! Started logfile: J0339+6008_X_2017_06_10_pus_uvs.log on Mon May 6 12:41:56 2019 obs J0339+6008_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0339+6008_X_2017_06_10_pus_uva.fits ! AN table 1: 152 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.947515 visibilities/baseline/integration-bin. ! Found source: J0339+6008 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 77772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0339+6008_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989942Jy sigma=0.009086 ! Fit after self-cal, rms=0.961178Jy sigma=0.008835 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7949 mas, bmaj=1.029 mas, bpa=-3.055 degrees ! Estimated noise=650.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320543 Jy ! Component: 100 - total flux cleaned = 0.039096 Jy ! Total flux subtracted in 100 components = 0.039096 Jy ! Clean residual min=-0.001813 max=0.002168 Jy/beam ! Clean residual mean=-0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.039096 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.039096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074311Jy sigma=0.000656 ! Fit after self-cal, rms=0.073420Jy sigma=0.000648 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335931 Jy ! Component: 100 - total flux cleaned = 0.00483698 Jy ! Total flux subtracted in 100 components = 0.00483698 Jy ! Clean residual min=-0.001661 max=0.001909 Jy/beam ! Clean residual mean=-0.000002 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0439329 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.0439329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073264Jy sigma=0.000647 ! Fit after self-cal, rms=0.073253Jy sigma=0.000647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.006 mas, bmaj=1.272 mas, bpa=1.437 degrees ! Estimated noise=281.758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209353 Jy ! Component: 100 - total flux cleaned = 0.00323909 Jy ! Component: 150 - total flux cleaned = 0.0039833 Jy ! Component: 200 - total flux cleaned = 0.00436539 Jy ! Total flux subtracted in 200 components = 0.00436539 Jy ! Clean residual min=-0.000861 max=0.000993 Jy/beam ! Clean residual mean=-0.000007 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.0482983 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 34 components and 0.0482983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073193Jy sigma=0.000646 ! Fit after self-cal, rms=0.073167Jy sigma=0.000646 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.03 KP 1.03 ! LA 0.94 MK 1.10 NL 1.02 OV 1.04 ! PT 0.95 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 1.06 KP 0.94 ! LA 0.94 MK 1.02 NL 1.05 OV 1.06 ! PT 1.03 SC 1.15 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.04 KP 0.97 ! LA 1.02 MK 1.06 NL 1.09 OV 1.02 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.00 KP 0.95 ! LA 0.99 MK 1.08 NL 1.03 OV 1.00 ! PT 1.07 SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.98 KP 0.98 ! LA 0.96 MK 1.10 NL 1.06 OV 1.01 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.04 KP 1.02 ! LA 0.98 MK 0.98 NL 1.02 OV 1.09 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.97 KP 0.98 ! LA 1.02 MK 1.03 NL 1.07 OV 1.05 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.91 KP 0.97 ! LA 0.99 MK 1.04 NL 1.00 OV 1.09 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.98 KP 0.96 ! LA 1.01 MK 0.96 NL 1.01 OV 1.06 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.89 KP 0.95 ! LA 1.04 MK 0.97 NL 1.00 OV 1.03 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 0.90 KP 0.99 ! LA 1.03 MK 0.93 NL 0.98 OV 1.01 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.91 HN 0.74 KP 0.93 ! LA 0.95 MK 0.90 NL 1.01 OV 1.00 ! PT 0.89 SC 0.97 ! ! ! Fit before self-cal, rms=0.073167Jy sigma=0.000646 ! Fit after self-cal, rms=0.072213Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.011 mas, bmaj=1.276 mas, bpa=0.9614 degrees ! Estimated noise=283.101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000982778 Jy ! Component: 100 - total flux cleaned = 0.00129182 Jy ! Component: 150 - total flux cleaned = 0.00132361 Jy ! Component: 200 - total flux cleaned = 0.00133729 Jy ! Total flux subtracted in 200 components = 0.00133729 Jy ! Clean residual min=-0.000829 max=0.001037 Jy/beam ! Clean residual mean=-0.000006 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.0496356 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.0496356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072200Jy sigma=0.000645 ! Fit after self-cal, rms=0.072188Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072188Jy sigma=0.000645 ! Fit after self-cal, rms=0.072681Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=1.27 mas, bpa=0.3702 degrees ! Estimated noise=283.767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000731146 Jy ! Component: 100 - total flux cleaned = 0.000875569 Jy ! Component: 150 - total flux cleaned = 0.000899683 Jy ! Component: 200 - total flux cleaned = 0.000909959 Jy ! Total flux subtracted in 200 components = 0.000909959 Jy ! Clean residual min=-0.000703 max=0.000887 Jy/beam ! Clean residual mean=-0.000009 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0505456 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.0505456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072673Jy sigma=0.000644 ! Fit after self-cal, rms=0.072718Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.2, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799829 Jy ! Component: 100 - total flux cleaned = 0.00118631 Jy ! Component: 150 - total flux cleaned = 0.00124523 Jy ! Component: 200 - total flux cleaned = 0.00128413 Jy ! Total flux subtracted in 200 components = 0.00128413 Jy ! Clean residual min=-0.000747 max=0.000713 Jy/beam ! Clean residual mean=-0.000009 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.0518297 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.0518297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072708Jy sigma=0.000644 ! Fit after self-cal, rms=0.072705Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072705Jy sigma=0.000644 ! Fit after self-cal, rms=0.073241Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=1.265 mas, bpa=-0.006342 degrees ! Estimated noise=284.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638539 Jy ! Component: 100 - total flux cleaned = 0.000951783 Jy ! Component: 150 - total flux cleaned = 0.00111757 Jy ! Component: 200 - total flux cleaned = 0.00117074 Jy ! Total flux subtracted in 200 components = 0.00117074 Jy ! Clean residual min=-0.000714 max=0.000729 Jy/beam ! Clean residual mean=-0.000010 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.0530005 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 0.0530005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073234Jy sigma=0.000644 ! Fit after self-cal, rms=0.073256Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377417 Jy ! Component: 100 - total flux cleaned = 0.000428237 Jy ! Component: 150 - total flux cleaned = 0.000449015 Jy ! Component: 200 - total flux cleaned = 0.000468589 Jy ! Total flux subtracted in 200 components = 0.000468589 Jy ! Clean residual min=-0.000734 max=0.000736 Jy/beam ! Clean residual mean=-0.000010 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.0534691 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.0534691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073252Jy sigma=0.000643 ! Fit after self-cal, rms=0.073251Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073251Jy sigma=0.000643 ! Fit after self-cal, rms=0.073529Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.313 mas, bmaj=2.404 mas, bpa=25.61 degrees ! Estimated noise=371.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005466 Jy ! Component: 100 - total flux cleaned = 0.000810759 Jy ! Component: 150 - total flux cleaned = 0.000958127 Jy ! Component: 200 - total flux cleaned = 0.000994488 Jy ! Total flux subtracted in 200 components = 0.000994488 Jy ! Clean residual min=-0.000991 max=0.000875 Jy/beam ! Clean residual mean=-0.000024 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0544636 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.0544636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073528Jy sigma=0.000643 ! Fit after self-cal, rms=0.073534Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194657 Jy ! Component: 100 - total flux cleaned = 0.000254712 Jy ! Component: 150 - total flux cleaned = 0.000264903 Jy ! Component: 200 - total flux cleaned = 0.000252049 Jy ! Total flux subtracted in 200 components = 0.000252049 Jy ! Clean residual min=-0.000994 max=0.000863 Jy/beam ! Clean residual mean=-0.000024 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0547156 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 90 components and 0.0547156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073534Jy sigma=0.000643 ! Fit after self-cal, rms=0.073534Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.006 mas, bmaj=1.261 mas, bpa=-0.2577 degrees ! Estimated noise=285.276 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.006 x 1.261 at -0.2577 degrees (North through East) ! Clean map min=-0.00068576 max=0.041844 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7898 mas, bmaj=1.021 mas, bpa=-4.478 degrees ! Estimated noise=646.699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032927 Jy ! Component: 100 - total flux cleaned = 0.0408164 Jy ! Component: 150 - total flux cleaned = 0.0448178 Jy ! Component: 200 - total flux cleaned = 0.0474843 Jy ! Total flux subtracted in 200 components = 0.0474843 Jy ! Clean residual min=-0.001572 max=0.002005 Jy/beam ! Clean residual mean=-0.000004 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0474843 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0474843 Jy ! Inverting map and beam ! Estimated beam: bmin=1.006 mas, bmaj=1.261 mas, bpa=-0.2577 degrees ! Estimated noise=285.276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261318 Jy ! Component: 100 - total flux cleaned = 0.00407816 Jy ! Component: 150 - total flux cleaned = 0.0050709 Jy ! Component: 200 - total flux cleaned = 0.00571861 Jy ! Total flux subtracted in 200 components = 0.00571861 Jy ! Clean residual min=-0.000741 max=0.000739 Jy/beam ! Clean residual mean=-0.000011 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.053203 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.053203 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.313 mas, bmaj=2.404 mas, bpa=25.61 degrees ! Estimated noise=371.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813226 Jy ! Component: 100 - total flux cleaned = 0.00121889 Jy ! Component: 150 - total flux cleaned = 0.00137694 Jy ! Component: 200 - total flux cleaned = 0.00149674 Jy ! Total flux subtracted in 200 components = 0.00149674 Jy ! Clean residual min=-0.001000 max=0.000869 Jy/beam ! Clean residual mean=-0.000023 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.0546997 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.43756e-05 Jy ! Component: 100 - total flux cleaned = 8.19451e-05 Jy ! Component: 150 - total flux cleaned = 0.000103752 Jy ! Component: 200 - total flux cleaned = 0.000118238 Jy ! Total flux subtracted in 200 components = 0.000118238 Jy ! Clean residual min=-0.000998 max=0.000863 Jy/beam ! Clean residual mean=-0.000023 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0548179 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 68 components and 0.0548179 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.006 mas, bmaj=1.261 mas, bpa=-0.2577 degrees ! Estimated noise=285.276 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112337 Jy ! Component: 100 - total flux cleaned = -0.000189597 Jy ! Component: 150 - total flux cleaned = -0.000190101 Jy ! Component: 200 - total flux cleaned = -0.00020081 Jy ! Total flux subtracted in 200 components = -0.00020081 Jy ! Clean residual min=-0.000745 max=0.000711 Jy/beam ! Clean residual mean=-0.000010 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0546171 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.0546171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073535Jy sigma=0.000643 ! Fit after self-cal, rms=0.073533Jy sigma=0.000643 wmodel J0339+6008_X_2017_06_10_pus_map.mod ! Writing 86 model components to file: J0339+6008_X_2017_06_10_pus_map.mod wobs J0339+6008_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0339+6008_X_2017_06_10_pus_uvs.fits wwins J0339+6008_X_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J0339+6008_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216579 Jy ! Component: 100 - total flux cleaned = -0.000447037 Jy ! Component: 150 - total flux cleaned = -0.000642557 Jy ! Component: 200 - total flux cleaned = -0.000807393 Jy ! Component: 250 - total flux cleaned = -0.000924402 Jy ! Component: 300 - total flux cleaned = -0.00105913 Jy ! Component: 350 - total flux cleaned = -0.00117031 Jy ! Component: 400 - total flux cleaned = -0.00123981 Jy ! Component: 450 - total flux cleaned = -0.00130783 Jy ! Component: 500 - total flux cleaned = -0.00134605 Jy ! Component: 550 - total flux cleaned = -0.00139316 Jy ! Component: 600 - total flux cleaned = -0.0014397 Jy ! Component: 650 - total flux cleaned = -0.00150364 Jy ! Component: 700 - total flux cleaned = -0.00154857 Jy ! Component: 750 - total flux cleaned = -0.00159294 Jy ! Component: 800 - total flux cleaned = -0.00162792 Jy ! Component: 850 - total flux cleaned = -0.00165381 Jy ! Component: 900 - total flux cleaned = -0.00167094 Jy ! Component: 950 - total flux cleaned = -0.00171322 Jy ! Component: 1000 - total flux cleaned = -0.00174648 Jy ! Component: 1050 - total flux cleaned = -0.00176312 Jy ! Component: 1100 - total flux cleaned = -0.00180391 Jy ! Component: 1150 - total flux cleaned = -0.00182006 Jy ! Component: 1200 - total flux cleaned = -0.00184398 Jy ! Component: 1250 - total flux cleaned = -0.00186762 Jy ! Component: 1300 - total flux cleaned = -0.00185978 Jy ! Component: 1350 - total flux cleaned = -0.00186764 Jy ! Component: 1400 - total flux cleaned = -0.00188305 Jy ! Component: 1450 - total flux cleaned = -0.00187545 Jy ! Component: 1500 - total flux cleaned = -0.00189812 Jy ! Component: 1550 - total flux cleaned = -0.00188314 Jy ! Component: 1600 - total flux cleaned = -0.001883 Jy ! Component: 1650 - total flux cleaned = -0.00190515 Jy ! Component: 1700 - total flux cleaned = -0.00189783 Jy ! Component: 1750 - total flux cleaned = -0.0018906 Jy ! Component: 1800 - total flux cleaned = -0.00191222 Jy ! Component: 1850 - total flux cleaned = -0.00193352 Jy ! Component: 1900 - total flux cleaned = -0.00189115 Jy ! Component: 1950 - total flux cleaned = -0.00191935 Jy ! Component: 2000 - total flux cleaned = -0.0019472 Jy ! Total flux subtracted in 2048 components = -0.00195409 Jy ! Clean residual min=-0.000373 max=0.000375 Jy/beam ! Clean residual mean=-0.000006 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.052663 Jy keep ! Adding 161 model components to the UV plane model. ! The established model now contains 247 components and 0.052663 Jy ![Exited script file: muppet] wmap "J0339+6008_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.006 x 1.261 at -0.2577 degrees (North through East) ! Clean map min=-0.00064011 max=0.041649 Jy/beam ! Writing clean map to FITS file: J0339+6008_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0416487 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000129569 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.933297 0.933297 1.86659 3.73319 7.46638 14.9328 29.8655 59.731 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.041 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.006 x 1.261 at -0.2577 degrees (North through East) ! Clean map min=-0.00064011 max=0.041649 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0339+6008_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:42:01 2019