! Started logfile: J0340+5405_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:57 2019 obs J0340+5405_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0340+5405_S_2017_10_09_pus_uva.fits ! AN table 1: 293 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.596701 visibilities/baseline/integration-bin. ! Found source: J0340+5405 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 25176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0340+5405_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 741 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 763 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 614 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1793 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992716Jy sigma=0.009719 ! Fit after self-cal, rms=0.959017Jy sigma=0.009396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=5.188 mas, bpa=-11.56 degrees ! Estimated noise=1128.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310987 Jy ! Component: 100 - total flux cleaned = 0.03871 Jy ! Total flux subtracted in 100 components = 0.03871 Jy ! Clean residual min=-0.003490 max=0.003570 Jy/beam ! Clean residual mean=0.000000 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.03871 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.03871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070991Jy sigma=0.000633 ! Fit after self-cal, rms=0.069856Jy sigma=0.000622 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.038 mas, bmaj=6.1 mas, bpa=-12.26 degrees ! Estimated noise=545.339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665567 Jy ! Component: 100 - total flux cleaned = 0.00967937 Jy ! Component: 150 - total flux cleaned = 0.0114185 Jy ! Component: 200 - total flux cleaned = 0.0124503 Jy ! Total flux subtracted in 200 components = 0.0124503 Jy ! Clean residual min=-0.001897 max=0.002414 Jy/beam ! Clean residual mean=-0.000037 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0511603 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.0511603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069186Jy sigma=0.000617 ! Fit after self-cal, rms=0.069066Jy sigma=0.000616 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.10 KP 1.02 ! LA 0.96 MK 1.02 NL 0.94 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00 HN 1.14 KP 1.02 ! LA 0.94 MK 1.01 NL 1.27 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.09 KP 0.92 ! LA 0.79 MK 1.05 NL 1.11 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 192 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.86 KP 1.00* ! LA 0.98 MK 0.84 NL 1.00* OV 1.00* ! PT 0.87 ! ! ! Fit before self-cal, rms=0.069066Jy sigma=0.000616 ! Fit after self-cal, rms=0.068837Jy sigma=0.000615 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.058 mas, bmaj=6.16 mas, bpa=-11.41 degrees ! Estimated noise=549.482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332557 Jy ! Component: 100 - total flux cleaned = 0.000312251 Jy ! Component: 150 - total flux cleaned = 0.000312446 Jy ! Component: 200 - total flux cleaned = 0.000313245 Jy ! Total flux subtracted in 200 components = 0.000313245 Jy ! Clean residual min=-0.001478 max=0.002051 Jy/beam ! Clean residual mean=-0.000028 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0514735 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0514735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068825Jy sigma=0.000615 ! Fit after self-cal, rms=0.068796Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068796Jy sigma=0.000614 ! Fit after self-cal, rms=0.066800Jy sigma=0.000613 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.079 mas, bmaj=6.165 mas, bpa=-11.16 degrees ! Estimated noise=548.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420716 Jy ! Component: 100 - total flux cleaned = 0.000485288 Jy ! Component: 150 - total flux cleaned = 0.000520922 Jy ! Component: 200 - total flux cleaned = 0.000535749 Jy ! Total flux subtracted in 200 components = 0.000535749 Jy ! Clean residual min=-0.001306 max=0.001548 Jy/beam ! Clean residual mean=-0.000017 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0520093 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0520093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066789Jy sigma=0.000613 ! Fit after self-cal, rms=0.066775Jy sigma=0.000612 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138147 Jy ! Component: 100 - total flux cleaned = 0.00148053 Jy ! Component: 150 - total flux cleaned = 0.00153361 Jy ! Component: 200 - total flux cleaned = 0.00151302 Jy ! Total flux subtracted in 200 components = 0.00151302 Jy ! Clean residual min=-0.001293 max=0.001425 Jy/beam ! Clean residual mean=-0.000015 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0535223 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.0535223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066739Jy sigma=0.000612 ! Fit after self-cal, rms=0.066727Jy sigma=0.000611 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066727Jy sigma=0.000611 ! Fit after self-cal, rms=0.066342Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=6.144 mas, bpa=-11.28 degrees ! Estimated noise=545.746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010973 Jy ! Component: 100 - total flux cleaned = 0.00126576 Jy ! Component: 150 - total flux cleaned = 0.00130873 Jy ! Component: 200 - total flux cleaned = 0.00136504 Jy ! Total flux subtracted in 200 components = 0.00136504 Jy ! Clean residual min=-0.001243 max=0.001410 Jy/beam ! Clean residual mean=-0.000011 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0548873 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 71 components and 0.0548873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066318Jy sigma=0.000611 ! Fit after self-cal, rms=0.066306Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (121, -70). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127164 Jy ! Component: 100 - total flux cleaned = 0.0014291 Jy ! Component: 150 - total flux cleaned = 0.00151011 Jy ! Component: 200 - total flux cleaned = 0.00158237 Jy ! Total flux subtracted in 200 components = 0.00158237 Jy ! Clean residual min=-0.001216 max=0.001192 Jy/beam ! Clean residual mean=-0.000011 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.0564697 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 0.0564697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066271Jy sigma=0.000611 ! Fit after self-cal, rms=0.066248Jy sigma=0.000610 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066248Jy sigma=0.000610 ! Fit after self-cal, rms=0.065882Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.912 mas, bmaj=9.539 mas, bpa=51.74 degrees ! Estimated noise=661.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116484 Jy ! Component: 100 - total flux cleaned = 0.00185217 Jy ! Component: 150 - total flux cleaned = 0.00207157 Jy ! Component: 200 - total flux cleaned = 0.00213842 Jy ! Total flux subtracted in 200 components = 0.00213842 Jy ! Clean residual min=-0.001339 max=0.001223 Jy/beam ! Clean residual mean=-0.000021 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.0586081 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 124 components and 0.0586081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065865Jy sigma=0.000610 ! Fit after self-cal, rms=0.065854Jy sigma=0.000610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065396 Jy ! Component: 100 - total flux cleaned = 0.000792556 Jy ! Component: 150 - total flux cleaned = 0.00079205 Jy ! Component: 200 - total flux cleaned = 0.00079209 Jy ! Total flux subtracted in 200 components = 0.00079209 Jy ! Clean residual min=-0.001349 max=0.001225 Jy/beam ! Clean residual mean=-0.000019 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.0594002 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 145 components and 0.0594002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065843Jy sigma=0.000610 ! Fit after self-cal, rms=0.065838Jy sigma=0.000610 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.037 mas, bmaj=6.128 mas, bpa=-11.5 degrees ! Estimated noise=543.808 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.037 x 6.128 at -11.5 degrees (North through East) ! Clean map min=-0.0011406 max=0.042064 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=5.16 mas, bpa=-11.71 degrees ! Estimated noise=1102.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031072 Jy ! Component: 100 - total flux cleaned = 0.039403 Jy ! Component: 150 - total flux cleaned = 0.044472 Jy ! Component: 200 - total flux cleaned = 0.048192 Jy ! Total flux subtracted in 200 components = 0.048192 Jy ! Clean residual min=-0.002827 max=0.002972 Jy/beam ! Clean residual mean=-0.000002 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.048192 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.048192 Jy ! Inverting map and beam ! Estimated beam: bmin=4.037 mas, bmaj=6.128 mas, bpa=-11.5 degrees ! Estimated noise=543.808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397299 Jy ! Component: 100 - total flux cleaned = 0.00649425 Jy ! Component: 150 - total flux cleaned = 0.00831682 Jy ! Component: 200 - total flux cleaned = 0.00953592 Jy ! Total flux subtracted in 200 components = 0.00953592 Jy ! Clean residual min=-0.001402 max=0.001337 Jy/beam ! Clean residual mean=-0.000016 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0577279 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.0577279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.912 mas, bmaj=9.539 mas, bpa=51.74 degrees ! Estimated noise=661.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126308 Jy ! Component: 100 - total flux cleaned = 0.00164105 Jy ! Component: 150 - total flux cleaned = 0.00177952 Jy ! Component: 200 - total flux cleaned = 0.00185094 Jy ! Total flux subtracted in 200 components = 0.00185094 Jy ! Clean residual min=-0.001505 max=0.001268 Jy/beam ! Clean residual mean=-0.000019 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0595788 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.42166e-05 Jy ! Component: 100 - total flux cleaned = 0.000121242 Jy ! Component: 150 - total flux cleaned = 0.000171506 Jy ! Component: 200 - total flux cleaned = 0.000171191 Jy ! Total flux subtracted in 200 components = 0.000171191 Jy ! Clean residual min=-0.001439 max=0.001235 Jy/beam ! Clean residual mean=-0.000017 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.05975 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 85 components and 0.05975 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.037 mas, bmaj=6.128 mas, bpa=-11.5 degrees ! Estimated noise=543.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020853 Jy ! Component: 100 - total flux cleaned = -0.000181647 Jy ! Component: 150 - total flux cleaned = -0.000157392 Jy ! Component: 200 - total flux cleaned = -0.000136026 Jy ! Total flux subtracted in 200 components = -0.000136026 Jy ! Clean residual min=-0.001174 max=0.001174 Jy/beam ! Clean residual mean=-0.000008 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.059614 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.059614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065832Jy sigma=0.000610 ! Fit after self-cal, rms=0.065828Jy sigma=0.000610 wmodel J0340+5405_S_2017_10_09_pus_map.mod ! Writing 104 model components to file: J0340+5405_S_2017_10_09_pus_map.mod wobs J0340+5405_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0340+5405_S_2017_10_09_pus_uvs.fits wwins J0340+5405_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J0340+5405_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.85952e-05 Jy ! Component: 100 - total flux cleaned = 0.000193684 Jy ! Component: 150 - total flux cleaned = 0.000312601 Jy ! Component: 200 - total flux cleaned = 0.00036959 Jy ! Component: 250 - total flux cleaned = 0.00046008 Jy ! Component: 300 - total flux cleaned = 0.000460539 Jy ! Component: 350 - total flux cleaned = 0.000528187 Jy ! Component: 400 - total flux cleaned = 0.000560793 Jy ! Component: 450 - total flux cleaned = 0.000608592 Jy ! Component: 500 - total flux cleaned = 0.000593186 Jy ! Component: 550 - total flux cleaned = 0.000608543 Jy ! Component: 600 - total flux cleaned = 0.000667371 Jy ! Component: 650 - total flux cleaned = 0.000637875 Jy ! Component: 700 - total flux cleaned = 0.000623835 Jy ! Component: 750 - total flux cleaned = 0.000637867 Jy ! Component: 800 - total flux cleaned = 0.000665282 Jy ! Component: 850 - total flux cleaned = 0.000705231 Jy ! Component: 900 - total flux cleaned = 0.000705181 Jy ! Component: 950 - total flux cleaned = 0.000718291 Jy ! Component: 1000 - total flux cleaned = 0.000807212 Jy ! Component: 1050 - total flux cleaned = 0.000819727 Jy ! Component: 1100 - total flux cleaned = 0.000856624 Jy ! Component: 1150 - total flux cleaned = 0.000880979 Jy ! Component: 1200 - total flux cleaned = 0.000881024 Jy ! Component: 1250 - total flux cleaned = 0.000869536 Jy ! Component: 1300 - total flux cleaned = 0.000869608 Jy ! Component: 1350 - total flux cleaned = 0.000835187 Jy ! Component: 1400 - total flux cleaned = 0.000824032 Jy ! Component: 1450 - total flux cleaned = 0.000801834 Jy ! Component: 1500 - total flux cleaned = 0.00078 Jy ! Component: 1550 - total flux cleaned = 0.00074742 Jy ! Component: 1600 - total flux cleaned = 0.000768954 Jy ! Component: 1650 - total flux cleaned = 0.000747585 Jy ! Component: 1700 - total flux cleaned = 0.00071604 Jy ! Component: 1750 - total flux cleaned = 0.000695125 Jy ! Component: 1800 - total flux cleaned = 0.000674552 Jy ! Component: 1850 - total flux cleaned = 0.000674547 Jy ! Component: 1900 - total flux cleaned = 0.000664496 Jy ! Component: 1950 - total flux cleaned = 0.000704679 Jy ! Component: 2000 - total flux cleaned = 0.000664805 Jy ! Component: 2050 - total flux cleaned = 0.000635186 Jy ! Component: 2100 - total flux cleaned = 0.000664536 Jy ! Component: 2150 - total flux cleaned = 0.000635525 Jy ! Component: 2200 - total flux cleaned = 0.000616427 Jy ! Component: 2250 - total flux cleaned = 0.000607117 Jy ! Component: 2300 - total flux cleaned = 0.00061669 Jy ! Component: 2350 - total flux cleaned = 0.000607351 Jy ! Component: 2400 - total flux cleaned = 0.00059801 Jy ! Component: 2450 - total flux cleaned = 0.000616501 Jy ! Component: 2500 - total flux cleaned = 0.000634688 Jy ! Component: 2550 - total flux cleaned = 0.000652735 Jy ! Component: 2600 - total flux cleaned = 0.000625829 Jy ! Component: 2650 - total flux cleaned = 0.000643665 Jy ! Component: 2700 - total flux cleaned = 0.000643542 Jy ! Component: 2750 - total flux cleaned = 0.000643515 Jy ! Component: 2800 - total flux cleaned = 0.000652253 Jy ! Component: 2850 - total flux cleaned = 0.000678151 Jy ! Component: 2900 - total flux cleaned = 0.00066101 Jy ! Component: 2950 - total flux cleaned = 0.000652535 Jy ! Component: 3000 - total flux cleaned = 0.000669268 Jy ! Component: 3050 - total flux cleaned = 0.00066931 Jy ! Component: 3100 - total flux cleaned = 0.000685914 Jy ! Component: 3150 - total flux cleaned = 0.000702257 Jy ! Component: 3200 - total flux cleaned = 0.000669729 Jy ! Component: 3250 - total flux cleaned = 0.000742548 Jy ! Component: 3300 - total flux cleaned = 0.00069433 Jy ! Component: 3350 - total flux cleaned = 0.000726291 Jy ! Component: 3400 - total flux cleaned = 0.000718357 Jy ! Component: 3450 - total flux cleaned = 0.000726295 Jy ! Component: 3500 - total flux cleaned = 0.000702878 Jy ! Component: 3550 - total flux cleaned = 0.000710623 Jy ! Component: 3600 - total flux cleaned = 0.000718324 Jy ! Component: 3650 - total flux cleaned = 0.000710711 Jy ! Component: 3700 - total flux cleaned = 0.00075635 Jy ! Component: 3750 - total flux cleaned = 0.000748741 Jy ! Component: 3800 - total flux cleaned = 0.00077124 Jy ! Component: 3850 - total flux cleaned = 0.000748862 Jy ! Component: 3900 - total flux cleaned = 0.000748825 Jy ! Component: 3950 - total flux cleaned = 0.000756145 Jy ! Component: 4000 - total flux cleaned = 0.000756147 Jy ! Component: 4050 - total flux cleaned = 0.00074896 Jy ! Total flux subtracted in 4096 components = 0.000741787 Jy ! Clean residual min=-0.000452 max=0.000439 Jy/beam ! Clean residual mean=-0.000004 rms=0.000131 Jy/beam ! Combined flux in latest and established models = 0.0603558 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 380 components and 0.0603558 Jy ![Exited script file: muppet] wmap "J0340+5405_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.037 x 6.128 at -11.5 degrees (North through East) ! Clean map min=-0.0010935 max=0.041458 Jy/beam ! Writing clean map to FITS file: J0340+5405_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0414582 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000129309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.93571 0.93571 1.87142 3.74284 7.48568 14.9714 29.9427 59.8855 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.041 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.037 x 6.128 at -11.5 degrees (North through East) ! Clean map min=-0.0010935 max=0.041458 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0340+5405_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:04:02 2019