! Started logfile: J0348-2749_S_2017_06_10_pus_uvs.log on Mon May 6 14:44:34 2019 obs J0348-2749_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0348-2749_S_2017_06_10_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.312346 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0348-2749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1012 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0348-2749_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.554328Jy sigma=0.004236 ! Fit after self-cal, rms=0.517387Jy sigma=0.003932 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.617 mas, bmaj=43.12 mas, bpa=2.33 degrees ! Estimated noise=4098.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.380505 Jy ! Component: 100 - total flux cleaned = 0.468656 Jy ! Total flux subtracted in 100 components = 0.468656 Jy ! Clean residual min=-0.022544 max=0.033386 Jy/beam ! Clean residual mean=-0.000786 rms=0.009107 Jy/beam ! Combined flux in latest and established models = 0.468656 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.468656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107953Jy sigma=0.000795 ! Fit after self-cal, rms=0.107960Jy sigma=0.000795 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.64 mas, bmaj=44.84 mas, bpa=5.116 degrees ! Estimated noise=3456.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415189 Jy ! Component: 100 - total flux cleaned = 0.0578664 Jy ! Component: 150 - total flux cleaned = 0.0572551 Jy ! Component: 200 - total flux cleaned = 0.0568998 Jy ! Total flux subtracted in 200 components = 0.0568998 Jy ! Clean residual min=-0.006738 max=0.006863 Jy/beam ! Clean residual mean=-0.000245 rms=0.002698 Jy/beam ! Combined flux in latest and established models = 0.525556 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 102 components and 0.525556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091490Jy sigma=0.000665 ! Fit after self-cal, rms=0.091464Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.02 ! LA 1.00 MK 1.00* NL 1.00* OV 1.00 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.99 ! LA 1.00 MK 1.00* NL 1.06 OV 1.05 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.96 ! LA 0.98 MK 1.00* NL 1.00 OV 0.97 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.091464Jy sigma=0.000664 ! Fit after self-cal, rms=0.087965Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.39 mas, bmaj=44.96 mas, bpa=4.961 degrees ! Estimated noise=3569.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318769 Jy ! Component: 100 - total flux cleaned = 0.00492903 Jy ! Component: 150 - total flux cleaned = 0.0061565 Jy ! Component: 200 - total flux cleaned = 0.00732262 Jy ! Total flux subtracted in 200 components = 0.00732262 Jy ! Clean residual min=-0.001810 max=0.001804 Jy/beam ! Clean residual mean=-0.000042 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.532879 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 169 components and 0.532879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087283Jy sigma=0.000636 ! Fit after self-cal, rms=0.087294Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087294Jy sigma=0.000636 ! Fit after self-cal, rms=0.087204Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.4 mas, bmaj=44.96 mas, bpa=4.968 degrees ! Estimated noise=3565.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013171 Jy ! Component: 100 - total flux cleaned = 0.00244074 Jy ! Component: 150 - total flux cleaned = 0.00278388 Jy ! Component: 200 - total flux cleaned = 0.00278582 Jy ! Total flux subtracted in 200 components = 0.00278582 Jy ! Clean residual min=-0.001286 max=0.001258 Jy/beam ! Clean residual mean=-0.000025 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.535664 Jy selfcal ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 239 components and 0.535664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087022Jy sigma=0.000634 ! Fit after self-cal, rms=0.087019Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.31844e-05 Jy ! Component: 100 - total flux cleaned = 2.76843e-05 Jy ! Component: 150 - total flux cleaned = -0.000590274 Jy ! Component: 200 - total flux cleaned = -0.00122064 Jy ! Total flux subtracted in 200 components = -0.00122064 Jy ! Clean residual min=-0.001204 max=0.001186 Jy/beam ! Clean residual mean=-0.000019 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.534444 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 296 components and 0.534444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086920Jy sigma=0.000634 ! Fit after self-cal, rms=0.086916Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086916Jy sigma=0.000634 ! Fit after self-cal, rms=0.086907Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.4 mas, bmaj=44.97 mas, bpa=4.973 degrees ! Estimated noise=3564.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701547 Jy ! Component: 100 - total flux cleaned = 0.000766043 Jy ! Component: 150 - total flux cleaned = 0.000879513 Jy ! Component: 200 - total flux cleaned = 0.00109655 Jy ! Total flux subtracted in 200 components = 0.00109655 Jy ! Clean residual min=-0.000893 max=0.000895 Jy/beam ! Clean residual mean=-0.000014 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.53554 Jy selfcal ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 350 components and 0.53554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086822Jy sigma=0.000633 ! Fit after self-cal, rms=0.086820Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.8597e-06 Jy ! Component: 100 - total flux cleaned = 0.00021987 Jy ! Component: 150 - total flux cleaned = 0.000269057 Jy ! Component: 200 - total flux cleaned = 0.000121142 Jy ! Total flux subtracted in 200 components = 0.000121142 Jy ! Clean residual min=-0.000819 max=0.000822 Jy/beam ! Clean residual mean=-0.000011 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.535661 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 398 components and 0.535661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086759Jy sigma=0.000633 ! Fit after self-cal, rms=0.086758Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086758Jy sigma=0.000633 ! Fit after self-cal, rms=0.086742Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.43 mas, bmaj=45.8 mas, bpa=5.59 degrees ! Estimated noise=3563.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427206 Jy ! Component: 100 - total flux cleaned = 0.000467724 Jy ! Component: 150 - total flux cleaned = 0.000392181 Jy ! Component: 200 - total flux cleaned = 0.000465697 Jy ! Total flux subtracted in 200 components = 0.000465697 Jy ! Clean residual min=-0.000613 max=0.000615 Jy/beam ! Clean residual mean=-0.000006 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.536127 Jy selfcal ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 462 components and 0.536127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086700Jy sigma=0.000632 ! Fit after self-cal, rms=0.086700Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153744 Jy ! Component: 100 - total flux cleaned = 0.000153061 Jy ! Component: 150 - total flux cleaned = -1.98821e-05 Jy ! Component: 200 - total flux cleaned = -0.00019291 Jy ! Total flux subtracted in 200 components = -0.00019291 Jy ! Clean residual min=-0.000577 max=0.000576 Jy/beam ! Clean residual mean=-0.000005 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.535934 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 507 components and 0.535934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086666Jy sigma=0.000632 ! Fit after self-cal, rms=0.086666Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=10.4 mas, bmaj=44.97 mas, bpa=4.975 degrees ! Estimated noise=3563.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.4 x 44.97 at 4.975 degrees (North through East) ! Clean map min=-0.0053279 max=0.47369 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.697 mas, bmaj=43.38 mas, bpa=2.381 degrees ! Estimated noise=4215.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.377837 Jy ! Component: 100 - total flux cleaned = 0.464566 Jy ! Component: 150 - total flux cleaned = 0.498932 Jy ! Component: 200 - total flux cleaned = 0.515367 Jy ! Total flux subtracted in 200 components = 0.515367 Jy ! Clean residual min=-0.009527 max=0.009640 Jy/beam ! Clean residual mean=-0.000226 rms=0.003526 Jy/beam ! Combined flux in latest and established models = 0.515367 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.515367 Jy ! Inverting map and beam ! Estimated beam: bmin=10.4 mas, bmaj=44.97 mas, bpa=4.975 degrees ! Estimated noise=3563.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638121 Jy ! Component: 100 - total flux cleaned = 0.00807923 Jy ! Component: 150 - total flux cleaned = 0.0110402 Jy ! Component: 200 - total flux cleaned = 0.0120464 Jy ! Total flux subtracted in 200 components = 0.0120464 Jy ! Clean residual min=-0.003920 max=0.003920 Jy/beam ! Clean residual mean=-0.000074 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.527413 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 148 components and 0.527413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.43 mas, bmaj=45.8 mas, bpa=5.59 degrees ! Estimated noise=3563.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000768685 Jy ! Component: 100 - total flux cleaned = 0.00139037 Jy ! Component: 150 - total flux cleaned = 0.00151458 Jy ! Component: 200 - total flux cleaned = 0.00216181 Jy ! Total flux subtracted in 200 components = 0.00216181 Jy ! Clean residual min=-0.001684 max=0.001676 Jy/beam ! Clean residual mean=-0.000049 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.529575 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296802 Jy ! Component: 100 - total flux cleaned = -0.000164322 Jy ! Component: 150 - total flux cleaned = -0.000729327 Jy ! Component: 200 - total flux cleaned = -0.000829963 Jy ! Total flux subtracted in 200 components = -0.000829963 Jy ! Clean residual min=-0.001749 max=0.001731 Jy/beam ! Clean residual mean=-0.000028 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.528745 Jy ! Adding 132 model components to the UV plane model. ! The established model now contains 277 components and 0.528745 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=10.4 mas, bmaj=44.97 mas, bpa=4.975 degrees ! Estimated noise=3563.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000722263 Jy ! Component: 100 - total flux cleaned = 0.00150935 Jy ! Component: 150 - total flux cleaned = 0.0020541 Jy ! Component: 200 - total flux cleaned = 0.00248861 Jy ! Total flux subtracted in 200 components = 0.00248861 Jy ! Clean residual min=-0.001161 max=0.001167 Jy/beam ! Clean residual mean=-0.000024 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.531234 Jy selfcal ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 348 components and 0.531234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086954Jy sigma=0.000634 ! Fit after self-cal, rms=0.086941Jy sigma=0.000634 wmodel J0348-2749_S_2017_06_10_pus_map.mod ! Writing 348 model components to file: J0348-2749_S_2017_06_10_pus_map.mod wobs J0348-2749_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0348-2749_S_2017_06_10_pus_uvs.fits wwins J0348-2749_S_2017_06_10_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0348-2749_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.4 x 44.97 at 4.975 degrees (North through East) ! Clean map min=-0.0040362 max=0.47455 Jy/beam ! Writing clean map to FITS file: J0348-2749_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.474555 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000407617 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.257684 0.257684 0.515368 1.03074 2.06147 4.12294 8.24589 16.4918 32.9835 65.9671 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.474 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.4 x 44.97 at 4.975 degrees (North through East) ! Clean map min=-0.0040362 max=0.47455 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0348-2749_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:44:38 2019