! Started logfile: J0348-2749_S_2017_08_05_pus_uvs.log on Thu May 9 19:19:53 2019 obs J0348-2749_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0348-2749_S_2017_08_05_pus_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.334568 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0348-2749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 2168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0348-2749_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 309 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.558962Jy sigma=0.003778 ! Fit after self-cal, rms=0.535840Jy sigma=0.003637 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=15.4 mas, bpa=0.08556 degrees ! Estimated noise=3950.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.344662 Jy ! Component: 100 - total flux cleaned = 0.451456 Jy ! Total flux subtracted in 100 components = 0.451456 Jy ! Clean residual min=-0.023922 max=0.051046 Jy/beam ! Clean residual mean=0.001999 rms=0.009824 Jy/beam ! Combined flux in latest and established models = 0.451456 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.451456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181100Jy sigma=0.001098 ! Fit after self-cal, rms=0.180917Jy sigma=0.001097 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=16.74 mas, bpa=0.0463 degrees ! Estimated noise=2804.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0845078 Jy ! Component: 100 - total flux cleaned = 0.124945 Jy ! Component: 150 - total flux cleaned = 0.150119 Jy ! Component: 200 - total flux cleaned = 0.166884 Jy ! Total flux subtracted in 200 components = 0.166884 Jy ! Clean residual min=-0.015796 max=0.025487 Jy/beam ! Clean residual mean=0.002034 rms=0.006158 Jy/beam ! Combined flux in latest and established models = 0.61834 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 82 components and 0.61834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134959Jy sigma=0.000814 ! Fit after self-cal, rms=0.134763Jy sigma=0.000813 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.03 KP 1.03 ! LA 0.97 MK 1.01 NL 0.93 OV 0.97 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.06 KP 0.99 ! LA 0.94 MK 1.00 NL 1.06 OV 1.06 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.08 KP 0.86 ! LA 0.76 MK 1.03 NL 1.26 OV 0.92 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.134763Jy sigma=0.000813 ! Fit after self-cal, rms=0.113874Jy sigma=0.000717 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.965 mas, bmaj=16.95 mas, bpa=0.6336 degrees ! Estimated noise=2823.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00280311 Jy ! Component: 100 - total flux cleaned = -0.00323816 Jy ! Component: 150 - total flux cleaned = -0.00343171 Jy ! Component: 200 - total flux cleaned = -0.00366111 Jy ! Total flux subtracted in 200 components = -0.00366111 Jy ! Clean residual min=-0.016478 max=0.015639 Jy/beam ! Clean residual mean=0.001090 rms=0.004128 Jy/beam ! Combined flux in latest and established models = 0.614679 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 108 components and 0.614679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113479Jy sigma=0.000715 ! Fit after self-cal, rms=0.113458Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113458Jy sigma=0.000715 ! Fit after self-cal, rms=0.107346Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=17.01 mas, bpa=0.6476 degrees ! Estimated noise=2827.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00454308 Jy ! Component: 100 - total flux cleaned = -0.00620736 Jy ! Component: 150 - total flux cleaned = -0.00661471 Jy ! Component: 200 - total flux cleaned = -0.00708094 Jy ! Total flux subtracted in 200 components = -0.00708094 Jy ! Clean residual min=-0.008145 max=0.009108 Jy/beam ! Clean residual mean=0.000569 rms=0.002313 Jy/beam ! Combined flux in latest and established models = 0.607598 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 123 components and 0.607598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107034Jy sigma=0.000669 ! Fit after self-cal, rms=0.107132Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000681608 Jy ! Component: 100 - total flux cleaned = -0.000912512 Jy ! Component: 150 - total flux cleaned = -0.00120048 Jy ! Component: 200 - total flux cleaned = -0.00153131 Jy ! Total flux subtracted in 200 components = -0.00153131 Jy ! Clean residual min=-0.007833 max=0.009247 Jy/beam ! Clean residual mean=0.000603 rms=0.002290 Jy/beam ! Combined flux in latest and established models = 0.606067 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.606067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107012Jy sigma=0.000668 ! Fit after self-cal, rms=0.107006Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107006Jy sigma=0.000668 ! Fit after self-cal, rms=0.105812Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=17.04 mas, bpa=0.6644 degrees ! Estimated noise=2824.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00336825 Jy ! Component: 100 - total flux cleaned = -0.00447243 Jy ! Component: 150 - total flux cleaned = -0.00494592 Jy ! Component: 200 - total flux cleaned = -0.00530146 Jy ! Total flux subtracted in 200 components = -0.00530146 Jy ! Clean residual min=-0.006194 max=0.009201 Jy/beam ! Clean residual mean=0.000653 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 0.600765 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 135 components and 0.600765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105626Jy sigma=0.000657 ! Fit after self-cal, rms=0.105645Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (62, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00736412 Jy ! Component: 100 - total flux cleaned = 0.00841168 Jy ! Component: 150 - total flux cleaned = 0.00900778 Jy ! Component: 200 - total flux cleaned = 0.00953077 Jy ! Total flux subtracted in 200 components = 0.00953077 Jy ! Clean residual min=-0.005203 max=0.006614 Jy/beam ! Clean residual mean=0.000444 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.610296 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 169 components and 0.610296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104929Jy sigma=0.000653 ! Fit after self-cal, rms=0.104886Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104886Jy sigma=0.000653 ! Fit after self-cal, rms=0.104716Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=20.02 mas, bpa=-0.1072 degrees ! Estimated noise=3426.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123923 Jy ! Component: 100 - total flux cleaned = 0.00103859 Jy ! Component: 150 - total flux cleaned = 0.00033312 Jy ! Component: 200 - total flux cleaned = -0.000101095 Jy ! Total flux subtracted in 200 components = -0.000101095 Jy ! Clean residual min=-0.006129 max=0.006546 Jy/beam ! Clean residual mean=0.000692 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 0.610195 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 202 components and 0.610195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104513Jy sigma=0.000651 ! Fit after self-cal, rms=0.104505Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000369813 Jy ! Component: 100 - total flux cleaned = -0.00037022 Jy ! Component: 150 - total flux cleaned = -0.000309153 Jy ! Component: 200 - total flux cleaned = -0.000308282 Jy ! Total flux subtracted in 200 components = -0.000308282 Jy ! Clean residual min=-0.005880 max=0.006482 Jy/beam ! Clean residual mean=0.000705 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 0.609887 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 217 components and 0.609887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104436Jy sigma=0.000651 ! Fit after self-cal, rms=0.104431Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.976 mas, bmaj=17.07 mas, bpa=0.6704 degrees ! Estimated noise=2816.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.976 x 17.07 at 0.6704 degrees (North through East) ! Clean map min=-0.0066002 max=0.47407 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=15.5 mas, bpa=0.685 degrees ! Estimated noise=4038.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.347851 Jy ! Component: 100 - total flux cleaned = 0.456354 Jy ! Component: 150 - total flux cleaned = 0.513347 Jy ! Component: 200 - total flux cleaned = 0.544023 Jy ! Total flux subtracted in 200 components = 0.544023 Jy ! Clean residual min=-0.012230 max=0.014670 Jy/beam ! Clean residual mean=0.000705 rms=0.003566 Jy/beam ! Combined flux in latest and established models = 0.544023 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.544023 Jy ! Inverting map and beam ! Estimated beam: bmin=3.976 mas, bmaj=17.07 mas, bpa=0.6704 degrees ! Estimated noise=2816.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235926 Jy ! Component: 100 - total flux cleaned = 0.0359327 Jy ! Component: 150 - total flux cleaned = 0.0440197 Jy ! Component: 200 - total flux cleaned = 0.0490232 Jy ! Total flux subtracted in 200 components = 0.0490232 Jy ! Clean residual min=-0.005728 max=0.007666 Jy/beam ! Clean residual mean=0.000770 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.593046 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 64 components and 0.593046 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=20.02 mas, bpa=-0.1072 degrees ! Estimated noise=3426.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664173 Jy ! Component: 100 - total flux cleaned = 0.00811605 Jy ! Component: 150 - total flux cleaned = 0.00915633 Jy ! Component: 200 - total flux cleaned = 0.0101796 Jy ! Total flux subtracted in 200 components = 0.0101796 Jy ! Clean residual min=-0.005706 max=0.007830 Jy/beam ! Clean residual mean=0.000967 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 0.603226 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737954 Jy ! Component: 100 - total flux cleaned = 0.00148146 Jy ! Component: 150 - total flux cleaned = 0.00194695 Jy ! Component: 200 - total flux cleaned = 0.0024355 Jy ! Total flux subtracted in 200 components = 0.0024355 Jy ! Clean residual min=-0.005099 max=0.007270 Jy/beam ! Clean residual mean=0.000871 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.605661 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 130 components and 0.605661 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.976 mas, bmaj=17.07 mas, bpa=0.6704 degrees ! Estimated noise=2816.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166192 Jy ! Component: 100 - total flux cleaned = 0.00191367 Jy ! Component: 150 - total flux cleaned = 0.00206336 Jy ! Component: 200 - total flux cleaned = 0.00219832 Jy ! Total flux subtracted in 200 components = 0.00219832 Jy ! Clean residual min=-0.004306 max=0.005793 Jy/beam ! Clean residual mean=0.000440 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.60786 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 151 components and 0.60786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104330Jy sigma=0.000650 ! Fit after self-cal, rms=0.104306Jy sigma=0.000650 wmodel J0348-2749_S_2017_08_05_pus_map.mod ! Writing 151 model components to file: J0348-2749_S_2017_08_05_pus_map.mod wobs J0348-2749_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0348-2749_S_2017_08_05_pus_uvs.fits wwins J0348-2749_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J0348-2749_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244137 Jy ! Component: 100 - total flux cleaned = 0.00454367 Jy ! Component: 150 - total flux cleaned = 0.00579071 Jy ! Component: 200 - total flux cleaned = 0.00681757 Jy ! Component: 250 - total flux cleaned = 0.007649 Jy ! Component: 300 - total flux cleaned = 0.00837168 Jy ! Component: 350 - total flux cleaned = 0.00906194 Jy ! Component: 400 - total flux cleaned = 0.00978296 Jy ! Component: 450 - total flux cleaned = 0.0103604 Jy ! Component: 500 - total flux cleaned = 0.0109692 Jy ! Component: 550 - total flux cleaned = 0.0114481 Jy ! Component: 600 - total flux cleaned = 0.0118591 Jy ! Component: 650 - total flux cleaned = 0.0123051 Jy ! Component: 700 - total flux cleaned = 0.0127833 Jy ! Component: 750 - total flux cleaned = 0.013246 Jy ! Component: 800 - total flux cleaned = 0.0137401 Jy ! Component: 850 - total flux cleaned = 0.0141335 Jy ! Component: 900 - total flux cleaned = 0.0145586 Jy ! Component: 950 - total flux cleaned = 0.0149733 Jy ! Component: 1000 - total flux cleaned = 0.0155002 Jy ! Component: 1050 - total flux cleaned = 0.015936 Jy ! Component: 1100 - total flux cleaned = 0.0163624 Jy ! Component: 1150 - total flux cleaned = 0.0168183 Jy ! Component: 1200 - total flux cleaned = 0.0172288 Jy ! Component: 1250 - total flux cleaned = 0.0177403 Jy ! Component: 1300 - total flux cleaned = 0.0181348 Jy ! Component: 1350 - total flux cleaned = 0.0185573 Jy ! Component: 1400 - total flux cleaned = 0.0190756 Jy ! Component: 1450 - total flux cleaned = 0.0195168 Jy ! Component: 1500 - total flux cleaned = 0.0199506 Jy ! Component: 1550 - total flux cleaned = 0.0203765 Jy ! Component: 1600 - total flux cleaned = 0.0207315 Jy ! Component: 1650 - total flux cleaned = 0.0211452 Jy ! Component: 1700 - total flux cleaned = 0.0215213 Jy ! Component: 1750 - total flux cleaned = 0.0219844 Jy ! Component: 1800 - total flux cleaned = 0.0223798 Jy ! Component: 1850 - total flux cleaned = 0.0227094 Jy ! Component: 1900 - total flux cleaned = 0.0231234 Jy ! Component: 1950 - total flux cleaned = 0.0234734 Jy ! Component: 2000 - total flux cleaned = 0.0238762 Jy ! Component: 2050 - total flux cleaned = 0.0241319 Jy ! Component: 2100 - total flux cleaned = 0.0245247 Jy ! Component: 2150 - total flux cleaned = 0.024857 Jy ! Component: 2200 - total flux cleaned = 0.0251582 Jy ! Component: 2250 - total flux cleaned = 0.025375 Jy ! Component: 2300 - total flux cleaned = 0.0257236 Jy ! Component: 2350 - total flux cleaned = 0.0259889 Jy ! Component: 2400 - total flux cleaned = 0.0262775 Jy ! Component: 2450 - total flux cleaned = 0.0265629 Jy ! Component: 2500 - total flux cleaned = 0.0268452 Jy ! Component: 2550 - total flux cleaned = 0.0270737 Jy ! Component: 2600 - total flux cleaned = 0.0273753 Jy ! Component: 2650 - total flux cleaned = 0.0275991 Jy ! Component: 2700 - total flux cleaned = 0.0278208 Jy ! Component: 2750 - total flux cleaned = 0.028089 Jy ! Component: 2800 - total flux cleaned = 0.0283068 Jy ! Component: 2850 - total flux cleaned = 0.0285466 Jy ! Component: 2900 - total flux cleaned = 0.0287843 Jy ! Component: 2950 - total flux cleaned = 0.0289963 Jy ! Component: 3000 - total flux cleaned = 0.0292766 Jy ! Component: 3050 - total flux cleaned = 0.0295083 Jy ! Component: 3100 - total flux cleaned = 0.0296925 Jy ! Component: 3150 - total flux cleaned = 0.0298985 Jy ! Component: 3200 - total flux cleaned = 0.0301032 Jy ! Component: 3250 - total flux cleaned = 0.0303064 Jy ! Component: 3300 - total flux cleaned = 0.0305308 Jy ! Component: 3350 - total flux cleaned = 0.0307092 Jy ! Component: 3400 - total flux cleaned = 0.0309528 Jy ! Component: 3450 - total flux cleaned = 0.0310629 Jy ! Component: 3500 - total flux cleaned = 0.0313037 Jy ! Component: 3550 - total flux cleaned = 0.0314993 Jy ! Component: 3600 - total flux cleaned = 0.0316938 Jy ! Component: 3650 - total flux cleaned = 0.0318656 Jy ! Component: 3700 - total flux cleaned = 0.0320578 Jy ! Component: 3750 - total flux cleaned = 0.0322063 Jy ! Component: 3800 - total flux cleaned = 0.0323753 Jy ! Component: 3850 - total flux cleaned = 0.0326063 Jy ! Component: 3900 - total flux cleaned = 0.0327526 Jy ! Component: 3950 - total flux cleaned = 0.0329603 Jy ! Component: 4000 - total flux cleaned = 0.0331668 Jy ! Component: 4050 - total flux cleaned = 0.0333517 Jy ! Total flux subtracted in 4096 components = 0.0335357 Jy ! Clean residual min=-0.001244 max=0.001415 Jy/beam ! Clean residual mean=0.000064 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.641395 Jy keep ! Adding 389 model components to the UV plane model. ! The established model now contains 540 components and 0.641395 Jy ![Exited script file: muppet] wmap "J0348-2749_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.976 x 17.07 at 0.6704 degrees (North through East) ! Clean map min=-0.0051939 max=0.47525 Jy/beam ! Writing clean map to FITS file: J0348-2749_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.475247 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000384257 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.242562 0.242562 0.485125 0.970249 1.9405 3.881 7.76199 15.524 31.048 62.0959 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.475 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.976 x 17.07 at 0.6704 degrees (North through East) ! Clean map min=-0.0051939 max=0.47525 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0348-2749_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:19:58 2019