ! Component: 400 - total flux cleaned = -0.00129283 Jy ! Component: 450 - total flux cleaned = -0.00215843 Jy ! Component: 500 - total flux cleaned = -0.00304741 Jy ! Component: 550 - total flux cleaned = -0.00373504 Jy ! Component: 600 - total flux cleaned = -0.00446452 Jy ! Component: 650 - total flux cleaned = -0.00523223 Jy ! Component: 700 - total flux cleaned = -0.00569977 Jy ! Component: 750 - total flux cleaned = -0.00641272 Jy ! Component: 800 - total flux cleaned = -0.00678921 Jy ! Component: 850 - total flux cleaned = -0.00703598 Jy ! Component: 900 - total flux cleaned = -0.00709729 Jy ! Component: 950 - total flux cleaned = -0.00727615 Jy ! Component: 1000 - total flux cleaned = -0.00739371 Jy ! Component: 1050 - total flux cleaned = -0.00739435 Jy ! Component: 1100 - total flux cleaned = -0.00756826 Jy ! Component: 1150 - total flux cleaned = -0.00762623 Jy ! Component: 1200 - total flux cleaned = -0.00774159 Jy ! Component: 1250 - total flux cleaned = -0.00785535 Jy ! Component: 1300 - total flux cleaned = -0.00785523 Jy ! Component: 1350 - total flux cleaned = -0.00791211 Jy ! Component: 1400 - total flux cleaned = -0.0080833 Jy ! Component: 1450 - total flux cleaned = -0.00808358 Jy ! Component: 1500 - total flux cleaned = -0.00831494 Jy ! Component: 1550 - total flux cleaned = -0.00848967 Jy ! Component: 1600 - total flux cleaned = -0.00849061 Jy ! Component: 1650 - total flux cleaned = -0.00854925 Jy ! Component: 1700 - total flux cleaned = -0.00860861 Jy ! Component: 1750 - total flux cleaned = -0.00860806 Jy ! Component: 1800 - total flux cleaned = -0.00860771 Jy ! Component: 1850 - total flux cleaned = -0.00854531 Jy ! Component: 1900 - total flux cleaned = -0.00841786 Jy ! Component: 1950 - total flux cleaned = -0.00835225 Jy ! Component: 2000 - total flux cleaned = -0.00828552 Jy ! Component: 2050 - total flux cleaned = -0.00828466 Jy ! Component: 2100 - total flux cleaned = -0.00814696 Jy ! Component: 2150 - total flux cleaned = -0.00800712 Jy ! Component: 2200 - total flux cleaned = -0.00786449 Jy ! Component: 2250 - total flux cleaned = -0.00779161 Jy ! Component: 2300 - total flux cleaned = -0.00764417 Jy ! Component: 2350 - total flux cleaned = -0.00756873 Jy ! Component: 2400 - total flux cleaned = -0.00757003 Jy ! Component: 2450 - total flux cleaned = -0.00749191 Jy ! Component: 2500 - total flux cleaned = -0.00757226 Jy ! Component: 2550 - total flux cleaned = -0.0074896 Jy ! Component: 2600 - total flux cleaned = -0.00740668 Jy ! Component: 2650 - total flux cleaned = -0.00740641 Jy ! Component: 2700 - total flux cleaned = -0.00740587 Jy ! Component: 2750 - total flux cleaned = -0.00749452 Jy ! Component: 2800 - total flux cleaned = -0.00749484 Jy ! Component: 2850 - total flux cleaned = -0.00749417 Jy ! Component: 2900 - total flux cleaned = -0.00758961 Jy ! Component: 2950 - total flux cleaned = -0.00758971 Jy ! Component: 3000 - total flux cleaned = -0.00778922 Jy ! Component: 3050 - total flux cleaned = -0.00778775 Jy ! Component: 3100 - total flux cleaned = -0.0077873 Jy ! Component: 3150 - total flux cleaned = -0.00778787 Jy ! Component: 3200 - total flux cleaned = -0.00767977 Jy ! Component: 3250 - total flux cleaned = -0.00767938 Jy ! Component: 3300 - total flux cleaned = -0.00745237 Jy ! Component: 3350 - total flux cleaned = -0.0074504 Jy ! Component: 3400 - total flux cleaned = -0.00744876 Jy ! Component: 3450 - total flux cleaned = -0.00744787 Jy ! Component: 3500 - total flux cleaned = -0.00732084 Jy ! Component: 3550 - total flux cleaned = -0.0073182 Jy ! Component: 3600 - total flux cleaned = -0.00731712 Jy ! Component: 3650 - total flux cleaned = -0.00745294 Jy ! Component: 3700 - total flux cleaned = -0.00731317 Jy ! Component: 3750 - total flux cleaned = -0.00716868 Jy ! Component: 3800 - total flux cleaned = -0.00731358 Jy ! Component: 3850 - total flux cleaned = -0.00716425 Jy ! Component: 3900 - total flux cleaned = -0.00715998 Jy ! Component: 3950 - total flux cleaned = -0.00731903 Jy ! Component: 4000 - total flux cleaned = -0.00732073 Jy ! Component: 4050 - total flux cleaned = -0.00732311 Jy ! Total flux subtracted in 4096 components = -0.00732396 Jy ! Clean residual min=-0.010583 max=0.010293 Jy/beam ! Clean residual mean=0.000026 rms=0.002751 Jy/beam ! Combined flux in latest and established models = 0.537496 Jy keep ! Adding 171 model components to the UV plane model. ! The established model now contains 268 components and 0.537496 Jy ![Exited script file: muppet] wmap "J0348-2749_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.564 x 14.63 at 2.24 degrees (North through East) ! Clean map min=-0.020425 max=0.39826 Jy/beam ! Writing clean map to FITS file: J0348-2749_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.398263 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00332544 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.50496 2.50496 5.00992 10.0198 20.0397 40.0793 80.1587 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0099 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.398 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.564 x 14.63 at 2.24 degrees (North through East) ! Clean map min=-0.020425 max=0.39826 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0348-2749_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:51:51 2019