! Started logfile: J0348-2749_S_2017_06_15_pus_uvs.log on Tue May 7 15:10:26 2019 obs J0348-2749_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0348-2749_S_2017_06_15_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.573333 visibilities/baseline/integration-bin. ! Found source: J0348-2749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0348-2749_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.702314Jy sigma=0.004644 ! Fit after self-cal, rms=0.668248Jy sigma=0.004396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=6.769 mas, bpa=3.4 degrees ! Estimated noise=4683.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257334 Jy ! Component: 100 - total flux cleaned = 0.364486 Jy ! Total flux subtracted in 100 components = 0.364486 Jy ! Clean residual min=-0.030376 max=0.051236 Jy/beam ! Clean residual mean=0.000009 rms=0.010356 Jy/beam ! Combined flux in latest and established models = 0.364486 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.364486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149991Jy sigma=0.001000 ! Fit after self-cal, rms=0.149318Jy sigma=0.000996 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=7.398 mas, bpa=4.925 degrees ! Estimated noise=4142.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0762636 Jy ! Component: 100 - total flux cleaned = 0.113149 Jy ! Component: 150 - total flux cleaned = 0.132991 Jy ! Component: 200 - total flux cleaned = 0.144161 Jy ! Total flux subtracted in 200 components = 0.144161 Jy ! Clean residual min=-0.016800 max=0.024346 Jy/beam ! Clean residual mean=0.000036 rms=0.005696 Jy/beam ! Combined flux in latest and established models = 0.508647 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 41 components and 0.508647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111253Jy sigma=0.000705 ! Fit after self-cal, rms=0.111111Jy sigma=0.000704 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.91 HN 1.00* KP 1.02 ! LA 0.99 MK 0.99 NL 1.01 OV 0.97 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 0.95 ! LA 0.94 MK 1.04 NL 1.28 OV 0.99 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 0.93 ! LA 0.95 MK 1.01 NL 1.21 OV 0.96 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.111111Jy sigma=0.000704 ! Fit after self-cal, rms=0.106515Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.485 mas, bpa=6.089 degrees ! Estimated noise=4194.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.39745e-06 Jy ! Component: 100 - total flux cleaned = 0.000187187 Jy ! Component: 150 - total flux cleaned = 0.000273482 Jy ! Component: 200 - total flux cleaned = 0.00043752 Jy ! Total flux subtracted in 200 components = 0.00043752 Jy ! Clean residual min=-0.009840 max=0.014670 Jy/beam ! Clean residual mean=0.000020 rms=0.003184 Jy/beam ! Combined flux in latest and established models = 0.509084 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 44 components and 0.509084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106394Jy sigma=0.000657 ! Fit after self-cal, rms=0.106654Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106654Jy sigma=0.000657 ! Fit after self-cal, rms=0.106625Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.485 mas, bpa=6.107 degrees ! Estimated noise=4192.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.09822e-06 Jy ! Component: 100 - total flux cleaned = 0.000147036 Jy ! Component: 150 - total flux cleaned = 0.000218535 Jy ! Component: 200 - total flux cleaned = 0.000361996 Jy ! Total flux subtracted in 200 components = 0.000361996 Jy ! Clean residual min=-0.009666 max=0.014550 Jy/beam ! Clean residual mean=0.000020 rms=0.003151 Jy/beam ! Combined flux in latest and established models = 0.509446 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.509446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106536Jy sigma=0.000656 ! Fit after self-cal, rms=0.106541Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-76.5, 82). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119643 Jy ! Component: 100 - total flux cleaned = 0.0170857 Jy ! Component: 150 - total flux cleaned = 0.0207599 Jy ! Component: 200 - total flux cleaned = 0.0237195 Jy ! Total flux subtracted in 200 components = 0.0237195 Jy ! Clean residual min=-0.008314 max=0.009802 Jy/beam ! Clean residual mean=0.000013 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 0.533166 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 74 components and 0.533166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105238Jy sigma=0.000646 ! Fit after self-cal, rms=0.105209Jy sigma=0.000646 ! Inverting map ! Added new window around map position (99.5, -86). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0087449 Jy ! Component: 100 - total flux cleaned = 0.0114509 Jy ! Component: 150 - total flux cleaned = 0.0120935 Jy ! Component: 200 - total flux cleaned = 0.0124249 Jy ! Total flux subtracted in 200 components = 0.0124249 Jy ! Clean residual min=-0.007075 max=0.008992 Jy/beam ! Clean residual mean=0.000014 rms=0.001996 Jy/beam ! Combined flux in latest and established models = 0.545591 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.545591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104367Jy sigma=0.000641 ! Fit after self-cal, rms=0.104364Jy sigma=0.000640 ! Inverting map ! Added new window around map position (67.5, -50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00662617 Jy ! Component: 100 - total flux cleaned = 0.00720497 Jy ! Component: 150 - total flux cleaned = 0.00796741 Jy ! Component: 200 - total flux cleaned = 0.00864361 Jy ! Total flux subtracted in 200 components = 0.00864361 Jy ! Clean residual min=-0.007004 max=0.006732 Jy/beam ! Clean residual mean=0.000011 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 0.554235 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 106 components and 0.554235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103659Jy sigma=0.000637 ! Fit after self-cal, rms=0.103624Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103624Jy sigma=0.000636 ! Fit after self-cal, rms=0.103421Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.482 mas, bpa=6.097 degrees ! Estimated noise=4182.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361482 Jy ! Component: 100 - total flux cleaned = 0.00423492 Jy ! Component: 150 - total flux cleaned = 0.00441376 Jy ! Component: 200 - total flux cleaned = 0.00424892 Jy ! Total flux subtracted in 200 components = 0.00424892 Jy ! Clean residual min=-0.006946 max=0.005893 Jy/beam ! Clean residual mean=0.000009 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.558483 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.558484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103190Jy sigma=0.000635 ! Fit after self-cal, rms=0.103197Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180929 Jy ! Component: 100 - total flux cleaned = 0.00166069 Jy ! Component: 150 - total flux cleaned = 0.00144995 Jy ! Component: 200 - total flux cleaned = 0.00131786 Jy ! Total flux subtracted in 200 components = 0.00131786 Jy ! Clean residual min=-0.006745 max=0.005966 Jy/beam ! Clean residual mean=0.000009 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.559801 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 129 components and 0.559801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103078Jy sigma=0.000634 ! Fit after self-cal, rms=0.103084Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103084Jy sigma=0.000634 ! Fit after self-cal, rms=0.103209Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.88 mas, bmaj=20.91 mas, bpa=10.57 degrees ! Estimated noise=5643.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157247 Jy ! Component: 100 - total flux cleaned = 0.00133363 Jy ! Component: 150 - total flux cleaned = 0.00127974 Jy ! Component: 200 - total flux cleaned = 0.00117565 Jy ! Total flux subtracted in 200 components = 0.00117565 Jy ! Clean residual min=-0.007997 max=0.006714 Jy/beam ! Clean residual mean=0.000019 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 0.560977 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 145 components and 0.560977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103160Jy sigma=0.000634 ! Fit after self-cal, rms=0.103164Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765198 Jy ! Component: 100 - total flux cleaned = 0.000507139 Jy ! Component: 150 - total flux cleaned = 0.000262248 Jy ! Component: 200 - total flux cleaned = -1.98874e-05 Jy ! Total flux subtracted in 200 components = -1.98874e-05 Jy ! Clean residual min=-0.007863 max=0.006716 Jy/beam ! Clean residual mean=0.000019 rms=0.002058 Jy/beam ! Combined flux in latest and established models = 0.560957 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 151 components and 0.560957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103148Jy sigma=0.000634 ! Fit after self-cal, rms=0.103151Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.484 mas, bpa=6.062 degrees ! Estimated noise=4184.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 7.484 at 6.062 degrees (North through East) ! Clean map min=-0.0061641 max=0.34022 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.361 mas, bmaj=6.807 mas, bpa=4.897 degrees ! Estimated noise=4694.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.258635 Jy ! Component: 100 - total flux cleaned = 0.366964 Jy ! Component: 150 - total flux cleaned = 0.424604 Jy ! Component: 200 - total flux cleaned = 0.455874 Jy ! Total flux subtracted in 200 components = 0.455874 Jy ! Clean residual min=-0.016094 max=0.019041 Jy/beam ! Clean residual mean=0.000011 rms=0.004740 Jy/beam ! Combined flux in latest and established models = 0.455874 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.455874 Jy ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.484 mas, bpa=6.062 degrees ! Estimated noise=4184.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0254098 Jy ! Component: 100 - total flux cleaned = 0.0420418 Jy ! Component: 150 - total flux cleaned = 0.0549424 Jy ! Component: 200 - total flux cleaned = 0.0650869 Jy ! Total flux subtracted in 200 components = 0.0650869 Jy ! Clean residual min=-0.009354 max=0.010339 Jy/beam ! Clean residual mean=0.000014 rms=0.002657 Jy/beam ! Combined flux in latest and established models = 0.520961 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 51 components and 0.520961 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.88 mas, bmaj=20.91 mas, bpa=10.57 degrees ! Estimated noise=5643.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125604 Jy ! Component: 100 - total flux cleaned = 0.0204593 Jy ! Component: 150 - total flux cleaned = 0.0263591 Jy ! Component: 200 - total flux cleaned = 0.0309036 Jy ! Total flux subtracted in 200 components = 0.0309036 Jy ! Clean residual min=-0.009585 max=0.006506 Jy/beam ! Clean residual mean=0.000025 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 0.551864 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358008 Jy ! Component: 100 - total flux cleaned = 0.00643667 Jy ! Component: 150 - total flux cleaned = 0.0075925 Jy ! Component: 200 - total flux cleaned = 0.00792917 Jy ! Total flux subtracted in 200 components = 0.00792917 Jy ! Clean residual min=-0.008844 max=0.006496 Jy/beam ! Clean residual mean=0.000024 rms=0.002295 Jy/beam ! Combined flux in latest and established models = 0.559793 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 116 components and 0.559793 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.484 mas, bpa=6.062 degrees ! Estimated noise=4184.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197407 Jy ! Component: 100 - total flux cleaned = 0.00273496 Jy ! Component: 150 - total flux cleaned = 0.00300624 Jy ! Component: 200 - total flux cleaned = 0.00300731 Jy ! Total flux subtracted in 200 components = 0.00300731 Jy ! Clean residual min=-0.006722 max=0.006081 Jy/beam ! Clean residual mean=0.000009 rms=0.001667 Jy/beam ! Combined flux in latest and established models = 0.562801 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 0.562801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103533Jy sigma=0.000636 ! Fit after self-cal, rms=0.103502Jy sigma=0.000636 wmodel J0348-2749_S_2017_06_15_pus_map.mod ! Writing 135 model components to file: J0348-2749_S_2017_06_15_pus_map.mod wobs J0348-2749_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0348-2749_S_2017_06_15_pus_uvs.fits wwins J0348-2749_S_2017_06_15_pus_map.win ! wwins: Wrote 4 windows to J0348-2749_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000621481 Jy ! Component: 100 - total flux cleaned = -0.000625583 Jy ! Component: 150 - total flux cleaned = -0.00062443 Jy ! Component: 200 - total flux cleaned = -0.00052974 Jy ! Component: 250 - total flux cleaned = -0.000697912 Jy ! Component: 300 - total flux cleaned = -0.00101718 Jy ! Component: 350 - total flux cleaned = -0.00139745 Jy ! Component: 400 - total flux cleaned = -0.00183555 Jy ! Component: 450 - total flux cleaned = -0.00204434 Jy ! Component: 500 - total flux cleaned = -0.0021114 Jy ! Component: 550 - total flux cleaned = -0.00237343 Jy ! Component: 600 - total flux cleaned = -0.00262558 Jy ! Component: 650 - total flux cleaned = -0.00280724 Jy ! Component: 700 - total flux cleaned = -0.00292583 Jy ! Component: 750 - total flux cleaned = -0.00309765 Jy ! Component: 800 - total flux cleaned = -0.0029295 Jy ! Component: 850 - total flux cleaned = -0.00293039 Jy ! Component: 900 - total flux cleaned = -0.00287755 Jy ! Component: 950 - total flux cleaned = -0.00277406 Jy ! Component: 1000 - total flux cleaned = -0.00272393 Jy ! Component: 1050 - total flux cleaned = -0.00257537 Jy ! Component: 1100 - total flux cleaned = -0.00257579 Jy ! Component: 1150 - total flux cleaned = -0.0024319 Jy ! Component: 1200 - total flux cleaned = -0.00233757 Jy ! Component: 1250 - total flux cleaned = -0.00215317 Jy ! Component: 1300 - total flux cleaned = -0.00206272 Jy ! Component: 1350 - total flux cleaned = -0.00201819 Jy ! Component: 1400 - total flux cleaned = -0.00188612 Jy ! Component: 1450 - total flux cleaned = -0.00205982 Jy ! Component: 1500 - total flux cleaned = -0.00218882 Jy ! Component: 1550 - total flux cleaned = -0.00231677 Jy ! Component: 1600 - total flux cleaned = -0.00252837 Jy ! Component: 1650 - total flux cleaned = -0.00265455 Jy ! Component: 1700 - total flux cleaned = -0.00286301 Jy ! Component: 1750 - total flux cleaned = -0.00298736 Jy ! Component: 1800 - total flux cleaned = -0.00302914 Jy ! Component: 1850 - total flux cleaned = -0.00319354 Jy ! Component: 1900 - total flux cleaned = -0.00323468 Jy ! Component: 1950 - total flux cleaned = -0.00335662 Jy ! Component: 2000 - total flux cleaned = -0.0034378 Jy ! Component: 2050 - total flux cleaned = -0.00359971 Jy ! Component: 2100 - total flux cleaned = -0.0036402 Jy ! Component: 2150 - total flux cleaned = -0.00372108 Jy ! Component: 2200 - total flux cleaned = -0.00376145 Jy ! Component: 2250 - total flux cleaned = -0.00388213 Jy ! Component: 2300 - total flux cleaned = -0.00400299 Jy ! Component: 2350 - total flux cleaned = -0.004003 Jy ! Component: 2400 - total flux cleaned = -0.00408405 Jy ! Component: 2450 - total flux cleaned = -0.00420524 Jy ! Component: 2500 - total flux cleaned = -0.00432687 Jy ! Component: 2550 - total flux cleaned = -0.00444952 Jy ! Component: 2600 - total flux cleaned = -0.00461428 Jy ! Component: 2650 - total flux cleaned = -0.00465581 Jy ! Component: 2700 - total flux cleaned = -0.0047807 Jy ! Component: 2750 - total flux cleaned = -0.00478096 Jy ! Component: 2800 - total flux cleaned = -0.00490775 Jy ! Component: 2850 - total flux cleaned = -0.00499349 Jy ! Component: 2900 - total flux cleaned = -0.00512271 Jy ! Component: 2950 - total flux cleaned = -0.00520981 Jy ! Component: 3000 - total flux cleaned = -0.00538539 Jy ! Component: 3050 - total flux cleaned = -0.0055185 Jy ! Component: 3100 - total flux cleaned = -0.00560862 Jy ! Component: 3150 - total flux cleaned = -0.00569925 Jy ! Component: 3200 - total flux cleaned = -0.00579132 Jy ! Component: 3250 - total flux cleaned = -0.00583832 Jy ! Component: 3300 - total flux cleaned = -0.00588546 Jy ! Component: 3350 - total flux cleaned = -0.00593299 Jy ! Component: 3400 - total flux cleaned = -0.00593264 Jy ! Component: 3450 - total flux cleaned = -0.00598193 Jy ! Component: 3500 - total flux cleaned = -0.00598224 Jy ! Component: 3550 - total flux cleaned = -0.0059825 Jy ! Component: 3600 - total flux cleaned = -0.00593106 Jy ! Component: 3650 - total flux cleaned = -0.00587814 Jy ! Component: 3700 - total flux cleaned = -0.00587792 Jy ! Component: 3750 - total flux cleaned = -0.00582276 Jy ! Component: 3800 - total flux cleaned = -0.00576623 Jy ! Component: 3850 - total flux cleaned = -0.00570916 Jy ! Component: 3900 - total flux cleaned = -0.00565106 Jy ! Component: 3950 - total flux cleaned = -0.00559231 Jy ! Component: 4000 - total flux cleaned = -0.00553204 Jy ! Component: 4050 - total flux cleaned = -0.00547058 Jy ! Total flux subtracted in 4096 components = -0.00540699 Jy ! Clean residual min=-0.003687 max=0.004221 Jy/beam ! Clean residual mean=0.000002 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.557394 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 364 components and 0.557394 Jy ![Exited script file: muppet] wmap "J0348-2749_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 7.484 at 6.062 degrees (North through East) ! Clean map min=-0.0057327 max=0.33777 Jy/beam ! Writing clean map to FITS file: J0348-2749_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.337773 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00105458 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.936647 0.936647 1.87329 3.74659 7.49317 14.9863 29.9727 59.9454 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.337 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 7.484 at 6.062 degrees (North through East) ! Clean map min=-0.0057327 max=0.33777 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0348-2749_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:10:31 2019