! Started logfile: J0345+1453_S_2017_05_27_pus_uvs.log on Fri May 3 10:56:17 2019 obs J0345+1453_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0345+1453_S_2017_05_27_pus_uva.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.888889 visibilities/baseline/integration-bin. ! Found source: J0345+1453 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 3520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0345+1453_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.442299Jy sigma=0.054203 ! Fit after self-cal, rms=2.434823Jy sigma=0.054191 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=6.157 mas, bpa=4.931 degrees ! Estimated noise=1006.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130815 Jy ! Component: 100 - total flux cleaned = 0.18553 Jy ! Total flux subtracted in 100 components = 0.18553 Jy ! Clean residual min=-0.045675 max=0.078594 Jy/beam ! Clean residual mean=-0.000013 rms=0.015528 Jy/beam ! Combined flux in latest and established models = 0.18553 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.18553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.493791Jy sigma=0.006587 ! Fit after self-cal, rms=2.493755Jy sigma=0.006586 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=6.811 mas, bpa=4.856 degrees ! Estimated noise=760.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443741 Jy ! Component: 100 - total flux cleaned = 0.0686338 Jy ! Component: 150 - total flux cleaned = 0.075412 Jy ! Component: 200 - total flux cleaned = 0.0753485 Jy ! Total flux subtracted in 200 components = 0.0753485 Jy ! Clean residual min=-0.043723 max=0.061784 Jy/beam ! Clean residual mean=-0.000033 rms=0.014381 Jy/beam ! Combined flux in latest and established models = 0.260879 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 14 components and 0.260879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.495638Jy sigma=0.006070 ! Fit after self-cal, rms=2.495597Jy sigma=0.006069 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 24.26 FD 0.69 HN 0.91 KP 0.84 ! LA 0.83 MK 0.96 NL 0.88 OV 0.87 ! PT 0.88 SC 0.42 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.71 HN 0.95 KP 0.83 ! LA 0.78 MK 0.96 NL 1.00 OV 0.84 ! PT 0.84 SC 0.54 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 FD 0.75 HN 0.92 KP 0.82 ! LA 0.83 MK 0.95 NL 0.93 OV 0.76 ! PT 0.82 SC 0.55 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.77 HN 0.97 KP 1.00* ! LA 0.82 MK 0.82 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=2.495597Jy sigma=0.006069 ! Fit after self-cal, rms=1.972544Jy sigma=0.001258 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.314 mas, bpa=5.027 degrees ! Estimated noise=1060.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00374798 Jy ! Component: 100 - total flux cleaned = -0.00948098 Jy ! Component: 150 - total flux cleaned = -0.0137561 Jy ! Component: 200 - total flux cleaned = -0.0137754 Jy ! Total flux subtracted in 200 components = -0.0137754 Jy ! Clean residual min=-0.015796 max=0.013410 Jy/beam ! Clean residual mean=0.000014 rms=0.003095 Jy/beam ! Combined flux in latest and established models = 0.247104 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.247103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.958094Jy sigma=0.001015 ! Fit after self-cal, rms=1.958039Jy sigma=0.000991 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.958039Jy sigma=0.000991 ! Fit after self-cal, rms=0.064344Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=7.242 mas, bpa=4.106 degrees ! Estimated noise=1030.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00834655 Jy ! Component: 100 - total flux cleaned = -0.00922668 Jy ! Component: 150 - total flux cleaned = -0.00946094 Jy ! Component: 200 - total flux cleaned = -0.00964146 Jy ! Total flux subtracted in 200 components = -0.00964146 Jy ! Clean residual min=-0.007334 max=0.009818 Jy/beam ! Clean residual mean=0.000003 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.237462 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.237462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062316Jy sigma=0.000735 ! Fit after self-cal, rms=0.062270Jy sigma=0.000734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00869665 Jy ! Component: 100 - total flux cleaned = 0.0085092 Jy ! Component: 150 - total flux cleaned = 0.00835166 Jy ! Component: 200 - total flux cleaned = 0.00849294 Jy ! Total flux subtracted in 200 components = 0.00849294 Jy ! Clean residual min=-0.006045 max=0.005606 Jy/beam ! Clean residual mean=0.000006 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.245955 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.245955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060766Jy sigma=0.000711 ! Fit after self-cal, rms=0.060481Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060481Jy sigma=0.000708 ! Fit after self-cal, rms=0.059118Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.408 mas, bmaj=7.213 mas, bpa=3.592 degrees ! Estimated noise=1031.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100072 Jy ! Component: 100 - total flux cleaned = -0.00117935 Jy ! Component: 150 - total flux cleaned = -0.000932104 Jy ! Component: 200 - total flux cleaned = -0.000493418 Jy ! Total flux subtracted in 200 components = -0.000493418 Jy ! Clean residual min=-0.004951 max=0.004463 Jy/beam ! Clean residual mean=0.000004 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.245462 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.245462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058250Jy sigma=0.000684 ! Fit after self-cal, rms=0.058147Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114092 Jy ! Component: 100 - total flux cleaned = 0.00123204 Jy ! Component: 150 - total flux cleaned = 0.00123184 Jy ! Component: 200 - total flux cleaned = 0.00115638 Jy ! Total flux subtracted in 200 components = 0.00115638 Jy ! Clean residual min=-0.004539 max=0.003975 Jy/beam ! Clean residual mean=0.000005 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.246618 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 66 components and 0.246618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057933Jy sigma=0.000680 ! Fit after self-cal, rms=0.057913Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057913Jy sigma=0.000679 ! Fit after self-cal, rms=0.057343Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=10.86 mas, bpa=-0.6839 degrees ! Estimated noise=1293.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111102 Jy ! Component: 100 - total flux cleaned = 0.000741576 Jy ! Component: 150 - total flux cleaned = 0.000585439 Jy ! Component: 200 - total flux cleaned = 0.000626138 Jy ! Total flux subtracted in 200 components = 0.000626138 Jy ! Clean residual min=-0.003620 max=0.003809 Jy/beam ! Clean residual mean=0.000009 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.247244 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.247244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057116Jy sigma=0.000672 ! Fit after self-cal, rms=0.057073Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304265 Jy ! Component: 100 - total flux cleaned = 0.000432995 Jy ! Component: 150 - total flux cleaned = 0.000460434 Jy ! Component: 200 - total flux cleaned = 0.000436869 Jy ! Total flux subtracted in 200 components = 0.000436869 Jy ! Clean residual min=-0.003481 max=0.003569 Jy/beam ! Clean residual mean=0.000009 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.247681 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.247681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057034Jy sigma=0.000671 ! Fit after self-cal, rms=0.057029Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=7.205 mas, bpa=3.194 degrees ! Estimated noise=1031.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.417 x 7.205 at 3.194 degrees (North through East) ! Clean map min=-0.0037413 max=0.19889 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=6.356 mas, bpa=-0.06464 degrees ! Estimated noise=1234.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158837 Jy ! Component: 100 - total flux cleaned = 0.199421 Jy ! Component: 150 - total flux cleaned = 0.21743 Jy ! Component: 200 - total flux cleaned = 0.228162 Jy ! Total flux subtracted in 200 components = 0.228162 Jy ! Clean residual min=-0.004711 max=0.005704 Jy/beam ! Clean residual mean=0.000002 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.228162 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.228162 Jy ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=7.205 mas, bpa=3.194 degrees ! Estimated noise=1031.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00881267 Jy ! Component: 100 - total flux cleaned = 0.0141904 Jy ! Component: 150 - total flux cleaned = 0.0157565 Jy ! Component: 200 - total flux cleaned = 0.0166569 Jy ! Total flux subtracted in 200 components = 0.0166569 Jy ! Clean residual min=-0.003443 max=0.003600 Jy/beam ! Clean residual mean=0.000003 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.244819 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 0.244819 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=10.86 mas, bpa=-0.6839 degrees ! Estimated noise=1293.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138764 Jy ! Component: 100 - total flux cleaned = 0.00185012 Jy ! Component: 150 - total flux cleaned = 0.00224118 Jy ! Component: 200 - total flux cleaned = 0.00246573 Jy ! Total flux subtracted in 200 components = 0.00246573 Jy ! Clean residual min=-0.003636 max=0.003786 Jy/beam ! Clean residual mean=0.000009 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.247285 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157889 Jy ! Component: 100 - total flux cleaned = 0.000328918 Jy ! Component: 150 - total flux cleaned = 0.000388952 Jy ! Component: 200 - total flux cleaned = 0.000443851 Jy ! Total flux subtracted in 200 components = 0.000443851 Jy ! Clean residual min=-0.003562 max=0.003742 Jy/beam ! Clean residual mean=0.000009 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.247728 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 80 components and 0.247728 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=7.205 mas, bpa=3.194 degrees ! Estimated noise=1031.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444858 Jy ! Component: 100 - total flux cleaned = -0.000551233 Jy ! Component: 150 - total flux cleaned = -0.000551764 Jy ! Component: 200 - total flux cleaned = -0.000551155 Jy ! Total flux subtracted in 200 components = -0.000551155 Jy ! Clean residual min=-0.003302 max=0.003070 Jy/beam ! Clean residual mean=0.000004 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.247177 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 93 components and 0.247177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056877Jy sigma=0.000668 ! Fit after self-cal, rms=0.056869Jy sigma=0.000668 wmodel J0345+1453_S_2017_05_27_pus_map.mod ! Writing 93 model components to file: J0345+1453_S_2017_05_27_pus_map.mod wobs J0345+1453_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0345+1453_S_2017_05_27_pus_uvs.fits wwins J0345+1453_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0345+1453_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000786953 Jy ! Component: 100 - total flux cleaned = -0.00116786 Jy ! Component: 150 - total flux cleaned = -0.00142744 Jy ! Component: 200 - total flux cleaned = -0.0016255 Jy ! Component: 250 - total flux cleaned = -0.0017694 Jy ! Component: 300 - total flux cleaned = -0.0019538 Jy ! Component: 350 - total flux cleaned = -0.00204305 Jy ! Component: 400 - total flux cleaned = -0.00217417 Jy ! Component: 450 - total flux cleaned = -0.00230104 Jy ! Component: 500 - total flux cleaned = -0.0023422 Jy ! Component: 550 - total flux cleaned = -0.00246307 Jy ! Component: 600 - total flux cleaned = -0.0025809 Jy ! Component: 650 - total flux cleaned = -0.00277241 Jy ! Component: 700 - total flux cleaned = -0.00273428 Jy ! Component: 750 - total flux cleaned = -0.00280772 Jy ! Component: 800 - total flux cleaned = -0.00284387 Jy ! Component: 850 - total flux cleaned = -0.0029144 Jy ! Component: 900 - total flux cleaned = -0.00294915 Jy ! Component: 950 - total flux cleaned = -0.00305045 Jy ! Component: 1000 - total flux cleaned = -0.00298351 Jy ! Component: 1050 - total flux cleaned = -0.00311545 Jy ! Component: 1100 - total flux cleaned = -0.00305047 Jy ! Component: 1150 - total flux cleaned = -0.00308174 Jy ! Component: 1200 - total flux cleaned = -0.00295698 Jy ! Component: 1250 - total flux cleaned = -0.00301877 Jy ! Component: 1300 - total flux cleaned = -0.00298807 Jy ! Component: 1350 - total flux cleaned = -0.00289851 Jy ! Component: 1400 - total flux cleaned = -0.00298622 Jy ! Component: 1450 - total flux cleaned = -0.00295668 Jy ! Component: 1500 - total flux cleaned = -0.00301395 Jy ! Component: 1550 - total flux cleaned = -0.0030135 Jy ! Component: 1600 - total flux cleaned = -0.00295832 Jy ! Component: 1650 - total flux cleaned = -0.00301356 Jy ! Component: 1700 - total flux cleaned = -0.00309426 Jy ! Component: 1750 - total flux cleaned = -0.00306753 Jy ! Component: 1800 - total flux cleaned = -0.00304139 Jy ! Component: 1850 - total flux cleaned = -0.00306689 Jy ! Component: 1900 - total flux cleaned = -0.00298998 Jy ! Component: 1950 - total flux cleaned = -0.00299003 Jy ! Component: 2000 - total flux cleaned = -0.00301476 Jy ! Component: 2050 - total flux cleaned = -0.00296534 Jy ! Component: 2100 - total flux cleaned = -0.00303861 Jy ! Component: 2150 - total flux cleaned = -0.00291816 Jy ! Component: 2200 - total flux cleaned = -0.00294188 Jy ! Component: 2250 - total flux cleaned = -0.00282371 Jy ! Component: 2300 - total flux cleaned = -0.00280065 Jy ! Component: 2350 - total flux cleaned = -0.0027778 Jy ! Component: 2400 - total flux cleaned = -0.00270972 Jy ! Component: 2450 - total flux cleaned = -0.00266473 Jy ! Component: 2500 - total flux cleaned = -0.00270925 Jy ! Component: 2550 - total flux cleaned = -0.00262041 Jy ! Component: 2600 - total flux cleaned = -0.00255491 Jy ! Component: 2650 - total flux cleaned = -0.00244648 Jy ! Component: 2700 - total flux cleaned = -0.00244694 Jy ! Component: 2750 - total flux cleaned = -0.0023619 Jy ! Component: 2800 - total flux cleaned = -0.00234045 Jy ! Component: 2850 - total flux cleaned = -0.00234064 Jy ! Component: 2900 - total flux cleaned = -0.00225782 Jy ! Component: 2950 - total flux cleaned = -0.00213544 Jy ! Component: 3000 - total flux cleaned = -0.00211539 Jy ! Component: 3050 - total flux cleaned = -0.00199502 Jy ! Component: 3100 - total flux cleaned = -0.00209447 Jy ! Component: 3150 - total flux cleaned = -0.00197571 Jy ! Component: 3200 - total flux cleaned = -0.00197597 Jy ! Component: 3250 - total flux cleaned = -0.00193727 Jy ! Component: 3300 - total flux cleaned = -0.00195655 Jy ! Component: 3350 - total flux cleaned = -0.00191858 Jy ! Component: 3400 - total flux cleaned = -0.00188105 Jy ! Component: 3450 - total flux cleaned = -0.00180598 Jy ! Component: 3500 - total flux cleaned = -0.00180627 Jy ! Component: 3550 - total flux cleaned = -0.00182491 Jy ! Component: 3600 - total flux cleaned = -0.00173353 Jy ! Component: 3650 - total flux cleaned = -0.00173349 Jy ! Component: 3700 - total flux cleaned = -0.00175159 Jy ! Component: 3750 - total flux cleaned = -0.00164404 Jy ! Component: 3800 - total flux cleaned = -0.00167972 Jy ! Component: 3850 - total flux cleaned = -0.001662 Jy ! Component: 3900 - total flux cleaned = -0.00160961 Jy ! Component: 3950 - total flux cleaned = -0.00159218 Jy ! Component: 4000 - total flux cleaned = -0.00148896 Jy ! Component: 4050 - total flux cleaned = -0.00147183 Jy ! Total flux subtracted in 4096 components = -0.00143783 Jy ! Clean residual min=-0.000932 max=0.000921 Jy/beam ! Clean residual mean=0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.245739 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 370 components and 0.245739 Jy ![Exited script file: muppet] wmap "J0345+1453_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.417 x 7.205 at 3.194 degrees (North through East) ! Clean map min=-0.0023118 max=0.19814 Jy/beam ! Writing clean map to FITS file: J0345+1453_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.198144 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0003141 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.475562 0.475562 0.951124 1.90225 3.8045 7.60899 15.218 30.436 60.8719 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.198 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.417 x 7.205 at 3.194 degrees (North through East) ! Clean map min=-0.0023118 max=0.19814 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0345+1453_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:56:22 2019