! Started logfile: J0334-4008_S_2017_08_12_pus_uvs.log on Fri May 10 14:51:43 2019 obs J0334-4008_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.317949 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.299891Jy sigma=0.001830 ! Fit after self-cal, rms=0.209786Jy sigma=0.001295 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=6.581 mas, bpa=-8.297 degrees ! Estimated noise=5608.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.853533 Jy ! Component: 100 - total flux cleaned = 1.05079 Jy ! Total flux subtracted in 100 components = 1.05079 Jy ! Clean residual min=-0.053068 max=0.078717 Jy/beam ! Clean residual mean=-0.000121 rms=0.019980 Jy/beam ! Combined flux in latest and established models = 1.05079 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.05079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179942Jy sigma=0.001109 ! Fit after self-cal, rms=0.179938Jy sigma=0.001109 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.564 mas, bmaj=7.158 mas, bpa=-8.703 degrees ! Estimated noise=4837.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102026 Jy ! Component: 100 - total flux cleaned = 0.150524 Jy ! Component: 150 - total flux cleaned = 0.175333 Jy ! Component: 200 - total flux cleaned = 0.189017 Jy ! Total flux subtracted in 200 components = 0.189017 Jy ! Clean residual min=-0.019158 max=0.018493 Jy/beam ! Clean residual mean=-0.000291 rms=0.006325 Jy/beam ! Combined flux in latest and established models = 1.23981 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 1.23981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116504Jy sigma=0.000713 ! Fit after self-cal, rms=0.116419Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.07 ! LA 1.03 MK 1.00 NL 1.00* OV 0.99 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.03 ! LA 0.96 MK 1.00 NL 1.00* OV 1.03 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.94 MK 1.02 NL 1.00* OV 0.95 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.116419Jy sigma=0.000712 ! Fit after self-cal, rms=0.101032Jy sigma=0.000616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=7.169 mas, bpa=-8.717 degrees ! Estimated noise=4820.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000513553 Jy ! Component: 100 - total flux cleaned = -0.000400516 Jy ! Component: 150 - total flux cleaned = -0.000344875 Jy ! Component: 200 - total flux cleaned = -0.000241784 Jy ! Total flux subtracted in 200 components = -0.000241784 Jy ! Clean residual min=-0.008491 max=0.009294 Jy/beam ! Clean residual mean=-0.000058 rms=0.002402 Jy/beam ! Combined flux in latest and established models = 1.23957 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 37 components and 1.23957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100976Jy sigma=0.000616 ! Fit after self-cal, rms=0.101004Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101004Jy sigma=0.000616 ! Fit after self-cal, rms=0.101026Jy sigma=0.000616 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=7.169 mas, bpa=-8.71 degrees ! Estimated noise=4820.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325328 Jy ! Component: 100 - total flux cleaned = -0.000223064 Jy ! Component: 150 - total flux cleaned = -0.000173642 Jy ! Component: 200 - total flux cleaned = -0.000128218 Jy ! Total flux subtracted in 200 components = -0.000128218 Jy ! Clean residual min=-0.008369 max=0.009054 Jy/beam ! Clean residual mean=-0.000057 rms=0.002363 Jy/beam ! Combined flux in latest and established models = 1.23944 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 1.23944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100984Jy sigma=0.000616 ! Fit after self-cal, rms=0.100977Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168034 Jy ! Component: 100 - total flux cleaned = -0.000124638 Jy ! Component: 150 - total flux cleaned = -0.000124621 Jy ! Component: 200 - total flux cleaned = -8.12807e-05 Jy ! Total flux subtracted in 200 components = -8.12807e-05 Jy ! Clean residual min=-0.008253 max=0.008809 Jy/beam ! Clean residual mean=-0.000057 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 1.23936 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 1.23936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100945Jy sigma=0.000615 ! Fit after self-cal, rms=0.100940Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100940Jy sigma=0.000615 ! Fit after self-cal, rms=0.100952Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=7.17 mas, bpa=-8.699 degrees ! Estimated noise=4820.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255397 Jy ! Component: 100 - total flux cleaned = -0.000256972 Jy ! Component: 150 - total flux cleaned = -0.000256057 Jy ! Component: 200 - total flux cleaned = -0.000256105 Jy ! Total flux subtracted in 200 components = -0.000256105 Jy ! Clean residual min=-0.008149 max=0.008659 Jy/beam ! Clean residual mean=-0.000056 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 1.2391 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 1.2391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100924Jy sigma=0.000615 ! Fit after self-cal, rms=0.100919Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134539 Jy ! Component: 100 - total flux cleaned = -0.000133779 Jy ! Component: 150 - total flux cleaned = -0.000134169 Jy ! Component: 200 - total flux cleaned = -9.80314e-05 Jy ! Total flux subtracted in 200 components = -9.80314e-05 Jy ! Clean residual min=-0.008057 max=0.008615 Jy/beam ! Clean residual mean=-0.000056 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 1.239 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 1.239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100897Jy sigma=0.000615 ! Fit after self-cal, rms=0.100894Jy sigma=0.000615 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100894Jy sigma=0.000615 ! Fit after self-cal, rms=0.100897Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.509 mas, bmaj=25.25 mas, bpa=-10.83 degrees ! Estimated noise=7146.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501143 Jy ! Component: 100 - total flux cleaned = 0.000500108 Jy ! Component: 150 - total flux cleaned = 0.000501611 Jy ! Component: 200 - total flux cleaned = 0.000503404 Jy ! Total flux subtracted in 200 components = 0.000503404 Jy ! Clean residual min=-0.009454 max=0.009568 Jy/beam ! Clean residual mean=-0.000135 rms=0.003764 Jy/beam ! Combined flux in latest and established models = 1.23951 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 48 components and 1.23951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100945Jy sigma=0.000615 ! Fit after self-cal, rms=0.100911Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154211 Jy ! Component: 100 - total flux cleaned = 0.000149365 Jy ! Component: 150 - total flux cleaned = 0.000146604 Jy ! Component: 200 - total flux cleaned = 0.000144628 Jy ! Total flux subtracted in 200 components = 0.000144628 Jy ! Clean residual min=-0.009390 max=0.009480 Jy/beam ! Clean residual mean=-0.000135 rms=0.003741 Jy/beam ! Combined flux in latest and established models = 1.23965 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 1.23965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101010Jy sigma=0.000616 ! Fit after self-cal, rms=0.100986Jy sigma=0.000616 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=7.17 mas, bpa=-8.689 degrees ! Estimated noise=4820.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.576 x 7.17 at -8.689 degrees (North through East) ! Clean map min=-0.0071583 max=1.0975 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100986Jy sigma=0.000616 ! Fit after self-cal, rms=0.089884Jy sigma=0.000541 ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=7.176 mas, bpa=-8.719 degrees ! Estimated noise=4835.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112441 Jy ! Component: 100 - total flux cleaned = -0.000307726 Jy ! Component: 150 - total flux cleaned = -0.000349169 Jy ! Component: 200 - total flux cleaned = -0.000311173 Jy ! Total flux subtracted in 200 components = -0.000311173 Jy ! Clean residual min=-0.007752 max=0.008921 Jy/beam ! Clean residual mean=-0.000059 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 1.23934 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 1.23934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089819Jy sigma=0.000541 ! Fit after self-cal, rms=0.089817Jy sigma=0.000541 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.14956e-05 Jy ! Component: 100 - total flux cleaned = -1.74692e-05 Jy ! Component: 150 - total flux cleaned = 1.31763e-05 Jy ! Component: 200 - total flux cleaned = 6.64157e-05 Jy ! Total flux subtracted in 200 components = 6.64157e-05 Jy ! Clean residual min=-0.007698 max=0.008802 Jy/beam ! Clean residual mean=-0.000059 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 1.23941 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 1.23941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089793Jy sigma=0.000541 ! Fit after self-cal, rms=0.089792Jy sigma=0.000541 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089792Jy sigma=0.000541 ! Fit after self-cal, rms=0.089804Jy sigma=0.000541 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.222 mas, bmaj=6.593 mas, bpa=-8.196 degrees ! Estimated noise=5608.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.853593 Jy ! Component: 100 - total flux cleaned = 1.04846 Jy ! Component: 150 - total flux cleaned = 1.12959 Jy ! Component: 200 - total flux cleaned = 1.17346 Jy ! Total flux subtracted in 200 components = 1.17346 Jy ! Clean residual min=-0.018296 max=0.021919 Jy/beam ! Clean residual mean=-0.000029 rms=0.006280 Jy/beam ! Combined flux in latest and established models = 1.17346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.17346 Jy ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=7.176 mas, bpa=-8.713 degrees ! Estimated noise=4835.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319135 Jy ! Component: 100 - total flux cleaned = 0.0478821 Jy ! Component: 150 - total flux cleaned = 0.0562797 Jy ! Component: 200 - total flux cleaned = 0.0608324 Jy ! Total flux subtracted in 200 components = 0.0608324 Jy ! Clean residual min=-0.008965 max=0.008707 Jy/beam ! Clean residual mean=-0.000062 rms=0.002469 Jy/beam ! Combined flux in latest and established models = 1.23429 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 43 components and 1.23429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.523 mas, bmaj=25.3 mas, bpa=-10.86 degrees ! Estimated noise=7149.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460089 Jy ! Component: 100 - total flux cleaned = 0.00515242 Jy ! Component: 150 - total flux cleaned = 0.00515528 Jy ! Component: 200 - total flux cleaned = 0.00516061 Jy ! Total flux subtracted in 200 components = 0.00516061 Jy ! Clean residual min=-0.009784 max=0.009866 Jy/beam ! Clean residual mean=-0.000146 rms=0.003976 Jy/beam ! Combined flux in latest and established models = 1.23945 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69946e-06 Jy ! Component: 100 - total flux cleaned = 6.37886e-06 Jy ! Component: 150 - total flux cleaned = 7.06124e-06 Jy ! Component: 200 - total flux cleaned = 3.06972e-05 Jy ! Total flux subtracted in 200 components = 3.06972e-05 Jy ! Clean residual min=-0.009739 max=0.009793 Jy/beam ! Clean residual mean=-0.000146 rms=0.003953 Jy/beam ! Combined flux in latest and established models = 1.23949 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 1.23949 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=7.176 mas, bpa=-8.713 degrees ! Estimated noise=4835.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00091816 Jy ! Component: 100 - total flux cleaned = -0.000590326 Jy ! Component: 150 - total flux cleaned = -0.000282722 Jy ! Component: 200 - total flux cleaned = -0.000144688 Jy ! Total flux subtracted in 200 components = -0.000144688 Jy ! Clean residual min=-0.008172 max=0.008463 Jy/beam ! Clean residual mean=-0.000059 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 1.23934 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 1.23934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089926Jy sigma=0.000542 ! Fit after self-cal, rms=0.089899Jy sigma=0.000542 wmodel J0334-4008_S_2017_08_12_pus_map.mod ! Writing 57 model components to file: J0334-4008_S_2017_08_12_pus_map.mod wobs J0334-4008_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_08_12_pus_uvs.fits wwins J0334-4008_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0334-4008_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121033 Jy ! Component: 100 - total flux cleaned = 0.00147084 Jy ! Component: 150 - total flux cleaned = 0.00146529 Jy ! Component: 200 - total flux cleaned = 0.0016512 Jy ! Component: 250 - total flux cleaned = 0.00191283 Jy ! Component: 300 - total flux cleaned = 0.00247399 Jy ! Component: 350 - total flux cleaned = 0.00285115 Jy ! Component: 400 - total flux cleaned = 0.00320652 Jy ! Component: 450 - total flux cleaned = 0.00347541 Jy ! Component: 500 - total flux cleaned = 0.00353922 Jy ! Component: 550 - total flux cleaned = 0.00335362 Jy ! Component: 600 - total flux cleaned = 0.00317491 Jy ! Component: 650 - total flux cleaned = 0.00311677 Jy ! Component: 700 - total flux cleaned = 0.00300391 Jy ! Component: 750 - total flux cleaned = 0.00283841 Jy ! Component: 800 - total flux cleaned = 0.00273122 Jy ! Component: 850 - total flux cleaned = 0.00283623 Jy ! Component: 900 - total flux cleaned = 0.00293937 Jy ! Component: 950 - total flux cleaned = 0.0030412 Jy ! Component: 1000 - total flux cleaned = 0.00314182 Jy ! Component: 1050 - total flux cleaned = 0.00328945 Jy ! Component: 1100 - total flux cleaned = 0.00328906 Jy ! Component: 1150 - total flux cleaned = 0.00333705 Jy ! Component: 1200 - total flux cleaned = 0.00338446 Jy ! Component: 1250 - total flux cleaned = 0.00352674 Jy ! Component: 1300 - total flux cleaned = 0.00371598 Jy ! Component: 1350 - total flux cleaned = 0.00390473 Jy ! Component: 1400 - total flux cleaned = 0.0041869 Jy ! Component: 1450 - total flux cleaned = 0.00437509 Jy ! Component: 1500 - total flux cleaned = 0.00465724 Jy ! Component: 1550 - total flux cleaned = 0.00494011 Jy ! Component: 1600 - total flux cleaned = 0.00508236 Jy ! Component: 1650 - total flux cleaned = 0.00532052 Jy ! Component: 1700 - total flux cleaned = 0.00560805 Jy ! Component: 1750 - total flux cleaned = 0.00585026 Jy ! Component: 1800 - total flux cleaned = 0.00599586 Jy ! Component: 1850 - total flux cleaned = 0.00614314 Jy ! Component: 1900 - total flux cleaned = 0.00629237 Jy ! Component: 1950 - total flux cleaned = 0.00644321 Jy ! Component: 2000 - total flux cleaned = 0.00664747 Jy ! Component: 2050 - total flux cleaned = 0.00680356 Jy ! Component: 2100 - total flux cleaned = 0.00696058 Jy ! Component: 2150 - total flux cleaned = 0.00711972 Jy ! Component: 2200 - total flux cleaned = 0.00738911 Jy ! Component: 2250 - total flux cleaned = 0.00749924 Jy ! Component: 2300 - total flux cleaned = 0.00772134 Jy ! Component: 2350 - total flux cleaned = 0.00794665 Jy ! Component: 2400 - total flux cleaned = 0.0081755 Jy ! Component: 2450 - total flux cleaned = 0.00840726 Jy ! Component: 2500 - total flux cleaned = 0.00870134 Jy ! Component: 2550 - total flux cleaned = 0.00900047 Jy ! Component: 2600 - total flux cleaned = 0.00924353 Jy ! Component: 2650 - total flux cleaned = 0.00955347 Jy ! Component: 2700 - total flux cleaned = 0.00974257 Jy ! Component: 2750 - total flux cleaned = 0.00999852 Jy ! Component: 2800 - total flux cleaned = 0.0101942 Jy ! Component: 2850 - total flux cleaned = 0.0103932 Jy ! Component: 2900 - total flux cleaned = 0.0105968 Jy ! Component: 2950 - total flux cleaned = 0.0108041 Jy ! Component: 3000 - total flux cleaned = 0.0110156 Jy ! Component: 3050 - total flux cleaned = 0.0112305 Jy ! Component: 3100 - total flux cleaned = 0.0114488 Jy ! Component: 3150 - total flux cleaned = 0.0117467 Jy ! Component: 3200 - total flux cleaned = 0.0119738 Jy ! Component: 3250 - total flux cleaned = 0.0123606 Jy ! Component: 3300 - total flux cleaned = 0.012519 Jy ! Component: 3350 - total flux cleaned = 0.0128401 Jy ! Component: 3400 - total flux cleaned = 0.0130859 Jy ! Component: 3450 - total flux cleaned = 0.0134202 Jy ! Component: 3500 - total flux cleaned = 0.0137619 Jy ! Component: 3550 - total flux cleaned = 0.0140227 Jy ! Component: 3600 - total flux cleaned = 0.0142894 Jy ! Component: 3650 - total flux cleaned = 0.0146532 Jy ! Component: 3700 - total flux cleaned = 0.0149325 Jy ! Component: 3750 - total flux cleaned = 0.0153121 Jy ! Component: 3800 - total flux cleaned = 0.0156037 Jy ! Component: 3850 - total flux cleaned = 0.0159996 Jy ! Component: 3900 - total flux cleaned = 0.0164074 Jy ! Component: 3950 - total flux cleaned = 0.0167171 Jy ! Component: 4000 - total flux cleaned = 0.0171424 Jy ! Component: 4050 - total flux cleaned = 0.0174706 Jy ! Total flux subtracted in 4096 components = 0.0178039 Jy ! Clean residual min=-0.007022 max=0.006261 Jy/beam ! Clean residual mean=0.000077 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 1.25714 Jy keep ! Adding 176 model components to the UV plane model. ! The established model now contains 233 components and 1.25714 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.579 x 7.176 at -8.713 degrees (North through East) ! Clean map min=-0.0091049 max=1.1069 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.10694 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00206292 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.559084 0.559084 1.11817 2.23634 4.47267 8.94535 17.8907 35.7814 71.5628 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0061 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.579 x 7.176 at -8.713 degrees (North through East) ! Clean map min=-0.0091049 max=1.1069 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:51:47 2019