! Started logfile: J0348-2749_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:03:49 2019 obs J0348-2749_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0348-2749_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.697222 visibilities/baseline/integration-bin. ! Found source: J0348-2749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0348-2749_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.716098Jy sigma=0.003939 ! Fit after self-cal, rms=0.710873Jy sigma=0.003910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=13.53 mas, bpa=0.5445 degrees ! Estimated noise=5344.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228346 Jy ! Component: 100 - total flux cleaned = 0.302078 Jy ! Total flux subtracted in 100 components = 0.302078 Jy ! Clean residual min=-0.026101 max=0.040682 Jy/beam ! Clean residual mean=0.000322 rms=0.009236 Jy/beam ! Combined flux in latest and established models = 0.302078 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.302078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166462Jy sigma=0.000870 ! Fit after self-cal, rms=0.166208Jy sigma=0.000869 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.042 mas, bmaj=15.05 mas, bpa=2.614 degrees ! Estimated noise=4351.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479006 Jy ! Component: 100 - total flux cleaned = 0.0681274 Jy ! Component: 150 - total flux cleaned = 0.0769715 Jy ! Component: 200 - total flux cleaned = 0.0770136 Jy ! Total flux subtracted in 200 components = 0.0770136 Jy ! Clean residual min=-0.021933 max=0.035388 Jy/beam ! Clean residual mean=0.000388 rms=0.008252 Jy/beam ! Combined flux in latest and established models = 0.379091 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 37 components and 0.379091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157368Jy sigma=0.000774 ! Fit after self-cal, rms=0.157287Jy sigma=0.000774 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.87 HN 1.02 KP 0.84 ! LA 0.95 MK 1.00* NL 0.92 OV 0.89 ! PT 1.63 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.94 HN 1.08 KP 0.87 ! LA 0.88 MK 1.00* NL 1.03 OV 0.97 ! PT 1.55 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.93 HN 1.06 KP 0.91 ! LA 0.88 MK 1.00* NL 0.98 OV 0.85 ! PT 1.77 SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.94 HN 1.05 KP 1.00* ! LA 0.71 MK 1.00* NL 1.00* OV 0.93 ! PT 1.74 SC 0.72 ! ! ! Fit before self-cal, rms=0.157287Jy sigma=0.000774 ! Fit after self-cal, rms=0.166065Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.985 mas, bmaj=15.02 mas, bpa=2.847 degrees ! Estimated noise=4275.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256717 Jy ! Component: 100 - total flux cleaned = 0.00210143 Jy ! Component: 150 - total flux cleaned = 0.00156141 Jy ! Component: 200 - total flux cleaned = 0.00110036 Jy ! Total flux subtracted in 200 components = 0.00110036 Jy ! Clean residual min=-0.011212 max=0.014079 Jy/beam ! Clean residual mean=0.000093 rms=0.003494 Jy/beam ! Combined flux in latest and established models = 0.380192 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.380192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165668Jy sigma=0.000645 ! Fit after self-cal, rms=0.166744Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166744Jy sigma=0.000644 ! Fit after self-cal, rms=0.167574Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=14.99 mas, bpa=2.911 degrees ! Estimated noise=4261.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00096185 Jy ! Component: 100 - total flux cleaned = 0.000557237 Jy ! Component: 150 - total flux cleaned = 0.000290851 Jy ! Component: 200 - total flux cleaned = 4.96249e-05 Jy ! Total flux subtracted in 200 components = 4.96249e-05 Jy ! Clean residual min=-0.010642 max=0.013649 Jy/beam ! Clean residual mean=0.000092 rms=0.003413 Jy/beam ! Combined flux in latest and established models = 0.380241 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.380241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167377Jy sigma=0.000643 ! Fit after self-cal, rms=0.167371Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000352415 Jy ! Component: 100 - total flux cleaned = -0.00049348 Jy ! Component: 150 - total flux cleaned = -0.000692051 Jy ! Component: 200 - total flux cleaned = -0.000880448 Jy ! Total flux subtracted in 200 components = -0.000880448 Jy ! Clean residual min=-0.010583 max=0.013451 Jy/beam ! Clean residual mean=0.000092 rms=0.003396 Jy/beam ! Combined flux in latest and established models = 0.379361 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.379361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167278Jy sigma=0.000643 ! Fit after self-cal, rms=0.167273Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167273Jy sigma=0.000643 ! Fit after self-cal, rms=0.167477Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=14.97 mas, bpa=2.921 degrees ! Estimated noise=4253.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181448 Jy ! Component: 100 - total flux cleaned = -7.74044e-05 Jy ! Component: 150 - total flux cleaned = -0.00026025 Jy ! Component: 200 - total flux cleaned = -0.000373394 Jy ! Total flux subtracted in 200 components = -0.000373394 Jy ! Clean residual min=-0.010429 max=0.013341 Jy/beam ! Clean residual mean=0.000093 rms=0.003375 Jy/beam ! Combined flux in latest and established models = 0.378987 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.378987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167384Jy sigma=0.000642 ! Fit after self-cal, rms=0.167382Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103869 Jy ! Component: 100 - total flux cleaned = -0.000207105 Jy ! Component: 150 - total flux cleaned = -0.00035679 Jy ! Component: 200 - total flux cleaned = -0.000453158 Jy ! Total flux subtracted in 200 components = -0.000453158 Jy ! Clean residual min=-0.010472 max=0.013263 Jy/beam ! Clean residual mean=0.000092 rms=0.003366 Jy/beam ! Combined flux in latest and established models = 0.378534 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.378534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167324Jy sigma=0.000642 ! Fit after self-cal, rms=0.167321Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167321Jy sigma=0.000642 ! Fit after self-cal, rms=0.167530Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.094 mas, bmaj=19.94 mas, bpa=-6.55 degrees ! Estimated noise=5251.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074875 Jy ! Component: 100 - total flux cleaned = 0.00083073 Jy ! Component: 150 - total flux cleaned = 0.000895713 Jy ! Component: 200 - total flux cleaned = 0.00078092 Jy ! Total flux subtracted in 200 components = 0.00078092 Jy ! Clean residual min=-0.013136 max=0.018206 Jy/beam ! Clean residual mean=0.000151 rms=0.004948 Jy/beam ! Combined flux in latest and established models = 0.379315 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.379315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167476Jy sigma=0.000642 ! Fit after self-cal, rms=0.167473Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.6501e-05 Jy ! Component: 100 - total flux cleaned = -0.000113793 Jy ! Component: 150 - total flux cleaned = -0.00016894 Jy ! Component: 200 - total flux cleaned = -0.000218951 Jy ! Total flux subtracted in 200 components = -0.000218951 Jy ! Clean residual min=-0.013153 max=0.018005 Jy/beam ! Clean residual mean=0.000149 rms=0.004938 Jy/beam ! Combined flux in latest and established models = 0.379096 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 91 components and 0.379096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167475Jy sigma=0.000642 ! Fit after self-cal, rms=0.167452Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=14.97 mas, bpa=2.929 degrees ! Estimated noise=4253.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.954 x 14.97 at 2.929 degrees (North through East) ! Clean map min=-0.010422 max=0.31264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=13.44 mas, bpa=1.09 degrees ! Estimated noise=5166.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.221946 Jy ! Component: 100 - total flux cleaned = 0.298189 Jy ! Component: 150 - total flux cleaned = 0.337659 Jy ! Component: 200 - total flux cleaned = 0.360132 Jy ! Total flux subtracted in 200 components = 0.360132 Jy ! Clean residual min=-0.013766 max=0.013805 Jy/beam ! Clean residual mean=0.000105 rms=0.003786 Jy/beam ! Combined flux in latest and established models = 0.360132 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.360132 Jy ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=14.97 mas, bpa=2.929 degrees ! Estimated noise=4253.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157773 Jy ! Component: 100 - total flux cleaned = 0.0208496 Jy ! Component: 150 - total flux cleaned = 0.0212863 Jy ! Component: 200 - total flux cleaned = 0.0214566 Jy ! Total flux subtracted in 200 components = 0.0214566 Jy ! Clean residual min=-0.011161 max=0.014765 Jy/beam ! Clean residual mean=0.000102 rms=0.003539 Jy/beam ! Combined flux in latest and established models = 0.381588 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.381588 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.094 mas, bmaj=19.94 mas, bpa=-6.55 degrees ! Estimated noise=5251.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483705 Jy ! Component: 100 - total flux cleaned = 0.000484228 Jy ! Component: 150 - total flux cleaned = 0.000489124 Jy ! Component: 200 - total flux cleaned = 0.000138523 Jy ! Total flux subtracted in 200 components = 0.000138523 Jy ! Clean residual min=-0.013104 max=0.018915 Jy/beam ! Clean residual mean=0.000158 rms=0.005030 Jy/beam ! Combined flux in latest and established models = 0.381727 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317216 Jy ! Component: 100 - total flux cleaned = -0.000693961 Jy ! Component: 150 - total flux cleaned = -0.000949186 Jy ! Component: 200 - total flux cleaned = -0.00109925 Jy ! Total flux subtracted in 200 components = -0.00109925 Jy ! Clean residual min=-0.013222 max=0.018335 Jy/beam ! Clean residual mean=0.000154 rms=0.004971 Jy/beam ! Combined flux in latest and established models = 0.380628 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.380628 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=14.97 mas, bpa=2.929 degrees ! Estimated noise=4253.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.62961e-05 Jy ! Component: 100 - total flux cleaned = -0.000486425 Jy ! Component: 150 - total flux cleaned = -0.000813508 Jy ! Component: 200 - total flux cleaned = -0.0010812 Jy ! Total flux subtracted in 200 components = -0.0010812 Jy ! Clean residual min=-0.010461 max=0.013008 Jy/beam ! Clean residual mean=0.000091 rms=0.003356 Jy/beam ! Combined flux in latest and established models = 0.379547 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 76 components and 0.379547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167621Jy sigma=0.000642 ! Fit after self-cal, rms=0.167594Jy sigma=0.000642 wmodel J0348-2749_S_2017_01_16_pus_map.mod ! Writing 76 model components to file: J0348-2749_S_2017_01_16_pus_map.mod wobs J0348-2749_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0348-2749_S_2017_01_16_pus_uvs.fits wwins J0348-2749_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0348-2749_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546726 Jy ! Component: 100 - total flux cleaned = 0.00719996 Jy ! Component: 150 - total flux cleaned = 0.00824083 Jy ! Component: 200 - total flux cleaned = 0.00888619 Jy ! Component: 250 - total flux cleaned = 0.009343 Jy ! Component: 300 - total flux cleaned = 0.00963198 Jy ! Component: 350 - total flux cleaned = 0.0101911 Jy ! Component: 400 - total flux cleaned = 0.010725 Jy ! Component: 450 - total flux cleaned = 0.0111051 Jy ! Component: 500 - total flux cleaned = 0.0113501 Jy ! Component: 550 - total flux cleaned = 0.0112327 Jy ! Component: 600 - total flux cleaned = 0.0110075 Jy ! Component: 650 - total flux cleaned = 0.0107913 Jy ! Component: 700 - total flux cleaned = 0.0106862 Jy ! Component: 750 - total flux cleaned = 0.0103765 Jy ! Component: 800 - total flux cleaned = 0.0101765 Jy ! Component: 850 - total flux cleaned = 0.0102723 Jy ! Component: 900 - total flux cleaned = 0.0103682 Jy ! Component: 950 - total flux cleaned = 0.0107395 Jy ! Component: 1000 - total flux cleaned = 0.0110116 Jy ! Component: 1050 - total flux cleaned = 0.0112778 Jy ! Component: 1100 - total flux cleaned = 0.0116281 Jy ! Component: 1150 - total flux cleaned = 0.0116276 Jy ! Component: 1200 - total flux cleaned = 0.0115474 Jy ! Component: 1250 - total flux cleaned = 0.012122 Jy ! Component: 1300 - total flux cleaned = 0.0121206 Jy ! Component: 1350 - total flux cleaned = 0.0121974 Jy ! Component: 1400 - total flux cleaned = 0.0124306 Jy ! Component: 1450 - total flux cleaned = 0.0128888 Jy ! Component: 1500 - total flux cleaned = 0.0134122 Jy ! Component: 1550 - total flux cleaned = 0.0135605 Jy ! Component: 1600 - total flux cleaned = 0.0142145 Jy ! Component: 1650 - total flux cleaned = 0.0144285 Jy ! Component: 1700 - total flux cleaned = 0.0147103 Jy ! Component: 1750 - total flux cleaned = 0.0151264 Jy ! Component: 1800 - total flux cleaned = 0.0154 Jy ! Component: 1850 - total flux cleaned = 0.0157384 Jy ! Component: 1900 - total flux cleaned = 0.0162697 Jy ! Component: 1950 - total flux cleaned = 0.0164657 Jy ! Component: 2000 - total flux cleaned = 0.016854 Jy ! Component: 2050 - total flux cleaned = 0.0172364 Jy ! Component: 2100 - total flux cleaned = 0.017425 Jy ! Component: 2150 - total flux cleaned = 0.0179215 Jy ! Component: 2200 - total flux cleaned = 0.0183493 Jy ! Component: 2250 - total flux cleaned = 0.0186515 Jy ! Component: 2300 - total flux cleaned = 0.0188299 Jy ! Component: 2350 - total flux cleaned = 0.0190069 Jy ! Component: 2400 - total flux cleaned = 0.0190648 Jy ! Component: 2450 - total flux cleaned = 0.0190646 Jy ! Component: 2500 - total flux cleaned = 0.0192357 Jy ! Component: 2550 - total flux cleaned = 0.0192368 Jy ! Component: 2600 - total flux cleaned = 0.0194048 Jy ! Component: 2650 - total flux cleaned = 0.0195153 Jy ! Component: 2700 - total flux cleaned = 0.0195697 Jy ! Component: 2750 - total flux cleaned = 0.0196235 Jy ! Component: 2800 - total flux cleaned = 0.0195169 Jy ! Component: 2850 - total flux cleaned = 0.0195171 Jy ! Component: 2900 - total flux cleaned = 0.0195174 Jy ! Component: 2950 - total flux cleaned = 0.019465 Jy ! Component: 3000 - total flux cleaned = 0.0192595 Jy ! Component: 3050 - total flux cleaned = 0.0191576 Jy ! Component: 3100 - total flux cleaned = 0.0192082 Jy ! Component: 3150 - total flux cleaned = 0.019258 Jy ! Component: 3200 - total flux cleaned = 0.0192573 Jy ! Component: 3250 - total flux cleaned = 0.0191584 Jy ! Component: 3300 - total flux cleaned = 0.0191091 Jy ! Component: 3350 - total flux cleaned = 0.019109 Jy ! Component: 3400 - total flux cleaned = 0.0193004 Jy ! Component: 3450 - total flux cleaned = 0.0192052 Jy ! Component: 3500 - total flux cleaned = 0.0191577 Jy ! Component: 3550 - total flux cleaned = 0.0191572 Jy ! Component: 3600 - total flux cleaned = 0.0192493 Jy ! Component: 3650 - total flux cleaned = 0.019111 Jy ! Component: 3700 - total flux cleaned = 0.0192481 Jy ! Component: 3750 - total flux cleaned = 0.0193388 Jy ! Component: 3800 - total flux cleaned = 0.0195632 Jy ! Component: 3850 - total flux cleaned = 0.0194287 Jy ! Component: 3900 - total flux cleaned = 0.0195174 Jy ! Component: 3950 - total flux cleaned = 0.0196058 Jy ! Component: 4000 - total flux cleaned = 0.0196929 Jy ! Component: 4050 - total flux cleaned = 0.0199097 Jy ! Total flux subtracted in 4096 components = 0.0199526 Jy ! Clean residual min=-0.002459 max=0.002642 Jy/beam ! Clean residual mean=0.000005 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.399499 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 371 components and 0.399499 Jy ![Exited script file: muppet] wmap "J0348-2749_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.954 x 14.97 at 2.929 degrees (North through East) ! Clean map min=-0.0056218 max=0.30712 Jy/beam ! Writing clean map to FITS file: J0348-2749_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.307115 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000827184 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.808019 0.808019 1.61604 3.23208 6.46415 12.9283 25.8566 51.7132 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.307 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.954 x 14.97 at 2.929 degrees (North through East) ! Clean map min=-0.0056218 max=0.30712 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0348-2749_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:03:54 2019