! Started logfile: J0334-4008_S_2017_10_21_pus_uvs.log on Sat May 11 20:49:29 2019 obs J0334-4008_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_10_21_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.254274 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.482549Jy sigma=0.002942 ! Fit after self-cal, rms=0.310639Jy sigma=0.001710 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.119 mas, bmaj=93.66 mas, bpa=-8.597 degrees ! Estimated noise=8639.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.892983 Jy ! Component: 100 - total flux cleaned = 1.10167 Jy ! Total flux subtracted in 100 components = 1.10167 Jy ! Clean residual min=-0.107599 max=0.103721 Jy/beam ! Clean residual mean=0.002463 rms=0.039174 Jy/beam ! Combined flux in latest and established models = 1.10167 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.10167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221266Jy sigma=0.001153 ! Fit after self-cal, rms=0.218773Jy sigma=0.001132 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.01 mas, bmaj=87.94 mas, bpa=-7.766 degrees ! Estimated noise=6952.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0624561 Jy ! Component: 100 - total flux cleaned = 0.0691532 Jy ! Component: 150 - total flux cleaned = 0.0670071 Jy ! Component: 200 - total flux cleaned = 0.0603735 Jy ! Total flux subtracted in 200 components = 0.0603735 Jy ! Clean residual min=-0.017271 max=0.017491 Jy/beam ! Clean residual mean=0.000299 rms=0.007207 Jy/beam ! Combined flux in latest and established models = 1.16204 Jy ! Performing phase self-cal ! Adding 99 model components to the UV plane model. ! The established model now contains 110 components and 1.16204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166543Jy sigma=0.000895 ! Fit after self-cal, rms=0.166253Jy sigma=0.000895 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.03 ! LA 1.06 MK 1.00* NL 1.00* OV 1.01 ! PT 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00 ! LA 1.05 MK 1.00* NL 1.00* OV 1.02 ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.99 ! LA 0.82 MK 1.00* NL 1.06 OV 0.94 ! PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.166253Jy sigma=0.000895 ! Fit after self-cal, rms=0.099912Jy sigma=0.000598 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.02 mas, bmaj=87.95 mas, bpa=-7.588 degrees ! Estimated noise=7005.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00637741 Jy ! Component: 100 - total flux cleaned = -0.00599487 Jy ! Component: 150 - total flux cleaned = -0.00674423 Jy ! Component: 200 - total flux cleaned = -0.00673615 Jy ! Total flux subtracted in 200 components = -0.00673615 Jy ! Clean residual min=-0.007170 max=0.007354 Jy/beam ! Clean residual mean=0.000062 rms=0.002596 Jy/beam ! Combined flux in latest and established models = 1.1553 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 162 components and 1.1553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097805Jy sigma=0.000590 ! Fit after self-cal, rms=0.097666Jy sigma=0.000589 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097666Jy sigma=0.000589 ! Fit after self-cal, rms=0.097853Jy sigma=0.000588 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=87.98 mas, bpa=-7.56 degrees ! Estimated noise=7016.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000884239 Jy ! Component: 100 - total flux cleaned = -0.000348255 Jy ! Component: 150 - total flux cleaned = 0.000107129 Jy ! Component: 200 - total flux cleaned = -0.000306936 Jy ! Total flux subtracted in 200 components = -0.000306936 Jy ! Clean residual min=-0.002236 max=0.002208 Jy/beam ! Clean residual mean=0.000009 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 1.155 Jy selfcal ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 237 components and 1.155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097008Jy sigma=0.000584 ! Fit after self-cal, rms=0.097023Jy sigma=0.000584 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000776574 Jy ! Component: 100 - total flux cleaned = -0.00126588 Jy ! Component: 150 - total flux cleaned = -0.001803 Jy ! Component: 200 - total flux cleaned = -0.00274647 Jy ! Total flux subtracted in 200 components = -0.00274647 Jy ! Clean residual min=-0.001408 max=0.001415 Jy/beam ! Clean residual mean=0.000005 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 1.15225 Jy ! Performing phase self-cal ! Adding 95 model components to the UV plane model. ! The established model now contains 329 components and 1.15225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096814Jy sigma=0.000583 ! Fit after self-cal, rms=0.096819Jy sigma=0.000583 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096819Jy sigma=0.000583 ! Fit after self-cal, rms=0.096857Jy sigma=0.000583 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=87.98 mas, bpa=-7.555 degrees ! Estimated noise=7016.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114927 Jy ! Component: 100 - total flux cleaned = -0.00129675 Jy ! Component: 150 - total flux cleaned = -0.00137698 Jy ! Component: 200 - total flux cleaned = -0.00145587 Jy ! Total flux subtracted in 200 components = -0.00145587 Jy ! Clean residual min=-0.001324 max=0.001309 Jy/beam ! Clean residual mean=0.000006 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 1.15079 Jy selfcal ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 400 components and 1.15079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096775Jy sigma=0.000583 ! Fit after self-cal, rms=0.096770Jy sigma=0.000583 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.98188e-05 Jy ! Component: 100 - total flux cleaned = 0.000141896 Jy ! Component: 150 - total flux cleaned = 0.000209876 Jy ! Component: 200 - total flux cleaned = -2.63046e-06 Jy ! Total flux subtracted in 200 components = -2.63046e-06 Jy ! Clean residual min=-0.001164 max=0.001160 Jy/beam ! Clean residual mean=0.000017 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 1.15079 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 464 components and 1.15079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096711Jy sigma=0.000583 ! Fit after self-cal, rms=0.096710Jy sigma=0.000582 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096710Jy sigma=0.000582 ! Fit after self-cal, rms=0.096628Jy sigma=0.000582 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.21 mas, bmaj=87.33 mas, bpa=-7.126 degrees ! Estimated noise=6984.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269692 Jy ! Component: 100 - total flux cleaned = -0.00046839 Jy ! Component: 150 - total flux cleaned = -0.000624018 Jy ! Component: 200 - total flux cleaned = -0.000795247 Jy ! Total flux subtracted in 200 components = -0.000795247 Jy ! Clean residual min=-0.000938 max=0.000959 Jy/beam ! Clean residual mean=0.000003 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 1.15 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 520 components and 1.15 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096594Jy sigma=0.000582 ! Fit after self-cal, rms=0.096590Jy sigma=0.000582 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238063 Jy ! Component: 100 - total flux cleaned = -0.000505103 Jy ! Component: 150 - total flux cleaned = -0.00081821 Jy ! Component: 200 - total flux cleaned = -0.00122415 Jy ! Total flux subtracted in 200 components = -0.00122415 Jy ! Clean residual min=-0.000688 max=0.000673 Jy/beam ! Clean residual mean=-0.000004 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 1.14877 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 579 components and 1.14877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096563Jy sigma=0.000582 ! Fit after self-cal, rms=0.096564Jy sigma=0.000582 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=87.98 mas, bpa=-7.558 degrees ! Estimated noise=7015.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.04 x 87.98 at -7.558 degrees (North through East) ! Clean map min=-0.025939 max=0.93897 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096564Jy sigma=0.000582 ! Fit after self-cal, rms=0.075638Jy sigma=0.000449 ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=87.99 mas, bpa=-7.555 degrees ! Estimated noise=7016.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401889 Jy ! Component: 100 - total flux cleaned = -0.000891241 Jy ! Component: 150 - total flux cleaned = -0.00119981 Jy ! Component: 200 - total flux cleaned = -0.00139983 Jy ! Total flux subtracted in 200 components = -0.00139983 Jy ! Clean residual min=-0.000555 max=0.000552 Jy/beam ! Clean residual mean=0.000002 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 1.14737 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 662 components and 1.14737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075606Jy sigma=0.000449 ! Fit after self-cal, rms=0.075608Jy sigma=0.000449 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.41704e-05 Jy ! Component: 100 - total flux cleaned = -0.000127439 Jy ! Component: 150 - total flux cleaned = -0.000251932 Jy ! Component: 200 - total flux cleaned = -0.000348247 Jy ! Total flux subtracted in 200 components = -0.000348247 Jy ! Clean residual min=-0.000540 max=0.000545 Jy/beam ! Clean residual mean=-0.000003 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 1.14702 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 728 components and 1.14702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075589Jy sigma=0.000448 ! Fit after self-cal, rms=0.075590Jy sigma=0.000448 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075590Jy sigma=0.000448 ! Fit after self-cal, rms=0.075578Jy sigma=0.000448 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.2 mas, bmaj=94.01 mas, bpa=-8.474 degrees ! Estimated noise=8576.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.875606 Jy ! Component: 100 - total flux cleaned = 1.08308 Jy ! Component: 150 - total flux cleaned = 1.07684 Jy ! Component: 200 - total flux cleaned = 1.08344 Jy ! Total flux subtracted in 200 components = 1.08344 Jy ! Clean residual min=-0.119604 max=0.126465 Jy/beam ! Clean residual mean=0.001222 rms=0.031194 Jy/beam ! Combined flux in latest and established models = 1.08344 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.08344 Jy ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=87.99 mas, bpa=-7.556 degrees ! Estimated noise=7016.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271439 Jy ! Component: 100 - total flux cleaned = 0.0302617 Jy ! Component: 150 - total flux cleaned = 0.0465326 Jy ! Component: 200 - total flux cleaned = 0.0675515 Jy ! Total flux subtracted in 200 components = 0.0675515 Jy ! Clean residual min=-0.096666 max=0.094283 Jy/beam ! Clean residual mean=0.001016 rms=0.024446 Jy/beam ! Combined flux in latest and established models = 1.15099 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 1.15099 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.21 mas, bmaj=87.34 mas, bpa=-7.125 degrees ! Estimated noise=6985.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00922166 Jy ! Component: 100 - total flux cleaned = 0.00922846 Jy ! Component: 150 - total flux cleaned = -0.000822374 Jy ! Component: 200 - total flux cleaned = -0.0175423 Jy ! Total flux subtracted in 200 components = -0.0175423 Jy ! Clean residual min=-0.077909 max=0.077327 Jy/beam ! Clean residual mean=-0.000221 rms=0.021955 Jy/beam ! Combined flux in latest and established models = 1.13345 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0215386 Jy ! Component: 100 - total flux cleaned = -0.0500858 Jy ! Component: 150 - total flux cleaned = -0.0873186 Jy ! Component: 200 - total flux cleaned = -0.112589 Jy ! Total flux subtracted in 200 components = -0.112589 Jy ! Clean residual min=-0.233239 max=0.230163 Jy/beam ! Clean residual mean=-0.000966 rms=0.070138 Jy/beam ! Combined flux in latest and established models = 1.02086 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 90 components and 1.02086 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=87.99 mas, bpa=-7.556 degrees ! Estimated noise=7016.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280879 Jy ! Component: 100 - total flux cleaned = 0.0397154 Jy ! Component: 150 - total flux cleaned = 0.107006 Jy ! Component: 200 - total flux cleaned = 0.177509 Jy ! Total flux subtracted in 200 components = 0.177509 Jy ! Clean residual min=-0.325376 max=0.319738 Jy/beam ! Clean residual mean=0.002602 rms=0.065902 Jy/beam ! Combined flux in latest and established models = 1.19837 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 122 components and 1.19837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292097Jy sigma=0.001843 ! Fit after self-cal, rms=0.272503Jy sigma=0.001681 wmodel J0334-4008_S_2017_10_21_pus_map.mod ! Writing 122 model components to file: J0334-4008_S_2017_10_21_pus_map.mod wobs J0334-4008_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_10_21_pus_uvs.fits wwins J0334-4008_S_2017_10_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0334-4008_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.04 x 87.99 at -7.556 degrees (North through East) ! Clean map min=-0.19032 max=1.0551 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.05514 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.063094 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -17.9391 17.9391 35.8782 71.7563 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.1892 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.04 x 87.99 at -7.556 degrees (North through East) ! Clean map min=-0.19032 max=1.0551 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:49:35 2019