! Started logfile: J0334-4008_S_2017_08_05_pus_uvs.log on Thu May 9 19:19:29 2019 obs J0334-4008_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_08_05_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.304274 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.394334Jy sigma=0.002579 ! Fit after self-cal, rms=0.348560Jy sigma=0.002278 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=34.67 mas, bpa=-28.14 degrees ! Estimated noise=5335.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.98596 Jy ! Component: 100 - total flux cleaned = 1.20794 Jy ! Total flux subtracted in 100 components = 1.20794 Jy ! Clean residual min=-0.044697 max=0.094348 Jy/beam ! Clean residual mean=-0.000148 rms=0.020388 Jy/beam ! Combined flux in latest and established models = 1.20794 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.20794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193677Jy sigma=0.001248 ! Fit after self-cal, rms=0.193670Jy sigma=0.001248 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=34.33 mas, bpa=-27.93 degrees ! Estimated noise=4690.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106227 Jy ! Component: 100 - total flux cleaned = 0.148338 Jy ! Component: 150 - total flux cleaned = 0.169031 Jy ! Component: 200 - total flux cleaned = 0.175597 Jy ! Total flux subtracted in 200 components = 0.175597 Jy ! Clean residual min=-0.020274 max=0.021022 Jy/beam ! Clean residual mean=0.000304 rms=0.006323 Jy/beam ! Combined flux in latest and established models = 1.38354 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 47 components and 1.38354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130708Jy sigma=0.000854 ! Fit after self-cal, rms=0.130688Jy sigma=0.000854 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.05 ! LA 1.01 MK 0.99 NL 1.00* OV 1.02 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.01 ! LA 0.95 MK 0.98 NL 1.00* OV 1.05 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.88 ! LA 1.00* MK 1.02 NL 1.00* OV 0.96 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.130688Jy sigma=0.000854 ! Fit after self-cal, rms=0.097362Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=33.51 mas, bpa=-28.07 degrees ! Estimated noise=4880.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315204 Jy ! Component: 100 - total flux cleaned = -0.0043555 Jy ! Component: 150 - total flux cleaned = -0.004581 Jy ! Component: 200 - total flux cleaned = -0.00464968 Jy ! Total flux subtracted in 200 components = -0.00464968 Jy ! Clean residual min=-0.006284 max=0.007114 Jy/beam ! Clean residual mean=0.000128 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 1.37889 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 67 components and 1.37889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097173Jy sigma=0.000649 ! Fit after self-cal, rms=0.097148Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097148Jy sigma=0.000649 ! Fit after self-cal, rms=0.097149Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=33.5 mas, bpa=-28.07 degrees ! Estimated noise=4879.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000488759 Jy ! Component: 100 - total flux cleaned = -0.000430428 Jy ! Component: 150 - total flux cleaned = -0.00037492 Jy ! Component: 200 - total flux cleaned = -0.000426396 Jy ! Total flux subtracted in 200 components = -0.000426396 Jy ! Clean residual min=-0.006173 max=0.006988 Jy/beam ! Clean residual mean=0.000121 rms=0.002044 Jy/beam ! Combined flux in latest and established models = 1.37846 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 1.37846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097082Jy sigma=0.000648 ! Fit after self-cal, rms=0.097082Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151038 Jy ! Component: 100 - total flux cleaned = -0.000244954 Jy ! Component: 150 - total flux cleaned = -0.000425115 Jy ! Component: 200 - total flux cleaned = -0.000554541 Jy ! Total flux subtracted in 200 components = -0.000554541 Jy ! Clean residual min=-0.006161 max=0.006972 Jy/beam ! Clean residual mean=0.000118 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 1.37791 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 94 components and 1.37791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097043Jy sigma=0.000648 ! Fit after self-cal, rms=0.097044Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097044Jy sigma=0.000648 ! Fit after self-cal, rms=0.097021Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=33.49 mas, bpa=-28.06 degrees ! Estimated noise=4878.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508491 Jy ! Component: 100 - total flux cleaned = -0.000459919 Jy ! Component: 150 - total flux cleaned = -0.000414062 Jy ! Component: 200 - total flux cleaned = -0.000372811 Jy ! Total flux subtracted in 200 components = -0.000372811 Jy ! Clean residual min=-0.006060 max=0.006829 Jy/beam ! Clean residual mean=0.000104 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 1.37753 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 1.37753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096979Jy sigma=0.000648 ! Fit after self-cal, rms=0.096979Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.64765e-05 Jy ! Component: 100 - total flux cleaned = -0.000267604 Jy ! Component: 150 - total flux cleaned = -0.000414655 Jy ! Component: 200 - total flux cleaned = -0.000521577 Jy ! Total flux subtracted in 200 components = -0.000521577 Jy ! Clean residual min=-0.006007 max=0.006835 Jy/beam ! Clean residual mean=0.000101 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 1.37701 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 103 components and 1.37701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096954Jy sigma=0.000648 ! Fit after self-cal, rms=0.096954Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096954Jy sigma=0.000648 ! Fit after self-cal, rms=0.096934Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.29 mas, bmaj=41.09 mas, bpa=-14.23 degrees ! Estimated noise=5929.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000321994 Jy ! Component: 100 - total flux cleaned = -0.000471756 Jy ! Component: 150 - total flux cleaned = -0.00064456 Jy ! Component: 200 - total flux cleaned = -0.000810954 Jy ! Total flux subtracted in 200 components = -0.000810954 Jy ! Clean residual min=-0.005710 max=0.007010 Jy/beam ! Clean residual mean=0.000141 rms=0.002486 Jy/beam ! Combined flux in latest and established models = 1.3762 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 1.3762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096920Jy sigma=0.000648 ! Fit after self-cal, rms=0.096920Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137235 Jy ! Component: 100 - total flux cleaned = -0.000242566 Jy ! Component: 150 - total flux cleaned = -0.000370302 Jy ! Component: 200 - total flux cleaned = -0.000496113 Jy ! Total flux subtracted in 200 components = -0.000496113 Jy ! Clean residual min=-0.005694 max=0.006891 Jy/beam ! Clean residual mean=0.000136 rms=0.002465 Jy/beam ! Combined flux in latest and established models = 1.3757 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 128 components and 1.3757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096909Jy sigma=0.000647 ! Fit after self-cal, rms=0.096909Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=33.49 mas, bpa=-28.06 degrees ! Estimated noise=4877.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.441 x 33.49 at -28.06 degrees (North through East) ! Clean map min=-0.0056929 max=1.2298 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096909Jy sigma=0.000647 ! Fit after self-cal, rms=0.084348Jy sigma=0.000563 ! Inverting map and beam ! Estimated beam: bmin=3.442 mas, bmaj=33.48 mas, bpa=-28.06 degrees ! Estimated noise=4877.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656606 Jy ! Component: 100 - total flux cleaned = -0.000696378 Jy ! Component: 150 - total flux cleaned = -0.000802695 Jy ! Component: 200 - total flux cleaned = -0.000869675 Jy ! Total flux subtracted in 200 components = -0.000869675 Jy ! Clean residual min=-0.005858 max=0.006413 Jy/beam ! Clean residual mean=0.000081 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 1.37483 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 1.37483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084317Jy sigma=0.000563 ! Fit after self-cal, rms=0.084317Jy sigma=0.000563 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.88117e-05 Jy ! Component: 100 - total flux cleaned = -0.000162789 Jy ! Component: 150 - total flux cleaned = -0.000224912 Jy ! Component: 200 - total flux cleaned = -0.000285894 Jy ! Total flux subtracted in 200 components = -0.000285894 Jy ! Clean residual min=-0.005809 max=0.006391 Jy/beam ! Clean residual mean=0.000080 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 1.37455 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 142 components and 1.37455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084298Jy sigma=0.000562 ! Fit after self-cal, rms=0.084298Jy sigma=0.000562 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084298Jy sigma=0.000562 ! Fit after self-cal, rms=0.084289Jy sigma=0.000562 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=33.42 mas, bpa=-28.35 degrees ! Estimated noise=5504.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.99635 Jy ! Component: 100 - total flux cleaned = 1.21616 Jy ! Component: 150 - total flux cleaned = 1.2936 Jy ! Component: 200 - total flux cleaned = 1.32952 Jy ! Total flux subtracted in 200 components = 1.32952 Jy ! Clean residual min=-0.011967 max=0.016496 Jy/beam ! Clean residual mean=0.000011 rms=0.004142 Jy/beam ! Combined flux in latest and established models = 1.32951 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.32951 Jy ! Inverting map and beam ! Estimated beam: bmin=3.442 mas, bmaj=33.48 mas, bpa=-28.06 degrees ! Estimated noise=4876.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210658 Jy ! Component: 100 - total flux cleaned = 0.0308496 Jy ! Component: 150 - total flux cleaned = 0.0369056 Jy ! Component: 200 - total flux cleaned = 0.0410394 Jy ! Total flux subtracted in 200 components = 0.0410394 Jy ! Clean residual min=-0.006896 max=0.006670 Jy/beam ! Clean residual mean=0.000091 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 1.37055 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 57 components and 1.37055 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.29 mas, bmaj=41.1 mas, bpa=-14.21 degrees ! Estimated noise=5926.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352135 Jy ! Component: 100 - total flux cleaned = 0.00428976 Jy ! Component: 150 - total flux cleaned = 0.00460643 Jy ! Component: 200 - total flux cleaned = 0.0048056 Jy ! Total flux subtracted in 200 components = 0.0048056 Jy ! Clean residual min=-0.005566 max=0.006557 Jy/beam ! Clean residual mean=0.000144 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 1.37536 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.70933e-05 Jy ! Component: 100 - total flux cleaned = -2.26822e-05 Jy ! Component: 150 - total flux cleaned = -0.000155547 Jy ! Component: 200 - total flux cleaned = -0.000282912 Jy ! Total flux subtracted in 200 components = -0.000282912 Jy ! Clean residual min=-0.005680 max=0.006440 Jy/beam ! Clean residual mean=0.000136 rms=0.002446 Jy/beam ! Combined flux in latest and established models = 1.37508 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 122 components and 1.37508 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.442 mas, bmaj=33.48 mas, bpa=-28.06 degrees ! Estimated noise=4876.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000545447 Jy ! Component: 100 - total flux cleaned = -0.000717981 Jy ! Component: 150 - total flux cleaned = -0.000870308 Jy ! Component: 200 - total flux cleaned = -0.00100975 Jy ! Total flux subtracted in 200 components = -0.00100975 Jy ! Clean residual min=-0.006373 max=0.006142 Jy/beam ! Clean residual mean=0.000080 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 1.37407 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 144 components and 1.37407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084339Jy sigma=0.000563 ! Fit after self-cal, rms=0.084329Jy sigma=0.000563 wmodel J0334-4008_S_2017_08_05_pus_map.mod ! Writing 144 model components to file: J0334-4008_S_2017_08_05_pus_map.mod wobs J0334-4008_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_08_05_pus_uvs.fits wwins J0334-4008_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J0334-4008_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546343 Jy ! Component: 100 - total flux cleaned = 0.000649531 Jy ! Component: 150 - total flux cleaned = 0.000735675 Jy ! Component: 200 - total flux cleaned = 0.000732861 Jy ! Component: 250 - total flux cleaned = 0.00073104 Jy ! Component: 300 - total flux cleaned = 0.000848777 Jy ! Component: 350 - total flux cleaned = 0.000847818 Jy ! Component: 400 - total flux cleaned = 0.000905895 Jy ! Component: 450 - total flux cleaned = 0.000905015 Jy ! Component: 500 - total flux cleaned = 0.000905206 Jy ! Component: 550 - total flux cleaned = 0.00102522 Jy ! Component: 600 - total flux cleaned = 0.00102405 Jy ! Component: 650 - total flux cleaned = 0.000898708 Jy ! Component: 700 - total flux cleaned = 0.000703989 Jy ! Component: 750 - total flux cleaned = 0.000566664 Jy ! Component: 800 - total flux cleaned = 0.000423514 Jy ! Component: 850 - total flux cleaned = 0.000353903 Jy ! Component: 900 - total flux cleaned = 0.000354785 Jy ! Component: 950 - total flux cleaned = 0.000438168 Jy ! Component: 1000 - total flux cleaned = 0.000525079 Jy ! Component: 1050 - total flux cleaned = 0.000621583 Jy ! Component: 1100 - total flux cleaned = 0.000725062 Jy ! Component: 1150 - total flux cleaned = 0.00083403 Jy ! Component: 1200 - total flux cleaned = 0.00095417 Jy ! Component: 1250 - total flux cleaned = 0.00108124 Jy ! Component: 1300 - total flux cleaned = 0.00121769 Jy ! Component: 1350 - total flux cleaned = 0.00121833 Jy ! Component: 1400 - total flux cleaned = 0.00136686 Jy ! Component: 1450 - total flux cleaned = 0.00152423 Jy ! Component: 1500 - total flux cleaned = 0.00168929 Jy ! Component: 1550 - total flux cleaned = 0.00186859 Jy ! Component: 1600 - total flux cleaned = 0.00186452 Jy ! Component: 1650 - total flux cleaned = 0.00185393 Jy ! Component: 1700 - total flux cleaned = 0.00207141 Jy ! Component: 1750 - total flux cleaned = 0.00207465 Jy ! Component: 1800 - total flux cleaned = 0.0020725 Jy ! Component: 1850 - total flux cleaned = 0.00233815 Jy ! Component: 1900 - total flux cleaned = 0.00234193 Jy ! Component: 1950 - total flux cleaned = 0.00264512 Jy ! Component: 2000 - total flux cleaned = 0.00264522 Jy ! Component: 2050 - total flux cleaned = 0.00263706 Jy ! Component: 2100 - total flux cleaned = 0.00301168 Jy ! Component: 2150 - total flux cleaned = 0.00301276 Jy ! Component: 2200 - total flux cleaned = 0.00301554 Jy ! Component: 2250 - total flux cleaned = 0.00301411 Jy ! Component: 2300 - total flux cleaned = 0.00300063 Jy ! Component: 2350 - total flux cleaned = 0.00299297 Jy ! Component: 2400 - total flux cleaned = 0.00351937 Jy ! Component: 2450 - total flux cleaned = 0.0035355 Jy ! Component: 2500 - total flux cleaned = 0.00355955 Jy ! Component: 2550 - total flux cleaned = 0.00355286 Jy ! Component: 2600 - total flux cleaned = 0.00354687 Jy ! Component: 2650 - total flux cleaned = 0.00427669 Jy ! Component: 2700 - total flux cleaned = 0.00428914 Jy ! Component: 2750 - total flux cleaned = 0.0043031 Jy ! Component: 2800 - total flux cleaned = 0.00427277 Jy ! Component: 2850 - total flux cleaned = 0.00426507 Jy ! Component: 2900 - total flux cleaned = 0.00526861 Jy ! Component: 2950 - total flux cleaned = 0.0052878 Jy ! Component: 3000 - total flux cleaned = 0.00531556 Jy ! Component: 3050 - total flux cleaned = 0.00531284 Jy ! Component: 3100 - total flux cleaned = 0.0052854 Jy ! Component: 3150 - total flux cleaned = 0.00670967 Jy ! Component: 3200 - total flux cleaned = 0.00674431 Jy ! Component: 3250 - total flux cleaned = 0.00676134 Jy ! Component: 3300 - total flux cleaned = 0.00674923 Jy ! Component: 3350 - total flux cleaned = 0.00672423 Jy ! Component: 3400 - total flux cleaned = 0.00671475 Jy ! Component: 3450 - total flux cleaned = 0.00664237 Jy ! Component: 3500 - total flux cleaned = 0.00879206 Jy ! Component: 3550 - total flux cleaned = 0.00883866 Jy ! Component: 3600 - total flux cleaned = 0.00884677 Jy ! Component: 3650 - total flux cleaned = 0.00877622 Jy ! Component: 3700 - total flux cleaned = 0.00871766 Jy ! Component: 3750 - total flux cleaned = 0.011691 Jy ! Component: 3800 - total flux cleaned = 0.0117335 Jy ! Component: 3850 - total flux cleaned = 0.0118053 Jy ! Component: 3900 - total flux cleaned = 0.0118919 Jy ! Component: 3950 - total flux cleaned = 0.0118431 Jy ! Component: 4000 - total flux cleaned = 0.0118484 Jy ! Component: 4050 - total flux cleaned = 0.0117844 Jy ! Total flux subtracted in 4096 components = 0.0165747 Jy ! Clean residual min=-0.276388 max=0.262127 Jy/beam ! Clean residual mean=-0.000503 rms=0.059347 Jy/beam ! Combined flux in latest and established models = 1.39064 Jy keep ! Adding 61 model components to the UV plane model. ! The established model now contains 205 components and 1.39064 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.442 x 33.48 at -28.06 degrees (North through East) ! Clean map min=-0.3968 max=1.2228 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.22276 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0683203 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -16.7622 16.7622 33.5243 67.0487 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.2049 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.222 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.442 x 33.48 at -28.06 degrees (North through East) ! Clean map min=-0.3968 max=1.2228 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:19:34 2019