! Started logfile: J0334-4008_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:51 2019 obs J0334-4008_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_10_09_pus_uva.fits ! AN table 1: 41 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.29065 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.458768Jy sigma=0.002550 ! Fit after self-cal, rms=0.428295Jy sigma=0.002363 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=28.32 mas, bpa=-17.79 degrees ! Estimated noise=4683.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.670515 Jy ! Component: 100 - total flux cleaned = 0.912456 Jy ! Total flux subtracted in 100 components = 0.912456 Jy ! Clean residual min=-0.069084 max=0.102925 Jy/beam ! Clean residual mean=-0.001074 rms=0.023461 Jy/beam ! Combined flux in latest and established models = 0.912456 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.912456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347241Jy sigma=0.001838 ! Fit after self-cal, rms=0.347030Jy sigma=0.001837 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.468 mas, bmaj=30.8 mas, bpa=-17.51 degrees ! Estimated noise=3489.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160379 Jy ! Component: 100 - total flux cleaned = 0.246757 Jy ! Component: 150 - total flux cleaned = 0.301541 Jy ! Component: 200 - total flux cleaned = 0.339151 Jy ! Total flux subtracted in 200 components = 0.339151 Jy ! Clean residual min=-0.049145 max=0.045949 Jy/beam ! Clean residual mean=0.000327 rms=0.014448 Jy/beam ! Combined flux in latest and established models = 1.25161 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 95 components and 1.25161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260323Jy sigma=0.001306 ! Fit after self-cal, rms=0.260299Jy sigma=0.001306 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.40 KP 1.04 ! LA 1.03 MK 0.97 NL 1.14 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.30 KP 0.98 ! LA 0.96 MK 1.01 NL 0.98 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.27 KP 0.86 ! LA 0.76 MK 1.02 NL 1.15 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.00* ! LA 3.27 MK 1.07 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.260299Jy sigma=0.001306 ! Fit after self-cal, rms=0.187924Jy sigma=0.000814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=32.06 mas, bpa=-17.89 degrees ! Estimated noise=3637.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00634369 Jy ! Component: 100 - total flux cleaned = -0.00890459 Jy ! Component: 150 - total flux cleaned = -0.00890112 Jy ! Component: 200 - total flux cleaned = -0.0089027 Jy ! Total flux subtracted in 200 components = -0.0089027 Jy ! Clean residual min=-0.030473 max=0.020876 Jy/beam ! Clean residual mean=0.000288 rms=0.007964 Jy/beam ! Combined flux in latest and established models = 1.2427 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 114 components and 1.2427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183289Jy sigma=0.000795 ! Fit after self-cal, rms=0.183725Jy sigma=0.000795 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183725Jy sigma=0.000795 ! Fit after self-cal, rms=0.189274Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=32.6 mas, bpa=-18.05 degrees ! Estimated noise=3697.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315256 Jy ! Component: 100 - total flux cleaned = -0.00722752 Jy ! Component: 150 - total flux cleaned = -0.00965199 Jy ! Component: 200 - total flux cleaned = -0.0100107 Jy ! Total flux subtracted in 200 components = -0.0100107 Jy ! Clean residual min=-0.027474 max=0.020306 Jy/beam ! Clean residual mean=0.000254 rms=0.007288 Jy/beam ! Combined flux in latest and established models = 1.23269 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 135 components and 1.23269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186065Jy sigma=0.000772 ! Fit after self-cal, rms=0.186106Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.15996e-06 Jy ! Component: 100 - total flux cleaned = -1.97802e-05 Jy ! Component: 150 - total flux cleaned = -2.16462e-05 Jy ! Component: 200 - total flux cleaned = -0.000403899 Jy ! Total flux subtracted in 200 components = -0.000403899 Jy ! Clean residual min=-0.026954 max=0.019806 Jy/beam ! Clean residual mean=0.000243 rms=0.007193 Jy/beam ! Combined flux in latest and established models = 1.23229 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 149 components and 1.23229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185356Jy sigma=0.000769 ! Fit after self-cal, rms=0.185378Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185378Jy sigma=0.000769 ! Fit after self-cal, rms=0.174039Jy sigma=0.000695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=33.32 mas, bpa=-18.22 degrees ! Estimated noise=3752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.004533 Jy ! Component: 100 - total flux cleaned = -0.00539778 Jy ! Component: 150 - total flux cleaned = -0.00501421 Jy ! Component: 200 - total flux cleaned = -0.00438345 Jy ! Total flux subtracted in 200 components = -0.00438345 Jy ! Clean residual min=-0.019180 max=0.015624 Jy/beam ! Clean residual mean=0.000136 rms=0.005587 Jy/beam ! Combined flux in latest and established models = 1.22791 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 171 components and 1.22791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171726Jy sigma=0.000686 ! Fit after self-cal, rms=0.171861Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.01899e-06 Jy ! Component: 100 - total flux cleaned = 0.000262897 Jy ! Component: 150 - total flux cleaned = 0.000483705 Jy ! Component: 200 - total flux cleaned = 0.000480949 Jy ! Total flux subtracted in 200 components = 0.000480949 Jy ! Clean residual min=-0.018641 max=0.015066 Jy/beam ! Clean residual mean=0.000133 rms=0.005412 Jy/beam ! Combined flux in latest and established models = 1.22839 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 186 components and 1.22839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171085Jy sigma=0.000683 ! Fit after self-cal, rms=0.171120Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171120Jy sigma=0.000683 ! Fit after self-cal, rms=0.170851Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.126 mas, bmaj=54.11 mas, bpa=-10.44 degrees ! Estimated noise=4358.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0058191 Jy ! Component: 100 - total flux cleaned = -0.00581904 Jy ! Component: 150 - total flux cleaned = -0.00581755 Jy ! Component: 200 - total flux cleaned = -0.00601519 Jy ! Total flux subtracted in 200 components = -0.00601519 Jy ! Clean residual min=-0.020143 max=0.017374 Jy/beam ! Clean residual mean=0.000065 rms=0.005943 Jy/beam ! Combined flux in latest and established models = 1.22237 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 202 components and 1.22237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170215Jy sigma=0.000668 ! Fit after self-cal, rms=0.170258Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.30154e-06 Jy ! Component: 100 - total flux cleaned = -0.000161159 Jy ! Component: 150 - total flux cleaned = -0.000155954 Jy ! Component: 200 - total flux cleaned = -0.000308371 Jy ! Total flux subtracted in 200 components = -0.000308371 Jy ! Clean residual min=-0.019464 max=0.017566 Jy/beam ! Clean residual mean=0.000052 rms=0.005819 Jy/beam ! Combined flux in latest and established models = 1.22206 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 208 components and 1.22206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169871Jy sigma=0.000667 ! Fit after self-cal, rms=0.169896Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=33.77 mas, bpa=-18.33 degrees ! Estimated noise=3782.41 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.522 x 33.77 at -18.33 degrees (North through East) ! Clean map min=-0.016982 max=0.88514 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169896Jy sigma=0.000667 ! Fit after self-cal, rms=0.154544Jy sigma=0.000560 ! Inverting map and beam ! Estimated beam: bmin=3.54 mas, bmaj=33.96 mas, bpa=-18.33 degrees ! Estimated noise=3790.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00510464 Jy ! Component: 100 - total flux cleaned = -0.00609538 Jy ! Component: 150 - total flux cleaned = -0.00593615 Jy ! Component: 200 - total flux cleaned = -0.00578933 Jy ! Total flux subtracted in 200 components = -0.00578933 Jy ! Clean residual min=-0.015912 max=0.012749 Jy/beam ! Clean residual mean=-0.000001 rms=0.004452 Jy/beam ! Combined flux in latest and established models = 1.21627 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 223 components and 1.21627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154109Jy sigma=0.000558 ! Fit after self-cal, rms=0.154124Jy sigma=0.000558 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136553 Jy ! Component: 100 - total flux cleaned = 0.000251909 Jy ! Component: 150 - total flux cleaned = 0.000250861 Jy ! Component: 200 - total flux cleaned = 0.000145977 Jy ! Total flux subtracted in 200 components = 0.000145977 Jy ! Clean residual min=-0.015657 max=0.013092 Jy/beam ! Clean residual mean=-0.000002 rms=0.004397 Jy/beam ! Combined flux in latest and established models = 1.21642 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 234 components and 1.21642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153940Jy sigma=0.000557 ! Fit after self-cal, rms=0.153965Jy sigma=0.000557 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153965Jy sigma=0.000557 ! Fit after self-cal, rms=0.155870Jy sigma=0.000555 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=31.45 mas, bpa=-18.62 degrees ! Estimated noise=5384.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.734578 Jy ! Component: 100 - total flux cleaned = 0.949317 Jy ! Component: 150 - total flux cleaned = 1.03579 Jy ! Component: 200 - total flux cleaned = 1.07982 Jy ! Total flux subtracted in 200 components = 1.07982 Jy ! Clean residual min=-0.026762 max=0.025888 Jy/beam ! Clean residual mean=-0.000515 rms=0.007693 Jy/beam ! Combined flux in latest and established models = 1.07982 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 1.07982 Jy ! Inverting map and beam ! Estimated beam: bmin=3.543 mas, bmaj=34.22 mas, bpa=-18.39 degrees ! Estimated noise=3802.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491407 Jy ! Component: 100 - total flux cleaned = 0.0795565 Jy ! Component: 150 - total flux cleaned = 0.0997695 Jy ! Component: 200 - total flux cleaned = 0.113394 Jy ! Total flux subtracted in 200 components = 0.113394 Jy ! Clean residual min=-0.016931 max=0.012627 Jy/beam ! Clean residual mean=-0.000193 rms=0.004828 Jy/beam ! Combined flux in latest and established models = 1.19322 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 115 components and 1.19322 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.211 mas, bmaj=54.36 mas, bpa=-10.54 degrees ! Estimated noise=4345.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132036 Jy ! Component: 100 - total flux cleaned = 0.0206184 Jy ! Component: 150 - total flux cleaned = 0.024476 Jy ! Component: 200 - total flux cleaned = 0.0252861 Jy ! Total flux subtracted in 200 components = 0.0252861 Jy ! Clean residual min=-0.017874 max=0.015238 Jy/beam ! Clean residual mean=0.000013 rms=0.005346 Jy/beam ! Combined flux in latest and established models = 1.2185 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571796 Jy ! Component: 100 - total flux cleaned = 0.00106231 Jy ! Component: 150 - total flux cleaned = 0.0013227 Jy ! Component: 200 - total flux cleaned = 0.00148218 Jy ! Total flux subtracted in 200 components = 0.00148218 Jy ! Clean residual min=-0.017748 max=0.015441 Jy/beam ! Clean residual mean=0.000031 rms=0.005274 Jy/beam ! Combined flux in latest and established models = 1.21999 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 165 components and 1.21999 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.543 mas, bmaj=34.22 mas, bpa=-18.39 degrees ! Estimated noise=3802.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000617905 Jy ! Component: 100 - total flux cleaned = 0.000381285 Jy ! Component: 150 - total flux cleaned = -1.43927e-05 Jy ! Component: 200 - total flux cleaned = -0.000353283 Jy ! Total flux subtracted in 200 components = -0.000353283 Jy ! Clean residual min=-0.014798 max=0.011735 Jy/beam ! Clean residual mean=0.000035 rms=0.004284 Jy/beam ! Combined flux in latest and established models = 1.21963 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 187 components and 1.21963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156709Jy sigma=0.000554 ! Fit after self-cal, rms=0.156682Jy sigma=0.000554 wmodel J0334-4008_S_2017_10_09_pus_map.mod ! Writing 187 model components to file: J0334-4008_S_2017_10_09_pus_map.mod wobs J0334-4008_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_10_09_pus_uvs.fits wwins J0334-4008_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0334-4008_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00640158 Jy ! Component: 100 - total flux cleaned = -0.0106756 Jy ! Component: 150 - total flux cleaned = -0.013547 Jy ! Component: 200 - total flux cleaned = -0.0166073 Jy ! Component: 250 - total flux cleaned = -0.019477 Jy ! Component: 300 - total flux cleaned = -0.0218528 Jy ! Component: 350 - total flux cleaned = -0.0237836 Jy ! Component: 400 - total flux cleaned = -0.0254783 Jy ! Component: 450 - total flux cleaned = -0.0269566 Jy ! Component: 500 - total flux cleaned = -0.0275257 Jy ! Component: 550 - total flux cleaned = -0.0279401 Jy ! Component: 600 - total flux cleaned = -0.0284666 Jy ! Component: 650 - total flux cleaned = -0.0290979 Jy ! Component: 700 - total flux cleaned = -0.0290963 Jy ! Component: 750 - total flux cleaned = -0.0293337 Jy ! Component: 800 - total flux cleaned = -0.0292192 Jy ! Component: 850 - total flux cleaned = -0.0292232 Jy ! Component: 900 - total flux cleaned = -0.0294415 Jy ! Component: 950 - total flux cleaned = -0.029547 Jy ! Component: 1000 - total flux cleaned = -0.0293402 Jy ! Component: 1050 - total flux cleaned = -0.0292414 Jy ! Component: 1100 - total flux cleaned = -0.0288507 Jy ! Component: 1150 - total flux cleaned = -0.0283725 Jy ! Component: 1200 - total flux cleaned = -0.0279992 Jy ! Component: 1250 - total flux cleaned = -0.0274511 Jy ! Component: 1300 - total flux cleaned = -0.0271806 Jy ! Component: 1350 - total flux cleaned = -0.026564 Jy ! Component: 1400 - total flux cleaned = -0.0259639 Jy ! Component: 1450 - total flux cleaned = -0.0253761 Jy ! Component: 1500 - total flux cleaned = -0.0246373 Jy ! Component: 1550 - total flux cleaned = -0.0243147 Jy ! Component: 1600 - total flux cleaned = -0.0238389 Jy ! Component: 1650 - total flux cleaned = -0.023374 Jy ! Component: 1700 - total flux cleaned = -0.0227656 Jy ! Component: 1750 - total flux cleaned = -0.0221707 Jy ! Component: 1800 - total flux cleaned = -0.0214424 Jy ! Component: 1850 - total flux cleaned = -0.0209427 Jy ! Component: 1900 - total flux cleaned = -0.0203102 Jy ! Component: 1950 - total flux cleaned = -0.019689 Jy ! Component: 2000 - total flux cleaned = -0.0190779 Jy ! Component: 2050 - total flux cleaned = -0.0184109 Jy ! Component: 2100 - total flux cleaned = -0.0176248 Jy ! Component: 2150 - total flux cleaned = -0.017109 Jy ! Component: 2200 - total flux cleaned = -0.0164757 Jy ! Component: 2250 - total flux cleaned = -0.0157897 Jy ! Component: 2300 - total flux cleaned = -0.015422 Jy ! Component: 2350 - total flux cleaned = -0.0149388 Jy ! Component: 2400 - total flux cleaned = -0.0144627 Jy ! Component: 2450 - total flux cleaned = -0.0139355 Jy ! Component: 2500 - total flux cleaned = -0.0135308 Jy ! Component: 2550 - total flux cleaned = -0.013075 Jy ! Component: 2600 - total flux cleaned = -0.0126813 Jy ! Component: 2650 - total flux cleaned = -0.0122366 Jy ! Component: 2700 - total flux cleaned = -0.0117419 Jy ! Component: 2750 - total flux cleaned = -0.0113073 Jy ! Component: 2800 - total flux cleaned = -0.010771 Jy ! Component: 2850 - total flux cleaned = -0.0105058 Jy ! Component: 2900 - total flux cleaned = -0.0101374 Jy ! Component: 2950 - total flux cleaned = -0.00966808 Jy ! Component: 3000 - total flux cleaned = -0.00925507 Jy ! Component: 3050 - total flux cleaned = -0.00879433 Jy ! Component: 3100 - total flux cleaned = -0.00833769 Jy ! Component: 3150 - total flux cleaned = -0.00798532 Jy ! Component: 3200 - total flux cleaned = -0.00748559 Jy ! Component: 3250 - total flux cleaned = -0.00703942 Jy ! Component: 3300 - total flux cleaned = -0.00659718 Jy ! Component: 3350 - total flux cleaned = -0.00620671 Jy ! Component: 3400 - total flux cleaned = -0.00572212 Jy ! Component: 3450 - total flux cleaned = -0.00528891 Jy ! Component: 3500 - total flux cleaned = -0.00481046 Jy ! Component: 3550 - total flux cleaned = -0.00428699 Jy ! Component: 3600 - total flux cleaned = -0.00376542 Jy ! Component: 3650 - total flux cleaned = -0.00319855 Jy ! Component: 3700 - total flux cleaned = -0.0026806 Jy ! Component: 3750 - total flux cleaned = -0.00211735 Jy ! Component: 3800 - total flux cleaned = -0.00160166 Jy ! Component: 3850 - total flux cleaned = -0.00113394 Jy ! Component: 3900 - total flux cleaned = -0.000806633 Jy ! Component: 3950 - total flux cleaned = -0.000339274 Jy ! Component: 4000 - total flux cleaned = 3.4059e-05 Jy ! Component: 4050 - total flux cleaned = 0.000453658 Jy ! Total flux subtracted in 4096 components = 0.000826632 Jy ! Clean residual min=-0.002432 max=0.002555 Jy/beam ! Clean residual mean=0.000068 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 1.22046 Jy keep ! Adding 415 model components to the UV plane model. ! The established model now contains 602 components and 1.22046 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.543 x 34.22 at -18.39 degrees (North through East) ! Clean map min=-0.011893 max=0.90124 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.901241 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00103466 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.344411 0.344411 0.688823 1.37765 2.75529 5.51058 11.0212 22.0423 44.0846 88.1693 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.901 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.543 x 34.22 at -18.39 degrees (North through East) ! Clean map min=-0.011893 max=0.90124 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:57 2019